hawq-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From h...@apache.org
Subject [09/51] [partial] incubator-hawq git commit: HAWQ-849. Remove apache orc codebase from hawq
Date Wed, 22 Jun 2016 10:12:29 GMT
http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gen_gtest_pred_impl.py
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gen_gtest_pred_impl.py b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gen_gtest_pred_impl.py
deleted file mode 100644
index 3e7ab04..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gen_gtest_pred_impl.py
+++ /dev/null
@@ -1,730 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2006, Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-"""gen_gtest_pred_impl.py v0.1
-
-Generates the implementation of Google Test predicate assertions and
-accompanying tests.
-
-Usage:
-
-  gen_gtest_pred_impl.py MAX_ARITY
-
-where MAX_ARITY is a positive integer.
-
-The command generates the implementation of up-to MAX_ARITY-ary
-predicate assertions, and writes it to file gtest_pred_impl.h in the
-directory where the script is.  It also generates the accompanying
-unit test in file gtest_pred_impl_unittest.cc.
-"""
-
-__author__ = 'wan@google.com (Zhanyong Wan)'
-
-import os
-import sys
-import time
-
-# Where this script is.
-SCRIPT_DIR = os.path.dirname(sys.argv[0])
-
-# Where to store the generated header.
-HEADER = os.path.join(SCRIPT_DIR, '../include/gtest/gtest_pred_impl.h')
-
-# Where to store the generated unit test.
-UNIT_TEST = os.path.join(SCRIPT_DIR, '../test/gtest_pred_impl_unittest.cc')
-
-
-def HeaderPreamble(n):
-  """Returns the preamble for the header file.
-
-  Args:
-    n:  the maximum arity of the predicate macros to be generated.
-  """
-
-  # A map that defines the values used in the preamble template.
-  DEFS = {
-    'today' : time.strftime('%m/%d/%Y'),
-    'year' : time.strftime('%Y'),
-    'command' : '%s %s' % (os.path.basename(sys.argv[0]), n),
-    'n' : n
-    }
-
-  return (
-"""// Copyright 2006, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// This file is AUTOMATICALLY GENERATED on %(today)s by command
-// '%(command)s'.  DO NOT EDIT BY HAND!
-//
-// Implements a family of generic predicate assertion macros.
-
-#ifndef GTEST_INCLUDE_GTEST_GTEST_PRED_IMPL_H_
-#define GTEST_INCLUDE_GTEST_GTEST_PRED_IMPL_H_
-
-// Makes sure this header is not included before gtest.h.
-#ifndef GTEST_INCLUDE_GTEST_GTEST_H_
-# error Do not include gtest_pred_impl.h directly.  Include gtest.h instead.
-#endif  // GTEST_INCLUDE_GTEST_GTEST_H_
-
-// This header implements a family of generic predicate assertion
-// macros:
-//
-//   ASSERT_PRED_FORMAT1(pred_format, v1)
-//   ASSERT_PRED_FORMAT2(pred_format, v1, v2)
-//   ...
-//
-// where pred_format is a function or functor that takes n (in the
-// case of ASSERT_PRED_FORMATn) values and their source expression
-// text, and returns a testing::AssertionResult.  See the definition
-// of ASSERT_EQ in gtest.h for an example.
-//
-// If you don't care about formatting, you can use the more
-// restrictive version:
-//
-//   ASSERT_PRED1(pred, v1)
-//   ASSERT_PRED2(pred, v1, v2)
-//   ...
-//
-// where pred is an n-ary function or functor that returns bool,
-// and the values v1, v2, ..., must support the << operator for
-// streaming to std::ostream.
-//
-// We also define the EXPECT_* variations.
-//
-// For now we only support predicates whose arity is at most %(n)s.
-// Please email googletestframework@googlegroups.com if you need
-// support for higher arities.
-
-// GTEST_ASSERT_ is the basic statement to which all of the assertions
-// in this file reduce.  Don't use this in your code.
-
-#define GTEST_ASSERT_(expression, on_failure) \\
-  GTEST_AMBIGUOUS_ELSE_BLOCKER_ \\
-  if (const ::testing::AssertionResult gtest_ar = (expression)) \\
-    ; \\
-  else \\
-    on_failure(gtest_ar.failure_message())
-""" % DEFS)
-
-
-def Arity(n):
-  """Returns the English name of the given arity."""
-
-  if n < 0:
-    return None
-  elif n <= 3:
-    return ['nullary', 'unary', 'binary', 'ternary'][n]
-  else:
-    return '%s-ary' % n
-
-
-def Title(word):
-  """Returns the given word in title case.  The difference between
-  this and string's title() method is that Title('4-ary') is '4-ary'
-  while '4-ary'.title() is '4-Ary'."""
-
-  return word[0].upper() + word[1:]
-
-
-def OneTo(n):
-  """Returns the list [1, 2, 3, ..., n]."""
-
-  return range(1, n + 1)
-
-
-def Iter(n, format, sep=''):
-  """Given a positive integer n, a format string that contains 0 or
-  more '%s' format specs, and optionally a separator string, returns
-  the join of n strings, each formatted with the format string on an
-  iterator ranged from 1 to n.
-
-  Example:
-
-  Iter(3, 'v%s', sep=', ') returns 'v1, v2, v3'.
-  """
-
-  # How many '%s' specs are in format?
-  spec_count = len(format.split('%s')) - 1
-  return sep.join([format % (spec_count * (i,)) for i in OneTo(n)])
-
-
-def ImplementationForArity(n):
-  """Returns the implementation of n-ary predicate assertions."""
-
-  # A map the defines the values used in the implementation template.
-  DEFS = {
-    'n' : str(n),
-    'vs' : Iter(n, 'v%s', sep=', '),
-    'vts' : Iter(n, '#v%s', sep=', '),
-    'arity' : Arity(n),
-    'Arity' : Title(Arity(n))
-    }
-
-  impl = """
-
-// Helper function for implementing {EXPECT|ASSERT}_PRED%(n)s.  Don't use
-// this in your code.
-template <typename Pred""" % DEFS
-
-  impl += Iter(n, """,
-          typename T%s""")
-
-  impl += """>
-AssertionResult AssertPred%(n)sHelper(const char* pred_text""" % DEFS
-
-  impl += Iter(n, """,
-                                  const char* e%s""")
-
-  impl += """,
-                                  Pred pred"""
-
-  impl += Iter(n, """,
-                                  const T%s& v%s""")
-
-  impl += """) {
-  if (pred(%(vs)s)) return AssertionSuccess();
-
-""" % DEFS
-
-  impl += '  return AssertionFailure() << pred_text << "("'
-
-  impl += Iter(n, """
-                            << e%s""", sep=' << ", "')
-
-  impl += ' << ") evaluates to false, where"'
-
-  impl += Iter(n, """
-                            << "\\n" << e%s << " evaluates to " << v%s""")
-
-  impl += """;
-}
-
-// Internal macro for implementing {EXPECT|ASSERT}_PRED_FORMAT%(n)s.
-// Don't use this in your code.
-#define GTEST_PRED_FORMAT%(n)s_(pred_format, %(vs)s, on_failure)\\
-  GTEST_ASSERT_(pred_format(%(vts)s, %(vs)s), \\
-                on_failure)
-
-// Internal macro for implementing {EXPECT|ASSERT}_PRED%(n)s.  Don't use
-// this in your code.
-#define GTEST_PRED%(n)s_(pred, %(vs)s, on_failure)\\
-  GTEST_ASSERT_(::testing::AssertPred%(n)sHelper(#pred""" % DEFS
-
-  impl += Iter(n, """, \\
-                                             #v%s""")
-
-  impl += """, \\
-                                             pred"""
-
-  impl += Iter(n, """, \\
-                                             v%s""")
-
-  impl += """), on_failure)
-
-// %(Arity)s predicate assertion macros.
