httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "S. Wong" <sw...@webprincess-designs.com>
Subject Re: Where to put <directory>
Date Mon, 20 May 2002 04:23:06 GMT
Then have your Apache admin to allowoverride for your virtual host.

<VirtualHost yourhost.yourdomain.nnn>
  AllowOverride All
</VirtualHost>

Octavian Rasnita wrote:

> Yes, but unfortunately I am not the web server owner, and they want to give
> this option only for my virtual host, not for all the web server root
> directory.
>
> Teddy,
> orasnita@home.ro
>
> ----- Original Message -----
> From: "S. Wong" <swong@webprincess-designs.com>
> To: <users@httpd.apache.org>
> Sent: Sunday, May 19, 2002 6:02 PM
> Subject: Re: Where to put <directory>
>
> I think it has to do with the line in your AllowOverride None in :
>
> <Directory "/var/www/*/html">
>
> #
> # This may also be "None", "All", or any combination of "Indexes",
> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options
> All"
> # doesn't give it to you.
> #
>     Options Indexes Includes FollowSymLinks
>
> #
> # This controls which options the .htaccess files in directories can
> # override. Can also be "All", or any combination of "Options",
> "FileInfo",
> # "AuthConfig", and "Limit"
> #
>     AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
>     Order allow,deny
>     Allow from all
> </Directory>
>
> Set it to at the very least AllowOverride Options
>
> Octavian Rasnita wrote:
>
> > Hi, thanks again.
> >
> > Here is the .htaccess file I use and the httpd.conf file.
> >
> > The .htaccess file:
> >
> > Options FollowSymLinks Multiviews Includes -Indexes
> > #I have tried without -Indexes also.
> >
> > I've tried to put the .htaccess file in /var/www/teddy/html directory
> where
> > is my host root and in each directory under this one.
> >
> > I don't think the .htaccess file is important because doesn't matter what
> I
> > change in it, it doesn't work.
> > I have also tried putting the following lines in the .htaccess file in the
> > root directory with no effect:
> > Options none
> > Order allow,deny
> > Deny from all
> >
> > ... and I still can see all the files and folders, indexes, etc.
> >
> > I think the problem could be the rights I have assigned for my directories
> > or the httpd.conf file.
> >
> > If I assign 755, for the html directories, I can see them, but if I assign
> > 744 or 644, I can't see and access any folder or directory.
> > It give me the 403 error "Access denied" even though I should see the
> files
> > if I have read rights.
> >
> > Here below is the httpd.conf file.
> > Thank you very very much for help.
> >
> > ##
> > ## httpd.conf -- Apache HTTP server configuration file
> > ##
> >
> > #
> > # Based upon the NCSA server configuration files originally by Rob McCool.
> > #
> > # This is the main Apache server configuration file.  It contains the
> > # configuration directives that give the server its instructions.
> > # See <URL:http://www.apache.org/docs/> for detailed information about
> > # the directives.
> > #
> > # Do NOT simply read the instructions in here without understanding
> > # what they do.  They're here only as hints or reminders.  If you are
> unsure
> > # consult the online docs. You have been warned.
> > #
> > # After this file is processed, the server will look for and process
> > # /usr/conf/srm.conf and then /usr/conf/access.conf
> > # unless you have overridden these with ResourceConfig and/or
> > # AccessConfig directives here.
> > #
> > # The configuration directives are grouped into three basic sections:
> > #  1. Directives that control the operation of the Apache server process
> as
> > a
> > #     whole (the 'global environment').
> > #  2. Directives that define the parameters of the 'main' or 'default'
> > server,
> > #     which responds to requests that aren't handled by a virtual host.
> > #     These directives also provide default values for the settings
> > #     of all virtual hosts.
> > #  3. Settings for virtual hosts, which allow Web requests to be sent to
> > #     different IP addresses or hostnames and have them handled by the
> > #     same Apache server process.
> > #
> > # Configuration and logfile names: If the filenames you specify for many
> > # of the server's control files begin with "/" (or "drive:/" for Win32),
> the
> > # server will use that explicit path.  If the filenames do *not* begin
> > # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> > # with ServerRoot set to "/usr/local/apache" will be interpreted by the
> > # server as "/usr/local/apache/logs/foo.log".
> > #
> >
> > ### Section 1: Global Environment
> > #
> > # The directives in this section affect the overall operation of Apache,
> > # such as the number of concurrent requests it can handle or where it
> > # can find its configuration files.
> > #
> >
> > #
> > # ServerType is either inetd, or standalone.  Inetd mode is only supported
> > on
> > # Unix platforms.
> > #
> > ServerType standalone
> >
> > #
> > # ServerRoot: The top of the directory tree under which the server's
> > # configuration, error, and log files are kept.
> > #
> > # NOTE!  If you intend to place this on an NFS (or otherwise network)
> > # mounted filesystem then please read the LockFile documentation
> > # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
> > # you will save yourself a lot of trouble.
> > #
> > # Do NOT add a slash at the end of the directory path.
> > #
> > ServerRoot "/etc/httpd"
> >
> > #
> > # The LockFile directive sets the path to the lockfile used when Apache
> > # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
> > # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
> > # its default value. The main reason for changing it is if the logs
> > # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
> > # DISK. The PID of the main server process is automatically appended to
> > # the filename.
> > #
> > LockFile /var/lock/httpd.lock
> >
> > #
> > # PidFile: The file in which the server should record its process
> > # identification number when it starts.
> > #
> > PidFile /var/run/httpd.pid
> >
> > #
> > # ScoreBoardFile: File used to store internal server process information.
> > # Not all architectures require this.  But if yours does (you'll know
> > because
> > # this file will be  created when you run Apache) then you *must* ensure
> > that
> > # no two invocations of Apache share the same scoreboard file.
> > #
> > ScoreBoardFile /var/run/httpd.scoreboard
> >
> > #
> > # In the standard configuration, the server will process this file,
> > # srm.conf, and access.conf in that order.  The latter two files are
> > # now distributed empty, as it is recommended that all directives
> > # be kept in a single file for simplicity.  The commented-out values
> > # below are the built-in defaults.  You can have the server ignore
> > # these files altogether by using "/dev/null" (for Unix) or
> > # "nul" (for Win32) for the arguments to the directives.
> > #
> > #ResourceConfig conf/srm.conf
> > #AccessConfig conf/access.conf
> >
> > #
> > # Timeout: The number of seconds before receives and sends time out.
