httpd-cvs mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From bnicho...@apache.org
Subject cvs commit: httpd-2.0/modules/proxy NWGNUproxyhtp NWGNUproxyftp NWGNUproxycon NWGNUproxy NWGNUmakefile
Date Fri, 19 Apr 2002 21:01:16 GMT
bnicholes    02/04/19 14:01:16

  Modified:    modules/proxy NWGNUmakefile
  Added:       modules/proxy NWGNUproxyhtp NWGNUproxyftp NWGNUproxycon
                        NWGNUproxy
  Log:
  Added the NetWare make files to build the proxy modules
  
  Revision  Changes    Path
  1.2       +12 -36    httpd-2.0/modules/proxy/NWGNUmakefile
  
  Index: NWGNUmakefile
  ===================================================================
  RCS file: /home/cvs/httpd-2.0/modules/proxy/NWGNUmakefile,v
  retrieving revision 1.1
  retrieving revision 1.2
  diff -u -r1.1 -r1.2
  --- NWGNUmakefile	1 Mar 2002 22:20:49 -0000	1.1
  +++ NWGNUmakefile	19 Apr 2002 21:01:16 -0000	1.2
  @@ -14,30 +14,22 @@
   
   #
   # build this level's files
  +
   #
   # Make sure all needed macro's are defined
   #
   
  -
   #
   # These directories will be at the beginning of the include list, followed by
   # INCDIRS
   #
   XINCDIRS	+= \
  -			$(AP_WORK)/include \
  -			$(NWOS) \
  -			$(AP_WORK)/modules/http \
  -			$(AP_WORK)/modules/arch/netware \
  -			$(AP_WORK)/srclib/apr/include \
  -			$(AP_WORK)/srclib/apr-util/include \
  -			$(AP_WORK)/srclib/apr \
   			$(EOLIST)
   
   #
   # These flags will come after CFLAGS
   #
   XCFLAGS		+= \
  -			-prefix pre_nw.h \
   			$(EOLIST)
   
   #
  @@ -103,19 +95,19 @@
   # This is used by the link 'name' directive to name the nlm.  If left blank
   # TARGET_nlm (see below) will be used.
   #
  -NLM_NAME		= proxy
  +NLM_NAME		=
   
   #
   # This is used by the link '-desc ' directive. 
   # If left blank, NLM_NAME will be used.
   #
  -NLM_DESCRIPTION	= Proxy Module
  +NLM_DESCRIPTION	=
   
   #
   # This is used by the '-threadname' directive.  If left blank,
   # NLM_NAME Thread will be used.
   #
  -NLM_THREAD_NAME	= Proxy Module
  +NLM_THREAD_NAME	=
   
   #
   # If this is specified, it will override VERSION value in 
  @@ -126,18 +118,18 @@
   #
   # If this is specified, it will override the default of 64K
   #
  -NLM_STACK_SIZE	= 8192
  +NLM_STACK_SIZE	=
   
   
   #
   # If this is specified it will be used by the link '-entry' directive
   #
  -NLM_ENTRY_SYM	= _LibCPrelude
  +NLM_ENTRY_SYM	=
   
   #
   # If this is specified it will be used by the link '-exit' directive
   #
  -NLM_EXIT_SYM	= _LibCPostlude
  +NLM_EXIT_SYM	=
   
   #
   # If this is specified it will be used by the link '-check' directive
  @@ -147,7 +139,7 @@
   #
   # If these are specified it will be used by the link '-flags' directive
   #
  -NLM_FLAGS		=  AUTOUNLOAD, PSEUDOPREEMPTION
  +NLM_FLAGS		=
   
   #
   # If this is specified it will be linked in with the XDCData option in the def 
  @@ -161,6 +153,9 @@
   #
   TARGET_nlm = \
   	$(OBJDIR)/proxy.nlm \
  +	$(OBJDIR)/proxycon.nlm \
  +	$(OBJDIR)/proxyftp.nlm \
  +	$(OBJDIR)/proxyhtp.nlm \
   	$(EOLIST)
   
