harmony-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Geir Magnusson Jr." <g...@pobox.com>
Subject Re: svn commit: r477149 - in /harmony/enhanced/drlvm/trunk/build/make: targets/kernel.test.xml test.properties
Date Tue, 21 Nov 2006 03:19:03 GMT


Alexey Varlamov wrote:
 > 2006/11/21, Geir Magnusson Jr. <geir@pobox.com>:
 >>
 >>
 >> Alexey Varlamov wrote:
 >> > Folks,
 >> >
 >> > I've just did a little step in improving pre-commit testing for DRLVM;
 >> > most important change is a move from "perTest" forking mode to "once"
 >> > (aka sameVM mode).
 >> > This reduces testing time drastically (~50%), but may introduce some
 >> > extra instability (like new intermittent failures or timeouts).
 >>
 >> Plus the inability to figure out what's screwing things up.
 >>
 >> I can't decide if I like this.  On one hand, I like it because it's
 >> actually better to find side-effects - some test can pass, but still
 >> leave the VM in a broken state that another test will show.
 >>
 >> OTOH, it does remove the clarity of each test being a single, separate
 >> test.  It conceptually mixes integration testing with unit testing.
 >
 > Well, initially purpose for the kernel tests *is* unit testing and
 > AFAIU they were written with this in mind (with some exceptions
 > maybe). For conceptual purity we should re-group tests in the first
 > place - drop some trivial smoke tests (or move to kernel if
 > appropriate) and extract some complex cases from kernel (e.g. from
 > RuntimeTest or SystemExtensionTest).
 > So, I see no point to soothe ourselves with successful "perTest" runs
 > if we know the same simple tests may fail in sameVM mode.

I don't _know_ that.  What I'm pointing out is that we simply need a way 
to switch between modes, because it's useful to help figure out what's 
causing the problem.


 >
 >>
 >> Can you please just add a switch?  That way in the event of a failure,
 >> we can re-run with forking on, and therefore can tell if the crash is
 >> specifically due to the test that is crashing, or a side effect caused
 >> by something that came before.
 >
 > There is the switch: kernel.test.forkmode=[once|perTest].
 > I just assumed the keys are easily dediced from contents of the
 > test.properties, but probably should have announced them explicitly.
 > OK, here they are with current defaults:
 >
 > kernel.test.mode=jet,opt,int     // list of EEs to run, as configured
 > in the test.properties
 > kernel.test.failfast=off              // allows to abort testing
 > immediately after the first failure
 > kernel.test.forkmode=once     // [once|perTest]
 > kernel.test.timeout=360000

Great stuff - is this documented anywhere (besides here) ?

geir

 >
 >> geir
 >>
 >>
 >>
 >> > Nevertheless I believe we are ready to accept this challenge and it is
 >> > important to take it earlier.
 >> > Other enhancements, are described below; hopefully will make us more
 >> > productive. Have fun!
 >> >
 >> >
 >> > 2006/11/20, varlax@apache.org <varlax@apache.org>:
 >> >> Author: varlax
 >> >> Date: Mon Nov 20 03:27:39 2006
 >> >> New Revision: 477149
 >> >>
 >> >> URL: http://svn.apache.org/viewvc?view=rev&rev=477149
 >> >> Log:
 >> >> Refactored kernel.test.xml, made it more "ant-minded" and added some
 >> >> features:
 >> >> [+] "kernel.test.forkmode" support, "once" by default;
 >> >> [+] single "test.case" support;
 >> >> [+] "kernel.test.failfast" behaviour support;
 >> >> [!] Improved results reporting;
 >> >> [+] easy customization via property file;
 >> >>
 >> >> Some intermittent failures appeared on Win32 due to forking only
 >> >> "once", but we must meet them sooner or later - why not now...