> > #
> > Timeout 300
> >
> > #
> > # KeepAlive: Whether or not to allow persistent connections (more than
> > # one request per connection). Set to "Off" to deactivate.
> > #
> > KeepAlive On
> >
> > #
> > # MaxKeepAliveRequests: The maximum number of requests to allow
> > # during a persistent connection. Set to 0 to allow an unlimited amount.
> > # We recommend you leave this number high, for maximum performance.
> > #
> > MaxKeepAliveRequests 100
> >
> > #
> > # KeepAliveTimeout: Number of seconds to wait for the next request from
> the
> > # same client on the same connection.
> > #
> > KeepAliveTimeout 15
> >
> > #
> > # Server-pool size regulation.  Rather than making you guess how many
> > # server processes you need, Apache dynamically adapts to the load it
> > # sees --- that is, it tries to maintain enough server processes to
> > # handle the current load, plus a few spare servers to handle transient
> > # load spikes (e.g., multiple simultaneous requests from a single
> > # Netscape browser).
> > #
> > # It does this by periodically checking how many servers are waiting
> > # for a request.  If there are fewer than MinSpareServers, it creates
> > # a new spare.  If there are more than MaxSpareServers, some of the
> > # spares die off.  The default values are probably OK for most sites.
> > #
> > MinSpareServers 5
> > MaxSpareServers 20
> >
> > #
> > # Number of servers to start initially --- should be a reasonable ballpark
> > # figure.
> > #
> > StartServers 8
> >
> > #
> > # Limit on total number of servers running, i.e., limit on the number
> > # of clients who can simultaneously connect --- if this limit is ever
> > # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
> > # It is intended mainly as a brake to keep a runaway server from taking
> > # the system with it as it spirals down...
> > #
> > MaxClients 150
> >
> > #
> > # MaxRequestsPerChild: the number of requests each child process is
> > # allowed to process before the child dies.  The child will exit so
> > # as to avoid problems after prolonged use when Apache (and maybe the
> > # libraries it uses) leak memory or other resources.  On most systems,
> this
> > # isn't really needed, but a few (such as Solaris) do have notable leaks
> > # in the libraries. For these platforms, set to something like 10000
> > # or so; a setting of 0 means unlimited.
> > #
> > # NOTE: This value does not include keepalive requests after the initial
> > #       request per connection. For example, if a child process handles
> > #       an initial request and 10 subsequent "keptalive" requests, it
> > #       would only count as 1 request towards this limit.
> > #
> > MaxRequestsPerChild 100
> >
> > #
> > # Listen: Allows you to bind Apache to specific IP addresses and/or
> > # ports, in addition to the default. See also the <VirtualHost>
> > # directive.
> > #
> > #Listen 3000
> > #Listen 12.34.56.78:80
> > Listen 80
> >
> > #
> > # BindAddress: You can support virtual hosts with this option. This
> > directive
> > # is used to tell the server which IP address to listen to. It can either
> > # contain "*", an IP address, or a fully qualified Internet domain name.
> > # See also the <VirtualHost> and Listen directives.
> > #
> > #BindAddress *
> >
> > #
> > # Dynamic Shared Object (DSO) Support
> > #
> > # To be able to use the functionality of a module which was built as a DSO
> > you
> > # have to place corresponding `LoadModule' lines at this location so the
> > # directives contained in it are actually available _before_ they are
> used.
> > # Please read the file README.DSO in the Apache 1.3 distribution for more
> > # details about the DSO mechanism and run `httpd -l' for the list of
> already
> > # built-in (statically linked and thus always available) modules in your
> > httpd
> > # binary.
> > #
> > # Note: The order is which modules are loaded is important.  Don't change
> > # the order below without expert advice.
> > #
> > # Example:
> > # LoadModule foo_module modules/mod_foo.so
> >
> > #LoadModule mmap_static_module modules/mod_mmap_static.so
> > LoadModule vhost_alias_module modules/mod_vhost_alias.so
> > LoadModule env_module         modules/mod_env.so
> > LoadModule config_log_module  modules/mod_log_config.so
> > LoadModule agent_log_module   modules/mod_log_agent.so
> > LoadModule referer_log_module modules/mod_log_referer.so
> > #LoadModule mime_magic_module  modules/mod_mime_magic.so
> > LoadModule mime_module        modules/mod_mime.so
> > LoadModule negotiation_module modules/mod_negotiation.so
> > LoadModule status_module      modules/mod_status.so
> > LoadModule info_module        modules/mod_info.so
> > LoadModule includes_module    modules/mod_include.so
> > LoadModule autoindex_module   modules/mod_autoindex.so
> > LoadModule dir_module         modules/mod_dir.so
> > LoadModule cgi_module         modules/mod_cgi.so
> > LoadModule asis_module        modules/mod_asis.so
> > LoadModule imap_module        modules/mod_imap.so
> > LoadModule action_module      modules/mod_actions.so
> > #LoadModule speling_module     modules/mod_speling.so
> > LoadModule userdir_module     modules/mod_userdir.so
> > LoadModule alias_module       modules/mod_alias.so
> > LoadModule rewrite_module     modules/mod_rewrite.so
> > LoadModule access_module      modules/mod_access.so
> > LoadModule auth_module        modules/mod_auth.so
> > LoadModule anon_auth_module   modules/mod_auth_anon.so
> > LoadModule db_auth_module     modules/mod_auth_db.so
> > #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
> > #LoadModule auth_ldap_module   modules/mod_auth_ldap.so
> > #LoadModule digest_module      modules/mod_digest.so
> > #LoadModule proxy_module       modules/libproxy.so
> > #LoadModule cern_meta_module   modules/mod_cern_meta.so
> > LoadModule expires_module     modules/mod_expires.so
> > LoadModule headers_module     modules/mod_headers.so
> > #LoadModule usertrack_module   modules/mod_usertrack.so
> > #LoadModule example_module     modules/mod_example.so
> > #LoadModule unique_id_module   modules/mod_unique_id.so
> > LoadModule setenvif_module    modules/mod_setenvif.so
> > #LoadModule bandwidth_module   modules/mod_bandwidth.so
> > #LoadModule put_module        modules/mod_put.so
> > #LoadModule throttle_module    modules/mod_throttle.so
> > #LoadModule define_module      modules/mod_define.so
> > <IfDefine HAVE_PERL>
> > LoadModule perl_module        modules/libperl.so
> > </IfDefine>
> > <IfDefine HAVE_PHP>
> > LoadModule php_module         modules/mod_php.so
> > </IfDefine>
> > <IfDefine HAVE_PHP3>
> > LoadModule php3_module        modules/libphp3.so
> > </IfDefine>
> > <IfDefine HAVE_PHP4>
> > LoadModule php4_module        modules/libphp4.so
> > </IfDefine>
> > <IfDefine HAVE_DAV>
> > LoadModule dav_module         modules/libdav.so
> > </IfDefine>
> > <IfDefine HAVE_ROAMING>
> > LoadModule roaming_module     modules/mod_roaming.so
> > </IfDefine>
> > <IfDefine HAVE_SSL>
> > LoadModule ssl_module         modules/libssl.so
> > </IfDefine>
> >
> > #  Reconstruction of the complete module list from all available modules
> > #  (static and shared ones) to achieve correct module execution order.
