geronimo-scm mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From d...@apache.org
Subject svn commit: r233044 [5/33] - in /geronimo/trunk/sandbox/eclipse-plugin: ./ org.apache.geronimo.core/ org.apache.geronimo.core/META-INF/ org.apache.geronimo.core/serverdef/ org.apache.geronimo.core/src/ org.apache.geronimo.core/src/org/ org.apache.geron...
Date Tue, 16 Aug 2005 19:47:05 GMT
Added: geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_0.dtd
URL: http://svn.apache.org/viewcvs/geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_0.dtd?rev=233044&view=auto
==============================================================================
--- geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_0.dtd (added)
+++ geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_0.dtd Tue Aug 16 12:46:27 2005
@@ -0,0 +1,557 @@
+<!--
+Copyright 2000-2001 Sun Microsystems, Inc. 901 San Antonio Road,
+Palo Alto, CA  94303, U.S.A.  All rights reserved.
+
+This product or document is protected by copyright and distributed
+under licenses restricting its use, copying, distribution, and
+decompilation.  No part of this product or documentation may be
+reproduced in any form by any means without prior written authorization
+of Sun and its licensors, if any.
+
+Third party software, including font technology, is copyrighted and
+licensed from Sun suppliers.
+
+Sun, Sun Microsystems, the Sun Logo, Solaris, Java, JavaServer Pages, Java
+Naming and Directory Interface, JDBC, JDK, JavaMail and Enterprise JavaBeans,
+are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S.
+and other countries.
+
+All SPARC trademarks are used under license and are trademarks
+or registered trademarks of SPARC International, Inc.
+in the U.S. and other countries. Products bearing SPARC
+trademarks are based upon an architecture developed by Sun Microsystems, Inc.
+
+PostScript is a registered trademark of Adobe Systems, Inc.
+
+Federal Acquisitions: Commercial Software - Government Users Subject to
+Standard License Terms and Conditions.
+
+DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
+CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
+IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT
+TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
+INVALID.
+
+_________________________________________________________________________
+
+Copyright 2000-2001 Sun Microsystems, Inc.,
+901 San Antonio Road, Palo Alto, CA  94303, Etats-Unis.
+Tous droits re'serve's.
+
+
+Ce produit ou document est prote'ge' par un copyright et distribue' avec
+des licences qui en restreignent l'utilisation, la copie, la distribution,
+et la de'compilation.  Aucune partie de ce produit ou de sa documentation
+associe'e ne peut e^tre reproduite sous aucune forme, par quelque moyen
+que ce soit, sans l'autorisation pre'alable et e'crite de Sun et de ses
+bailleurs de licence, s'il y en a.
+
+Le logiciel de'tenu par des tiers, et qui comprend la technologie
+relative aux polices de caracte`res, est prote'ge' par un copyright
+et licencie' par des fournisseurs de Sun.
+
+Sun, Sun Microsystems, le logo Sun, Solaris, Java, JavaServer Pages, Java
+Naming and Directory Interface, JDBC, JDK, JavaMail, et Enterprise JavaBeans,
+sont des marques de fabrique ou des marques de'pose'es de Sun
+Microsystems, Inc. aux Etats-Unis et dans d'autres pays.
+
+Toutes les marques SPARC sont utilise'es sous licence et sont
+des marques de fabrique ou des marques de'pose'es de SPARC
+International, Inc. aux Etats-Unis et  dans
+d'autres pays. Les produits portant les marques SPARC sont
+base's sur une architecture de'veloppe'e par Sun Microsystems, Inc.
+
+Postcript est une marque enregistre'e d'Adobe Systems Inc.
+
+LA DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTES AUTRES CONDITIONS,
+DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES,
+DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
+TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE
+A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.
+-->
+
+<!--
+This is the XML DTD for the Connector 1.0 deployment descriptor.