 >> >>
 >> >> Added:
 >> >>    harmony/enhanced/drlvm/trunk/build/make/test.properties
 >> >> Modified:
 >> >>    harmony/enhanced/drlvm/trunk/build/make/targets/kernel.test.xml
 >> >>
 >> >> Modified: 
harmony/enhanced/drlvm/trunk/build/make/targets/kernel.test.xml
 >> >> URL:
 >> >> 
http://svn.apache.org/viewvc/harmony/enhanced/drlvm/trunk/build/make/targets/kernel.test.xml?view=diff&rev=477149&r1=477148&r2=477149
 >> >>
 >> >> 
==============================================================================
 >> >>
 >> >> --- harmony/enhanced/drlvm/trunk/build/make/targets/kernel.test.xml
 >> >> (original)
 >> >> +++ harmony/enhanced/drlvm/trunk/build/make/targets/kernel.test.xml
 >> >> Mon Nov 20 03:27:39 2006
 >> >> @@ -1,17 +1,18 @@
 >> >>  <!--
 >> >> -    Copyright 2006 The Apache Software Foundation or its licensors,
 >> >> as applicable.
 >> >> -
 >> >> -    Licensed under the Apache License, Version 2.0 (the "License");
 >> >> -    you may not use this file except in compliance with the License.
 >> >> -    You may obtain a copy of the License at
 >> >> -
 >> >> -       http://www.apache.org/licenses/LICENSE-2.0
 >> >> -
 >> >> -    Unless required by applicable law or agreed to in writing, 
software
 >> >> -    distributed under the License is distributed on an "AS IS" 
BASIS,
 >> >> -    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
 >> >> implied.
 >> >> -    See the License for the specific language governing 
permissions and
 >> >> -    limitations under the License.
 >> >> +     Licensed to the Apache Software Foundation (ASF) under one 
or more
 >> >> +     contributor license agreements.  See the NOTICE file 
distributed
 >> >> with
 >> >> +     this work for additional information regarding copyright 
ownership.
 >> >> +     The ASF licenses this file to You under the Apache License,
 >> >> Version 2.0
 >> >> +     (the "License"); you may not use this file except in compliance
 >> >> with
 >> >> +     the License.  You may obtain a copy of the License at
 >> >> +
 >> >> +         http://www.apache.org/licenses/LICENSE-2.0
 >> >> +
 >> >> +     Unless required by applicable law or agreed to in writing, 
software
 >> >> +     distributed under the License is distributed on an "AS IS" 
BASIS,
 >> >> +     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
 >> >> implied.
 >> >> +     See the License for the specific language governing 
permissions and
 >> >> +     limitations under the License.
 >> >>  -->
 >> >>
 >> >>  <project name="KERNEL TESTS">
 >> >> @@ -20,7 +21,9 @@
 >> >>     <property name="kernel.test.dir"
 >> >> location="${build.semi.dir}/kernel.tests"/>
 >> >>     <property name="test.resource.path"
 >> >> location="${kernel.test.dir}/resources"/>
 >> >>     <property name="test.class.path"
 >> >> location="${kernel.test.dir}/classes"/>
 >> >> -
 >> >> +
 >> >> +    <property name="test.jvm.exe" 
value="${build.deploy.dir}/bin/java"/>
 >> >> +    <property file="test.properties"/>
 >> >>
 >> >>     <patternset id="kernel.test.java.pattern">
 >> >>         <include name="org/apache/harmony/**/*Test.java" />
 >> >> @@ -36,68 +39,58 @@
 >> >>         <exclude name="java/lang/RuntimeAdditionalTest40.java" />
 >> >>         <exclude name="java/lang/RuntimeAdditionalTest41.java" />
 >> >>         <exclude name="java/lang/RuntimeAdditionalTest42.java" />
 >> >> -
 >> >> -       <!-- This test fails -->
 >> >> -       <!--exclude name="java/lang/ThreadTest.java" /-->
 >> >>     </patternset>
 >> >> -
 >> >> -    <property name="vm.use_verifier" value="1" />
 >> >> -    <property name="kernel.test.timeout" value="360000" />
 >> >>
 >> >> -    <target name="kernel.test" depends="-pre-kernel-test">
 >> >> -        <property name="test.mode" value="jet+opt+int" />