-#define EXPECT_PRED_FORMAT%(n)s(pred_format, %(vs)s) \\
-  GTEST_PRED_FORMAT%(n)s_(pred_format, %(vs)s, GTEST_NONFATAL_FAILURE_)
-#define EXPECT_PRED%(n)s(pred, %(vs)s) \\
-  GTEST_PRED%(n)s_(pred, %(vs)s, GTEST_NONFATAL_FAILURE_)
-#define ASSERT_PRED_FORMAT%(n)s(pred_format, %(vs)s) \\
-  GTEST_PRED_FORMAT%(n)s_(pred_format, %(vs)s, GTEST_FATAL_FAILURE_)
-#define ASSERT_PRED%(n)s(pred, %(vs)s) \\
-  GTEST_PRED%(n)s_(pred, %(vs)s, GTEST_FATAL_FAILURE_)
-
-""" % DEFS
-
-  return impl
-
-
-def HeaderPostamble():
-  """Returns the postamble for the header file."""
-
-  return """
-
-#endif  // GTEST_INCLUDE_GTEST_GTEST_PRED_IMPL_H_
-"""
-
-
-def GenerateFile(path, content):
-  """Given a file path and a content string, overwrites it with the
-  given content."""
-
-  print 'Updating file %s . . .' % path
-
-  f = file(path, 'w+')
-  print >>f, content,
-  f.close()
-
-  print 'File %s has been updated.' % path
-
-
-def GenerateHeader(n):
-  """Given the maximum arity n, updates the header file that implements
-  the predicate assertions."""
-
-  GenerateFile(HEADER,
-               HeaderPreamble(n)
-               + ''.join([ImplementationForArity(i) for i in OneTo(n)])
-               + HeaderPostamble())
-
-
-def UnitTestPreamble():
-  """Returns the preamble for the unit test file."""
-
-  # A map that defines the values used in the preamble template.
-  DEFS = {
-    'today' : time.strftime('%m/%d/%Y'),
-    'year' : time.strftime('%Y'),
-    'command' : '%s %s' % (os.path.basename(sys.argv[0]), sys.argv[1]),
-    }
-
-  return (
-"""// Copyright 2006, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// This file is AUTOMATICALLY GENERATED on %(today)s by command
-// '%(command)s'.  DO NOT EDIT BY HAND!
-
-// Regression test for gtest_pred_impl.h
-//
-// This file is generated by a script and quite long.  If you intend to
-// learn how Google Test works by reading its unit tests, read
-// gtest_unittest.cc instead.
-//
-// This is intended as a regression test for the Google Test predicate
-// assertions.  We compile it as part of the gtest_unittest target
-// only to keep the implementation tidy and compact, as it is quite
-// involved to set up the stage for testing Google Test using Google
-// Test itself.
-//
-// Currently, gtest_unittest takes ~11 seconds to run in the testing
-// daemon.  In the future, if it grows too large and needs much more
-// time to finish, we should consider separating this file into a
-// stand-alone regression test.
-
-#include <iostream>
-
-#include "gtest/gtest.h"
-#include "gtest/gtest-spi.h"
-
-// A user-defined data type.
-struct Bool {
-  explicit Bool(int val) : value(val != 0) {}
-
-  bool operator>(int n) const { return value > Bool(n).value; }
-
-  Bool operator+(const Bool& rhs) const { return Bool(value + rhs.value); }
-
-  bool operator==(const Bool& rhs) const { return value == rhs.value; }
-
-  bool value;
-};
-
-// Enables Bool to be used in assertions.
-std::ostream& operator<<(std::ostream& os, const Bool& x) {
-  return os << (x.value ? "true" : "false");
-}
-
-""" % DEFS)
-
-
-def TestsForArity(n):
-  """Returns the tests for n-ary predicate assertions."""
-
-  # A map that defines the values used in the template for the tests.
-  DEFS = {
-    'n' : n,
-    'es' : Iter(n, 'e%s', sep=', '),
-    'vs' : Iter(n, 'v%s', sep=', '),
-    'vts' : Iter(n, '#v%s', sep=', '),
-    'tvs' : Iter(n, 'T%s v%s', sep=', '),
-    'int_vs' : Iter(n, 'int v%s', sep=', '),
-    'Bool_vs' : Iter(n, 'Bool v%s', sep=', '),
-    'types' : Iter(n, 'typename T%s', sep=', '),
-    'v_sum' : Iter(n, 'v%s', sep=' + '),
-    'arity' : Arity(n),
-    'Arity' : Title(Arity(n)),
-    }
-
-  tests = (
-"""// Sample functions/functors for testing %(arity)s predicate assertions.
-
-// A %(arity)s predicate function.
-template <%(types)s>
-bool PredFunction%(n)s(%(tvs)s) {
-  return %(v_sum)s > 0;
-}
-
-// The following two functions are needed to circumvent a bug in
-// gcc 2.95.3, which sometimes has problem with the above template
-// function.
-bool PredFunction%(n)sInt(%(int_vs)s) {
-  return %(v_sum)s > 0;
-}
-bool PredFunction%(n)sBool(%(Bool_vs)s) {
-  return %(v_sum)s > 0;
-}
-""" % DEFS)
-
-  tests += """
-// A %(arity)s predicate functor.
-struct PredFunctor%(n)s {
-  template <%(types)s>
-  bool operator()(""" % DEFS
-
-  tests += Iter(n, 'const T%s& v%s', sep=""",
-                  """)
-
-  tests += """) {
-    return %(v_sum)s > 0;
-  }
-};
-""" % DEFS
-
-  tests += """
-// A %(arity)s predicate-formatter function.
-template <%(types)s>
-testing::AssertionResult PredFormatFunction%(n)s(""" % DEFS
-
-  tests += Iter(n, 'const char* e%s', sep=""",
-                                             """)
-
-  tests += Iter(n, """,
-                                             const T%s& v%s""")
-
-  tests += """) {
-  if (PredFunction%(n)s(%(vs)s))
-    return testing::AssertionSuccess();
-
-  return testing::AssertionFailure()
-      << """ % DEFS
-
-  tests += Iter(n, 'e%s', sep=' << " + " << ')
-
-  tests += """
-      << " is expected to be positive, but evaluates to "
-      << %(v_sum)s << ".";
-}
-""" % DEFS
-
-  tests += """
-// A %(arity)s predicate-formatter functor.
-struct PredFormatFunctor%(n)s {
-  template <%(types)s>
-  testing::AssertionResult operator()(""" % DEFS
-
-  tests += Iter(n, 'const char* e%s', sep=""",
-                                      """)
-
-  tests += Iter(n, """,
-                                      const T%s& v%s""")
-
-  tests += """) const {
-    return PredFormatFunction%(n)s(%(es)s, %(vs)s);
-  }
-};
-""" % DEFS
-
-  tests += """
-// Tests for {EXPECT|ASSERT}_PRED_FORMAT%(n)s.
-
-class Predicate%(n)sTest : public testing::Test {
- protected:
-  virtual void SetUp() {
-    expected_to_finish_ = true;
-    finished_ = false;""" % DEFS
-
-  tests += """
-    """ + Iter(n, 'n%s_ = ') + """0;
-  }
-"""
-
-  tests += """
-  virtual void TearDown() {
-    // Verifies that each of the predicate's arguments was evaluated
-    // exactly once."""
-
-  tests += ''.join(["""
-    EXPECT_EQ(1, n%s_) <<
-        "The predicate assertion didn't evaluate argument %s "
-        "exactly once.";""" % (i, i + 1) for i in OneTo(n)])
-
-  tests += """
-
-    // Verifies that the control flow in the test function is expected.
-    if (expected_to_finish_ && !finished_) {
-      FAIL() << "The predicate assertion unexpactedly aborted the test.";
-    } else if (!expected_to_finish_ && finished_) {
-      FAIL() << "The failed predicate assertion didn't abort the test "
-                "as expected.";
-    }
-  }
-
-  // true iff the test function is expected to run to finish.