   #
  @@ -174,12 +169,6 @@
   # Paths must all use the '/' character
   #
   FILES_nlm_objs = \
  -	$(OBJDIR)/mod_proxy.o \
  -	$(OBJDIR)/proxy_connect.o \
  -	$(OBJDIR)/proxy_ftp.o \
  -	$(OBJDIR)/proxy_http.o \
  -	$(OBJDIR)/proxy_util.o \
  -	$(OBJDIR)/libprews.o \
   	$(EOLIST)
   
   #
  @@ -187,7 +176,6 @@
   # These will be added as a library command in the link.opt file.
   #
   FILES_nlm_libs = \
  -   	libcpre.o \
   	$(EOLIST)
   
   #
  @@ -195,8 +183,6 @@
   # These will be added as a module command in the link.opt file.
   #
   FILES_nlm_modules = \
  -	aprlib \
  -	libc \
   	$(EOLIST)
   
   #
  @@ -218,17 +204,12 @@
   # Any additional imports go here
   #
   FILES_nlm_Ximports = \
  -	@$(APR)/aprlib.imp \
  -	@$(NWOS)/httpd.imp \
  -	@libc.imp \
  -	@ws2nlm.imp \
   	$(EOLIST)
    
   #   
   # Any symbols exported to here
   #
   FILES_nlm_exports = \
  -	proxy_module \
   	$(EOLIST)
   	
   #   
  @@ -257,15 +238,10 @@
   # Any specialized rules here
   #
   
  -$(OBJDIR)/%.o: ../arch/netware/%.c $(OBJDIR)\cc.opt
  -	@echo compiling $<
  -	$(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
  -
   #
   # Include the 'tail' makefile that has targets that depend on variables defined
   # in this makefile
   #
   
   include $(AP_WORK)\build\NWGNUtail.inc
  -
  -
  +	
  
  
  
  1.1                  httpd-2.0/modules/proxy/NWGNUproxyhtp
  
  Index: NWGNUproxyhtp
  ===================================================================
  #
  # Make sure all needed macro's are defined
  #
  
  #
  # Get the 'head' of the build environment if necessary.  This includes default
  # targets and paths to tools
  #
  
  ifndef EnvironmentDefined
  include $(AP_WORK)\build\NWGNUhead.inc
  endif
  
  #
  # These directories will be at the beginning of the include list, followed by
  # INCDIRS
  #
  XINCDIRS	+= \
  			$(AP_WORK)/include \
  			$(NWOS) \
  			$(AP_WORK)/modules/http \
  			$(AP_WORK)/modules/arch/netware \
  			$(AP_WORK)/srclib/apr/include \
  			$(AP_WORK)/srclib/apr-util/include \
  			$(AP_WORK)/srclib/apr \
  			$(EOLIST)
  
  #
  # These flags will come after CFLAGS
  #
  XCFLAGS		+= \
  			-prefix pre_nw.h \
  			$(EOLIST)
  
  #
  # These defines will come after DEFINES
  #
  XDEFINES	+= \
  			$(EOLIST)
  
  #
  # These flags will be added to the link.opt file
  #
  XLFLAGS		+= \
  			$(EOLIST)
  
  #
  # These values will be appended to the correct variables based on the value of
  # RELEASE
  #
  ifeq "$(RELEASE)" "debug"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "noopt"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "release"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  			$(EOLIST)
  endif
  
  #
  # These are used by the link target if an NLM is being generated
  # This is used by the link 'name' directive to name the nlm.  If left blank
  # TARGET_nlm (see below) will be used.
  #
  NLM_NAME		= proxyhtp
  
  #
  # This is used by the link '-desc ' directive. 
  # If left blank, NLM_NAME will be used.
  #
  NLM_DESCRIPTION	= Proxy HTTP Module
  
  #
  # This is used by the '-threadname' directive.  If left blank,
  # NLM_NAME Thread will be used.
  #
  NLM_THREAD_NAME	= Proxy HTTP Module
  
  #
  # If this is specified, it will override VERSION value in 
  # $(AP_WORK)\build\NWGNUenvironment.inc
  #
  NLM_VERSION		=
  
