harmony-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From smish...@apache.org
Subject svn commit: r650094 - in /harmony/standard/site: docs/subcomponents/buildtest/howto.html docs/subcomponents/buildtest/index.html xdocs/subcomponents/buildtest/howto.xml xdocs/subcomponents/buildtest/index.xml
Date Mon, 21 Apr 2008 10:51:05 GMT
Author: smishura
Date: Mon Apr 21 03:50:59 2008
New Revision: 650094

URL: http://svn.apache.org/viewvc?rev=650094&view=rev
Log:
Add 'howto' page for integrity testing.

Added:
    harmony/standard/site/docs/subcomponents/buildtest/howto.html   (with props)
    harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml   (with props)
Modified:
    harmony/standard/site/docs/subcomponents/buildtest/index.html
    harmony/standard/site/xdocs/subcomponents/buildtest/index.xml

Added: harmony/standard/site/docs/subcomponents/buildtest/howto.html
URL: http://svn.apache.org/viewvc/harmony/standard/site/docs/subcomponents/buildtest/howto.html?rev=650094&view=auto
==============================================================================
--- harmony/standard/site/docs/subcomponents/buildtest/howto.html (added)
+++ harmony/standard/site/docs/subcomponents/buildtest/howto.html Mon Apr 21 03:50:59 2008
@@ -0,0 +1,392 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+
+<!--
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements. See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to You under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+
+<!-- start the processing -->
+    <!-- ====================================================================== -->
+    <!-- GENERATED FILE, DO NOT EDIT, EDIT THE XML FILE IN xdocs INSTEAD! -->
+    <!-- Main Page Section -->
+    <!-- ====================================================================== -->
+    <html>
+        <head>
+            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+
+                                                    <meta name="author" value="Harmony
Documentation Team">
+            <meta name="email" value="dev@harmony.apache.org">
+            
+           
+            
+            
+            
+            
+            
+            <title>Apache Harmony - HowTo for Build-Test Framework</title>
+
+                        
+                        
+        <link rel="stylesheet" type="text/css" href="../../css/site.css" media="all" />
+        <link rel="stylesheet" type="text/css" href="../../css/screen.css" media="screen"
/>
+        <link rel="stylesheet" type="text/css" href="../../css/print.css" media="print"
/>
+
+                        
+        </head>
+
+        <body>
+            <div id="pageHeader">
+            <!-- Logo -->
+                        <a id="harmonyLogo" href="http://harmony.apache.org/"><img
src="../../images/harmony-logo-new.png" alt="Apache Harmony"
+          width="415" height="50" /></a>
+      
+            <!-- Advertisement -->
+            <a href="http://eu.apachecon.com">
+                <img id="advertisement"
+                     src="http://eu.apachecon.com/eu2008/images/buttons/basic_234x60.jpg"
+                     width="234" height="60"
+                     alt="ApacheCon Europe 2008" /></a>
+            </div> <!-- pageHeader -->
+
+            <div id="navigationmenu">
+                    <!-- LEFT SIDE NAVIGATION -->
+                
+    <!-- ============================================================ -->
+
+                <p class="menuItem">General</p>
+        <ul>
+                    <li class="menuItem">    <a href="../../index.html">Home</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../license.html">License</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../contribution_policy.html">Contribution
Policy</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../download.cgi">Downloads</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../bundles.html">Bundles</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../faq.html">FAQ</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../sitemap.html">Sitemap</a>
+</li>
+           
+                        
+        
+        </ul>
+            <p class="menuItem">Community</p>
+        <ul>
+                    <li class="menuItem">    <a href="../../get-involved.html">Get
Involved</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../contributors.html">Who
we are</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../mailing.html">Mailing
Lists</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="http://issues.apache.org/jira/browse/HARMONY">Bug
Tracker</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../related.html">Other
Projects</a>
+</li>
+           
+                        
+        
+        </ul>
+            <p class="menuItem">Development</p>
+        <ul>
+                    <li class="menuItem">    <a href="../../svn.html">Source
Code</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../quickhelp_contributors.html">Getting
Started</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../roadmap.html">Project
Roadmap</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../issue_resolution_guideline.html">Resolution
Guideline</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../performance.html">Performance</a>
+</li>
+           
+                        
+        
+        </ul>
+            <p class="menuItem">Documentation</p>
+        <ul>
+                    <li class="menuItem">    <a href="http://www.jdocs.com/harmony/5.M5/overview-summary.html">API
Reference</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="http://wiki.apache.org/harmony">Wiki</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../subcomponents/drlvm/index.html">DRLVM</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../subcomponents/classlibrary/index.html">Class
Library</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="../../subcomponents/buildtest/index.html">Build-test
Framework</a>
+</li>
+           
+                        
+        
+        </ul>
+            <p class="menuItem">Foundation</p>
+        <ul>
+                    <li class="menuItem">    <a href="http://apache.org">ASF</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="http://www.apache.org/foundation/sponsorship.html
">Sponsorship</a>
+</li>
+           
+                        
+                    <li class="menuItem">    <a href="http://www.apache.org/foundation/thanks.html
">Thanks</a>
+</li>
+           
+                        
+        
+        </ul>
+                </div>
+
+            <!-- MAIN CONTENT -->
+            <div id="top">
+                                                        <h1>
+      <a name="Short Integrity Cycle">Short Integrity Cycle</a>
+    </h1>
+                        <a name="Short" />
+                                <p>
+      If there is a need to establish short integrity cycle which ensures that
+      the code is compliable and basic functionality is not broken. Then such
+      cycle can be organized in pretty straightforward way. Let’s take EHWA-API
+      as test scenario and run it on DRLVM:
+    </p>
+                                <p>
+      1) Install the same <a href="../../quickhelp_contributors.html">tools</a>,