-  static bool expected_to_finish_;
-
-  // true iff the test function did run to finish.
-  static bool finished_;
-""" % DEFS
-
-  tests += Iter(n, """
-  static int n%s_;""")
-
-  tests += """
-};
-
-bool Predicate%(n)sTest::expected_to_finish_;
-bool Predicate%(n)sTest::finished_;
-""" % DEFS
-
-  tests += Iter(n, """int Predicate%%(n)sTest::n%s_;
-""") % DEFS
-
-  tests += """
-typedef Predicate%(n)sTest EXPECT_PRED_FORMAT%(n)sTest;
-typedef Predicate%(n)sTest ASSERT_PRED_FORMAT%(n)sTest;
-typedef Predicate%(n)sTest EXPECT_PRED%(n)sTest;
-typedef Predicate%(n)sTest ASSERT_PRED%(n)sTest;
-""" % DEFS
-
-  def GenTest(use_format, use_assert, expect_failure,
-              use_functor, use_user_type):
-    """Returns the test for a predicate assertion macro.
-
-    Args:
-      use_format:     true iff the assertion is a *_PRED_FORMAT*.
-      use_assert:     true iff the assertion is a ASSERT_*.
-      expect_failure: true iff the assertion is expected to fail.
-      use_functor:    true iff the first argument of the assertion is
-                      a functor (as opposed to a function)
-      use_user_type:  true iff the predicate functor/function takes
-                      argument(s) of a user-defined type.
-
-    Example:
-
-      GenTest(1, 0, 0, 1, 0) returns a test that tests the behavior
-      of a successful EXPECT_PRED_FORMATn() that takes a functor
-      whose arguments have built-in types."""
-
-    if use_assert:
-      assrt = 'ASSERT'  # 'assert' is reserved, so we cannot use
-                        # that identifier here.
-    else:
-      assrt = 'EXPECT'
-
-    assertion = assrt + '_PRED'
-
-    if use_format:
-      pred_format = 'PredFormat'
-      assertion += '_FORMAT'
-    else:
-      pred_format = 'Pred'
-
-    assertion += '%(n)s' % DEFS
-
-    if use_functor:
-      pred_format_type = 'functor'
-      pred_format += 'Functor%(n)s()'
-    else:
-      pred_format_type = 'function'
-      pred_format += 'Function%(n)s'
-      if not use_format:
-        if use_user_type:
-          pred_format += 'Bool'
-        else:
-          pred_format += 'Int'
-
-    test_name = pred_format_type.title()
-
-    if use_user_type:
-      arg_type = 'user-defined type (Bool)'
-      test_name += 'OnUserType'
-      if expect_failure:
-        arg = 'Bool(n%s_++)'
-      else:
-        arg = 'Bool(++n%s_)'
-    else:
-      arg_type = 'built-in type (int)'
-      test_name += 'OnBuiltInType'
-      if expect_failure:
-        arg = 'n%s_++'
-      else:
-        arg = '++n%s_'
-
-    if expect_failure:
-      successful_or_failed = 'failed'
-      expected_or_not = 'expected.'
-      test_name +=  'Failure'
-    else:
-      successful_or_failed = 'successful'
-      expected_or_not = 'UNEXPECTED!'
-      test_name +=  'Success'
-
-    # A map that defines the values used in the test template.
-    defs = DEFS.copy()
-    defs.update({
-      'assert' : assrt,
-      'assertion' : assertion,
-      'test_name' : test_name,
-      'pf_type' : pred_format_type,
-      'pf' : pred_format,
-      'arg_type' : arg_type,
-      'arg' : arg,
-      'successful' : successful_or_failed,
-      'expected' : expected_or_not,
-      })
-
-    test = """
-// Tests a %(successful)s %(assertion)s where the
-// predicate-formatter is a %(pf_type)s on a %(arg_type)s.
-TEST_F(%(assertion)sTest, %(test_name)s) {""" % defs
-
-    indent = (len(assertion) + 3)*' '
-    extra_indent = ''
-
-    if expect_failure:
-      extra_indent = '  '
-      if use_assert:
-        test += """
-  expected_to_finish_ = false;
-  EXPECT_FATAL_FAILURE({  // NOLINT"""
-      else:
-        test += """
-  EXPECT_NONFATAL_FAILURE({  // NOLINT"""
-
-    test += '\n' + extra_indent + """  %(assertion)s(%(pf)s""" % defs
-
-    test = test % defs
-    test += Iter(n, ',\n' + indent + extra_indent + '%(arg)s' % defs)
-    test += ');\n' + extra_indent + '  finished_ = true;\n'
-
-    if expect_failure:
-      test += '  }, "");\n'
-
-    test += '}\n'
-    return test
-
-  # Generates tests for all 2**6 = 64 combinations.
-  tests += ''.join([GenTest(use_format, use_assert, expect_failure,
-                            use_functor, use_user_type)
-                    for use_format in [0, 1]
-                    for use_assert in [0, 1]
-                    for expect_failure in [0, 1]
-                    for use_functor in [0, 1]
-                    for use_user_type in [0, 1]
-                    ])
-
-  return tests
-
-
-def UnitTestPostamble():
-  """Returns the postamble for the tests."""
-
-  return ''
-
-
-def GenerateUnitTest(n):
-  """Returns the tests for up-to n-ary predicate assertions."""
-
-  GenerateFile(UNIT_TEST,
-               UnitTestPreamble()
-               + ''.join([TestsForArity(i) for i in OneTo(n)])
-               + UnitTestPostamble())
-
-
-def _Main():
-  """The entry point of the script.  Generates the header file and its
-  unit test."""
-
-  if len(sys.argv) != 2:
-    print __doc__
-    print 'Author: ' + __author__
-    sys.exit(1)
-
-  n = int(sys.argv[1])
-  GenerateHeader(n)
-  GenerateUnitTest(n)
-
-
-if __name__ == '__main__':
-  _Main()

http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gtest-config.in
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gtest-config.in b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gtest-config.in
deleted file mode 100644
index 780f843..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/gtest-config.in
+++ /dev/null
@@ -1,274 +0,0 @@
-#!/bin/sh
-
-# These variables are automatically filled in by the configure script.
-name="@PACKAGE_TARNAME@"
-version="@PACKAGE_VERSION@"
-
-show_usage()
-{
-  echo "Usage: gtest-config [OPTIONS...]"
-}
-
-show_help()
-{
-  show_usage
-  cat <<\EOF
-
-The `gtest-config' script provides access to the necessary compile and linking
-flags to connect with Google C++ Testing Framework, both in a build prior to
-installation, and on the system proper after installation. The installation
-overrides may be issued in combination with any other queries, but will only
-affect installation queries if called on a built but not installed gtest. The
-installation queries may not be issued with any other types of queries, and
-only one installation query may be made at a time. The version queries and
-compiler flag queries may be combined as desired but not mixed. Different
-version queries are always combined with logical "and" semantics, and only the
-last of any particular query is used while all previous ones ignored. All
-versions must be specified as a sequence of numbers separated by periods.
-Compiler flag queries output the union of the sets of flags when combined.
-
- Examples:
-  gtest-config --min-version=1.0 || echo "Insufficient Google Test version."
-
-  g++ $(gtest-config --cppflags --cxxflags) -o foo.o -c foo.cpp
-  g++ $(gtest-config --ldflags --libs) -o foo foo.o
-
-  # When using a built but not installed Google Test:
-  g++ $(../../my_gtest_build/scripts/gtest-config ...) ...
-
-  # When using an installed Google Test, but with installation overrides:
-  export GTEST_PREFIX="/opt"
-  g++ $(gtest-config --libdir="/opt/lib64" ...) ...