> > #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
> > ClearModuleList
> > #AddModule mod_mmap_static.c
> > AddModule mod_vhost_alias.c
> > AddModule mod_env.c
> > AddModule mod_log_config.c
> > AddModule mod_log_agent.c
> > AddModule mod_log_referer.c
> > #AddModule mod_mime_magic.c
> > AddModule mod_mime.c
> > AddModule mod_negotiation.c
> > AddModule mod_status.c
> > AddModule mod_info.c
> > AddModule mod_include.c
> > AddModule mod_autoindex.c
> > AddModule mod_dir.c
> > AddModule mod_cgi.c
> > AddModule mod_asis.c
> > AddModule mod_imap.c
> > AddModule mod_actions.c
> > #AddModule mod_speling.c
> > AddModule mod_userdir.c
> > AddModule mod_alias.c
> > AddModule mod_rewrite.c
> > AddModule mod_access.c
> > AddModule mod_auth.c
> > AddModule mod_auth_anon.c
> > AddModule mod_auth_db.c
> > #AddModule mod_digest.c
> > #AddModule mod_proxy.c
> > #AddModule mod_cern_meta.c
> > AddModule mod_expires.c
> > AddModule mod_headers.c
> > #AddModule mod_usertrack.c
> > #AddModule mod_example.c
> > #AddModule mod_unique_id.c
> > AddModule mod_so.c
> > AddModule mod_setenvif.c
> > #AddModule mod_bandwidth.c
> > #AddModule mod_put.c
> > <IfDefine HAVE_PERL>
> > AddModule mod_perl.c
> > </IfDefine>
> > <IfDefine HAVE_PHP>
> > AddModule mod_php.c
> > </IfDefine>
> > <IfDefine HAVE_PHP3>
> > AddModule mod_php3.c
> > </IfDefine>
> > <IfDefine HAVE_PHP4>
> > AddModule mod_php4.c
> > </IfDefine>
> > <IfDefine HAVE_DAV>
> > AddModule mod_dav.c
> > </IfDefine>
> > <IfDefine HAVE_ROAMING>
> > AddModule mod_roaming.c
> > </IfDefine>
> > <IfDefine HAVE_SSL>
> > AddModule mod_ssl.c
> > </IfDefine>
> >
> > #
> > # ExtendedStatus: controls whether Apache will generate "full" status
> > # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> > # Off) when the "server-status" handler is called. The default is Off.
> > #
> > #ExtendedStatus On
> >
> > ### Section 2: 'Main' server configuration
> > #
> > # The directives in this section set up the values used by the 'main'
> > # server, which responds to any requests that aren't handled by a
> > # <VirtualHost> definition.  These values also provide defaults for
> > # any <VirtualHost> containers you may define later in the file.
> > #
> > # All of these directives may appear inside <VirtualHost> containers,
> > # in which case these default settings will be overridden for the
> > # virtual host being defined.
> > #
> >
> > #
> > # If your ServerType directive (set earlier in the 'Global Environment'
> > # section) is set to "inetd", the next few directives don't have any
> > # effect since their settings are defined by the inetd configuration.
> > # Skip ahead to the ServerAdmin directive.
> > #
> >
> > #
> > # Port: The port to which the standalone server listens. For
> > # ports < 1023, you will need httpd to be run as root initially.
> > #
> > #Port 80
> >
> > #
> > # If you wish httpd to run as a different user or group, you must run
> > # httpd as root initially and it will switch.
> > #
> > # User/Group: The name (or #number) of the user/group to run httpd as.
> > #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> > #  . On HPUX you may not be able to use shared memory as nobody, and the
> > #    suggested workaround is to create a user www and use that user.
> > #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> > #  when the value of (unsigned)Group is above 60000;
> > #  don't use Group nobody on these systems!
> > #
> > User apache
> > Group apache
> >
> > #
> > # ServerAdmin: Your address, where problems with the server should be
> > # e-mailed.  This address appears on some server-generated pages, such
> > # as error documents.
> > #
> > ServerAdmin root@localhost
> >
> > #
> > # ServerName: allows you to set a host name which is sent back to clients
> > for
> > # your server if it's different than the one the program would get (i.e.,
> > use
> > # "www" instead of the host's real name).
> > #
> > # Note: You cannot just invent host names and hope they work. The name you
> > # define here must be a valid DNS name for your host. If you don't
> > understand
> > # this, ask your network administrator.
> > # If your host doesn't have a registered DNS name, enter its IP address
> > here.
> > # You will have to access it by its address (e.g., http://123.45.67.89/)
> > # anyway, and this will make redirections work in a sensible way.
> > #
> > #ServerName localhost
> >
> > #
> > # DocumentRoot: The directory out of which you will serve your
> > # documents. By default, all requests are taken from this directory, but
> > # symbolic links and aliases may be used to point to other locations.
> > #
> > DocumentRoot "/var/www/html"
> >
> > #
> > # Each directory to which Apache has access, can be configured with
> respect
> > # to which services and features are allowed and/or disabled in that
> > # directory (and its subdirectories).
> > #
> > # First, we configure the "default" to be a very restrictive set of
> > # permissions.
> > #
> > <Directory />
> >     Options FollowSymLinks
> >     AllowOverride None
> > </Directory>
> >
> > #
> > # Note that from this point forward you must specifically allow
> > # particular features to be enabled - so if something's not working as
> > # you might expect, make sure that you have specifically enabled it
> > # below.
> > #
> >
> > #
> > # This should be changed to whatever you set DocumentRoot to.