 >> >> -        <if>
 >> >> -            <contains string="${test.mode}" substring="batch" />
 >> >> -            <then>
 >> >> -                <antcallback target="-run-kernel-test-batch"
 >> >> -                    return="batch.status">
 >> >> -                </antcallback>
 >> >> -            </then>
 >> >> -        </if>
 >> >> -        <if>
 >> >> -            <contains string="${test.mode}" substring="jet" />
 >> >> -            <then>
 >> >> -                <antcallback target="-run-kernel-test"
 >> >> -                    return="jit.jet.status">
 >> >> -                    <param name="jit.or.interpreter"
 >> >> value="jitrino.jet" />
 >> >> -                    <param name="int.or.jit.arg"
 >> >> value="-Dem.properties=jet" />
 >> >> -                </antcallback>
 >> >> -            </then>
 >> >> -        </if>
 >> >> -        <if>
 >> >> -            <contains string="${test.mode}" substring="opt" />
 >> >> -            <then>
 >> >> -                <antcallback target="-run-kernel-test"
 >> >> -                    return="jit.opt.status">
 >> >> -                    <param name="jit.or.interpreter"
 >> >> value="jitrino.opt" />
 >> >> -                    <param name="int.or.jit.arg"
 >> >> value="-Dem.properties=opt" />
 >> >> -                </antcallback>
 >> >> -            </then>
 >> >> -        </if>
 >> >> -        <if>
 >> >> -            <contains string="${test.mode}" substring="int" />
 >> >> -            <then>
 >> >> -                <antcallback target="-run-kernel-test"
 >> >> -                    return="interpreter.status">
 >> >> -                    <param name="jit.or.interpreter"
 >> >> value="interpreter" />
 >> >> -                    <param name="int.or.jit.arg" value="-Xint" />
 >> >> -                </antcallback>
 >> >> -            </then>
 >> >> -        </if>
 >> >> -        <if>
 >> >> -            <or>
 >> >> -                <contains string="${jit.jet.status}"
 >> >> substring="FAILED" />
 >> >> -                <contains string="${jit.opt.status}"
 >> >> substring="FAILED" />
 >> >> -                <contains string="${interpreter.status}"
 >> >> substring="FAILED" />
 >> >> -                <contains string="${batch.status}" 
substring="FAILED" />
 >> >> -            </or>
 >> >> -            <then>
 >> >> -                <fail message="Kernel tests FAILED" />
 >> >> -            </then>
 >> >> -        </if>
 >> >> -    </target>
 >> >> +    <target name="kernel.test"
 >> >> +        depends="compile-kernel-test, run-kernel-test,
 >> >> report-kernel-test, check-kernel-test"/>
 >> >>
 >> >> -    <target name="compile-kernel-tests" depends="">
 >> >> +    <target name="run-kernel-test" depends="-prepare-kernel-test">
 >> >> +        <condition property="kernel.test.continue" value="true"
 >> >> else="false">
 >> >> +            <isfalse value="${kernel.test.failfast}"/>
 >> >> +        </condition>
 >> >> +        <for list="${kernel.test.mode}" param="mode"
 >> >> +            trim="true" keepgoing="${kernel.test.continue}">
 >> >> +            <sequential>
 >> >> +                <antcall target="-run-kernel-test-batch">
 >> >> +                    <param name="kernel.mode" value="@{mode}" />
 >> >> +                </antcall>
 >> >> +            </sequential>
 >> >> +        </for>
 >> >> +    </target>
 >> >> +
 >> >> +    <target name="report-kernel-test">
 >> >> +        <for list="${kernel.test.mode}" param="mode"
 >> >> +            trim="true" keepgoing="true">
 >> >> +            <sequential>
 >> >> +                <junitreport
 >> >> todir="${kernel.test.dir}/reports/@{mode}.mode">
 >> >> +                    <fileset
 >> >> dir="${kernel.test.dir}/reports/@{mode}.mode">