  #
  # If this is specified, it will override the default of 64K
  #
  NLM_STACK_SIZE	= 8192
  
  
  #
  # If this is specified it will be used by the link '-entry' directive
  #
  NLM_ENTRY_SYM	= _LibCPrelude
  
  #
  # If this is specified it will be used by the link '-exit' directive
  #
  NLM_EXIT_SYM	= _LibCPostlude
  
  #
  # If this is specified it will be used by the link '-check' directive
  #
  NLM_CHECK_SYM	=
  
  #
  # If these are specified it will be used by the link '-flags' directive
  #
  NLM_FLAGS		=  AUTOUNLOAD, PSEUDOPREEMPTION
  
  #
  # If this is specified it will be linked in with the XDCData option in the def 
  # file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
  # by setting APACHE_UNIPROC in the environment
  #
  XDCDATA         = 
  
  #
  # If there is an NLM target, put it here
  #
  TARGET_nlm = \
  	$(OBJDIR)/proxyhtp.nlm \
  	$(EOLIST)
  
  #
  # If there is an LIB target, put it here
  #
  TARGET_lib = \
  	$(EOLIST)
  
  #
  # These are the OBJ files needed to create the NLM target above.
  # Paths must all use the '/' character
  #
  FILES_nlm_objs = \
  	$(OBJDIR)/proxy_http.o \
  	$(OBJDIR)/proxy_util.o \
  	$(OBJDIR)/libprews.o \
  	$(EOLIST)
  
  #
  # These are the LIB files needed to create the NLM target above.
  # These will be added as a library command in the link.opt file.
  #
  FILES_nlm_libs = \
     	libcpre.o \
  	$(EOLIST)
  
  #
  # These are the modules that the above NLM target depends on to load.
  # These will be added as a module command in the link.opt file.
  #
  FILES_nlm_modules = \
  	aprlib \
  	libc \
  	$(EOLIST)
  
  #
  # If the nlm has a msg file, put it's path here
  #
  FILE_nlm_msg =
   
  #
  # If the nlm has a hlp file put it's path here
  #
  FILE_nlm_hlp =
  
  #
  # If this is specified, it will override $(NWOS)\copyright.txt.
  #
  FILE_nlm_copyright =
  
  #
  # Any additional imports go here
  #
  FILES_nlm_Ximports = \
  	@$(APR)/aprlib.imp \
  	@$(NWOS)/httpd.imp \
  	@libc.imp \
  	@ws2nlm.imp \
  	proxy_hook_scheme_handler \
  	proxy_hook_canon_handler \
  	proxy_run_fixups \
  	ap_proxy_ssl_enable \
  	ap_proxy_ssl_disable \
  	$(EOLIST)
   
  #   
  # Any symbols exported to here
  #
  FILES_nlm_exports = \
  	proxy_http_module \
  	$(EOLIST)
  	
  #   
  # These are the OBJ files needed to create the LIB target above.
  # Paths must all use the '/' character
  #
  FILES_lib_objs = \
  		$(EOLIST)
  
  #
  # implement targets and dependancies (leave this section alone)
  #
  
  libs :: $(OBJDIR) $(TARGET_lib)
  
  nlms :: libs $(TARGET_nlm)
  
  #
  # Updated this target to create necessary directories and copy files to the 
  # correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
  #
  install :: nlms FORCE
  
  #
  # Any specialized rules here
  #
  
  $(OBJDIR)/%.o: ../arch/netware/%.c $(OBJDIR)\cc.opt
  	@echo compiling $<
  	$(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
  
  #
  # Include the 'tail' makefile that has targets that depend on variables defined
  # in this makefile
  #
  
  include $(AP_WORK)\build\NWGNUtail.inc
  
  
  
  
  1.1                  httpd-2.0/modules/proxy/NWGNUproxyftp
  
  Index: NWGNUproxyftp
  ===================================================================
  #
  # Make sure all needed macro's are defined
  #
  
  #
  # Get the 'head' of the build environment if necessary.  This includes default
  # targets and paths to tools
  #
  
  ifndef EnvironmentDefined
  include $(AP_WORK)\build\NWGNUhead.inc
  endif
  
  #
  # These directories will be at the beginning of the include list, followed by
  # INCDIRS
  #
  XINCDIRS	+= \
  			$(AP_WORK)/include \
  			$(NWOS) \
  			$(AP_WORK)/modules/http \
  			$(AP_WORK)/modules/arch/netware \
  			$(AP_WORK)/srclib/apr/include \
  			$(AP_WORK)/srclib/apr-util/include \
  			$(AP_WORK)/srclib/apr \
  			$(EOLIST)
  