+All Connector 1.0 deployment descriptors must include a DOCTYPE
+of the following form:
+
+  <!DOCTYPE connector PUBLIC
+	"-//Sun Microsystems, Inc.//DTD Connector 1.0//EN"
+	"http://java.sun.com/dtd/connector_1_0.dtd">
+
+-->
+
+<!--
+The following conventions apply to all J2EE deployment descriptor
+elements unless indicated otherwise.
+
+- In elements that contain PCDATA, leading and trailing whitespace
+  in the data may be ignored.
+
+- In elements whose value is an "enumerated type", the value is
+  case sensitive.
+
+- In elements that specify a pathname to a file within the same
+  JAR file, relative filenames (i.e., those not starting with "/")
+  are considered relative to the root of the JAR file's namespace.
+  Absolute filenames (i.e., those starting with "/") also specify
+  names in the root of the JAR file's namespace.  In general, relative
+  names are preferred.  The exception is .war files where absolute
+  names are preferred for consistency with the servlet API.
+-->
+
+
+<!--
+The connector element is the root element of the deployment descriptor
+for the resource adapter. This element includes general information - vendor
+name, version, specification version supported, icon -  about the
+resource adapter module. It also includes information specific to the
+implementation of the resource adapter library as specified through
+the element resourceadapter.
+-->
+<!ELEMENT connector (display-name?, description?, icon?, vendor-name,
+spec-version, eis-type, version, license?, resourceadapter)>
+
+<!--
+The element authentication-mechanism specifies an authentication mechanism
+supported by the resource adapter. Note that this support is for
+the resource adapter and not for the underlying EIS instance. The
+optional description specifies any resource adapter specific requirement
+for the support of security contract and authentication mechanism.
+
+Note that BasicPassword mechanism type should support the
+javax.resource.spi.security.PasswordCredential interface.
+The Kerbv5 mechanism type should support the
+javax.resource.spi.security.GenericCredential interface.
+
+Used in: resourceadapter
+-->
+<!ELEMENT authentication-mechanism (
+description?, authentication-mechanism-type, credential-interface)>
+
+<!--
+The element authentication-mechanism-type specifies type of an authentication
+mechanism.
+
+The example values are:
+   <authentication-mechanism-type>BasicPassword
+                   </authentication-mechanism-type>
+   <authentication-mechanism-type>Kerbv5
+                   </authentication-mechanism-type>
+
+Any additional security mechanisms are outside the scope of the
+Connector architecture specification.
+
+Used in: authentication-mechanism
+-->
+<!ELEMENT authentication-mechanism-type (#PCDATA)>
+
+<!--
+The element config-property contains a declaration of a single
+configuration property for a ManagedConnectionFactory instance.
+
+Each ManagedConnectionFactory instance creates connections to a
+specific EIS instance based on the properties configured on the
+ManagedConnectionFactory instance. The configurable properties are
+specified only once in the deployment descriptor, even though a
+resource adapter can be used to configure multiple ManagedConnnection-
+Factory instances (that create connections to different instances of
+the same EIS).
+
+The declaration consists of an optional description, name, type
+and an optional value of the configuration property. If the resource
+adapter provider does not specify a value than the deployer is
+responsible for providing a valid value for a configuration property.
+
+Any bounds or well-defined values of properties should be described
+in the description element.
+
+Used in: resourceadapter
+-->
+<!ELEMENT config-property (description?, config-property-name,
+config-property-type, config-property-value?)>
+
+<!--
+The element config-property-name contains the name of a configuration
+property.
+
+The connector architecture defines a set of well-defined properties
+all of type java.lang.String. These are as follows:
+     <config-property-name>ServerName</config-property-name>
+     <config-property-name>PortNumber</config-property-name>
+     <config-property-name>UserName</config-property-name>
+     <config-property-name>Password</config-property-name>
+     <config-property-name>ConnectionURL</config-property-name>
+
+A resource adapter provider can extend this property set to include
+properties specific to the resource adapter and its underlying EIS.
+
+Used in: config-property
+
+Example: <config-property-name>ServerName</config-property-name>
+-->
+<!ELEMENT config-property-name (#PCDATA)>
+
+<!--
+The element config-property-type contains the fully qualified Java
+type of a configuration property as required by ManagedConnection-
+Factory instance.