 >> >> +                        <include name="*.xml" />
 >> >> +                    </fileset>
 >> >> +                    <report format="frames"
 >> >> +
 >> >> todir="${kernel.test.dir}/reports/@{mode}.mode/html" />
 >> >> +                </junitreport>
 >> >> +            </sequential>
 >> >> +        </for>
 >> >> +    </target>
 >> >> +
 >> >> +    <target name="check-kernel-test">
 >> >> +        <loadfile property="kernel.test.summary"
 >> >> +            srcFile="${kernel.test.dir}/reports/summary"/>
 >> >> +        <echo message=" 
***************************${line.separator}"/>
 >> >> +        <echo message="  *** Kernel tests status 
***${line.separator}"/>
 >> >> +        <echo message=" 
***************************${line.separator}"/>
 >> >> +        <echo message="${line.separator}"/>
 >> >> +        <echo message="${kernel.test.summary}"/>
 >> >> +        <echo message="${line.separator}"/>
 >> >> +        <echo>Please find detailed results under
 >> >> ${kernel.test.dir}/reports directory.</echo>
 >> >> +
 >> >> +        <condition property="kernel.failures">
 >> >> +            <contains string="${kernel.test.summary}"
 >> >> substring="FAILED" />
 >> >> +        </condition>
 >> >> +        <fail if="kernel.failures" message="There were test
 >> >> failures." />
 >> >> +    </target>
 >> >> +
 >> >> +    <target name="compile-kernel-test">
 >> >>         <mkdir dir="${test.resource.path}" />
 >> >>         <javac srcdir="${kernel.test.javasrc}/../kernel_resources"
 >> >>             destdir="${test.resource.path}"
 >> >> @@ -111,177 +104,61 @@
 >> >>         <delete quiet="true" dir="${test.class.path}/notfound" />
 >> >>     </target>
 >> >>
 >> >> -    <target name="-pre-kernel-test" depends="compile-kernel-tests">
 >> >> +    <target name="-prepare-kernel-test">
 >> >> +        <delete quiet="true" dir="${kernel.test.dir}/reports" />
 >> >> +        <mkdir dir="${kernel.test.dir}/reports" />
 >> >> +
 >> >>         <condition property="junit.jar" 
value="${junit.home}/junit.jar">
 >> >>             <isset property="junit.home" />
 >> >>         </condition>
 >> >> -        <property name="junit.jar"
 >> >> 
location="${external.dep.CLASSLIB}/depends/jars/junit_3.8.2/junit.jar"/>
 >> >> -        <if>
 >> >> -            <not>
 >> >> -                <available file="${junit.jar}"/>
 >> >> -            </not>
 >> >> -            <then>
 >> >> -                <echo>
 >> >> +        <property name="junit.jar"
 >> >> +
 >> >> 
location="${external.dep.CLASSLIB}/depends/jars/junit_3.8.2/junit.jar"/>
 >> >> +        <available file="${junit.jar}" property="junit.found"/>
 >> >> +        <fail unless="junit.found">
 >> >>                 ==============================================
 >> >>                 Please set the classpath of junit as follows:
 >> >>                 build.bat -Djunit.jar=%JUNIT_HOME% test
 >> >>                 ==============================================
 >> >> -                </echo>
 >> >> -                <fail message="Kernel tests misconfigured" />
 >> >> -            </then>
 >> >> -        </if>
 >> >> -
 >> >> -        <delete quiet="true" dir="${kernel.test.dir}/reports" />
 >> >> -        <delete quiet="true" dir="${kernel.test.dir}/ref-reports" />
 >> >> -        <mkdir dir="${kernel.test.dir}/reports" />
 >> >> -        <mkdir dir="${kernel.test.dir}/ref-reports" />
 >> >> -
 >> >> +        </fail>
 >> >>     </target>
 >> >>
 >> >>     <target name="-run-kernel-test-batch">
 >> >> +        <propertycopy property="kernel.mode.name"
 >> >> from="${kernel.mode}.name" override="on"/>
 >> >> +        <propertycopy property="kernel.mode.switch"
 >> >> from="${kernel.mode}.switch" override="on"/>
 >> >> +        <echo>