-
- Help:
-  --usage                    brief usage information
-  --help                     display this help message
-
- Installation Overrides:
-  --prefix=<dir>             overrides the installation prefix
-  --exec-prefix=<dir>        overrides the executable installation prefix
-  --libdir=<dir>             overrides the library installation prefix
-  --includedir=<dir>         overrides the header file installation prefix
-
- Installation Queries:
-  --prefix                   installation prefix
-  --exec-prefix              executable installation prefix
-  --libdir                   library installation directory
-  --includedir               header file installation directory
-  --version                  the version of the Google Test installation
-
- Version Queries:
-  --min-version=VERSION      return 0 if the version is at least VERSION
-  --exact-version=VERSION    return 0 if the version is exactly VERSION
-  --max-version=VERSION      return 0 if the version is at most VERSION
-
- Compilation Flag Queries:
-  --cppflags                 compile flags specific to the C-like preprocessors
-  --cxxflags                 compile flags appropriate for C++ programs
-  --ldflags                  linker flags
-  --libs                     libraries for linking
-
-EOF
-}
-
-# This function bounds our version with a min and a max. It uses some clever
-# POSIX-compliant variable expansion to portably do all the work in the shell
-# and avoid any dependency on a particular "sed" or "awk" implementation.
-# Notable is that it will only ever compare the first 3 components of versions.
-# Further components will be cleanly stripped off. All versions must be
-# unadorned, so "v1.0" will *not* work. The minimum version must be in $1, and
-# the max in $2. TODO(chandlerc@google.com): If this ever breaks, we should
-# investigate expanding this via autom4te from AS_VERSION_COMPARE rather than
-# continuing to maintain our own shell version.
-check_versions()
-{
-  major_version=${version%%.*}
-  minor_version="0"
-  point_version="0"
-  if test "${version#*.}" != "${version}"; then
-    minor_version=${version#*.}
-    minor_version=${minor_version%%.*}
-  fi
-  if test "${version#*.*.}" != "${version}"; then
-    point_version=${version#*.*.}
-    point_version=${point_version%%.*}
-  fi
-
-  min_version="$1"
-  min_major_version=${min_version%%.*}
-  min_minor_version="0"
-  min_point_version="0"
-  if test "${min_version#*.}" != "${min_version}"; then
-    min_minor_version=${min_version#*.}
-    min_minor_version=${min_minor_version%%.*}
-  fi
-  if test "${min_version#*.*.}" != "${min_version}"; then
-    min_point_version=${min_version#*.*.}
-    min_point_version=${min_point_version%%.*}
-  fi
-
-  max_version="$2"
-  max_major_version=${max_version%%.*}
-  max_minor_version="0"
-  max_point_version="0"
-  if test "${max_version#*.}" != "${max_version}"; then
-    max_minor_version=${max_version#*.}
-    max_minor_version=${max_minor_version%%.*}
-  fi
-  if test "${max_version#*.*.}" != "${max_version}"; then
-    max_point_version=${max_version#*.*.}
-    max_point_version=${max_point_version%%.*}
-  fi
-
-  test $(($major_version)) -lt $(($min_major_version)) && exit 1
-  if test $(($major_version)) -eq $(($min_major_version)); then
-    test $(($minor_version)) -lt $(($min_minor_version)) && exit 1
-    if test $(($minor_version)) -eq $(($min_minor_version)); then
-      test $(($point_version)) -lt $(($min_point_version)) && exit 1
-    fi
-  fi
-
-  test $(($major_version)) -gt $(($max_major_version)) && exit 1
-  if test $(($major_version)) -eq $(($max_major_version)); then
-    test $(($minor_version)) -gt $(($max_minor_version)) && exit 1
-    if test $(($minor_version)) -eq $(($max_minor_version)); then
-      test $(($point_version)) -gt $(($max_point_version)) && exit 1
-    fi
-  fi
-
-  exit 0
-}
-
-# Show the usage line when no arguments are specified.
-if test $# -eq 0; then
-  show_usage
-  exit 1
-fi
-
-while test $# -gt 0; do
-  case $1 in
-    --usage)          show_usage;         exit 0;;
-    --help)           show_help;          exit 0;;
-
-    # Installation overrides
-    --prefix=*)       GTEST_PREFIX=${1#--prefix=};;
-    --exec-prefix=*)  GTEST_EXEC_PREFIX=${1#--exec-prefix=};;
-    --libdir=*)       GTEST_LIBDIR=${1#--libdir=};;
-    --includedir=*)   GTEST_INCLUDEDIR=${1#--includedir=};;
-
-    # Installation queries
-    --prefix|--exec-prefix|--libdir|--includedir|--version)
-      if test -n "${do_query}"; then
-        show_usage
-        exit 1
-      fi
-      do_query=${1#--}
-      ;;
-
-    # Version checking
-    --min-version=*)
-      do_check_versions=yes
-      min_version=${1#--min-version=}
-      ;;
-    --max-version=*)
-      do_check_versions=yes
-      max_version=${1#--max-version=}
-      ;;
-    --exact-version=*)
-      do_check_versions=yes
-      exact_version=${1#--exact-version=}
-      ;;
-
-    # Compiler flag output
-    --cppflags)       echo_cppflags=yes;;
-    --cxxflags)       echo_cxxflags=yes;;
-    --ldflags)        echo_ldflags=yes;;
-    --libs)           echo_libs=yes;;
-
-    # Everything else is an error
-    *)                show_usage;         exit 1;;
-  esac
-  shift
-done
-
-# These have defaults filled in by the configure script but can also be
-# overridden by environment variables or command line parameters.
-prefix="${GTEST_PREFIX:-@prefix@}"
-exec_prefix="${GTEST_EXEC_PREFIX:-@exec_prefix@}"
-libdir="${GTEST_LIBDIR:-@libdir@}"
-includedir="${GTEST_INCLUDEDIR:-@includedir@}"
-
-# We try and detect if our binary is not located at its installed location. If
-# it's not, we provide variables pointing to the source and build tree rather
-# than to the install tree. This allows building against a just-built gtest
-# rather than an installed gtest.
-bindir="@bindir@"
-this_relative_bindir=`dirname $0`
-this_bindir=`cd ${this_relative_bindir}; pwd -P`
-if test "${this_bindir}" = "${this_bindir%${bindir}}"; then
-  # The path to the script doesn't end in the bindir sequence from Autoconf,
-  # assume that we are in a build tree.
-  build_dir=`dirname ${this_bindir}`
-  src_dir=`cd ${this_bindir}; cd @top_srcdir@; pwd -P`
-
-  # TODO(chandlerc@google.com): This is a dangerous dependency on libtool, we
-  # should work to remove it, and/or remove libtool altogether, replacing it
-  # with direct references to the library and a link path.
-  gtest_libs="${build_dir}/lib/libgtest.la @PTHREAD_CFLAGS@ @PTHREAD_LIBS@"
-  gtest_ldflags=""
-
-  # We provide hooks to include from either the source or build dir, where the
-  # build dir is always preferred. This will potentially allow us to write
-  # build rules for generated headers and have them automatically be preferred
-  # over provided versions.
-  gtest_cppflags="-I${build_dir}/include -I${src_dir}/include"
-  gtest_cxxflags="@PTHREAD_CFLAGS@"
-else
-  # We're using an installed gtest, although it may be staged under some
-  # prefix. Assume (as our own libraries do) that we can resolve the prefix,
-  # and are present in the dynamic link paths.
-  gtest_ldflags="-L${libdir}"
-  gtest_libs="-l${name} @PTHREAD_CFLAGS@ @PTHREAD_LIBS@"
-  gtest_cppflags="-I${includedir}"
-  gtest_cxxflags="@PTHREAD_CFLAGS@"
-fi
-
-# Do an installation query if requested.