> > #
> > <Directory "/var/www/*/html">
> >
> > #
> > # This may also be "None", "All", or any combination of "Indexes",
> > # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
> > #
> > # Note that "MultiViews" must be named *explicitly* --- "Options All"
> > # doesn't give it to you.
> > #
> >     Options Indexes Includes FollowSymLinks
> >
> > #
> > # This controls which options the .htaccess files in directories can
> > # override. Can also be "All", or any combination of "Options",
> "FileInfo",
> > # "AuthConfig", and "Limit"
> > #
> >     AllowOverride None
> >
> > #
> > # Controls who can get stuff from this server.
> > #
> >     Order allow,deny
> >     Allow from all
> > </Directory>
> >
> > #
> > # UserDir: The name of the directory which is appended onto a user's home
> > # directory if a ~user request is received.
> > #
> > # The path to the end user account 'public_html' directory must be
> > # accessible to the webserver userid.  This usually means that ~userid
> > # must have permissions of 711, ~userid/public_html must have permissions
> > # of 755, and documents contained therein must be world-readable.
> > # Otherwise, the client will only receive a "403 Forbidden" message.
> > #
> > # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
> > #
> > #UserDir phtml
> >
> > #
> > # Control access to UserDir directories.  The following is an example
> > # for a site where these directories are restricted to read-only.
> > #
> > #<Directory /home/*/html>
> > #    AllowOverride FileInfo AuthConfig Limit
> > #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> > #    <Limit GET POST OPTIONS PROPFIND>
> > #        Order allow,deny
> > #        Allow from all
> > #    </Limit>
> > #    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
> > #        Order deny,allow
> > #        Deny from all
> > #    </Limit>
> > #</Directory>
> >
> > #
> > # DirectoryIndex: Name of the file or files to use as a pre-written HTML
> > # directory index.  Separate multiple entries with spaces.
> > #
> > DirectoryIndex index.html index.htm index.shtml index.php index.php4
> > index.php3 index.cgi index.pl
> >
> > #
> > # AccessFileName: The name of the file to look for in each directory
> > # for access control information.
> > #
> > AccessFileName .htaccess
> >
> > #
> > # The following lines prevent .htaccess files from being viewed by
> > # Web clients.  Since .htaccess files often contain authorization
> > # information, access is disallowed for security reasons.  Comment
> > # these lines out if you want Web visitors to see the contents of
> > # .htaccess files.  If you change the AccessFileName directive above,
> > # be sure to make the corresponding changes here.
> > #
> > # Also, folks tend to use names such as .htpasswd for password
> > # files, so this will protect those as well.
> > #
> > <Files ~ "^\.ht">
> >     Order allow,deny
> >     Deny from all
> > </Files>
> >
> > #
> > # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
> each
> > # document that was negotiated on the basis of content. This asks proxy
> > # servers not to cache the document. Uncommenting the following line
> > disables
> > # this behavior, and proxies will be allowed to cache the documents.
> > #
> > #CacheNegotiatedDocs
> >
> > #
> > # UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
> > # Apache needs to construct a self-referencing URL (a URL that refers back
> > # to the server the response is coming from) it will use ServerName and
> > # Port to form a "canonical" name.  With this setting off, Apache will
> > # use the hostname:port that the client supplied, when possible.  This
> > # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
> > #
> > UseCanonicalName On
> >
> > #
> > # TypesConfig describes where the mime.types file (or equivalent) is
> > # to be found.
> > #
> > TypesConfig /etc/mime.types
> >
> > #
> > # DefaultType is the default MIME type the server will use for a document
> > # if it cannot otherwise determine one, such as from filename extensions.
> > # If your server contains mostly text or HTML documents, "text/plain" is
> > # a good value.  If most of your content is binary, such as applications
> > # or images, you may want to use "application/octet-stream" instead to
> > # keep browsers from trying to display binary files as though they are
> > # text.
> > #
> > DefaultType text/plain
> >
> > #
> > # The mod_mime_magic module allows the server to use various hints from
> the
> > # contents of the file itself to determine its type.  The MIMEMagicFile
> > # directive tells the module where the hint definitions are located.
> > # mod_mime_magic is not part of the default server (you have to add
> > # it yourself with a LoadModule [see the DSO paragraph in the 'Global
> > # Environment' section], or recompile the server and include
> mod_mime_magic
> > # as part of the configuration), so it's enclosed in an <IfModule>
> > container.
> > # This means that the MIMEMagicFile directive will only be processed if
> the
> > # module is part of the server.
> > #
> > <IfModule mod_mime_magic.c>
> >     MIMEMagicFile conf/magic
> > </IfModule>
> >
> > #
> > # HostnameLookups: Log the names of clients or just their IP addresses
> > # e.g., www.apache.org (on) or 204.62.129.132 (off).
> > # The default is off because it'd be overall better for the net if people
> > # had to knowingly turn this feature on, since enabling it means that
> > # each client request will result in AT LEAST one lookup request to the
> > # nameserver.
> > #
> > HostnameLookups Off
> >
> > #
> > # ErrorLog: The location of the error log file.
> > # If you do not specify an ErrorLog directive within a <VirtualHost>
> > # container, error messages relating to that virtual host will be
> > # logged here.  If you *do* define an error logfile for a <VirtualHost>
> > # container, that host's errors will be logged there and not here.
> > #
> > ErrorLog /var/log/httpd/error_log
> >
> > #
> > # LogLevel: Control the number of messages logged to the error_log.
> > # Possible values include: debug, info, notice, warn, error, crit,
> > # alert, emerg.
> > #
> > LogLevel warn
> >
> > #
> > # The following directives define some format nicknames for use with
> > # a CustomLog directive (see below).
> > #
> > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
> > combined
> > LogFormat "%h %l %u %t \"%r\" %>s %b" common
> > LogFormat "%{Referer}i -> %U" referer
> > LogFormat "%{User-agent}i" agent
> >
> > #
> > # The location and format of the access logfile (Common Logfile Format).
> > # If you do not define any access logfiles within a <VirtualHost>
> > # container, they will be logged here.  Contrariwise, if you *do*
> > # define per-<VirtualHost> access logfiles, transactions will be
> > # logged therein and *not* in this file.
> > #
> > CustomLog /var/log/httpd/access_log common
> > #CustomLog /var/log/httpd/access_log combined
> >
> > #
> > # If you would like to have agent and referer logfiles, uncomment the
> > # following directives.
