hbase-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Yves S. Garret" <yoursurrogate...@gmail.com>
Subject Re: HBase is not running.
Date Tue, 21 May 2013 17:06:51 GMT
On Tue, May 21, 2013 at 10:00 AM, Yves S. Garret <yoursurrogategod@gmail.com
> wrote:

> Ok, it seems to be working now.  I changed my environment variables
> as a result.  However, when I try to get the web GUI to work, it doesn't
> work :) .  That's where I'm stuck right now.
>
>
> On Tue, May 21, 2013 at 9:21 AM, Yves S. Garret <
> yoursurrogategod@gmail.com> wrote:
>
>> Also, I keep hearing that Java 6 is required.  Currently I have Java 7
>> installed.  Is this an issue or do I need to downgrade?
>>
>>
>> On Tue, May 21, 2013 at 9:18 AM, Yves S. Garret <
>> yoursurrogategod@gmail.com> wrote:
>>
>>> Hi Mohammad,
>>>
>>> I was following your tutorial and when I got to the part when you do
>>> $ bin/start-hbase.sh, this is what I get:
>>> http://bin.cakephp.org/view/428090088
>>>
>>> I'll keep looking online for an answer, but was I supposed to do
>>> something
>>> else besides this?
>>>
>>> This is the contents of my bashrc:
>>> http://bin.cakephp.org/view/629885150
>>>
>>> This is what happens when I run "hadoop version":
>>> $ hadoop version
>>> Hadoop 1.0.4
>>> Subversion
>>> https://svn.apache.org/repos/asf/hadoop/common/branches/branch-1.0 -r
>>> 1393290
>>> Compiled by hortonfo on Wed Oct  3 05:13:58 UTC 2012
>>> From source with checksum fe2baea87c4c81a2c505767f3f9b71f4
>>>
>>> No issues, I'm guessing.
>>>
>>> Not sure where I'm tripping up.
>>>
>>>
>>> On Fri, May 3, 2013 at 6:52 AM, Mohammad Tariq <dontariq@gmail.com>wrote:
>>>
>>>> Yes..You can do that. I would suggest you to start fresh and setup a
>>>> single
>>>> node setup first. Once it is working fine, extending it to multiple
>>>> machines is just a matter of copying the config files. I have explained
>>>> the
>>>> procedure here<
>>>> http://cloudfront.blogspot.in/2012/06/how-to-configure-habse-in-pseudo.html#.UYOWrkAW38s
>>>> >.
>>>> Try to follow this and hopefully you'll be able to do it properly. If
>>>> you
>>>> further need any help let us know.
>>>>
>>>> Warm Regards,
>>>> Tariq
>>>> https://mtariq.jux.com/
>>>> cloudfront.blogspot.com
>>>>
>>>>
>>>> On Fri, May 3, 2013 at 12:09 AM, Yves S. Garret
>>>> <yoursurrogategod@gmail.com>wrote:
>>>>
>>>> > Hi Tariq, can those two paths be one in the same?  I'd like to just
>>>> > dump everything into one directory if that's possible.
>>>> >
>>>> >
>>>> > On Wed, May 1, 2013 at 10:15 PM, Mohammad Tariq <dontariq@gmail.com>
>>>> > wrote:
>>>> >
>>>> > > hbase.rootdir the directory HBase writes data to. I you are
>>>> planning to
>>>> > > have a distributed HBase setup then set this property to some a
>>>> directory
>>>> > > in your HDFS, like "hdfs://NN_MACHINE:9000/hbase". Otherwise point
>>>> some
>>>> > dir
>>>> > > on your local FS. And for hbase.zookeper.property.dataDir, create
a
>>>> > > separate dir outside your HBASE_HOME and as the value.
>>>> > >
>>>> > > Warm Regards,
>>>> > > Tariq
>>>> > > https://mtariq.jux.com/
>>>> > > cloudfront.blogspot.com
>>>> > >
>>>> > >