+      as for building the Apache Harmony components.
+    </p>
+                                <p>
+      2) Check out the infrastructure from SVN repository:
+      <pre>svn co http://svn.apache.org/repos/asf/harmony/enhanced/buildtest/trunk/infra</pre>
+    </p>
+                                <p>
+      3) Change directory to the infrastructure directory and create the next
+      ‘framework.local.properties’ in it
+      <pre>
+# Setup for mail notifications
+framework.parameters.usemail=<i>&lt;your_smtp_server&gt;</i>
+framework.parameters.usemail.to=<i>&lt;list_of_recipients&gt;</i>
+framework.parameters.usemail.from=<i>&lt;test_account_name&gt;</i>
+
+# Suffix for notifications' subject
+framework.parameters.usemail.subject.suffix=debug
+
+# Send notification only if suite status changes
+framework.parameters.usemail.always=false
+
+# Enable notifications for Class library and DRLVM (disabled by default)
+classlib.parameters.cc.publish=true
+drlvm.parameters.cc.publish=true
+
+# Directory to store archived results
+framework.parameters.optional.upload.dir=<i>&lt;results_dir&gt;</i>
+      </pre>
+    </p>
+                                <p>
+      4) Run the following commands:
+      <pre>
+ant -Dtest.suites="classlib,drlvm,ehwa-api" install
+ant setup
+ant run-cc
+      </pre>
+    </p>
+                                <p>
+      These steps launches <code>CruiseControl</code> with
+      Class library, DRLVM and EHWA-API test scenario.
+      Alerts notifications are sent to specified
+      <i>${framework.parameters.usemail.to}</i> and test results can
+      be found in <i>${framework.parameters.optional.upload.dir}</i>
+      The testing cycle is triggered by update of Class library or
+      DRLVM source code in
+      <a href="http://svn.apache.org/viewcvs.cgi/harmony/?root=Apache-SVN">SVN repository</a>.
+    </p>
+                <p class="backtotop"><a href="#top">Back to top</a></p>
+                                        <h1>
+      <a name="Extended Integrity Cycle">Extended Integrity Cycle</a>
+    </h1>
+                        <a name="Extended" />
+                                <p>
+      Let's setup integrity cycle which is targeted to catch regression early.
+      So the cycle is based on HDK and runs unit tests from Class library,
+      DRLVM and JDKTools workspaces. Also let's optimize disk space usage and
+      run unit suites in built HDK workspace (by default they are checked out
+      to a separate workspace)
+    </p>
+                                <p>
+      1) Install the same <a href="../../quickhelp_contributors.html">tools</a>,