-if test -n "$do_query"; then
-  case $do_query in
-    prefix)           echo $prefix;       exit 0;;
-    exec-prefix)      echo $exec_prefix;  exit 0;;
-    libdir)           echo $libdir;       exit 0;;
-    includedir)       echo $includedir;   exit 0;;
-    version)          echo $version;      exit 0;;
-    *)                show_usage;         exit 1;;
-  esac
-fi
-
-# Do a version check if requested.
-if test "$do_check_versions" = "yes"; then
-  # Make sure we didn't receive a bad combination of parameters.
-  test "$echo_cppflags" = "yes" && show_usage && exit 1
-  test "$echo_cxxflags" = "yes" && show_usage && exit 1
-  test "$echo_ldflags" = "yes"  && show_usage && exit 1
-  test "$echo_libs" = "yes"     && show_usage && exit 1
-
-  if test "$exact_version" != ""; then
-    check_versions $exact_version $exact_version
-    # unreachable
-  else
-    check_versions ${min_version:-0.0.0} ${max_version:-9999.9999.9999}
-    # unreachable
-  fi
-fi
-
-# Do the output in the correct order so that these can be used in-line of
-# a compiler invocation.
-output=""
-test "$echo_cppflags" = "yes" && output="$output $gtest_cppflags"
-test "$echo_cxxflags" = "yes" && output="$output $gtest_cxxflags"
-test "$echo_ldflags" = "yes"  && output="$output $gtest_ldflags"
-test "$echo_libs" = "yes"     && output="$output $gtest_libs"
-echo $output
-
-exit 0

http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/pump.py
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/pump.py b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/pump.py
deleted file mode 100644
index 5efb653..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/pump.py
+++ /dev/null
@@ -1,855 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2008, Google Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-"""pump v0.2.0 - Pretty Useful for Meta Programming.
-
-A tool for preprocessor meta programming.  Useful for generating
-repetitive boilerplate code.  Especially useful for writing C++
-classes, functions, macros, and templates that need to work with
-various number of arguments.
-
-USAGE:
-       pump.py SOURCE_FILE
-
-EXAMPLES:
-       pump.py foo.cc.pump
-         Converts foo.cc.pump to foo.cc.
-
-GRAMMAR:
-       CODE ::= ATOMIC_CODE*
-       ATOMIC_CODE ::= $var ID = EXPRESSION
-           | $var ID = [[ CODE ]]
-           | $range ID EXPRESSION..EXPRESSION
-           | $for ID SEPARATOR [[ CODE ]]
-           | $($)
-           | $ID
-           | $(EXPRESSION)
-           | $if EXPRESSION [[ CODE ]] ELSE_BRANCH
-           | [[ CODE ]]
-           | RAW_CODE
-       SEPARATOR ::= RAW_CODE | EMPTY
-       ELSE_BRANCH ::= $else [[ CODE ]]
-           | $elif EXPRESSION [[ CODE ]] ELSE_BRANCH
-           | EMPTY
-       EXPRESSION has Python syntax.
-"""
-
-__author__ = 'wan@google.com (Zhanyong Wan)'
-
-import os
-import re
-import sys
-
-
-TOKEN_TABLE = [
-    (re.compile(r'\$var\s+'), '$var'),
-    (re.compile(r'\$elif\s+'), '$elif'),
-    (re.compile(r'\$else\s+'), '$else'),
-    (re.compile(r'\$for\s+'), '$for'),
-    (re.compile(r'\$if\s+'), '$if'),
-    (re.compile(r'\$range\s+'), '$range'),
-    (re.compile(r'\$[_A-Za-z]\w*'), '$id'),
-    (re.compile(r'\$\(\$\)'), '$($)'),
-    (re.compile(r'\$'), '$'),
-    (re.compile(r'\[\[\n?'), '[['),
-    (re.compile(r'\]\]\n?'), ']]'),
-    ]
-
-
-class Cursor:
-  """Represents a position (line and column) in a text file."""
-
-  def __init__(self, line=-1, column=-1):
-    self.line = line
-    self.column = column
-
-  def __eq__(self, rhs):
-    return self.line == rhs.line and self.column == rhs.column
-
-  def __ne__(self, rhs):
-    return not self == rhs
-
-  def __lt__(self, rhs):
-    return self.line < rhs.line or (
-        self.line == rhs.line and self.column < rhs.column)
-
-  def __le__(self, rhs):
-    return self < rhs or self == rhs
-
-  def __gt__(self, rhs):
-    return rhs < self
-
-  def __ge__(self, rhs):
-    return rhs <= self
-
-  def __str__(self):
-    if self == Eof():
-      return 'EOF'
-    else:
-      return '%s(%s)' % (self.line + 1, self.column)
-
-  def __add__(self, offset):
-    return Cursor(self.line, self.column + offset)
-
-  def __sub__(self, offset):
-    return Cursor(self.line, self.column - offset)
-
-  def Clone(self):
-    """Returns a copy of self."""
-
-    return Cursor(self.line, self.column)
-
-
-# Special cursor to indicate the end-of-file.
-def Eof():
-  """Returns the special cursor to denote the end-of-file."""
-  return Cursor(-1, -1)
-
-
-class Token:
-  """Represents a token in a Pump source file."""
-
-  def __init__(self, start=None, end=None, value=None, token_type=None):
-    if start is None:
-      self.start = Eof()
-    else:
-      self.start = start
-    if end is None:
-      self.end = Eof()
-    else:
-      self.end = end
-    self.value = value
-    self.token_type = token_type
-
-  def __str__(self):
-    return 'Token @%s: \'%s\' type=%s' % (
-        self.start, self.value, self.token_type)
-
-  def Clone(self):
-    """Returns a copy of self."""
-
-    return Token(self.start.Clone(), self.end.Clone(), self.value,
-                 self.token_type)
-
-
-def StartsWith(lines, pos, string):
-  """Returns True iff the given position in lines starts with 'string'."""
-
-  return lines[pos.line][pos.column:].startswith(string)
-
-
-def FindFirstInLine(line, token_table):
-  best_match_start = -1
-  for (regex, token_type) in token_table:
-    m = regex.search(line)
-    if m:
-      # We found regex in lines
-      if best_match_start < 0 or m.start() < best_match_start:
-        best_match_start = m.start()
-        best_match_length = m.end() - m.start()
-        best_match_token_type = token_type
-
-  if best_match_start < 0:
-    return None
-
-  return (best_match_start, best_match_length, best_match_token_type)
-
-
-def FindFirst(lines, token_table, cursor):
-  """Finds the first occurrence of any string in strings in lines."""
-
-  start = cursor.Clone()
-  cur_line_number = cursor.line
-  for line in lines[start.line:]:
-    if cur_line_number == start.line:
-      line = line[start.column:]
-    m = FindFirstInLine(line, token_table)
-    if m:
-      # We found a regex in line.
-      (start_column, length, token_type) = m
-      if cur_line_number == start.line:
-        start_column += start.column
-      found_start = Cursor(cur_line_number, start_column)
-      found_end = found_start + length
-      return MakeToken(lines, found_start, found_end, token_type)
-    cur_line_number += 1
-  # We failed to find str in lines
-  return None
-
-
-def SubString(lines, start, end):
-  """Returns a substring in lines."""
-
-  if end == Eof():
-    end = Cursor(len(lines) - 1, len(lines[-1]))
-
-  if start >= end:
-    return ''
-
-  if start.line == end.line:
-    return lines[start.line][start.column:end.column]
-
-  result_lines = ([lines[start.line][start.column:]] +
-                  lines[start.line + 1:end.line] +
-                  [lines[end.line][:end.column]])
-  return ''.join(result_lines)
-
-
-def StripMetaComments(str):
-  """Strip meta comments from each line in the given string."""
-
-  # First, completely remove lines containing nothing but a meta
-  # comment, including the trailing \n.
-  str = re.sub(r'^\s*\$\$.*\n', '', str)
-
-  # Then, remove meta comments from contentful lines.