>>>> > > On Thu, May 2, 2013 at 7:40 AM, Yves S. Garret
>>>> > > <yoursurrogategod@gmail.com>wrote:
>>>> > >
>>>> > > > One more little update.
>>>> > > >
>>>> > > > I ran this command in HBASE_HOME [ $ bin/start-hbase.sh ],
>>>> > > > using these configuration settings:
>>>> > > > http://bin.cakephp.org/view/1134614486
>>>> > > >
>>>> > > > After I rand it, I checked
>>>> > > > $HBASE_HOME/logs/hbase-ysg-master-ysg.connect.log and
>>>> > > > this is what I saw:
>>>> > > > http://bin.cakephp.org/view/823736802
>>>> > > >
>>>> > > > I hope that sheds some light for you guys.
>>>> > > >
>>>> > > >
>>>> > > > On Wed, May 1, 2013 at 10:04 PM, Yves S. Garret
>>>> > > > <yoursurrogategod@gmail.com>wrote:
>>>> > > >
>>>> > > > > Hi guys, one more question.
>>>> > > > >
>>>> > > > > I'm looking at this <
>>>> http://hbase.apache.org/book/quickstart.html>
>>>> > > link
>>>> > > > > in section 1.2.1 and where I have to modify
>>>> > > > > conf/hbase-site.xml, for parts hbase.rootdir and
>>>> > > > > hbase.zookeper.property.dataDir, to what should I set
>>>> hbase.rootdir?
>>>> > > > > At the moment, I have hbase.rootdir set to
>>>> > > > > /media/alternative-storage-do-not-touch/zookeeper.  Is
that
>>>> fine?
>>>> > > > > Also, for hbase.zookeper.property.dataDir, I currently
have it
>>>> set to
>>>> > > > > ${HBASE_HOME}/bin/hbase, does that make sense?
>>>> > > > >
>>>> > > > > I realize that some of these questions could be annoying,
but
>>>> I'd
>>>> > > > > like to make sure that I'm on the right track and don't
screw
>>>> > > > > something up, getting a weird run-time error in the future
:) .
>>>> > > > >
>>>> > > > >
>>>> > > > > On Wed, May 1, 2013 at 8:23 PM, Yves S. Garret <
>>>> > > > yoursurrogategod@gmail.com
>>>> > > > > > wrote:
>>>> > > > >
>>>> > > > >> Done.  I'll go through the previously mentioned tutorial
with
>>>> > > > >> this in mind.
>>>> > > > >>
>>>> > > > >> Thank you for your help.
>>>> > > > >>
>>>> > > > >>
>>>> > > > >> On Wed, May 1, 2013 at 4:39 PM, shashwat shriparv
<
>>>> > > > >> dwivedishashwat@gmail.com> wrote:
>>>> > > > >>
>>>> > > > >>> Commment out everything in /etc/host file add
127.0.0.1
>>>> localhost
>>>> > and
>>>> > > > >>> then try.
>>>> > > > >>>
>>>> > > > >>>
>>>> > > > >>> *Thanks & Regards    *
>>>> > > > >>>
>>>> > > > >>> ∞
>>>> > > > >>> Shashwat Shriparv
>>>> > > > >>>
>>>> > > > >>>
>>>> > > > >>>
>>>> > > > >>> On Thu, May 2, 2013 at 1:57 AM, Mohammad Tariq
<
>>>> dontariq@gmail.com
>>>> > >
>>>> > > > >>> wrote:
>>>> > > > >>>
>>>> > > > >>> > Hello Yves,
>>>> > > > >>> >
>>>> > > > >>> >        I think by that JM means that you
should first make
>>>> sure
>>>> > > that
>>>> > > > >>> all
>>>> > > > >>> > you Hbase daemons are running fine. The
webUI is a pretty
>>>> > > convenient
>>>> > > > >>> tool
>>>> > > > >>> > which allows you to monitor everything in
a simpler way. If
>>>> you
>>>> > are
>>>> > > > >>> able to
>>>> > > > >>> > see the webUI properly, it means everything
is in place and
>>>> you
>>>> > can
>>>> > > > >>> move
>>>> > > > >>> > ahead. You can then proceed with your shell
exercises.
>>>> > > > >>> >
>>>> > > > >>> > Yes..It's the same tool JM was referring
