hawq-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From cjcjame...@apache.org
Subject [12/80] [abbrv] [partial] incubator-hawq git commit: HAWQ-849. Remove apache orc codebase from hawq
Date Wed, 29 Jun 2016 01:23:05 GMT
http://git-wip-us.apache.org/repos/asf/incubator-hawq/blob/64dce1a8/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/m4/libtool.m4
----------------------------------------------------------------------
diff --git a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/m4/libtool.m4 b/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/m4/libtool.m4
deleted file mode 100644
index 828104c..0000000
--- a/depends/thirdparty/orc/c++/libs/gmock-1.7.0/gtest/m4/libtool.m4
+++ /dev/null
@@ -1,8001 +0,0 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 57 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-		   [m4_fatal([Libtool version $1 or higher is required],
-		             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\	*)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
-_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
-dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-	[m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-	[tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-	   m4_quote(lt_decl_varnames),
-	m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-					   [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-	dnl If the libtool generation code has been placed in $CONFIG_LT,
-	dnl instead of duplicating it all over again into config.status,
-	dnl then we will have config.status run $CONFIG_LT later, so it
-	dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-lt_cl_silent=false
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2011 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_REPLACE_SHELLFNS
-
-   mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],			[_LT_LANG(C)],
-  [C++],		[_LT_LANG(CXX)],
-  [Go],			[_LT_LANG(GO)],
-  [Java],		[_LT_LANG(GCJ)],
-  [Fortran 77],		[_LT_LANG(F77)],
-  [Fortran],		[_LT_LANG(FC)],
-  [Windows Resource],	[_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-m4_ifndef([AC_PROG_GO], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-m4_defun([AC_PROG_GO],
-[AC_LANG_PUSH(Go)dnl
-AC_ARG_VAR([GOC],     [Go compiler command])dnl
-AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
-_AC_ARG_VAR_LDFLAGS()dnl
-AC_CHECK_TOOL(GOC, gccgo)
-if test -z "$GOC"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
-  fi
-fi
-if test -z "$GOC"; then
-  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
-fi
-])#m4_defun
-])#m4_ifndef
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([AC_PROG_GO],
-  [LT_LANG(GO)],
-  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	# If there is a non-empty error log, and "single_module"
-	# appears in it, assume the flag caused a linker warning
-        if test -s conftest.err && $GREP single_module conftest.err; then
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	# Otherwise, if the output was created with a 0 exit code from
-	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi])
-
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-	[lt_cv_ld_exported_symbols_list=yes],
-	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
-    ])
-
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -s conftest.err && $GREP force_load conftest.err; then
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES([TAG])
-# ---------------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
-                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
-  aix_libpath=$lt_cv_aix_libpath
-else
-  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
-  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
-  lt_aix_libpath_sed='[
-      /Import File Strings/,/^$/ {
-	  /^0/ {
-	      s/^0  *\([^ ]*\) *$/\1/
-	      p
-	  }
-      }]'
-  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  # Check for a 64-bit object if we didn't find anything.
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-  fi],[])
-  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
-  fi
-  ])
-  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
-
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
-
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[  --with-sysroot[=DIR] Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted.  We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
-   if test "$GCC" = yes; then
-     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-   fi
-   ;; #(
- /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
-   ;; #(
- no|'')
-   ;; #(
- *)
-   AC_MSG_RESULT([${with_sysroot}])
-   AC_MSG_ERROR([The sysroot must be an absolute path.])
-   ;;
-esac
-
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*)
-        case $host in
-        i?86-*-solaris*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        sparc*-*-solaris*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-        esac
-        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
-        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
-        fi
-        ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
-  [lt_cv_ar_at_file=no
-   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-     [echo conftest.$ac_objext > conftest.lst
-      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
-      AC_TRY_EVAL([lt_ar_try])
-      if test "$ac_status" -eq 0; then
-	# Ensure the archiver fails upon bogus file names.
-	rm -f conftest.$ac_objext libconftest.a
-	AC_TRY_EVAL([lt_ar_try])
-	if test "$ac_status" -ne 0; then
-          lt_cv_ar_at_file=@
-        fi
-      fi
-      rm -f conftest.* libconftest.a
-     ])
-  ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
-  archiver_list_spec=
-else
-  archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
-  [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  os2*)
-    # The test takes a long time on OS/2.
-    lt_cv_sys_max_cmd_len=8192
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-	  lt_cv_dlopen_self_static, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-	 [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-	 [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-	 [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-	[Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-	[], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$cc_basename in
-  yes,*)
-    # gcc
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    dynamic_linker='Win32 ld.exe'
-    ;;
-
-  *,cl*)
-    # Native MSVC
-    libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
-
-    case $build_os in
-    mingw*)
-      sys_lib_search_path_spec=
-      lt_save_ifs=$IFS
-      IFS=';'
-      for lt_path in $LIB
-      do
-        IFS=$lt_save_ifs
-        # Let DOS variable expansion print the short 8.3 style file name.
-        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-      done
-      IFS=$lt_save_ifs
-      # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
-      ;;
-    cygwin*)
-      # Convert to unix form, then to dos form, then back to unix form
-      # but this time dos style (no spaces!) so that the unix form looks
-      # like /cygdrive/c/PROGRA~1:/cygdr...
-      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      ;;
-    *)
-      sys_lib_search_path_spec="$LIB"
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      # FIXME: find the short name or the path components, as spaces are
-      # common. (e.g. "Program Files" -> "PROGRA~1")
-      ;;
-    esac
-
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-    dynamic_linker='Win32 link.exe'
-    ;;
-
-  *)
-    # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    dynamic_linker='Win32 ld.exe'
-    ;;
-  esac
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[23]].*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2.*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-haiku*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
-  postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux # correct to gnu/linux during the next big refactor
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_r

<TRUNCATED>


Mime
View raw message