-  return re.sub(r'\s*\$\$.*', '', str)
-
-
-def MakeToken(lines, start, end, token_type):
-  """Creates a new instance of Token."""
-
-  return Token(start, end, SubString(lines, start, end), token_type)
-
-
-def ParseToken(lines, pos, regex, token_type):
-  line = lines[pos.line][pos.column:]
-  m = regex.search(line)
-  if m and not m.start():
-    return MakeToken(lines, pos, pos + m.end(), token_type)
-  else:
-    print 'ERROR: %s expected at %s.' % (token_type, pos)
-    sys.exit(1)
-
-
-ID_REGEX = re.compile(r'[_A-Za-z]\w*')
-EQ_REGEX = re.compile(r'=')
-REST_OF_LINE_REGEX = re.compile(r'.*?(?=$|\$\$)')
-OPTIONAL_WHITE_SPACES_REGEX = re.compile(r'\s*')
-WHITE_SPACE_REGEX = re.compile(r'\s')
-DOT_DOT_REGEX = re.compile(r'\.\.')
-
-
-def Skip(lines, pos, regex):
-  line = lines[pos.line][pos.column:]
-  m = re.search(regex, line)
-  if m and not m.start():
-    return pos + m.end()
-  else:
-    return pos
-
-
-def SkipUntil(lines, pos, regex, token_type):
-  line = lines[pos.line][pos.column:]
-  m = re.search(regex, line)
-  if m:
-    return pos + m.start()
-  else:
-    print ('ERROR: %s expected on line %s after column %s.' %
-           (token_type, pos.line + 1, pos.column))
-    sys.exit(1)
-
-
-def ParseExpTokenInParens(lines, pos):
-  def ParseInParens(pos):
-    pos = Skip(lines, pos, OPTIONAL_WHITE_SPACES_REGEX)
-    pos = Skip(lines, pos, r'\(')
-    pos = Parse(pos)
-    pos = Skip(lines, pos, r'\)')
-    return pos
-
-  def Parse(pos):
-    pos = SkipUntil(lines, pos, r'\(|\)', ')')
-    if SubString(lines, pos, pos + 1) == '(':
-      pos = Parse(pos + 1)
-      pos = Skip(lines, pos, r'\)')
-      return Parse(pos)
-    else:
-      return pos
-
-  start = pos.Clone()
-  pos = ParseInParens(pos)
-  return MakeToken(lines, start, pos, 'exp')
-
-
-def RStripNewLineFromToken(token):
-  if token.value.endswith('\n'):
-    return Token(token.start, token.end, token.value[:-1], token.token_type)
-  else:
-    return token
-
-
-def TokenizeLines(lines, pos):
-  while True:
-    found = FindFirst(lines, TOKEN_TABLE, pos)
-    if not found:
-      yield MakeToken(lines, pos, Eof(), 'code')
-      return
-
-    if found.start == pos:
-      prev_token = None
-      prev_token_rstripped = None
-    else:
-      prev_token = MakeToken(lines, pos, found.start, 'code')
-      prev_token_rstripped = RStripNewLineFromToken(prev_token)
-
-    if found.token_type == '$var':
-      if prev_token_rstripped:
-        yield prev_token_rstripped
-      yield found
-      id_token = ParseToken(lines, found.end, ID_REGEX, 'id')
-      yield id_token
-      pos = Skip(lines, id_token.end, OPTIONAL_WHITE_SPACES_REGEX)
-
-      eq_token = ParseToken(lines, pos, EQ_REGEX, '=')
-      yield eq_token
-      pos = Skip(lines, eq_token.end, r'\s*')
-
-      if SubString(lines, pos, pos + 2) != '[[':
-        exp_token = ParseToken(lines, pos, REST_OF_LINE_REGEX, 'exp')
-        yield exp_token
-        pos = Cursor(exp_token.end.line + 1, 0)
-    elif found.token_type == '$for':
-      if prev_token_rstripped:
-        yield prev_token_rstripped
-      yield found
-      id_token = ParseToken(lines, found.end, ID_REGEX, 'id')
-      yield id_token
-      pos = Skip(lines, id_token.end, WHITE_SPACE_REGEX)
-    elif found.token_type == '$range':
-      if prev_token_rstripped:
-        yield prev_token_rstripped
-      yield found
-      id_token = ParseToken(lines, found.end, ID_REGEX, 'id')
-      yield id_token
-      pos = Skip(lines, id_token.end, OPTIONAL_WHITE_SPACES_REGEX)
-
-      dots_pos = SkipUntil(lines, pos, DOT_DOT_REGEX, '..')
-      yield MakeToken(lines, pos, dots_pos, 'exp')
-      yield MakeToken(lines, dots_pos, dots_pos + 2, '..')
-      pos = dots_pos + 2
-      new_pos = Cursor(pos.line + 1, 0)
-      yield MakeToken(lines, pos, new_pos, 'exp')
-      pos = new_pos
-    elif found.token_type == '$':
-      if prev_token:
-        yield prev_token
-      yield found
-      exp_token = ParseExpTokenInParens(lines, found.end)
-      yield exp_token
-      pos = exp_token.end
-    elif (found.token_type == ']]' or found.token_type == '$if' or
-          found.token_type == '$elif' or found.token_type == '$else'):
-      if prev_token_rstripped:
-        yield prev_token_rstripped
-      yield found
-      pos = found.end
-    else:
-      if prev_token:
-        yield prev_token
-      yield found
-      pos = found.end
-
-
-def Tokenize(s):
-  """A generator that yields the tokens in the given string."""
-  if s != '':
-    lines = s.splitlines(True)
-    for token in TokenizeLines(lines, Cursor(0, 0)):
-      yield token
-
-
-class CodeNode:
-  def __init__(self, atomic_code_list=None):
-    self.atomic_code = atomic_code_list
-
-
-class VarNode:
-  def __init__(self, identifier=None, atomic_code=None):
-    self.identifier = identifier
-    self.atomic_code = atomic_code
-
-
-class RangeNode:
-  def __init__(self, identifier=None, exp1=None, exp2=None):
-    self.identifier = identifier
-    self.exp1 = exp1
-    self.exp2 = exp2
-
-
-class ForNode:
-  def __init__(self, identifier=None, sep=None, code=None):
-    self.identifier = identifier
-    self.sep = sep
-    self.code = code
-
-
-class ElseNode:
-  def __init__(self, else_branch=None):
-    self.else_branch = else_branch
-
-
-class IfNode:
-  def __init__(self, exp=None, then_branch=None, else_branch=None):
-    self.exp = exp
-    self.then_branch = then_branch
-    self.else_branch = else_branch
-
-
-class RawCodeNode:
-  def __init__(self, token=None):
-    self.raw_code = token
-
-
-class LiteralDollarNode:
-  def __init__(self, token):
-    self.token = token
-
-
-class ExpNode:
-  def __init__(self, token, python_exp):
-    self.token = token
-    self.python_exp = python_exp
-
-
-def PopFront(a_list):
-  head = a_list[0]
-  a_list[:1] = []
-  return head
-
-
-def PushFront(a_list, elem):
-  a_list[:0] = [elem]
-
-
-def PopToken(a_list, token_type=None):
-  token = PopFront(a_list)
-  if token_type is not None and token.token_type != token_type:
-    print 'ERROR: %s expected at %s' % (token_type, token.start)
-    print 'ERROR: %s found instead' % (token,)
-    sys.exit(1)
-
-  return token
-
-
-def PeekToken(a_list):
-  if not a_list:
-    return None
-
-  return a_list[0]
-
-
-def ParseExpNode(token):
-  python_exp = re.sub(r'([_A-Za-z]\w*)', r'self.GetValue("\1")', token.value)
-  return ExpNode(token, python_exp)
-
-
-def ParseElseNode(tokens):
-  def Pop(token_type=None):
-    return PopToken(tokens, token_type)
-
-  next = PeekToken(tokens)
-  if not next:
-    return None
-  if next.token_type == '$else':
-    Pop('$else')
-    Pop('[[')
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    return code_node
-  elif next.token_type == '$elif':
-    Pop('$elif')
-    exp = Pop('code')
-    Pop('[[')
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    inner_else_node = ParseElseNode(tokens)
-    return CodeNode([IfNode(ParseExpNode(exp), code_node, inner_else_node)])
-  elif not next.value.strip():
-    Pop('code')
-    return ParseElseNode(tokens)
-  else:
-    return None
-
-
-def ParseAtomicCodeNode(tokens):
-  def Pop(token_type=None):
-    return PopToken(tokens, token_type)
-
-  head = PopFront(tokens)
-  t = head.token_type
-  if t == 'code':
-    return RawCodeNode(head)
-  elif t == '$var':
-    id_token = Pop('id')
-    Pop('=')
-    next = PeekToken(tokens)
-    if next.token_type == 'exp':
-      exp_token = Pop()
-      return VarNode(id_token, ParseExpNode(exp_token))
-    Pop('[[')
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    return VarNode(id_token, code_node)
-  elif t == '$for':
-    id_token = Pop('id')
-    next_token = PeekToken(tokens)
-    if next_token.token_type == 'code':
-      sep_token = next_token
-      Pop('code')
-    else:
-      sep_token = None
-    Pop('[[')
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    return ForNode(id_token, sep_token, code_node)
-  elif t == '$if':
-    exp_token = Pop('code')
-    Pop('[[')
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    else_node = ParseElseNode(tokens)
-    return IfNode(ParseExpNode(exp_token), code_node, else_node)
-  elif t == '$range':
-    id_token = Pop('id')
-    exp1_token = Pop('exp')
-    Pop('..')