 >> >> +        ==================================
 >> >> +        Run kernel tests using ${kernel.mode.name}
 >> >> +        ==================================
 >> >> +        </echo>
 >> >>         <property name="report.dir"
 >> >> -            location="${kernel.test.dir}/reports/batch.mode"/>
 >> >> + 
location="${kernel.test.dir}/reports/${kernel.mode}.mode"/>
 >> >>         <mkdir dir="${report.dir}" />
 >> >>
 >> >> -        <junit fork="yes" forkmode="once"
 >> >> timeout="${kernel.test.timeout}"
 >> >> -            haltonfailure="no" failureproperty="batch.failed"
 >> >> -            filtertrace="no" printsummary="on"
 >> >> -            jvm="${build.deploy.dir}/bin/java">
 >> >> -
 >> >> -            <env key="JAVA_HOME" value="${build.deploy.dir}"/>
 >> >> +        <junit fork="yes" failureproperty="kernel.failed"
 >> >> +            filtertrace="no" printsummary="on" showoutput="off"
 >> >> +            haltonfailure="${kernel.test.failfast}"
 >> >> +            forkmode="${kernel.test.forkmode}"
 >> >> +            timeout="${kernel.test.timeout}"
 >> >> +            jvm="${test.jvm.exe}">
 >> >>
 >> >> -            <jvmarg 
value="-Dtest.resource.path=${test.resource.path}"/>
 >> >>             <jvmarg value="-Dvm.assert_dialog=0" />
 >> >> +            <jvmarg 
value="-Dtest.resource.path=${test.resource.path}"/>
 >> >> +            <jvmarg value="${kernel.mode.switch}" />
 >> >>             <jvmarg
 >> >> 
value="-Xbootclasspath/a:${junit.jar}${path.separator}${test.class.path}"
 >> >> />
 >> >> -            <formatter type="brief"/>
 >> >> -            <batchtest todir="${report.dir}">
 >> >> +            <formatter type="xml"/>
 >> >> +            <batchtest todir="${report.dir}" unless="test.case">
 >> >>                 <fileset dir="${kernel.test.javasrc}">
 >> >>                     <patternset refid="kernel.test.java.pattern"/>
 >> >>                 </fileset>
 >> >>             </batchtest>
 >> >> +            <test name="${test.case}" todir="${report.dir}"
 >> >> if="test.case" />
 >> >>         </junit>
 >> >>
 >> >> -        <condition property="batch.status" value="FAILED" 
else="PASSED">
 >> >> -            <isset property="batch.failed" />
 >> >> +        <condition property="kernel.status" value="FAILED"
 >> >> else="PASSED">
 >> >> +            <isset property="kernel.failed" />
 >> >>         </condition>
 >> >> -    </target>
 >> >> -
 >> >> -
 >> >> -    <target name="-run-kernel-test">
 >> >> -        <echo>
 >> >> -               ==================================
 >> >> -               Run kernel tests using ${jit.or.interpreter}
 >> >> -               ==================================
 >> >> -               </echo>
 >> >> -
 >> >> -        <property name="report.dir"
 >> >> -
 >> >> location="${kernel.test.dir}/reports/${jit.or.interpreter}"/>
 >> >> -        <mkdir dir="${report.dir}" />
 >> >> -
 >> >> -        <for param="test">
 >> >> -            <fileset dir="${kernel.test.javasrc}">
 >> >> -                <patternset refid="kernel.test.java.pattern" />
 >> >> -            </fileset>
 >> >> -            <sequential>
 >> >> -
 >> >> -                <basename property="last.dir"
 >> >> file="${kernel.test.javasrc}" />
 >> >> -                <propertyregex property="class.name" override="true"
 >> >> input="@{test}" regexp="(.)+${last.dir}\${file.separator}" replace=""
 >> >> defaultValue="@{test}" />
 >> >> -                <propertyregex property="class.name" override="true"
 >> >> input="${class.name}" regexp="\.java" replace=""
 >> >> defaultValue="${class.name}" />
 >> >> -                <propertyregex property="class.name" override="true"
 >> >> input="${class.name}" regexp="\${file.separator}" replace="."