> > #
> > #CustomLog /var/log/httpd/referer_log referer
> > #CustomLog /var/log/httpd/agent_log agent
> >
> > #
> > # If you prefer a single logfile with access, agent, and referer
> information
> > # (Combined Logfile Format) you can use the following directive.
> > #
> > #CustomLog /var/log/httpd/access_log combined
> >
> > #
> > # Optionally add a line containing the server version and virtual host
> > # name to server-generated pages (error documents, FTP directory listings,
> > # mod_status and mod_info output etc., but not CGI generated documents).
> > # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> > # Set to one of:  On | Off | EMail
> > #
> > ServerSignature EMail
> >
> > #
> > # Aliases: Add here as many aliases as you need (with no limit). The
> format
> > is
> > # Alias fakename realname
> > #
> > # Note that if you include a trailing / on fakename then the server will
> > # require it to be present in the URL.  So "/icons" isn't aliased in this
> > # example, only "/icons/"..
> > #
> > Alias /icons/ "/var/www/icons/"
> >
> > <Directory "/var/www/icons">
> >     Options Indexes MultiViews
> >     AllowOverride None
> >     Order allow,deny
> >     Allow from all
> > </Directory>
> >
> > #
> > # ScriptAlias: This controls which directories contain server scripts.
> > # ScriptAliases are essentially the same as Aliases, except that
> > # documents in the realname directory are treated as applications and
> > # run by the server when requested rather than as documents sent to the
> > client.
> > # The same rules about trailing "/" apply to ScriptAlias directives as to
> > # Alias.
> > #
> > #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
> >
> > #
> > # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
> > # CGI directory exists, if you have that configured.
> > #
> > <Directory "/var/www/cgi-bin">
> >     AllowOverride None
> >     Options ExecCGI
> >     Order allow,deny
> >     Allow from all
> > </Directory>
> >
> > #
> > # Redirect allows you to tell clients about documents which used to exist
> in
> > # your server's namespace, but do not anymore. This allows you to tell the
> > # clients where to look for the relocated document.
> > # Format: Redirect old-URI new-URL
> > #
> >
> > #
> > # Directives controlling the display of server-generated directory
> listings.
> > #
> >
> > #
> > # FancyIndexing: whether you want fancy directory indexing or standard
> > #
> > IndexOptions FancyIndexing
> >
> > #
> > # AddIcon* directives tell the server which icon to show for different
> > # files or filename extensions.  These are only displayed for
> > # FancyIndexed directories.
> > #
> > AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
> >
> > AddIconByType (TXT,/icons/text.gif) text/*
> > AddIconByType (IMG,/icons/image2.gif) image/*
> > AddIconByType (SND,/icons/sound2.gif) audio/*
> > AddIconByType (VID,/icons/movie.gif) video/*
> >
> > AddIcon /icons/binary.gif .bin .exe
> > AddIcon /icons/binhex.gif .hqx
> > AddIcon /icons/tar.gif .tar
> > AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> > AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> > AddIcon /icons/a.gif .ps .ai .eps
> > AddIcon /icons/layout.gif .html .shtml .htm .pdf
> > AddIcon /icons/text.gif .txt
> > AddIcon /icons/c.gif .c
> > AddIcon /icons/p.gif .pl .py
> > AddIcon /icons/f.gif .for
> > AddIcon /icons/dvi.gif .dvi
> > AddIcon /icons/uuencoded.gif .uu
> > AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> > AddIcon /icons/tex.gif .tex
> > AddIcon /icons/bomb.gif core
> >
> > AddIcon /icons/back.gif ..
> > AddIcon /icons/hand.right.gif README
> > AddIcon /icons/folder.gif ^^DIRECTORY^^
> > AddIcon /icons/blank.gif ^^BLANKICON^^
> >
> > #
> > # DefaultIcon: which icon to show for files which do not have an icon
> > # explicitly set.
> > #
> > DefaultIcon /icons/unknown.gif
> >
> > #
> > # AddDescription: allows you to place a short description after a file in
> > # server-generated indexes.  These are only displayed for FancyIndexed
> > # directories.
> > # Format: AddDescription "description" filename
> > #
> > #AddDescription "GZIP compressed document" .gz
> > #AddDescription "tar archive" .tar
> > #AddDescription "GZIP compressed tar archive" .tgz
> >
> > #
> > # ReadmeName: the name of the README file the server will look for by
> > # default, and append to directory listings.
> > #
> > # HeaderName: the name of a file which should be prepended to
> > # directory indexes.
> > #
> > # The server will first look for name.html and include it if found.
> > # If name.html doesn't exist, the server will then look for name.txt
> > # and include it as plaintext if found.
> > #
> > ReadmeName README.html
> > HeaderName HEADER.html
> >
> > #
> > # IndexIgnore: a set of filenames which directory indexing should ignore
> > # and not include in the listing.  Shell-style wildcarding is permitted.
> > #
> > IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
> >
> > #
> > # AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+)
> > uncompress
> > # information on the fly. Note: Not all browsers support this.
> > # Despite the name similarity, the following Add* directives have nothing
> > # to do with the FancyIndexing customization directives above.
> > #
> > AddEncoding x-compress Z
> > AddEncoding x-gzip gz tgz
> >
> > #
> > # AddLanguage: allows you to specify the language of a document. You can
> > # then use content negotiation to give a browser a file in a language
> > # it can understand.  Note that the suffix does not have to be the same
> > # as the language keyword --- those with documents in Polish (whose
> > # net-standard language code is pl) may wish to use "AddLanguage pl .po"
> > # to avoid the ambiguity with the common suffix for perl scripts.
> > #
> > AddLanguage en .en
> > AddLanguage fr .fr
> > AddLanguage de .de
> > AddLanguage da .da
> > AddLanguage el .el
> > AddLanguage it .it
> >
> > #
> > # LanguagePriority: allows you to give precedence to some languages
> > # in case of a tie during content negotiation.
> > # Just list the languages in decreasing order of preference.
> > #
> > LanguagePriority en fr de
> >
> > #
> > # AddType: allows you to tweak mime.types without actually editing it, or
> to
> > # make certain files to be certain types.