+      as for building the Apache Harmony components.
+    </p>
+                                <p>
+      2) Check out the infrastructure from SVN repository:
+      <pre>svn co http://svn.apache.org/repos/asf/harmony/enhanced/buildtest/trunk/infra</pre>
+    </p>
+                                <p>
+      3) Change directory to the infrastructure directory and setup HDK
+      workspace first.
+      <pre>
+ant -Dtest.suites="hdk" install
+ant setup
+      </pre>
+      After that step there is HDK workspace that is used to configure/setup
+      unit tests.
+    </p>
+                                <p>
+      3) Create the next ‘framework.local.properties’:
+      <pre>
+# Setup for mail notifications
+framework.parameters.usemail=<i>&lt;your_smtp_server&gt;</i>
+framework.parameters.usemail.to=<i>&lt;list_of_recipients&gt;</i>
+framework.parameters.usemail.from=<i>&lt;test_account_name&gt;</i>
+
+# Suffix for notifications' subject
+framework.parameters.usemail.subject.suffix=debug
+
+# Send notification only if suite status changes
+framework.parameters.usemail.always=false
+
+# Directory to store archived results
+framework.parameters.optional.upload.dir=<i>&lt;results_dir&gt;</i>
+
+# Unit tests depend on HDK build now (by default they depend on DRLVM)
+classlib-test.parameters.depends=hdk
+drlvm-reg-test.parameters.depends=hdk
+drlvm-test.parameters.depends=hdk
+jdktools-test.parameters.depends=hdk
+
+# Tests are run in HDK workspace against HDK's JRE 
+classlib-test.parameters.required.tested.jre=${hdk.parameters.shared.binaries.jre.dir}
+classlib-test.parameters.required.trunk.dir=${hdk.parameters.shared.classlib.trunk.dir}
+classlib-test.parameters.svn.classlib.dir=hdk/working_classlib
+
+drlvm-test.parameters.required.built.drlvm.trunk=${hdk.parameters.shared.drlvm.trunk.dir}
+drlvm-test.parameters.required.common.resources=${hdk.parameters.shared.common.resources.dir}
+drlvm-test.parameters.required.drlvm.config=debug
+
+drlvm-reg-test.parameters.required.built.drlvm.trunk=${hdk.parameters.shared.drlvm.trunk.dir}
+drlvm-reg-test.parameters.required.common.resources=${hdk.parameters.shared.common.resources.dir}
+drlvm-reg-test.parameters.required.drlvm.config=debug
+
+jdktools-test.parameters.required.built.trunk.dir=${hdk.parameters.shared.jdktools.trunk.dir}
+jdktools-test.parameters.svn.jdktools.dir=hdk/working_jdktools
+      </pre>
+    </p>
+                                <p>
+      4) Run the following commands:
+      <pre>
+ant -Dtest.suites="hdk,classlib-test,drlvm-test,drlvm-reg-test,jdktools-test" install
+ant setup
+ant run-cc
+      </pre>
+    </p>
+                                <p>
+      These steps launches <code>CruiseControl</code> that build HDK
+      and runs unit tests. The testing cycle is triggered by update of HDK
+      source code in
+      <a href="http://svn.apache.org/viewcvs.cgi/harmony/?root=Apache-SVN">SVN repository</a>.
+      Alerts notifications are sent to specified
+      <i>${framework.parameters.usemail.to}</i> and test results can
+      be found in <i>${framework.parameters.optional.upload.dir}</i>
+    </p>
+                <p class="backtotop"><a href="#top">Back to top</a></p>
+                                        <h1>
+      <a name="Snapshot Cycle">Snapshot Cycle</a>
+    </h1>
+                        <a name="Snapshot" />
+                                <p>
+      <i>TODO</i>.
+    </p>
+                <p class="backtotop"><a href="#top">Back to top</a></p>
+                                        <h1>
+      <a name="Integrate New Suite/Scenario">Integrate New Suite/Scenario</a>
+    </h1>
+                        <a name="NewSuite" />
+                                <p>
+      <i>TODO</i>.
+    </p>
+                <p class="backtotop"><a href="#top">Back to top</a></p>
+                
+                                            </div> <!-- top aka Main Content -->
+
+            <!-- FOOTER -->
+            <div id="pageFooter" class="special"><em>
+                Copyright &#169; 2003-2008, The Apache Software Foundation
+            </em></div>
+
+            <!-- Google analytics tracker code -->
+            <script
+                src="http://www.google-analytics.com/urchin.js"
+                type="text/javascript" />
+            <script type="text/javascript">
+              _uacct = "UA-1973333-3";
+              urchinTracker();
+            </script>
+        </body>
+    </html>
+<!-- end the processing -->
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

Propchange: harmony/standard/site/docs/subcomponents/buildtest/howto.html
------------------------------------------------------------------------------
    svn:eol-style = native

Modified: harmony/standard/site/docs/subcomponents/buildtest/index.html
URL: http://svn.apache.org/viewvc/harmony/standard/site/docs/subcomponents/buildtest/index.html?rev=650094&r1=650093&r2=650094&view=diff
==============================================================================
--- harmony/standard/site/docs/subcomponents/buildtest/index.html (original)
+++ harmony/standard/site/docs/subcomponents/buildtest/index.html Mon Apr 21 03:50:59 2008
@@ -362,8 +362,21 @@
     </h2>
       