 >> >> global="true" defaultValue="${class.name}" />
 >> >> -                <echo message="RUNNING : ${class.name}" />
 >> >> -
 >> >> -                <junit fork="yes" failureproperty="@{test}.failed"
 >> >> -                    timeout="${kernel.test.timeout}"
 >> >> newenvironment="yes" filtertrace="no"
 >> >> -                    jvm="${build.deploy.dir}/bin/java">
 >> >> -
 >> >> -                    <env key="JAVA_HOME" 
value="${build.deploy.dir}"/>
 >> >> -
 >> >> -                    <!--env key="LD_LIBRARY_PATH"
 >> >> value="${build.deploy.dir}/bin:${env.LD_LIBRARY_PATH}" /-->
 >> >> -                    <env key="SYSTEMDRIVE" 
value="${env.SystemDrive}" />
 >> >> -                    <env key="HOME" value="${env.HOME}" />
 >> >> -                    <env key="PATH" value="${env.PATH}" />
 >> >> -                    <jvmarg
 >> >> value="-Dtest.resource.path=${test.resource.path}"/>
 >> >> -                    <jvmarg
 >> >> value="-Demma.coverage.out.file=${emma.coverage.out}" />
 >> >> -                    <jvmarg 
value="-Demma.coverage.out.merge=true" />
 >> >> -                    <jvmarg
 >> >> 
value="-Xbootclasspath/p:${emma.coverage.ip}${path.separator}${emma.jar}"
 >> >> />
 >> >> -                    <jvmarg
 >> >> value="-Dvm.use_verifier=${vm.use_verifier}" />
 >> >> -                    <jvmarg value="-Dvm.assert_dialog=0" />
 >> >> -                    <jvmarg
 >> >> 
value="-Xbootclasspath/a:${junit.jar}${path.separator}${test.class.path}"
 >> >> />
 >> >> -                    <jvmarg value="${int.or.jit.arg}" />
 >> >> -                    <jvmarg value="-ea:java.lang.reflect..." />
 >> >> -                    <formatter type="brief"/>
 >> >> -                    <formatter type="xml" />
 >> >> -                    <test name="${class.name}" 
todir="${report.dir}"/>
 >> >> -                </junit>
 >> >> -                <condition property="${jit.or.interpreter}.status"
 >> >> value="FAILED">
 >> >> -                    <isset property="@{test}.failed" />
 >> >> -                </condition>
 >> >> -
 >> >> -                <!--
 >> >> -                Gregory
 >> >> -                It appears that some kernel unit tests for drlvm
 >> >> classes are
 >> >> -                implementation specific and may fail on RI. So it
 >> >> makes no
 >> >> -                sense to check tests on RI. Also running test on RI
 >> >> -                right after it failed on drlvm creates wrong 
test run
 >> >> report.
 >> >> -
 >> >> -                I am commenting this block for now in case someone
 >> >> wants it
 >> >> -                back, possibly under some condition. My POV is 
that this
 >> >> -                block should be removed eventually.