> > #
> > # The following is for PHP4 (conficts with PHP/FI, below):
> > <IfModule mod_php4.c>
> >   AddType application/x-httpd-php .php4 .php3 .phtml .php
> >   AddType application/x-httpd-php-source .phps
> > </IfModule>
> >
> > # The following is for PHP3:
> > <IfModule mod_php3.c>
> >   AddType application/x-httpd-php3 .php3
> >   AddType application/x-httpd-php3-source .phps
> > </IfModule>
> >
> > # The following is for PHP/FI (PHP2):
> > <IfModule mod_php.c>
> >   AddType application/x-httpd-php .phtml
> > </IfModule>
> >
> > AddType application/x-tar .tgz
> >
> > #
> > # AddHandler: allows you to map certain file extensions to "handlers",
> > # actions unrelated to filetype. These can be either built into the server
> > # or added with the Action command (see below)
> > #
> > # If you want to use server side includes, or CGI outside
> > # ScriptAliased directories, uncomment the following lines.
> > #
> > # To use CGI scripts:
> > #
> > AddHandler cgi-script .cgi .pl
> >
> > #
> > # To use server-parsed HTML files
> > #
> > AddType text/html .shtml
> > AddHandler server-parsed .shtml
> >
> > #
> > # Uncomment the following line to enable Apache's send-asis HTTP file
> > # feature
> > #
> > #AddHandler send-as-is asis
> >
> > #
> > # If you wish to use server-parsed imagemap files, use
> > #
> > AddHandler imap-file map
> >
> > #
> > # To enable type maps, you might want to use
> > #
> > #AddHandler type-map var
> >
> > #
> > # Action: lets you define media types that will execute a script whenever
> > # a matching file is called. This eliminates the need for repeated URL
> > # pathnames for oft-used CGI file processors.
> > # Format: Action media/type /cgi-script/location
> > # Format: Action handler-name /cgi-script/location
> > #
> >
> > #
> > # MetaDir: specifies the name of the directory in which Apache can find
> > # meta information files. These files contain additional HTTP headers
> > # to include when sending the document
> > #
> > #MetaDir .web
> >
> > #
> > # MetaSuffix: specifies the file name suffix for the file containing the
> > # meta information.
> > #
> > #MetaSuffix .meta
> >
> > #
> > # Customizable error response (Apache style)
> > #  these come in three flavors
> > #
> > #    1) plain text
> > #ErrorDocument 500 "The server made a boo boo.
> > #  n.b.  the (") marks it as text, it does not get output
> > #
> > #    2) local redirects
> > #ErrorDocument 404 /missing.html
> > #  to redirect to local URL /missing.html
> > #ErrorDocument 404 /cgi-bin/missing_handler.pl
> > #  N.B.: You can redirect to a script or a document using
> > server-side-includes.
> > #
> > #    3) external redirects
> > #ErrorDocument 402 http://some.other_server.com/subscription_info.html
> > #  N.B.: Many of the environment variables associated with the original
> > #  request will *not* be available to such a script.
> >
> > #
> > # The following directives modify normal HTTP response behavior.
> > # The first directive disables keepalive for Netscape 2.x and browsers
> that
> > # spoof it. There are known problems with these browser implementations.
> > # The second directive is for Microsoft Internet Explorer 4.0b2
> > # which has a broken HTTP/1.1 implementation and does not properly
> > # support keepalive when it is used on 301 or 302 (redirect) responses.
> > #
> > BrowserMatch "Mozilla/2" nokeepalive
> > BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
> >
> > #
> > # The following directive disables HTTP/1.1 responses to browsers which
> > # are in violation of the HTTP/1.0 spec by not being able to grok a
> > # basic 1.1 response.
> > #
> > BrowserMatch "RealPlayer 4\.0" force-response-1.0
> > BrowserMatch "Java/1\.0" force-response-1.0
> > BrowserMatch "JDK/1\.0" force-response-1.0
> >
> > # If the perl module is installed, this will be enabled.
> > <IfModule mod_perl.c>
> >   Alias /perl/ /var/www/perl/
> >   <Location /perl>
> >     SetHandler perl-script
> >     PerlHandler Apache::Registry
> >     Options +ExecCGI
> >   </Location>
> > </IfModule>
> >
> > #
> > # Allow http put (such as Netscape Gold's publish feature)
> > # Use htpasswd to generate /etc/httpd/conf/passwd.
> > # You must unremark these two lines at the top of this file as well:
> > #LoadModule put_module  modules/mod_put.so
> > #AddModule mod_put.c
> > #
> > #Alias /upload /tmp
> > #<Location /upload>
> > #    EnablePut On
> > #    AuthType Basic
> > #    AuthName Temporary
> > #    AuthUserFile /etc/httpd/conf/passwd
> > #    EnableDelete Off
> > #    umask 007
> > #    <Limit PUT>
> > # require valid-user
> > #    </Limit>
> > #</Location>
> >
> > #
> > # Allow server status reports, with the URL of
> > http://servername/server-status
> > # Change the ".your_domain.com" to match your domain to enable.
> > #
> > #<Location /server-status>
> > #    SetHandler server-status
> > #    Order deny,allow
> > #    Deny from all
> > #    Allow from .your_domain.com
> > #</Location>
> >
> > #
> > # Allow remote server configuration reports, with the URL of
> > #  http://servername/server-info (requires that mod_info.c be loaded).
> > # Change the ".your_domain.com" to match your domain to enable.
> > #
> > #<Location /server-info>
> > #    SetHandler server-info
> > #    Order deny,allow
> > #    Deny from all
> > #    Allow from .your_domain.com
> > #</Location>
> >
> > # Allow access to local system documentation from localhost
> > Alias /doc/ /usr/share/doc/
> > <Location /doc>
> >   order deny,allow
> >   deny from all
> >   allow from localhost .localdomain
> >   Options Indexes FollowSymLinks
> > </Location>
> >
> > #
> > # There have been reports of people trying to abuse an old bug from
> pre-1.1
> > # days.  This bug involved a CGI script distributed as a part of Apache.
> > # By uncommenting these lines you can redirect these attacks to a logging
> > # script on phf.apache.org.  Or, you can record them yourself, using the
> > script
> > # support/phf_abuse_log.cgi.