                         <p>
-        <i>TODO: add instructions for "How To" setup integrity,
-        snapshot testing, integrate a suite/scenario</i>
+        Please use the next steps for how to organize:
+        <ul>
+          <li>
+            <a href="howto.html#Short">Short intergity testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#Extended">Extended intergity testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#Snapshot">Snapshot testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#NewSuite">Integration of new suite/scenario</a>
+          </li>
+        </ul>
      </p>
                    
                 <p class="backtotop"><a href="#top">Back to top</a></p>

Added: harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml
URL: http://svn.apache.org/viewvc/harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml?rev=650094&view=auto
==============================================================================
--- harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml (added)
+++ harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml Mon Apr 21 03:50:59 2008
@@ -0,0 +1,190 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+
+    Licensed to the Apache Software Foundation (ASF) under one or more
+    contributor license agreements.  See the NOTICE file distributed with
+    this work for additional information regarding copyright ownership.
+    The ASF licenses this file to You under the Apache License, Version 2.0
+    (the "License"); you may not use this file except in compliance with
+    the License.  You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<document>
+
+  <properties>
+    <title>HowTo for Build-Test Framework</title>
+    <author email="dev@harmony.apache.org">Harmony Documentation Team</author>
+  </properties>
+
+ <body>
+
+  <section name="Short Integrity Cycle">
+    <a name="Short" />
+    <p>
+      If there is a need to establish short integrity cycle which ensures that
+      the code is compliable and basic functionality is not broken. Then such
+      cycle can be organized in pretty straightforward way. Let’s take EHWA-API
+      as test scenario and run it on DRLVM:
+    </p>
+    <p>
+      1) Install the same <a href="../../quickhelp_contributors.html">tools</a>,

+      as for building the Apache Harmony components.
+    </p>
+    <p>
+      2) Check out the infrastructure from SVN repository:
+      <pre>svn co http://svn.apache.org/repos/asf/harmony/enhanced/buildtest/trunk/infra</pre>
+    </p>
+    <p>
+      3) Change directory to the infrastructure directory and create the next
+      ‘framework.local.properties’ in it
+      <pre>
+# Setup for mail notifications
+framework.parameters.usemail=<i>&lt;your_smtp_server&gt;</i>
+framework.parameters.usemail.to=<i>&lt;list_of_recipients&gt;</i>
+framework.parameters.usemail.from=<i>&lt;test_account_name&gt;</i>
+
+# Suffix for notifications' subject
+framework.parameters.usemail.subject.suffix=debug
+
+# Send notification only if suite status changes
+framework.parameters.usemail.always=false
+
+# Enable notifications for Class library and DRLVM (disabled by default)
+classlib.parameters.cc.publish=true
+drlvm.parameters.cc.publish=true
+
+# Directory to store archived results
+framework.parameters.optional.upload.dir=<i>&lt;results_dir&gt;</i>
+      </pre>
+    </p>
+    <p>
+      4) Run the following commands:
+      <pre>
+ant -Dtest.suites="classlib,drlvm,ehwa-api" install
+ant setup
+ant run-cc
+      </pre>
+    </p>
+    <p>
+      These steps launches <code>CruiseControl</code> with
+      Class library, DRLVM and EHWA-API test scenario.
+      Alerts notifications are sent to specified
+      <i>${framework.parameters.usemail.to}</i> and test results can
+      be found in <i>${framework.parameters.optional.upload.dir}</i>
+      The testing cycle is triggered by update of Class library or
+      DRLVM source code in
+      <a href="http://svn.apache.org/viewcvs.cgi/harmony/?root=Apache-SVN">SVN repository</a>.
+    </p>
+  </section>
+
+  <section name="Extended Integrity Cycle">
+    <a name="Extended" />
+    <p>
+      Let's setup integrity cycle which is targeted to catch regression early.
+      So the cycle is based on HDK and runs unit tests from Class library,
+      DRLVM and JDKTools workspaces. Also let's optimize disk space usage and
+      run unit suites in built HDK workspace (by default they are checked out
+      to a separate workspace)
+    </p>
+    <p>
+      1) Install the same <a href="../../quickhelp_contributors.html">tools</a>,