to. Do you still
>>>> have
>>>> > any
>>>> > > > >>> > problem?What do your logs say?
>>>> > > > >>> >
>>>> > > > >>> > Warm Regards,
>>>> > > > >>> > Tariq
>>>> > > > >>> > https://mtariq.jux.com/
>>>> > > > >>> > cloudfront.blogspot.com
>>>> > > > >>> >
>>>> > > > >>> >
>>>> > > > >>> > On Thu, May 2, 2013 at 1:47 AM, Yves S.
Garret
>>>> > > > >>> > <yoursurrogategod@gmail.com>wrote:
>>>> > > > >>> >
>>>> > > > >>> > > Ok, I spoke too soon.  I tried going
from Nutch to
>>>> Hive... not
>>>> > > > >>> supported
>>>> > > > >>> > > (but adding support to it sounds like
a fun side-project
>>>> :) ).
>>>> > > >  But,
>>>> > > > >>> I
>>>> > > > >>> > can
>>>> > > > >>> > > go to HBase.
>>>> > > > >>> > >
>>>> > > > >>> > > Jean-Marc, I do have a question for
you.  When you said
>>>> that I
>>>> > > > should
>>>> > > > >>> > > get the UI going before anything else,
what did you mean?
>>>>  I'm
>>>> > > > >>> guessing
>>>> > > > >>> > > that this is the tool in question:
>>>> > > > >>> > > http://hbase.apache.org/book/trouble.tools.html
>>>> > > > >>> > >
>>>> > > > >>> > >
>>>> > > > >>> > > On Tue, Apr 30, 2013 at 7:50 AM, Jean-Marc
Spaggiari <
>>>> > > > >>> > > jean-marc@spaggiari.org> wrote:
>>>> > > > >>> > >
>>>> > > > >>> > > > Hi Yves,
>>>> > > > >>> > > >
>>>> > > > >>> > > > Your host file looks good.
>>>> > > > >>> > > >
>>>> > > > >>> > > > Don't even try the shell until
you get the UI displayed
>>>> > > correctly
>>>> > > > >>> and
>>>> > > > >>> > the
>>>> > > > >>> > > > server logs saying that initialization
is done.
>>>> > > > >>> > > >
>>>> > > > >>> > > > So what do you have on the logs
when you are trying
>>>> with this
>>>> > > new
>>>> > > > >>> host
>>>> > > > >>> > > > file?
>>>> > > > >>> > > >
>>>> > > > >>> > > > JM
>>>> > > > >>> > > >
>>>> > > > >>> > > > 2013/4/28 Asaf Mesika <asaf.mesika@gmail.com>
>>>> > > > >>> > > >
>>>> > > > >>> > > > > Http://Devving.com has a
good post on setting hosts
>>>> file
>>>> > for
>>>> > > > >>> stand
>>>> > > > >>> > > alone
>>>> > > > >>> > > > > hbase
>>>> > > > >>> > > > >
>>>> > > > >>> > > > > On Saturday, April 27, 2013,
Yves S. Garret wrote:
>>>> > > > >>> > > > >
>>>> > > > >>> > > > > > Hi, but I don't understand
what you mean.  Did I
>>>> miss a
>>>> > > step
>>>> > > > >>> > > > > > in the tutorial?
>>>> > > > >>> > > > > >
>>>> > > > >>> > > > > >
>>>> > > > >>> > > > > > On Fri, Apr 26, 2013
at 4:26 PM, Leonid Fedotov <
>>>> > > > >>> > > > > lfedotov@hortonworks.com<javascript:;>
>>>> > > > >>> > > > > > >wrote:
>>>> > > > >>> > > > > >
>>>> > > > >>> > > > > > > Looks like your
zookeeper configuration is
>>>> incorrect in
>>>> > > > >>> HBase.
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > > > > Check it out.
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > > > > Thank you!
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > > > > Sincerely,
>>>> > > > >>> > > > > > > Leonid Fedotov
>>>> > > > >>> > > > > > > Technical Support
Engineer
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > > > > On Apr 26, 2013,
at 9:59 AM, Yves S. Garret wrote:
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > > > > > Hi, thanks
for your reply.
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > > I did [ hostname
] in my linux OS and this is
>>>> what I
>>>> > > have
>>>> > > > >>> for a
>>>> > > > >>> > > > > > > > hostname [
ysg.connect ].
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > > This is how
my hosts file looks like.
>>>> > > > >>> > > > > > > > 127.0.0.1
  localhost localhost.localdomain
>>>> > localhost4
>>>> > > > >>> > > > > > > > localhost4.localdomain4
>>>> > > > >>> > > > > > > > 127.0.0.1
  localhost
>>>> > > > >>> > > > > > > > 192.168.1.6
ysg.connect
>>>> > > > >>> > > > > > > > ::1      
  localhost localhost.localdomain
>>>> > localhost6
>>>> > > > >>> > > > > > > > localhost6.localdomain6
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > > Now, I fired
up the shell and this is the result
>>>> > that I
>>>> > > > got
>>>> > > > >>> > when
>>>> > > > >>> > > I
>>>> > > > >>> > > > > > > > tried to execute
[ create 'test', 'cf' ].  This
>>>> is
>>>> > the
>>>> > > > >>> error
>>>> > > > >>> > > that I
>>>> > > > >>> > > > > > got:
>>>> > > > >>> > > > > > > > http://bin.cakephp.org/view/1016732333
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > > The weird
thing is that after starting the
>>>> shell,
>>>> > > > executing
>>>> > > > >>> > that
>>>> > > > >>> > > > > > > > command, having
that command error out and keep
>>>> going
>>>> > > and
>>>> > > > >>> > > > > > > > then exiting
the command, I checked the logs
>>>> and...
>>>> > > > nothing
>>>> > > > >>> > > > > > > > was displayed.
 It's as if nothing was stored.
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > > On Fri, Apr
26, 2013 at 7:12 AM, Jean-Marc
>>>> Spaggiari
>>>> > <
>>>> > > > >>> > > > > > > > jean-marc@spaggiari.org>
wrote:
>>>> > > > >>> > > > > > > >
>>>> > > > >>> > > > > > > >> Hi Yves,
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> You need
to add an entry with your host name
>>>> and
>>>> > your
>>>> > > > >>> local
>>>> > > > >>> > IP.
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> As an
example, here is mine:
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> 127.0.0.1
      localhost
>>>> > > > >>> > > > > > > >> 192.168.23.2
   buldo
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> My host
name is buldo.
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> JM
>>>> > > > >>> > > > > > > >>
>>>> > > > >>> > > > > > > >> 2013/4/25
Yves S. Garret <
>>>> > yoursurrogategod@gmail.com
>>>> > > >:
>>>> > > > >>> > > > > > > >>> Hi
Jean, this is my /etc/hosts.
>>>> > > > >>> > > > > > > >>>
>>>> > > > >>> > > > > > > >>> 127.0.0.1
  localhost localhost.localdomain
>>>> > > localhost4
>>>> > > > >>> > > > > > > >>> localhost4.localdomain4
>>>> > > > >>> > > > > > > >>> 127.0.0.1
  localhost
>>>> > > > >>> > > > > > > >>> ::1
        localhost localhost.localdomain
>>>> > > localhost6
>>>> > > > >>> > > > > > > >>> localhost6.localdomain6
>>>> > > > >>> > > > > > > >>>
>>>> > > > >>> > > > > > > >>>
>>>> > > > >>> > > > > > > >>> On
Thu, Apr 25, 2013 at 5:22 PM, Jean-Marc
>>>> > Spaggiari
>>>> > > <