> > #
> > #<Location /cgi-bin/phf*>
> > #    Deny from all
> > #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
> > #</Location>
> >
> > #
> > # Proxy Server directives. Uncomment the following lines to
> > # enable the proxy server:
> > #
> > #<IfModule mod_proxy.c>
> > #ProxyRequests On
> > #
> > #<Directory proxy:*>
> > #    Order deny,allow
> > #    Deny from all
> > #    Allow from .your_domain.com
> > #</Directory>
> >
> > #
> > # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> > # ("Full" adds the server version; "Block" removes all outgoing Via:
> > headers)
> > # Set to one of: Off | On | Full | Block
> > #
> > #ProxyVia On
> >
> > #
> > # To enable the cache as well, edit and uncomment the following lines:
> > # (no cacheing without CacheRoot)
> > #
> > #CacheRoot "/var/cache/httpd"
> > #CacheSize 5
> > #CacheGcInterval 4
> > #CacheMaxExpire 24
> > #CacheLastModifiedFactor 0.1
> > #CacheDefaultExpire 1
> > #NoCache a_domain.com another_domain.edu joes.garage_sale.com
> >
> > #</IfModule>
> > # End of proxy directives.
> >
> > ### Section 3: Virtual Hosts
> > #
> > # VirtualHost: If you want to maintain multiple domains/hostnames on your
> > # machine you can setup VirtualHost containers for them.
> > # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
> > # for further details before you try to setup virtual hosts.
> > # You may use the command line option '-S' to verify your virtual host
> > # configuration.
> >
> > #
> > # If you want to use name-based virtual hosts you need to define at
> > # least one IP address (and port number) for them.
> > #
> > #NameVirtualHost 12.34.56.78:80
> > #NameVirtualHost 12.34.56.78
> >
> > #
> > # VirtualHost example:
> > # Almost any Apache directive may go into a VirtualHost container.
> > #
> > #<VirtualHost ip.address.of.host.some_domain.com>
> > #    ServerAdmin webmaster@host.some_domain.com
> > #    DocumentRoot /www/docs/host.some_domain.com
> > #    ServerName host.some_domain.com
> > #    ErrorLog logs/host.some_domain.com-error_log
> > #    CustomLog logs/host.some_domain.com-access_log common
> > #</VirtualHost>
> >
> > #<VirtualHost _default_:*>
> > #</VirtualHost>
> >
> > <IfDefine HAVE_SSL>
> > ##
> > ## SSL Virtual Host Context
> > ##
> >
> > #  Apache will only listen on port 80 by default.  Defining the virtual
> > server
> > #  (below) won't make it automatically listen on the virtual server's
> port.
> > Listen 443
> >
> > #   SSL Session Cache:
> > #   The cache speeds up processing of multiple parallel requests from
> > #   the same client.
> > SSLSessionCache shm:/var/cache/ssl_gcache_data(524288)
> >
> > <VirtualHost _default_:443>
> >
> > #  General setup for the virtual host
> > DocumentRoot "/var/www/html"
> >
> > #   SSL Engine Switch:
> > #   Enable/Disable SSL for this virtual host.
> > SSLEngine on
> >
> > #   SSL Cipher Suite:
> > #   List the ciphers that the client is permitted to negotiate.
> > #   See the mod_ssl documentation for a complete list.
> > #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
> >
> > #   Server Certificate:
> > #   Point SSLCertificateFile at a PEM encoded certificate.  If
> > #   the certificate is encrypted, then you will be prompted for a
> > #   pass phrase.  Note that a kill -HUP will prompt again. A test
> > #   certificate can be generated with `make certificate' under
> > #   built time. Keep in mind that if you've both a RSA and a DSA
> > #   certificate you can configure both in parallel (to also allow
> > #   the use of DSA ciphers, etc.)
> > SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
> > #SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt
> >
> > #   Server Private Key:
> > #   If the key is not combined with the certificate, use this
> > #   directive to point at the key file.  Keep in mind that if
> > #   you've both a RSA and a DSA private key you can configure
> > #   both in parallel (to also allow the use of DSA ciphers, etc.)
> > SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key
> > #SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key
> >
> > #   Server Certificate Chain:
> > #   Point SSLCertificateChainFile at a file containing the
> > #   concatenation of PEM encoded CA certificates which form the
> > #   certificate chain for the server certificate. Alternatively
> > #   the referenced file can be the same as SSLCertificateFile
> > #   when the CA certificates are directly appended to the server
> > #   certificate for convinience.
> > #SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt
> >
> > #   Certificate Authority (CA):
> > #   Set the CA certificate verification path where to find CA
> > #   certificates for client authentication or alternatively one
> > #   huge file containing all of them (file must be PEM encoded)
> > #   Note: Inside SSLCACertificatePath you need hash symlinks
> > #         to point to the certificate files. Use the provided
> > #         Makefile to update the hash symlinks after changes.
> > #SSLCACertificatePath /etc/httpd/conf/ssl.crt
> > #SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt
> >
> > #   Certificate Revocation Lists (CRL):
> > #   Set the CA revocation path where to find CA CRLs for client
> > #   authentication or alternatively one huge file containing all
> > #   of them (file must be PEM encoded)
> > #   Note: Inside SSLCARevocationPath you need hash symlinks
> > #         to point to the certificate files. Use the provided
> > #         Makefile to update the hash symlinks after changes.
> > #SSLCARevocationPath /etc/httpd/conf/ssl.crl
> > #SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl
> > #   Client Authentication (Type):
> > #   Client certificate verification type and depth.  Types are
> > #   none, optional, require and optional_no_ca.  Depth is a
> > #   number which specifies how deeply to verify the certificate
> > #   issuer chain before deciding the certificate is not valid.
> > #SSLVerifyClient require
> > #SSLVerifyDepth  10
> >
> > #   Access Control:
> > #   With SSLRequire you can do per-directory access control based
> > #   on arbitrary complex boolean expressions containing server
> > #   variable checks and other lookup directives.  The syntax is a
> > #   mixture between C and Perl.  See the mod_ssl documentation
> > #   for more details.
> > #<Location />
> > #SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
> > #            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
> > #            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
> > #            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
> > #            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
> > #           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
> > #</Location>
> > #   SSL Engine Options:
> > #   Set various options for the SSL engine.
> > #   o FakeBasicAuth:
> > #     Translate the client X.509 into a Basic Authorisation.  This means
> > that
> > #     the standard Auth/DBMAuth methods can be used for access control.
> The
> > #     user name is the `one line' version of the client's X.509
> certificate.
> > #     Note that no password is obtained from the user. Every entry in the
> > user
> > #     file needs this password: `xxj31ZMTZzkVA'.
> > #   o ExportCertData:
> > #     This exports two additional environment variables: SSL_CLIENT_CERT
> and
> > #     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
> > #     server (always existing) and the client (only existing when client
> > #     authentication is used). This can be used to import the certificates
> > #     into CGI scripts.