-    exp2_token = Pop('exp')
-    return RangeNode(id_token, ParseExpNode(exp1_token),
-                     ParseExpNode(exp2_token))
-  elif t == '$id':
-    return ParseExpNode(Token(head.start + 1, head.end, head.value[1:], 'id'))
-  elif t == '$($)':
-    return LiteralDollarNode(head)
-  elif t == '$':
-    exp_token = Pop('exp')
-    return ParseExpNode(exp_token)
-  elif t == '[[':
-    code_node = ParseCodeNode(tokens)
-    Pop(']]')
-    return code_node
-  else:
-    PushFront(tokens, head)
-    return None
-
-
-def ParseCodeNode(tokens):
-  atomic_code_list = []
-  while True:
-    if not tokens:
-      break
-    atomic_code_node = ParseAtomicCodeNode(tokens)
-    if atomic_code_node:
-      atomic_code_list.append(atomic_code_node)
-    else:
-      break
-  return CodeNode(atomic_code_list)
-
-
-def ParseToAST(pump_src_text):
-  """Convert the given Pump source text into an AST."""
-  tokens = list(Tokenize(pump_src_text))
-  code_node = ParseCodeNode(tokens)
-  return code_node
-
-
-class Env:
-  def __init__(self):
-    self.variables = []
-    self.ranges = []
-
-  def Clone(self):
-    clone = Env()
-    clone.variables = self.variables[:]
-    clone.ranges = self.ranges[:]
-    return clone
-
-  def PushVariable(self, var, value):
-    # If value looks like an int, store it as an int.
-    try:
-      int_value = int(value)
-      if ('%s' % int_value) == value:
-        value = int_value
-    except Exception:
-      pass
-    self.variables[:0] = [(var, value)]
-
-  def PopVariable(self):
-    self.variables[:1] = []
-
-  def PushRange(self, var, lower, upper):
-    self.ranges[:0] = [(var, lower, upper)]
-
-  def PopRange(self):
-    self.ranges[:1] = []
-
-  def GetValue(self, identifier):
-    for (var, value) in self.variables:
-      if identifier == var:
-        return value
-
-    print 'ERROR: meta variable %s is undefined.' % (identifier,)
-    sys.exit(1)
-
-  def EvalExp(self, exp):
-    try:
-      result = eval(exp.python_exp)
-    except Exception, e:
-      print 'ERROR: caught exception %s: %s' % (e.__class__.__name__, e)
-      print ('ERROR: failed to evaluate meta expression %s at %s' %
-             (exp.python_exp, exp.token.start))
-      sys.exit(1)
-    return result
-
-  def GetRange(self, identifier):
-    for (var, lower, upper) in self.ranges:
-      if identifier == var:
-        return (lower, upper)
-
-    print 'ERROR: range %s is undefined.' % (identifier,)
-    sys.exit(1)
-
-
-class Output:
-  def __init__(self):
-    self.string = ''
-
-  def GetLastLine(self):
-    index = self.string.rfind('\n')
-    if index < 0:
-      return ''
-
-    return self.string[index + 1:]
-
-  def Append(self, s):
-    self.string += s
-
-
-def RunAtomicCode(env, node, output):
-  if isinstance(node, VarNode):
-    identifier = node.identifier.value.strip()
-    result = Output()
-    RunAtomicCode(env.Clone(), node.atomic_code, result)
-    value = result.string
-    env.PushVariable(identifier, value)
-  elif isinstance(node, RangeNode):
-    identifier = node.identifier.value.strip()
-    lower = int(env.EvalExp(node.exp1))
-    upper = int(env.EvalExp(node.exp2))
-    env.PushRange(identifier, lower, upper)
-  elif isinstance(node, ForNode):
-    identifier = node.identifier.value.strip()
-    if node.sep is None:
-      sep = ''
-    else:
-      sep = node.sep.value
-    (lower, upper) = env.GetRange(identifier)
-    for i in range(lower, upper + 1):
-      new_env = env.Clone()
-      new_env.PushVariable(identifier, i)
-      RunCode(new_env, node.code, output)
-      if i != upper:
-        output.Append(sep)
-  elif isinstance(node, RawCodeNode):
-    output.Append(node.raw_code.value)
-  elif isinstance(node, IfNode):
-    cond = env.EvalExp(node.exp)
-    if cond:
-      RunCode(env.Clone(), node.then_branch, output)
-    elif node.else_branch is not None:
-      RunCode(env.Clone(), node.else_branch, output)
-  elif isinstance(node, ExpNode):
-    value = env.EvalExp(node)
-    output.Append('%s' % (value,))
-  elif isinstance(node, LiteralDollarNode):
-    output.Append('$')
-  elif isinstance(node, CodeNode):
-    RunCode(env.Clone(), node, output)
-  else:
-    print 'BAD'
-    print node
-    sys.exit(1)
-
-
-def RunCode(env, code_node, output):
-  for atomic_code in code_node.atomic_code:
-    RunAtomicCode(env, atomic_code, output)
-
-
-def IsSingleLineComment(cur_line):
-  return '//' in cur_line
-
-
-def IsInPreprocessorDirective(prev_lines, cur_line):
-  if cur_line.lstrip().startswith('#'):
-    return True
-  return prev_lines and prev_lines[-1].endswith('\\')
-
-
-def WrapComment(line, output):
-  loc = line.find('//')
-  before_comment = line[:loc].rstrip()
-  if before_comment == '':
-    indent = loc
-  else:
-    output.append(before_comment)
-    indent = len(before_comment) - len(before_comment.lstrip())
-  prefix = indent*' ' + '// '
-  max_len = 80 - len(prefix)
-  comment = line[loc + 2:].strip()
-  segs = [seg for seg in re.split(r'(\w+\W*)', comment) if seg != '']
-  cur_line = ''
-  for seg in segs:
-    if len((cur_line + seg).rstrip()) < max_len:
-      cur_line += seg
-    else:
-      if cur_line.strip() != '':
-        output.append(prefix + cur_line.rstrip())
-      cur_line = seg.lstrip()
-  if cur_line.strip() != '':
-    output.append(prefix + cur_line.strip())
-
-
-def WrapCode(line, line_concat, output):
-  indent = len(line) - len(line.lstrip())
-  prefix = indent*' '  # Prefix of the current line
-  max_len = 80 - indent - len(line_concat)  # Maximum length of the current line
-  new_prefix = prefix + 4*' '  # Prefix of a continuation line
-  new_max_len = max_len - 4  # Maximum length of a continuation line
-  # Prefers to wrap a line after a ',' or ';'.