+
+The following are the legal values of config-property-type:
+   java.lang.Boolean, java.lang.String, java.lang.Integer,
+   java.lang.Double, java.lang.Byte, java.lang.Short,
+   java.lang.Long, java.lang.Float, java.lang.Character
+
+Used in: config-property
+
+Example: <config-property-type>java.lang.String</config-property-type>
+-->
+<!ELEMENT config-property-type (#PCDATA)>
+
+<!--
+The element config-property-value contains the value of a configuration
+entry.
+
+Used in: config-property
+
+Example: <config-property-value>WombatServer</config-property-value>
+-->
+<!ELEMENT config-property-value (#PCDATA)>
+
+<!--
+The element connection-impl-class specifies the fully-qualified
+name of the Connection class that implements resource adapter
+specific Connection interface.
+
+Used in: resourceadapter
+
+Example: <connection-impl-class>com.wombat.ConnectionImpl
+         </connection-impl-class>
+-->
+<!ELEMENT connection-impl-class (#PCDATA)>
+
+<!--
+The element connection-interface specifies the fully-qualified
+name of the Connection interface supported by the resource
+adapter.
+
+Used in: resourceadapter
+
+Example: <connection-interface>javax.resource.cci.Connection
+         </connection-interface>
+-->
+<!ELEMENT connection-interface (#PCDATA)>
+
+<!--
+The element connectionfactory-impl-class specifies the fully-qualified
+name of the ConnectionFactory class that implements resource adapter
+specific ConnectionFactory interface.
+
+Used in: resourceadapter
+
+Example: <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
+         </connectionfactory-impl-class>
+-->
+<!ELEMENT connectionfactory-impl-class (#PCDATA)>
+
+<!--
+The element connectionfactory-interface specifies the fully-qualified
+name of the ConnectionFactory interface supported by the resource
+adapter.
+
+Used in: resourceadapter
+
+Example: <connectionfactory-interface>com.wombat.ConnectionFactory
+         </connectionfactory-interface>
+OR
+<connectionfactory-interface>javax.resource.cci.ConnectionFactory
+         </connectionfactory-interface>
+-->
+<!ELEMENT connectionfactory-interface (#PCDATA)>
+
+<!--
+The element credential-interface specifies the interface that the
+resource adapter implementation supports for the representation
+of the credentials. This element should be used by application server
+to find out the Credential interface it should use as part of the
+security contract.
+
+The possible values are:
+   <credential-interface>javax.resource.spi.security.PasswordCredential
+        </credential-interface>
+   <credential-interface>javax.resource.spi.security.GenericCredential
+        </credential-interface>
+
+Used in: authentication-mechanism
+-->
+<!ELEMENT credential-interface (#PCDATA)>
+
+<!--
+The description element is used to provide text describing the parent
+element.  The description element should include any information that
+the resource adapter rar file producer wants to provide to the consumer of
+the resource adapter rar file (i.e., to the Deployer). Typically, the tools
+used by the resource adapter rar file consumer will display the description
+when processing the parent element that contains the description.
+
+Used in: authentication-mechanism, config-property, connector, license,
+security-permission
+-->
+<!ELEMENT description (#PCDATA)>
+
+<!--
+The display-name element contains a short name that is intended to be
+displayed by tools.  The display name need not be unique.
+
+Used in: connector
+
+Example:
+
+<display-name>Employee Self Service</display-name>
+-->
+<!ELEMENT display-name (#PCDATA)>
+
+<!--
+The element eis-type contains information about the type of the
+EIS. For example, the type of an EIS can be product name of EIS
+independent of any version info.
+
+This helps in identifying EIS instances that can be used with
+this resource adapter.
+
+Used in: connector
+-->
+<!ELEMENT eis-type (#PCDATA)>
+
+<!--
+The icon element contains small-icon and large-icon elements that
+specify the file names for small and a large GIF or JPEG icon images
+used to represent the parent element in a GUI tool.