 >> >> -                <if>
 >> >> -                    <or>
 >> >> -                        <isset property="@{test}.failed" />
 >> >> -                        <isset property="kernel.test.reference" />
 >> >> -                    </or>
 >> >> -                    <then>
 >> >> -                        <junit fork="yes"
 >> >> failureproperty="@{test}.ref.failed"
 >> >> -                            timeout="${kernel.test.timeout}"
 >> >> -                            newenvironment="yes" filtertrace="no">
 >> >> -
 >> >> -
 >> >> -                            <env key="JAVA_HOME"
 >> >> value="${build.deploy.dir}"/>
 >> >> -
 >> >> -                            <!- -env key="LD_LIBRARY_PATH"
 >> >> value="${build.deploy.dir}/bin:${env.LD_LIBRARY_PATH}" /- ->
 >> >> -                            <env key="SYSTEMDRIVE"
 >> >> value="${env.SystemDrive}" />
 >> >> -                            <env key="HOME" value="${env.HOME}" />
 >> >> -                            <env key="PATH" value="${env.PATH}" />
 >> >> -                            <jvmarg
 >> >> value="-Dtest.resource.path=${test.resource.path}"/>
 >> >> -                            <jvmarg
 >> >> 
value="-Xbootclasspath/a:${junit.jar}${path.separator}${test.class.path}"
 >> >> />
 >> >> -                            <formatter type="brief"/>
 >> >> -                            <formatter type="xml" />
 >> >> -                            <test name="${class.name}"
 >> >> todir="${kernel.test.dir}/ref-reports"/>
 >> >> -                        </junit>
 >> >> -
 >> >> -                        <if>
 >> >> -                            <isset property="@{test}.ref.failed" />
 >> >> -                            <then>
 >> >> -                                <echo message="   **** FAILED on
 >> >> reference JRE ****" />
 >> >> -                            </then>
 >> >> -                        </if>
 >> >> -                    </then>
 >> >> -                </if>
 >> >> -                /-->
 >> >> -            </sequential>
 >> >> -        </for>
 >> >> -
 >> >> -        <junitreport todir="${report.dir}">
 >> >> -            <fileset dir="${report.dir}">
 >> >> -                <include name="TEST-*.xml" />
 >> >> -            </fileset>
 >> >> -            <report format="frames" todir="${report.dir}/html" />
 >> >> -        </junitreport>
 >> >> -        <junitreport todir="${kernel.test.dir}/ref-reports">
 >> >> -            <fileset dir="${kernel.test.dir}/ref-reports">
 >> >> -                <include name="TEST-*.xml" />
 >> >> -            </fileset>
 >> >> -            <report format="frames"
 >> >> todir="${kernel.test.dir}/ref-reports/html" />
 >> >> -        </junitreport>
 >> >> -        <property name="${jit.or.interpreter}.status" 
value="PASSED"/>
 >> >> -        <propertycopy name="status"
 >> >> from="${jit.or.interpreter}.status"/>
 >> >> -        <echo message="" />
 >> >> -        <echo
 >> >> message="==============================================" />
 >> >> -        <echo message="Kernel tests ${status} using
 >> >> ${jit.or.interpreter}. Please find the detailed results here:" />
 >> >> -        <echo
 >> >> 
message="${report.dir}${file.separator}html${file.separator}index.html"
 >> >> />
 >> >> -        <echo
 >> >> message="==============================================" />
 >> >>
 >> >> +        <concat append="on"
 >> >> destfile="${kernel.test.dir}/reports/summary"
 >> >> +            >      ${kernel.mode.name}
 >> >> ${kernel.status}${line.separator}</concat>
 >> >>     </target>
 >> >>  </project>
 >> >>
 >> >> Added: harmony/enhanced/drlvm/trunk/build/make/test.properties
 >> >> URL:
 >> >> 
http://svn.apache.org/viewvc/harmony/enhanced/drlvm/trunk/build/make/test.properties?view=auto&rev=477149
 >> >>
 >> >> 
==============================================================================
 >> >>
 >> >> --- harmony/enhanced/drlvm/trunk/build/make/test.properties (added)
 >> >> +++ harmony/enhanced/drlvm/trunk/build/make/test.properties Mon 
Nov 20
 >> >> 03:27:39 2006
 >> >> @@ -0,0 +1,19 @@
 >> >> +kernel.test.mode=jet,opt,int
 >> >> +kernel.test.failfast=off
 >> >> +kernel.test.forkmode=once
 >> >> +kernel.test.timeout=360000
 >> >> +
 >> >> +
 >> >> +jit.name=Client mode JIT (default)
 >> >> +jit.switch=-Dbogus
 >> >> +
 >> >> +jet.name=jitrino.JET
 >> >> +jet.switch=-Xem:jet
 >> >> +
 >> >> +opt.name=jitrino.OPT
 >> >> +opt.switch=-Xem:opt
 >> >> +
 >> >> +int.name=interpreter
 >> >> +int.switch=-Xint
 >> >> +
 >> >> +
 >> >>
 >> >>
 >> >>
 >> >
 >>
 >


Mime
View raw message