  #
  # These flags will come after CFLAGS
  #
  XCFLAGS		+= \
  			-prefix pre_nw.h \
  			$(EOLIST)
  
  #
  # These defines will come after DEFINES
  #
  XDEFINES	+= \
  			$(EOLIST)
  
  #
  # These flags will be added to the link.opt file
  #
  XLFLAGS		+= \
  			$(EOLIST)
  
  #
  # These values will be appended to the correct variables based on the value of
  # RELEASE
  #
  ifeq "$(RELEASE)" "debug"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "noopt"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "release"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  			$(EOLIST)
  endif
  
  #
  # These are used by the link target if an NLM is being generated
  # This is used by the link 'name' directive to name the nlm.  If left blank
  # TARGET_nlm (see below) will be used.
  #
  NLM_NAME		= proxyftp
  
  #
  # This is used by the link '-desc ' directive. 
  # If left blank, NLM_NAME will be used.
  #
  NLM_DESCRIPTION	= Proxy FTP Module
  
  #
  # This is used by the '-threadname' directive.  If left blank,
  # NLM_NAME Thread will be used.
  #
  NLM_THREAD_NAME	= Proxy FTP Module
  
  #
  # If this is specified, it will override VERSION value in 
  # $(AP_WORK)\build\NWGNUenvironment.inc
  #
  NLM_VERSION		=
  
  #
  # If this is specified, it will override the default of 64K
  #
  NLM_STACK_SIZE	= 8192
  
  
  #
  # If this is specified it will be used by the link '-entry' directive
  #
  NLM_ENTRY_SYM	= _LibCPrelude
  
  #
  # If this is specified it will be used by the link '-exit' directive
  #
  NLM_EXIT_SYM	= _LibCPostlude
  
  #
  # If this is specified it will be used by the link '-check' directive
  #
  NLM_CHECK_SYM	=
  
  #
  # If these are specified it will be used by the link '-flags' directive
  #
  NLM_FLAGS		=  AUTOUNLOAD, PSEUDOPREEMPTION
  
  #
  # If this is specified it will be linked in with the XDCData option in the def 
  # file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
  # by setting APACHE_UNIPROC in the environment
  #
  XDCDATA         = 
  
  #
  # If there is an NLM target, put it here
  #
  TARGET_nlm = \
  	$(OBJDIR)/proxyftp.nlm \
  	$(EOLIST)
  
  #
  # If there is an LIB target, put it here
  #
  TARGET_lib = \
  	$(EOLIST)
  
  #
  # These are the OBJ files needed to create the NLM target above.
  # Paths must all use the '/' character
  #
  FILES_nlm_objs = \
  	$(OBJDIR)/proxy_ftp.o \
  	$(OBJDIR)/proxy_util.o \
  	$(OBJDIR)/libprews.o \
  	$(EOLIST)
  
  #
  # These are the LIB files needed to create the NLM target above.
  # These will be added as a library command in the link.opt file.
  #
  FILES_nlm_libs = \
     	libcpre.o \
  	$(EOLIST)
  
  #
  # These are the modules that the above NLM target depends on to load.
  # These will be added as a module command in the link.opt file.
  #
  FILES_nlm_modules = \
  	aprlib \
  	libc \
  	$(EOLIST)
  
  #
  # If the nlm has a msg file, put it's path here
  #
  FILE_nlm_msg =
   
  #
  # If the nlm has a hlp file put it's path here
  #
  FILE_nlm_hlp =
  
  #
  # If this is specified, it will override $(NWOS)\copyright.txt.
  #
  FILE_nlm_copyright =
  
  #
  # Any additional imports go here
  #
  FILES_nlm_Ximports = \
  	@$(APR)/aprlib.imp \
  	@$(NWOS)/httpd.imp \
  	@libc.imp \
  	@ws2nlm.imp \
  	proxy_hook_scheme_handler \
  	proxy_hook_canon_handler \
  	$(EOLIST)
   