+
+Used in: connector
+-->
+<!ELEMENT icon (small-icon?, large-icon?)>
+
+<!--
+The large-icon element contains the name of a file
+containing a large (32 x 32) icon image. The file
+name is a relative path within the resource adapter's
+rar file.
+
+The image may be either in the JPEG or GIF format.
+The icon can be used by tools.
+
+Used in: icon
+
+Example:
+
+<large-icon>employee-service-icon32x32.jpg</large-icon>
+-->
+<!ELEMENT large-icon (#PCDATA)>
+
+<!--
+The element license specifies licensing requirements for the resource
+adapter module. This element specifies whether a license is required
+to deploy and use this resource adapter, and an optional description
+of the licensing terms (examples: duration of license, number of
+connection restrictions).
+
+Used in: connector
+-->
+<!ELEMENT license (description?, license-required)>
+
+<!--
+The element license-required specifies whether a license is required
+to deploy and use the resource adapter. This element must be one of
+the following:
+
+	<license-required>true</license-required>
+	<license-required>false</license-required>
+
+Used in: license
+-->
+<!ELEMENT license-required (#PCDATA)>
+
+<!--
+The element managedconnectionfactory-class specifies the fully qualified
+name of the Java class that implements the javax.resource.spi.Managed-
+ConnectionFactory interface. This Java class is provided as part of
+resource adapter's implementation of connector architecture specified
+contracts.
+
+Used in: resourceadapter
+
+Example:
+  <managedconnectionfactory-class>com.wombat.ManagedConnectionFactoryImpl
+  </managedconnectionfactory-class>
+-->
+<!ELEMENT managedconnectionfactory-class (#PCDATA)>
+
+<!--
+The element reauthentication-support specifies whether the resource
+adapter implementation supports re-authentication of existing Managed-
+Connection instance. Note that this information is for the resource
+adapter implementation and not for the underlying EIS instance.
+
+This element must be one of the following:
+        <reauthentication-support>true</reauthentication-support>
+        <reauthentication-support>false</reauthentication-support>
+Used in: resourceadapter
+-->
+<!ELEMENT reauthentication-support (#PCDATA)>
+
+<!--
+The element resourceadapter specifies information about the resource
+adapter. The information includes fully-qualified names of
+class/interfaces required as part of the connector architecture
+specified contracts, level of transaction support provided,
+configurable properties for ManagedConnectionFactory instances,
+one or more authentication mechanisms supported and additional
+required security permissions.
+
+If there is no authentication-mechanism specified as part of
+resource adapter element then the resource adapter does not
+support any standard security authentication mechanisms as part
+of security contract. The application server ignores the security
+part of the system contracts in this case.
+
+Used in: connector
+-->
+<!ELEMENT resourceadapter (
+managedconnectionfactory-class, connectionfactory-interface,
+connectionfactory-impl-class, connection-interface,
+connection-impl-class, transaction-support, config-property*,
+authentication-mechanism*, reauthentication-support, security-permission*
+)>
+
+<!--
+The element security permission specifies a security permission that
+is required by the resource adapter code.
+
+The security permission listed in the deployment descriptor are ones
+that are different from those required by the default permission set
+as specified in the connector specification. The optional description
+can mention specific reason that resource adapter requires a given
+security permission.
+
+Used in: resourceadapter
+-->
+<!ELEMENT security-permission (description?, security-permission-spec)>
+
+<!--
+The element permission-spec specifies a security permission based
+on the Security policy file syntax. Refer to the following URL for
+Sun's implementation of the security permission specification:
+
+http:
+
+Used in: security-permission
+-->
+<!ELEMENT security-permission-spec (#PCDATA)>
+
+<!--
+The small-icon element contains the name of a file
+containing a small (16 x 16) icon image. The file
+name is a relative path within the resource adapter's
+rar file.
+
+The image may be either in the JPEG or GIF format.
+The icon can be used by tools.