+      as for building the Apache Harmony components.
+    </p>
+    <p>
+      2) Check out the infrastructure from SVN repository:
+      <pre>svn co http://svn.apache.org/repos/asf/harmony/enhanced/buildtest/trunk/infra</pre>
+    </p>
+    <p>
+      3) Change directory to the infrastructure directory and setup HDK
+      workspace first.
+      <pre>
+ant -Dtest.suites="hdk" install
+ant setup
+      </pre>
+      After that step there is HDK workspace that is used to configure/setup
+      unit tests.
+    </p>
+    <p>
+      3) Create the next ‘framework.local.properties’:
+      <pre>
+# Setup for mail notifications
+framework.parameters.usemail=<i>&lt;your_smtp_server&gt;</i>
+framework.parameters.usemail.to=<i>&lt;list_of_recipients&gt;</i>
+framework.parameters.usemail.from=<i>&lt;test_account_name&gt;</i>
+
+# Suffix for notifications' subject
+framework.parameters.usemail.subject.suffix=debug
+
+# Send notification only if suite status changes
+framework.parameters.usemail.always=false
+
+# Directory to store archived results
+framework.parameters.optional.upload.dir=<i>&lt;results_dir&gt;</i>
+
+# Unit tests depend on HDK build now (by default they depend on DRLVM)
+classlib-test.parameters.depends=hdk
+drlvm-reg-test.parameters.depends=hdk
+drlvm-test.parameters.depends=hdk
+jdktools-test.parameters.depends=hdk
+
+# Tests are run in HDK workspace against HDK's JRE 
+classlib-test.parameters.required.tested.jre=${hdk.parameters.shared.binaries.jre.dir}
+classlib-test.parameters.required.trunk.dir=${hdk.parameters.shared.classlib.trunk.dir}
+classlib-test.parameters.svn.classlib.dir=hdk/working_classlib
+
+drlvm-test.parameters.required.built.drlvm.trunk=${hdk.parameters.shared.drlvm.trunk.dir}
+drlvm-test.parameters.required.common.resources=${hdk.parameters.shared.common.resources.dir}
+drlvm-test.parameters.required.drlvm.config=debug
+
+drlvm-reg-test.parameters.required.built.drlvm.trunk=${hdk.parameters.shared.drlvm.trunk.dir}
+drlvm-reg-test.parameters.required.common.resources=${hdk.parameters.shared.common.resources.dir}
+drlvm-reg-test.parameters.required.drlvm.config=debug
+
+jdktools-test.parameters.required.built.trunk.dir=${hdk.parameters.shared.jdktools.trunk.dir}
+jdktools-test.parameters.svn.jdktools.dir=hdk/working_jdktools
+      </pre>
+    </p>
+    <p>
+      4) Run the following commands:
+      <pre>
+ant -Dtest.suites="hdk,classlib-test,drlvm-test,drlvm-reg-test,jdktools-test" install
+ant setup
+ant run-cc
+      </pre>
+    </p>
+    <p>
+      These steps launches <code>CruiseControl</code> that build HDK
+      and runs unit tests. The testing cycle is triggered by update of HDK
+      source code in
+      <a href="http://svn.apache.org/viewcvs.cgi/harmony/?root=Apache-SVN">SVN repository</a>.
+      Alerts notifications are sent to specified
+      <i>${framework.parameters.usemail.to}</i> and test results can
+      be found in <i>${framework.parameters.optional.upload.dir}</i>
+    </p>
+
+  </section>
+
+  <section name="Snapshot Cycle">
+    <a name="Snapshot" />
+    <p>
+      <i>TODO</i>.
+    </p>
+  </section>
+
+  <section name="Integrate New Suite/Scenario">
+    <a name="NewSuite" />
+    <p>
+      <i>TODO</i>.
+    </p>
+  </section>
+
+</body>
+</document>

Propchange: harmony/standard/site/xdocs/subcomponents/buildtest/howto.xml
------------------------------------------------------------------------------
    svn:eol-style = native

Modified: harmony/standard/site/xdocs/subcomponents/buildtest/index.xml
URL: http://svn.apache.org/viewvc/harmony/standard/site/xdocs/subcomponents/buildtest/index.xml?rev=650094&r1=650093&r2=650094&view=diff
==============================================================================
--- harmony/standard/site/xdocs/subcomponents/buildtest/index.xml (original)
+++ harmony/standard/site/xdocs/subcomponents/buildtest/index.xml Mon Apr 21 03:50:59 2008
@@ -190,8 +190,21 @@
 
     <subsection name="How To">
       <p>
-        <i>TODO: add instructions for "How To" setup integrity,
-        snapshot testing, integrate a suite/scenario</i>
+        Please use the next steps for how to organize:
+        <ul>
+          <li>
+            <a href="howto.html#Short">Short intergity testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#Extended">Extended intergity testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#Snapshot">Snapshot testing cycle</a>
+          </li>
+          <li>
+            <a href="howto.html#NewSuite">Integration of new suite/scenario</a>
+          </li>
+        </ul>
      </p>
     </subsection>
 



Mime
View raw message