  #   
  # Any symbols exported to here
  #
  FILES_nlm_exports = \
  	proxy_ftp_module \
  	$(EOLIST)
  	
  #   
  # These are the OBJ files needed to create the LIB target above.
  # Paths must all use the '/' character
  #
  FILES_lib_objs = \
  		$(EOLIST)
  
  #
  # implement targets and dependancies (leave this section alone)
  #
  
  libs :: $(OBJDIR) $(TARGET_lib)
  
  nlms :: libs $(TARGET_nlm)
  
  #
  # Updated this target to create necessary directories and copy files to the 
  # correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
  #
  install :: nlms FORCE
  
  #
  # Any specialized rules here
  #
  
  $(OBJDIR)/%.o: ../arch/netware/%.c $(OBJDIR)\cc.opt
  	@echo compiling $<
  	$(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
  
  #
  # Include the 'tail' makefile that has targets that depend on variables defined
  # in this makefile
  #
  
  include $(AP_WORK)\build\NWGNUtail.inc
  
  
  
  
  1.1                  httpd-2.0/modules/proxy/NWGNUproxycon
  
  Index: NWGNUproxycon
  ===================================================================
  #
  # Make sure all needed macro's are defined
  #
  
  #
  # Get the 'head' of the build environment if necessary.  This includes default
  # targets and paths to tools
  #
  
  ifndef EnvironmentDefined
  include $(AP_WORK)\build\NWGNUhead.inc
  endif
  
  #
  # These directories will be at the beginning of the include list, followed by
  # INCDIRS
  #
  XINCDIRS	+= \
  			$(AP_WORK)/include \
  			$(NWOS) \
  			$(AP_WORK)/modules/http \
  			$(AP_WORK)/modules/arch/netware \
  			$(AP_WORK)/srclib/apr/include \
  			$(AP_WORK)/srclib/apr-util/include \
  			$(AP_WORK)/srclib/apr \
  			$(EOLIST)
  
  #
  # These flags will come after CFLAGS
  #
  XCFLAGS		+= \
  			-prefix pre_nw.h \
  			$(EOLIST)
  
  #
  # These defines will come after DEFINES
  #
  XDEFINES	+= \
  			$(EOLIST)
  
  #
  # These flags will be added to the link.opt file
  #
  XLFLAGS		+= \
  			$(EOLIST)
  
  #
  # These values will be appended to the correct variables based on the value of
  # RELEASE
  #
  ifeq "$(RELEASE)" "debug"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "noopt"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "release"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  			$(EOLIST)
  endif
  
  #
  # These are used by the link target if an NLM is being generated
  # This is used by the link 'name' directive to name the nlm.  If left blank
  # TARGET_nlm (see below) will be used.
  #
  NLM_NAME		= proxycon
  
  #
  # This is used by the link '-desc ' directive. 
  # If left blank, NLM_NAME will be used.
  #
  NLM_DESCRIPTION	= Proxy Connection Module
  
  #
  # This is used by the '-threadname' directive.  If left blank,
  # NLM_NAME Thread will be used.
  #
  NLM_THREAD_NAME	= Proxy Conn Module
  
  #
  # If this is specified, it will override VERSION value in 
  # $(AP_WORK)\build\NWGNUenvironment.inc
  #
  NLM_VERSION		=
  
  #
  # If this is specified, it will override the default of 64K
  #
  NLM_STACK_SIZE	= 8192
  
  
  #
  # If this is specified it will be used by the link '-entry' directive
  #
  NLM_ENTRY_SYM	= _LibCPrelude
  
  #
  # If this is specified it will be used by the link '-exit' directive
  #
  NLM_EXIT_SYM	= _LibCPostlude
  
  #
  # If this is specified it will be used by the link '-check' directive
  #
  NLM_CHECK_SYM	=
  
  #
  # If these are specified it will be used by the link '-flags' directive
  #
  NLM_FLAGS		=  AUTOUNLOAD, PSEUDOPREEMPTION
  
  #
  # If this is specified it will be linked in with the XDCData option in the def 
  # file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
  # by setting APACHE_UNIPROC in the environment
  #
  XDCDATA         = 
  