+
+Used in: icon
+
+Example:
+
+<small-icon>employee-service-icon16x16.jpg</small-icon>
+-->
+<!ELEMENT small-icon (#PCDATA)>
+
+<!--
+The element spec-version specifies the version of the connector
+architecture specification that is supported by this resource
+adapter. This information enables deployer to configure the resource
+adapter to support deployment and runtime requirements of the
+corresponding connector architecture specification.
+
+Used in: connector
+
+Example:
+  <spec-version>1.0</spec-version>
+-->
+<!ELEMENT spec-version (#PCDATA)>
+
+<!--
+The transaction-support element specifies the level of transaction
+support provided by the resource adapter.
+The value of transaction-support must be one of the following:
+ <transaction-support>NoTransaction</transaction-support>
+ <transaction-support>LocalTransaction</transaction-support>
+ <transaction-support>XATransaction</transaction-support>
+
+Used in: resourceadapter
+-->
+<!ELEMENT transaction-support (#PCDATA)>
+
+<!--
+The element vendor-name specifies the name of resource adapter provider
+vendor.
+
+Used in: connector
+
+Example:
+  <vendor-name>Wombat Corp.</vendor-name>
+-->
+<!ELEMENT vendor-name (#PCDATA)>
+
+<!--
+The element version specifies a string-based version of the
+resource adapter from the resource adapter provider.
+
+Used in: connector
+
+Example:
+  <version>1.0</version>
+-->
+<!ELEMENT version (#PCDATA)>
+
+<!--
+The ID mechanism is to allow tools that produce additional deployment
+information (i.e., information beyond the standard deployment
+descriptor information) to store the non-standard information in a
+separate file, and easily refer from these tool-specific files to the
+information in the standard deployment descriptor.
+
+Tools are not allowed to add the non-standard information into the
+standard deployment descriptor.
+-->
+
+<!ATTLIST authentication-mechanism id ID #IMPLIED>
+<!ATTLIST authentication-mechanism-type id ID #IMPLIED>
+<!ATTLIST config-property id ID #IMPLIED>
+<!ATTLIST config-property-name id ID #IMPLIED>
+<!ATTLIST config-property-type id ID #IMPLIED>
+<!ATTLIST config-property-value id ID #IMPLIED>
+<!ATTLIST connection-impl-class id ID #IMPLIED>
+<!ATTLIST connection-interface id ID #IMPLIED>
+<!ATTLIST connectionfactory-impl-class id ID #IMPLIED>
+<!ATTLIST connectionfactory-interface id ID #IMPLIED>
+<!ATTLIST connector id ID #IMPLIED>
+<!ATTLIST credential-interface id ID #IMPLIED>
+<!ATTLIST description id ID #IMPLIED>
+<!ATTLIST display-name id ID #IMPLIED>
+<!ATTLIST eis-type id ID #IMPLIED>
+<!ATTLIST icon id ID #IMPLIED>
+<!ATTLIST large-icon id ID #IMPLIED>
+<!ATTLIST license id ID #IMPLIED>
+<!ATTLIST license-required id ID #IMPLIED>
+<!ATTLIST managedconnectionfactory-class id ID #IMPLIED>
+<!ATTLIST reauthentication-support id ID #IMPLIED>
+<!ATTLIST resourceadapter id ID #IMPLIED>
+<!ATTLIST security-permission id ID #IMPLIED>
+<!ATTLIST security-permission-spec id ID #IMPLIED>
+<!ATTLIST small-icon id ID #IMPLIED>
+<!ATTLIST spec-version id ID #IMPLIED>
+<!ATTLIST transaction-support id ID #IMPLIED>
+<!ATTLIST vendor-name id ID #IMPLIED>
+<!ATTLIST version id ID #IMPLIED>

Propchange: geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_0.dtd
------------------------------------------------------------------------------
    svn:executable = *

Added: geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_5.xsd
URL: http://svn.apache.org/viewcvs/geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_5.xsd?rev=233044&view=auto
==============================================================================
--- geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_5.xsd (added)
+++ geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_5.xsd Tue Aug 16 12:46:27 2005
@@ -0,0 +1,1035 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
+	    targetNamespace="http://java.sun.com/xml/ns/j2ee"
+	    xmlns:j2ee="http://java.sun.com/xml/ns/j2ee"
+	    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
+	    elementFormDefault="qualified"
+	    attributeFormDefault="unqualified"
+	    version="1.5">
+  <xsd:annotation>
+    <xsd:documentation>
+      @(#)connector_1_5.xsds	1.27 06/17/03
+    </xsd:documentation>
+  </xsd:annotation>
+
+  <xsd:annotation>
+    <xsd:documentation>
+
+      Copyright 2003 Sun Microsystems, Inc., 901 San Antonio
+      Road, Palo Alto, California 94303, U.S.A. All rights
+      reserved.