> > #   o StdEnvVars:
> > #     This exports the standard SSL/TLS related `SSL_*' environment
> > variables.
> > #     Per default this exportation is switched off for performance
> reasons,
> > #     because the extraction step is an expensive operation and is usually
> > #     useless for serving static content. So one usually enables the
> > #     exportation for CGI and SSI requests only.
> > #   o CompatEnvVars:
> > #     This exports obsolete environment variables for backward
> compatibility
> > #     to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use
> > this
> > #     to provide compatibility to existing CGI scripts.
> > #   o StrictRequire:
> > #     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
> > #     under a "Satisfy any" situation, i.e. when it applies access is
> denied
> > #     and no other module can change it.
> > #   o OptRenegotiate:
> > #     This enables optimized SSL connection renegotiation handling when
> SSL
> > #     directives are used in per-directory context.
> > #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
> > <Files ~ "\.(cgi|shtml)$">
> >     SSLOptions +StdEnvVars
> > </Files>
> > <Directory "/var/www/cgi-bin">
> >     SSLOptions +StdEnvVars
> > </Directory>
> >
> > #   Notice: Most problems of broken clients are also related to the HTTP
> > #   keep-alive facility, so you usually additionally want to disable
> > #   keep-alive for those clients, too. Use variable "nokeepalive" for
> this.
> > SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
> >
> > #   Per-Server Logging:
> > #   The home of a custom SSL log file. Use this when you want a
> > #   compact non-error SSL logfile on a virtual host basis.
> > CustomLog /var/log/httpd/ssl_request_log \
> >           "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
> >
> > </VirtualHost>
> >
> > </IfDefine>
> >
> > # My turn ...
> >
> > <Directory /var/www/*/html/>
> > Options Indexes Includes FollowSymLinks
> > Order allow,deny
> > Allow from all
> > </Directory>
> >
> > <Directory /home/*/html/>
> > Options All ExecCGI
> > Order allow,deny
> > Allow from all
> > </Directory>
> >
> > <Directory /var/www/*/cgi-bin/>
> > Options ExecCGI
> > </Directory>
> >
> > NameVirtualHost 194.102.241.1
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/fcc/html
> > ScriptAlias /cgi-bin/ "/var/www/fcc/cgi-bin/"
> > ServerName www.fcc.ro
> > UserDir html
> > ErrorLog logs/fcc.error_log
> > CustomLog logs/fcc.access_log common
> >
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin codrut@fcc.ro
> > DocumentRoot /var/www/codrut/html
> > ScriptAlias /cgi-bin/ "/var/www/codrut/cgi-bin/"
> > ServerName www.codrut.fcc.ro
> > ErrorLog logs/codrut.error_log
> > CustomLog logs/codrut.access_log common
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rogoblen@fcc.ro
> > DocumentRoot /var/www/rogoblen/html
> > ScriptAlias /cgi-bin/ "/var/www/rogoblen/cgi-bin/"
> > ServerName rogoblen.fcc.ro
> > ErrorLog logs/rogoblen.error_log
> > CustomLog logs/rogoblen.access_log common
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/stratus/html
> > ScriptAlias /cgi-bin/ "/var/www/stratus/cgi-bin/"
> > ServerName www.stratus.ro
> > ErrorLog logs/stratus.error_log
> > CustomLog logs/stratus.access_log common
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/trafic/
> > Alias /netsaint/ "/var/www/trafic/netsaint/"
> > ScriptAlias /cgi-bin/netsaint/ "/usr/netsaint/sbin/"
> > ErrorLog logs/trafic.error_log
> > ServerName trafic.fcc.ro
> >
> > <Directory /var/www/trafic>
> > Options All
> > AllowOverride None
> > AuthUserFile /etc/httpd/pas/trafic.pwd
> > AuthGroupFile /dev/null
> > AuthName trafic
> > AuthType Basic
> > Options All
> > <Limit GET POST>
> > require valid-user
> > </Limit>
> > </Directory>
> >
> > <Directory /usr/netsaint/sbin>
> > AllowOverride AuthConfig
> > order allow,deny
> > allow from all
> > Options ExecCGI
> > </Directory>
> >
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/rosf/html
> > ScriptAlias /cgi-bin/ "/var/www/rosf/cgi-bin/"
> > ServerName www.rosf.org
> > ErrorLog logs/rosf.error_log
> > CustomLog logs/rosf.access_log common
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin teddy@fcc.ro
> > DocumentRoot /var/www/teddy/html
> > ScriptAlias /cgi-bin/ "/var/www/teddy/cgi-bin/"
> > ServerName teddy.fcc.ro
> > ErrorLog logs/teddy.error_log
> > CustomLog logs/teddy.access_log common
> > </VirtualHost>
> >
> > <Directory /var/www/teddy/>
> >     Options FollowSymLinks
> >     AllowOverride All
> > </Directory>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/sahin/html
> > ScriptAlias /cgi-bin/ "/var/www/sahin/cgi-bin/"
> > ServerName www.sahin.ro
> > ErrorLog logs/sahin.error_log
> > CustomLog logs/sahin.access_log common
> > </VirtualHost>
> >
> > <VirtualHost 194.102.241.1>
> > ServerAdmin rot@fcc.ro
> > DocumentRoot /var/www/migtour2000/html
> > ScriptAlias /cgi-bin/ "/var/www/migtour2000/cgi-bin/"
> > ServerName www.migtour2000.ro
> > ErrorLog logs/migtour2000.error_log
> > CustomLog logs/migtour2000.access_log common
> > </VirtualHost>
> >
> > Teddy,
> > orasnita@home.ro
> >
> > ----- Original Message -----
> > From: "Joshua Slive" <joshua@slive.ca>
> > To: <users@httpd.apache.org>
> > Sent: Sunday, May 19, 2002 5:12 AM
> > Subject: Re: Where to put <directory>
> >
> > On Sun, 19 May 2002, Octavian Rasnita wrote:
> >
> > > Thank you.
> > > Then why I don't get that configuration even though I use that virtual
> > host?
> > > I can't use the .htaccess files.
> > > What other problem could I have?
> >
> > Where exactly is the .htaccess file?  What exactly does it say?  What
> > exactly does your httpd.conf say?  Are there any symlinks or other weird
> > stuff?
> >
> > Joshua.
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
>
> --
> Ciao ?:-)
> Shirlyn, the WebPrincess
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org

--
Ciao ?:-)
Shirlyn, the WebPrincess



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Mime
View raw message