  #
  # If there is an NLM target, put it here
  #
  TARGET_nlm = \
  	$(OBJDIR)/proxycon.nlm \
  	$(EOLIST)
  
  #
  # If there is an LIB target, put it here
  #
  TARGET_lib = \
  	$(EOLIST)
  
  #
  # These are the OBJ files needed to create the NLM target above.
  # Paths must all use the '/' character
  #
  FILES_nlm_objs = \
  	$(OBJDIR)/proxy_connect.o \
  	$(OBJDIR)/proxy_util.o \
  	$(EOLIST)
  
  #
  # These are the LIB files needed to create the NLM target above.
  # These will be added as a library command in the link.opt file.
  #
  FILES_nlm_libs = \
     	libcpre.o \
  	$(EOLIST)
  
  #
  # These are the modules that the above NLM target depends on to load.
  # These will be added as a module command in the link.opt file.
  #
  FILES_nlm_modules = \
  	aprlib \
  	libc \
  	$(EOLIST)
  
  #
  # If the nlm has a msg file, put it's path here
  #
  FILE_nlm_msg =
   
  #
  # If the nlm has a hlp file put it's path here
  #
  FILE_nlm_hlp =
  
  #
  # If this is specified, it will override $(NWOS)\copyright.txt.
  #
  FILE_nlm_copyright =
  
  #
  # Any additional imports go here
  #
  FILES_nlm_Ximports = \
  	@$(APR)/aprlib.imp \
  	@$(NWOS)/httpd.imp \
  	@libc.imp \
  	proxy_hook_scheme_handler \
  	proxy_hook_canon_handler \
  	$(EOLIST)
   
  #   
  # Any symbols exported to here
  #
  FILES_nlm_exports = \
  	proxy_connect_module \
  	$(EOLIST)
  	
  #   
  # These are the OBJ files needed to create the LIB target above.
  # Paths must all use the '/' character
  #
  FILES_lib_objs = \
  		$(EOLIST)
  
  #
  # implement targets and dependancies (leave this section alone)
  #
  
  libs :: $(OBJDIR) $(TARGET_lib)
  
  nlms :: libs $(TARGET_nlm)
  
  #
  # Updated this target to create necessary directories and copy files to the 
  # correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
  #
  install :: nlms FORCE
  
  #
  # Any specialized rules here
  #
  
  #
  # Include the 'tail' makefile that has targets that depend on variables defined
  # in this makefile
  #
  
  include $(AP_WORK)\build\NWGNUtail.inc
  
  
  
  
  1.1                  httpd-2.0/modules/proxy/NWGNUproxy
  
  Index: NWGNUproxy
  ===================================================================
  #
  # Make sure all needed macro's are defined
  #
  
  #
  # Get the 'head' of the build environment if necessary.  This includes default
  # targets and paths to tools
  #
  
  ifndef EnvironmentDefined
  include $(AP_WORK)\build\NWGNUhead.inc
  endif
  
  #
  # These directories will be at the beginning of the include list, followed by
  # INCDIRS
  #
  XINCDIRS	+= \
  			$(AP_WORK)/include \
  			$(NWOS) \
  			$(AP_WORK)/modules/http \
  			$(AP_WORK)/modules/arch/netware \
  			$(AP_WORK)/srclib/apr/include \
  			$(AP_WORK)/srclib/apr-util/include \
  			$(AP_WORK)/srclib/apr \
  			$(EOLIST)
  
  #
  # These flags will come after CFLAGS
  #
  XCFLAGS		+= \
  			-prefix pre_nw.h \
  			$(EOLIST)
  
  #
  # These defines will come after DEFINES
  #
  XDEFINES	+= \
  			$(EOLIST)
  
  #
  # These flags will be added to the link.opt file
  #
  XLFLAGS		+= \
  			$(EOLIST)
  
  #
  # These values will be appended to the correct variables based on the value of
  # RELEASE
  #
  ifeq "$(RELEASE)" "debug"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "noopt"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  		   	$(EOLIST)
  endif
  
  ifeq "$(RELEASE)" "release"
  XINCDIRS	+= \
  			$(EOLIST)
  
  XCFLAGS		+= \
  			$(EOLIST)
  
  XDEFINES	+= \
  			$(EOLIST)
  
