hadoop-common-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From mete <efk...@gmail.com>
Subject Re: Does Hadoop 0.20.205 and Ganglia 3.1.7 compatible with each other ?
Date Tue, 07 Feb 2012 06:36:33 GMT
Same with Merto's situation here, it always overflows short time after the
restart. Without the hadoop metrics enabled everything is smooth.
Regards

Mete

On Tue, Feb 7, 2012 at 4:58 AM, Merto Mertek <masmertoz@gmail.com> wrote:

> I have tried to run it but it repeats crashing..
>
>  - When you start gmetad and Hadoop is not emitting metrics, everything
> >   is peachy.
> >
>
> Right, running just ganglia without running hadoop jobs seems stable for at
> least a day..
>
>
> >   - When you start Hadoop (and it thus starts emitting metrics), gmetad
> >   cores.
> >
>
> True, with a  following error : *** stack smashing detected ***: gmetad
> terminated \n Segmentation fault
>
>     - On my MacBookPro, it's a SIGABRT due to a buffer overflow.
> >
> > I believe this is happening for everyone. What I would like for you to
> try
> > out are the following 2 scenarios:
> >
> >   - Once gmetad cores, if you start it up again, does it core again? Does
> >   this process repeat ad infinitum?
> >
>     - On my MBP, the core is a one-time thing, and restarting gmetad
> >      after the first core makes things run perfectly smoothly.
> >         - I know others are saying this core occurs continuously, but
> they
> >         were all using ganglia-3.1.x, and I'm interested in how
> > ganglia-3.2.0
> >         behaves for you.
> >
>
> It cores everytime I run it. The difference is just that sometimes a
> segmentation faults appears instantly, and sometimes it appears after a
> random time...lets say after a minute of running gmetad and collecting
> data.
>
>
> >         - If you start Hadoop first (so gmetad is not running when the
> >   first batch of Hadoop metrics are emitted) and THEN start gmetad after
> a
> >   few seconds, do you still see gmetad coring?
> >
>
> Yes
>
>
> >      - On my MBP, this sequence works perfectly fine, and there are no
> >      gmetad cores whatsoever.
> >
>
> I have tested this scenario with 2 working nodes so two gmond plus the head
> gmond on the server where gmetad is located. I have checked and all of them
> are versioned 3.2.0.
>
> Hope it helps..
>
>
>
> >
> > Bear in mind that this only addresses the gmetad coring issue - the
> > warnings emitted about '4.9E-324' being out of range will continue, but I
> > know what's causing that as well (and hope that my patch fixes it for
> > free).
> >
> > Varun
> > On Mon, Feb 6, 2012 at 2:39 PM, Merto Mertek <masmertoz@gmail.com>
> wrote:
> >
> > > Yes I am encoutering the same problems and like Mete said  few seconds
> > > after restarting a segmentation fault appears.. here is my conf..
> > > <http://pastebin.com/VgBjp08d>
> > >
> > > And here are some info from /var/log/messages (ubuntu server 10.10):
> > >
> > > kernel: [424447.140641] gmetad[26115] general protection
> ip:7f7762428fdb
> > > > sp:7f776362d370 error:0 in libgcc_s.so.1[7f776241a000+15000]
> > > >
> > >
> > > When I compiled gmetad I used the following command:
> > >
> > > ./configure --with-gmetad --sysconfdir=/etc/ganglia
> > > > CPPFLAGS="-I/usr/local/rrdtool-1.4.7/include"
> > > > CFLAGS="-I/usr/local/rrdtool-1.4.7/include"
> > > > LDFLAGS="-L/usr/local/rrdtool-1.4.7/lib"
> > > >
> > >
> > > The same was tried with rrdtool 1.4.5. My current ganglia version is
> > 3.2.0
> > > and like Mete I tried it with version 3.1.7 but without success..
> > >
> > > Hope we will sort it out soon any solution..
> > > thank you
> > >
> > >
> > > On 6 February 2012 20:09, mete <efkarr@gmail.com> wrote:
> > >
> > > > Hello,
> > > > i also face this issue when using GangliaContext31 and hadoop-1.0.0,
> > and
> > > > ganglia 3.1.7 (also tried 3.1.2). I continuously get buffer overflows
> > as
> > > > soon as i restart the gmetad.
> > > > Regards
> > > > Mete
> > > >
> > > > On Mon, Feb 6, 2012 at 7:42 PM, Vitthal "Suhas" Gogate <
> > > > gogate@hortonworks.com> wrote:
> > > >
> > > > > I assume you have seen the following information on Hadoop twiki,
> > > > > http://wiki.apache.org/hadoop/GangliaMetrics
> > > > >
> > > > > So do you use GangliaContext31 in hadoop-metrics2.properties?
> > > > >
> > > > > We use Ganglia 3.2 with Hadoop 20.205  and works fine (I remember
> > > seeing
> > > > > gmetad sometime goes down due to buffer overflow problem when
> hadoop
> > > > starts
> > > > > pumping in the metrics.. but restarting works.. let me know if you
> > face
> > > > > same problem?
> > > > >
> > > > > --Suhas
> > > > >