-  segs = [seg for seg in re.split(r'([^,;]+[,;]?)', line.strip()) if seg != '']
-  cur_line = ''  # The current line without leading spaces.
-  for seg in segs:
-    # If the line is still too long, wrap at a space.
-    while cur_line == '' and len(seg.strip()) > max_len:
-      seg = seg.lstrip()
-      split_at = seg.rfind(' ', 0, max_len)
-      output.append(prefix + seg[:split_at].strip() + line_concat)
-      seg = seg[split_at + 1:]
-      prefix = new_prefix
-      max_len = new_max_len
-
-    if len((cur_line + seg).rstrip()) < max_len:
-      cur_line = (cur_line + seg).lstrip()
-    else:
-      output.append(prefix + cur_line.rstrip() + line_concat)
-      prefix = new_prefix
-      max_len = new_max_len
-      cur_line = seg.lstrip()
-  if cur_line.strip() != '':
-    output.append(prefix + cur_line.strip())
-
-
-def WrapPreprocessorDirective(line, output):
-  WrapCode(line, ' \\', output)
-
-
-def WrapPlainCode(line, output):
-  WrapCode(line, '', output)
-
-
-def IsMultiLineIWYUPragma(line):
-  return re.search(r'/\* IWYU pragma: ', line)
-
-
-def IsHeaderGuardIncludeOrOneLineIWYUPragma(line):
-  return (re.match(r'^#(ifndef|define|endif\s*//)\s*[\w_]+\s*$', line) or
-          re.match(r'^#include\s', line) or
-          # Don't break IWYU pragmas, either; that causes iwyu.py problems.
-          re.search(r'// IWYU pragma: ', line))
-
-
-def WrapLongLine(line, output):
-  line = line.rstrip()
-  if len(line) <= 80:
-    output.append(line)
-  elif IsSingleLineComment(line):
-    if IsHeaderGuardIncludeOrOneLineIWYUPragma(line):
-      # The style guide made an exception to allow long header guard lines,
-      # includes and IWYU pragmas.
-      output.append(line)
-    else:
-      WrapComment(line, output)
-  elif IsInPreprocessorDirective(output, line):
-    if IsHeaderGuardIncludeOrOneLineIWYUPragma(line):
-      # The style guide made an exception to allow long header guard lines,
-      # includes and IWYU pragmas.
-      output.append(line)
-    else:
-      WrapPreprocessorDirective(line, output)
-  elif IsMultiLineIWYUPragma(line):
-    output.append(line)
-  else:
-    WrapPlainCode(line, output)
-
-
-def BeautifyCode(string):
-  lines = string.splitlines()
-  output = []
-  for line in lines:
-    WrapLongLine(line, output)
-  output2 = [line.rstrip() for line in output]
-  return '\n'.join(output2) + '\n'
-
-
-def ConvertFromPumpSource(src_text):
-  """Return the text generated from the given Pump source text."""
-  ast = ParseToAST(StripMetaComments(src_text))
-  output = Output()
-  RunCode(Env(), ast, output)
-  return BeautifyCode(output.string)
-
-
-def main(argv):
-  if len(argv) == 1:
-    print __doc__
-    sys.exit(1)
-
-  file_path = argv[-1]
-  output_str = ConvertFromPumpSource(file(file_path, 'r').read())
-  if file_path.endswith('.pump'):
-    output_file_path = file_path[:-5]
-  else:
-    output_file_path = '-'
-  if output_file_path == '-':
-    print output_str,
-  else:
-    output_file = file(output_file_path, 'w')
-    output_file.write('// This file was GENERATED by command:\n')
-    output_file.write('//     %s %s\n' %
-                      (os.path.basename(__file__), os.path.basename(file_path)))
-    output_file.write('// DO NOT EDIT BY HAND!!!\n\n')
-    output_file.write(output_str)
-    output_file.close()
-
-
-if __name__ == '__main__':
-  main(sys.argv)

http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/test/Makefile
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/test/Makefile b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/test/Makefile
deleted file mode 100644
index cdff584..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/scripts/test/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-# A Makefile for fusing Google Test and building a sample test against it.
-#
-# SYNOPSIS:
-#
-#   make [all]  - makes everything.
-#   make TARGET - makes the given target.
-#   make check  - makes everything and runs the built sample test.
-#   make clean  - removes all files generated by make.
-
-# Points to the root of fused Google Test, relative to where this file is.
-FUSED_GTEST_DIR = output
-
-# Paths to the fused gtest files.
-FUSED_GTEST_H = $(FUSED_GTEST_DIR)/gtest/gtest.h
-FUSED_GTEST_ALL_CC = $(FUSED_GTEST_DIR)/gtest/gtest-all.cc
-
-# Where to find the sample test.
-SAMPLE_DIR = ../../samples
-
-# Where to find gtest_main.cc.
-GTEST_MAIN_CC = ../../src/gtest_main.cc
-
-# Flags passed to the preprocessor.
-# We have no idea here whether pthreads is available in the system, so
-# disable its use.
-CPPFLAGS += -I$(FUSED_GTEST_DIR) -DGTEST_HAS_PTHREAD=0
-
-# Flags passed to the C++ compiler.
-CXXFLAGS += -g
-
-all : sample1_unittest
-
-check : all
-	./sample1_unittest
-
-clean :
-	rm -rf $(FUSED_GTEST_DIR) sample1_unittest *.o
-
-$(FUSED_GTEST_H) :
-	../fuse_gtest_files.py $(FUSED_GTEST_DIR)
-
-$(FUSED_GTEST_ALL_CC) :
-	../fuse_gtest_files.py $(FUSED_GTEST_DIR)
-
-gtest-all.o : $(FUSED_GTEST_H) $(FUSED_GTEST_ALL_CC)
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(FUSED_GTEST_DIR)/gtest/gtest-all.cc
-
-gtest_main.o : $(FUSED_GTEST_H) $(GTEST_MAIN_CC)
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(GTEST_MAIN_CC)
-
-sample1.o : $(SAMPLE_DIR)/sample1.cc $(SAMPLE_DIR)/sample1.h
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(SAMPLE_DIR)/sample1.cc
-
-sample1_unittest.o : $(SAMPLE_DIR)/sample1_unittest.cc \
-                     $(SAMPLE_DIR)/sample1.h $(FUSED_GTEST_H)
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c $(SAMPLE_DIR)/sample1_unittest.cc
-
-sample1_unittest : sample1.o sample1_unittest.o gtest-all.o gtest_main.o
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $^ -o $@

http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/src/gtest-all.cc
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/src/gtest-all.cc b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/src/gtest-all.cc
deleted file mode 100644
index 0a9cee5..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/src/gtest-all.cc
+++ /dev/null
@@ -1,48 +0,0 @@
-// Copyright 2008, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// Author: mheule@google.com (Markus Heule)
-//
-// Google C++ Testing Framework (Google Test)
-//
-// Sometimes it's desirable to build Google Test by compiling a single file.
-// This file serves this purpose.
-
-// This line ensures that gtest.h can be compiled on its own, even
-// when it's fused.
-#include "gtest/gtest.h"
-
-// The following lines pull in the real gtest *.cc files.
-#include "src/gtest.cc"
-#include "src/gtest-death-test.cc"
-#include "src/gtest-filepath.cc"
-#include "src/gtest-port.cc"
-#include "src/gtest-printers.cc"
-#include "src/gtest-test-part.cc"
-#include "src/gtest-typed-test.cc"


Mime
View raw message