  XLFLAGS		+= \
  			$(EOLIST)
  endif
  
  #
  # These are used by the link target if an NLM is being generated
  # This is used by the link 'name' directive to name the nlm.  If left blank
  # TARGET_nlm (see below) will be used.
  #
  NLM_NAME		= proxy
  
  #
  # This is used by the link '-desc ' directive. 
  # If left blank, NLM_NAME will be used.
  #
  NLM_DESCRIPTION	= Proxy Module
  
  #
  # This is used by the '-threadname' directive.  If left blank,
  # NLM_NAME Thread will be used.
  #
  NLM_THREAD_NAME	= Proxy Module
  
  #
  # If this is specified, it will override VERSION value in 
  # $(AP_WORK)\build\NWGNUenvironment.inc
  #
  NLM_VERSION		=
  
  #
  # If this is specified, it will override the default of 64K
  #
  NLM_STACK_SIZE	= 8192
  
  
  #
  # If this is specified it will be used by the link '-entry' directive
  #
  NLM_ENTRY_SYM	= _LibCPrelude
  
  #
  # If this is specified it will be used by the link '-exit' directive
  #
  NLM_EXIT_SYM	= _LibCPostlude
  
  #
  # If this is specified it will be used by the link '-check' directive
  #
  NLM_CHECK_SYM	=
  
  #
  # If these are specified it will be used by the link '-flags' directive
  #
  NLM_FLAGS		=  AUTOUNLOAD, PSEUDOPREEMPTION
  
  #
  # If this is specified it will be linked in with the XDCData option in the def 
  # file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
  # by setting APACHE_UNIPROC in the environment
  #
  XDCDATA         = 
  
  #
  # If there is an NLM target, put it here
  #
  TARGET_nlm = \
  	$(OBJDIR)/proxy.nlm \
  	$(EOLIST)
  
  #
  # If there is an LIB target, put it here
  #
  TARGET_lib = \
  	$(EOLIST)
  
  #
  # These are the OBJ files needed to create the NLM target above.
  # Paths must all use the '/' character
  #
  FILES_nlm_objs = \
  	$(OBJDIR)/mod_proxy.o \
  	$(OBJDIR)/proxy_util.o \
  	$(OBJDIR)/libprews.o \
  	$(EOLIST)
  
  #
  # These are the LIB files needed to create the NLM target above.
  # These will be added as a library command in the link.opt file.
  #
  FILES_nlm_libs = \
     	libcpre.o \
  	$(EOLIST)
  
  #
  # These are the modules that the above NLM target depends on to load.
  # These will be added as a module command in the link.opt file.
  #
  FILES_nlm_modules = \
  	aprlib \
  	libc \
  	$(EOLIST)
  
  #
  # If the nlm has a msg file, put it's path here
  #
  FILE_nlm_msg =
   
  #
  # If the nlm has a hlp file put it's path here
  #
  FILE_nlm_hlp =
  
  #
  # If this is specified, it will override $(NWOS)\copyright.txt.
  #
  FILE_nlm_copyright =
  
  #
  # Any additional imports go here
  #
  FILES_nlm_Ximports = \
  	@$(APR)/aprlib.imp \
  	@$(NWOS)/httpd.imp \
  	@libc.imp \
  	@ws2nlm.imp \
  	$(EOLIST)
   
  #   
  # Any symbols exported to here
  #
  FILES_nlm_exports = \
  	proxy_module \
  	$(EOLIST)
  	
  #   
  # These are the OBJ files needed to create the LIB target above.
  # Paths must all use the '/' character
  #
  FILES_lib_objs = \
  		$(EOLIST)
  
  #
  # implement targets and dependancies (leave this section alone)
  #
  
  libs :: $(OBJDIR) $(TARGET_lib)
  
  nlms :: libs $(TARGET_nlm)
  
  #
  # Updated this target to create necessary directories and copy files to the 
  # correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
  #
  install :: nlms FORCE
  
  #
  # Any specialized rules here
  #
  
  $(OBJDIR)/%.o: ../arch/netware/%.c $(OBJDIR)\cc.opt
  	@echo compiling $<
  	$(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
  
  #
  # Include the 'tail' makefile that has targets that depend on variables defined
  # in this makefile
  #
  
  include $(AP_WORK)\build\NWGNUtail.inc
  
  
  
  

Mime
View raw message