>>>> > > > >>> > > > > > > >>> jean-marc@spaggiari.org>
wrote:
>>>> > > > >>> > > > > > > >>>
>>>> > > > >>> > > > > > > >>>>
Hi Yves,
>>>> > > > >>> > > > > > > >>>>
>>>> > > > >>> > > > > > > >>>>
You seems to have some network configuration
>>>> issue
>>>> > > > with
>>>> > > > >>> your
>>>> > > > >>> > > > > > > >> installation.
>>>> > > > >>> > > > > > > >>>>
>>>> > > > >>> > > > > > > >>>>
"java.net.BindException: Cannot assign
>>>> requested
>>>> > > > >>> address"
>>>> > > > >>> > and
>>>> > > > >>> > > > > > > >>>>
"ip72-215-225-9.at.at.cox.net/72.215.225.9:0
>>>> "
>>>> > > > >>> > > > > > > >>>>
>>>> > > > >>> > > > > > > >>>>
How is your host file configured? You need
>>>> to have
>>>> > > > your
>>>> > > > >>> host
>>>> > > > >>> > > > name
>>>> > > > >>> > > > > > > >>>>
pointing to you local IP (and not 127.0.0.1).
>>>> > > > >>> > > > > > > >>>>
>>>> > > > >>> > > > > > > >>>>
2013/4/25 Yves S. Garret <
>>>> > > yoursurrogategod@gmail.com
>>>> > > > >:
>>>> > > > >>> > > > > > > >>>>>
My mistake.  I thought I had all of those
>>>> logs.
>>>> > >  This
>>>> > > > >>> is
>>>> > > > >>> > > what I
>>>> > > > >>> > > > > > > >> currently
>>>> > > > >>> > > > > > > >>>>>
have:
>>>> > > > >>> > > > > > > >>>>>
http://bin.cakephp.org/view/2112130549
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>
I have $JAVA_HOME set to this:
>>>> > > > >>> > > > > > > >>>>>
/usr/java/jdk1.7.0_17
>>>> > > > >>> > > > > > > >>>>>
I have extracted 0.94 and ran
>>>> bin/start-hbase.sh
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>
Thanks for your help!
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>
On Thu, Apr 25, 2013 at 4:42 PM, Jean-Marc
>>>> > > Spaggiari
>>>> > > > <
>>>> > > > >>> > > > > > > >>>>>
jean-marc@spaggiari.org> wrote:
>>>> > > > >>> > > > > > > >>>>>
>>>> > > > >>> > > > > > > >>>>>>
Hi Mohammad,
>>>> > > > >>> > > > > > > >>>>>>
>>>> > > > >>> > > > > > >
>>>> > > > >>> > > > >
>>>> > > > >>> > > >
>>>> > > > >>> > >
>>>> > > > >>> >
>>>> > > > >>>
>>>> > > > >>
>>>> > > > >>
>>>> > > > >
>>>> > > >
>>>> > >
>>>> >
>>>>
>>>
>>>
>>
>
Another update.

1 - Hbase did start when I ran start-hbase.sh, this is what I saw:
     $ start-hbase.sh
     starting master, logging to
/media/alternative-storage-do-not-touch/hbase-0.94.7/logs/hbase-ysg-master-ysg.connect.out

     What strikes me about this is the fact that is that it _seems_ wrong
     since I expected output about Zookeeper... which I did not see, and
leads
     me to believe that it's not configured/integrated in correctly.  Am I
     wrong in my assumption?

2 - The HBase shell started, but I had issues with getting help to work, as
     demonstrated below:

     http://bin.cakephp.org/view/1896781076

3 - The Web GUI does not work and when I try to create a table, I get the
     super-long error message.  It's the same as in the April 25th e-mail.

4 - In order to get HBase and Nutch to better like each other, I found this
     tutorial:
     https://wiki.apache.org/nutch/Nutch2Tutorial

     Thoughts?

I'll keep chewing on this problem and let you know where I'm at.

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message