> > > > > Additionally, the Ganglia protocol change significantly between
> > Ganglia
> > > > 3.0
> > > > > and Ganglia 3.1 (i.e., Ganglia 3.1 is not compatible with Ganglia
> 3.0
> > > > > clients). This caused Hadoop to not work with Ganglia 3.1; there
> is a
> > > > patch
> > > > > available for this, HADOOP-4675. As of November 2010, this patch
> has
> > > been
> > > > > rolled into the mainline for 0.20.2 and later. To use the Ganglia
> 3.1
> > > > > protocol in place of the 3.0, substitute
> > > > > org.apache.hadoop.metrics.ganglia.GangliaContext31 for
> > > > > org.apache.hadoop.metrics.ganglia.GangliaContext in the
> > > > > hadoop-metrics.properties lines above.
> > > > >
> > > > > On Fri, Feb 3, 2012 at 1:07 PM, Merto Mertek <masmertoz@gmail.com>
> > > > wrote:
> > > > >
> > > > > > I spent a lot of time to figure it out however i did not find
a
> > > > solution.
> > > > > > Problems from the logs pointed me for some bugs in rrdupdate
> tool,
> > > > > however
> > > > > > i tried to solve it with different versions of ganglia and
> rrdtool
> > > but
> > > > > the
> > > > > > error is the same. Segmentation fault appears after the following
> > > > lines,
> > > > > if
> > > > > > I run gmetad in debug mode...
> > > > > >
> > > > > > "Created rrd
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /var/lib/ganglia/rrds/hdcluster/xxx/metricssystem.MetricsSystem.publish_max_time.rrd"
> > > > > > "Created rrd
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /var/lib/ganglia/rrds/hdcluster/xxx/metricssystem.MetricsSystem.snapshot_max_time.rrd
> > > > > > "
> > > > > >
> > > > > > which I suppose are generated from MetricsSystemImpl.java (Is
> there
> > > any
> > > > > way
> > > > > > just to disable this two metrics?)
> > > > > >
> > > > > > From the /var/log/messages there are a lot of errors:
> > > > > >
> > > > > > "xxx gmetad[15217]: RRD_update
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> (/var/lib/ganglia/rrds/hdc/xxx/metricssystem.MetricsSystem.publish_imax_time.rrd):
> > > > > > converting  '4.9E-324' to float: Numerical result out of range"
> > > > > > "xxx gmetad[15217]: RRD_update
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> (/var/lib/ganglia/rrds/hdc/xxx/metricssystem.MetricsSystem.snapshot_imax_time.rrd):
> > > > > > converting  '4.9E-324' to float: Numerical result out of range"
> > > > > >
> > > > > > so probably there are some converting issues ? Where should
I
> look
> > > for
> > > > > the
> > > > > > solution? Would you rather suggest to use ganglia 3.0.x with
the
> > old
> > > > > > protocol and leave the version >3.1 for further releases?
> > > > > >
> > > > > > any help is realy appreciated...
> > > > > >
> > > > > > On 1 February 2012 04:04, Merto Mertek <masmertoz@gmail.com>
> > wrote:
> > > > > >
> > > > > > > I would be glad to hear that too.. I've setup the following:
> > > > > > >
> > > > > > > Hadoop 0.20.205
> > > > > > > Ganglia Front  3.1.7
> > > > > > > Ganglia Back *(gmetad)* 3.1.7
> > > > > > > RRDTool <http://www.rrdtool.org/> 1.4.5. -> i
had some
> troubles
> > > > > > > installing 1.4.4
> > > > > > >
> > > > > > > Ganglia works just in case hadoop is not running, so metrics
> are
> > > not
> > > > > > > publshed to gmetad node (conf with new
> > > hadoop-metrics2.proprieties).
> > > > > When
> > > > > > > hadoop is started, a segmentation fault appears in gmetad
> deamon:
> > > > > > >
> > > > > > > sudo gmetad -d 2
> > > > > > > .......
> > > > > > > Updating host xxx, metric dfs.FSNamesystem.BlocksTotal
> > > > > > > Updating host xxx, metric bytes_in
> > > > > > > Updating host xxx, metric bytes_out
> > > > > > > Updating host xxx, metric
> > > > metricssystem.MetricsSystem.publish_max_time
> > > > > > > Created rrd
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /var/lib/ganglia/rrds/hdcluster/hadoopmaster/metricssystem.MetricsSystem.publish_max_time.rrd
> > > > > > > Segmentation fault
> > > > > > >
> > > > > > > And some info from the apache log <
> http://pastebin.com/nrqKRtKJ
> > >..
> > > > > > >
> > > > > > > Can someone suggest a ganglia version that is tested with
> hadoop
> > > > > > 0.20.205?
> > > > > > > I will try to sort it out however it seems a not so tribial
> > > problem..
> > > > > > >
> > > > > > > Thank you
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 2 December 2011 12:32, praveenesh kumar <
> praveenesh@gmail.com
> > >
> > > > > wrote:
> > > > > > >
> > > > > > >> or Do I have to apply some hadoop patch for this ?
> > > > > > >>
> > > > > > >> Thanks,
> > > > > > >> Praveenesh
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message