+
+      Sun Microsystems, Inc. has intellectual property rights
+      relating to technology described in this document. In
+      particular, and without limitation, these intellectual
+      property rights may include one or more of the U.S. patents
+      listed at http://www.sun.com/patents and one or more
+      additional patents or pending patent applications in the
+      U.S. and other countries.
+
+      This document and the technology which it describes are
+      distributed under licenses restricting their use, copying,
+      distribution, and decompilation. No part of this document
+      may be reproduced in any form by any means without prior
+      written authorization of Sun and its licensors, if any.
+
+      Third-party software, including font technology, is
+      copyrighted and licensed from Sun suppliers.
+
+      Sun, Sun Microsystems, the Sun logo, Solaris, Java, J2EE,
+      JavaServer Pages, Enterprise JavaBeans and the Java Coffee
+      Cup logo are trademarks or registered trademarks of Sun
+      Microsystems, Inc. in the U.S. and other countries.
+
+      Federal Acquisitions: Commercial Software - Government Users
+      Subject to Standard License Terms and Conditions.
+
+    </xsd:documentation>
+  </xsd:annotation>
+
+  <xsd:annotation>
+    <xsd:documentation>
+      <![CDATA[
+
+	This is the XML Schema for the Connector 1.5 deployment
+	descriptor.  The deployment descriptor must be named
+	"META-INF/ra.xml" in the connector's rar file.  All Connector
+	deployment descriptors must indicate the connector resource
+	adapter schema by using the J2EE namespace:
+
+	http://java.sun.com/xml/ns/j2ee
+
+	and by indicating the version of the schema by
+	using the version element as shown below:
+
+	    <connector xmlns="http://java.sun.com/xml/ns/j2ee"
+	      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+	      xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
+		 http://java.sun.com/xml/ns/j2ee/connector_1_5.xsd"
+	      version="1.5">
+	      ...
+	    </connector>
+
+	The instance documents may indicate the published version of
+	the schema using the xsi:schemaLocation attribute for J2EE
+	namespace with the following location:
+
+	http://java.sun.com/xml/ns/j2ee/connector_1_5.xsd
+
+	]]>
+    </xsd:documentation>
+  </xsd:annotation>
+
+  <xsd:annotation>
+    <xsd:documentation>
+
+      The following conventions apply to all J2EE
+      deployment descriptor elements unless indicated otherwise.
+
+      - In elements that specify a pathname to a file within the
+	same JAR file, relative filenames (i.e., those not
+	starting with "/") are considered relative to the root of
+	the JAR file's namespace.  Absolute filenames (i.e., those
+	starting with "/") also specify names in the root of the
+	JAR file's namespace.  In general, relative names are
+	preferred.  The exception is .war files where absolute
+	names are preferred for consistency with the Servlet API.
+
+    </xsd:documentation>
+  </xsd:annotation>
+
+  <xsd:include schemaLocation="j2ee_1_4.xsd"/>
+
+
+<!-- **************************************************** -->
+
+
+  <xsd:element name="connector" type="j2ee:connectorType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The connector element is the root element of the deployment
+	descriptor for the resource adapter. This element includes
+	general information - vendor name, resource adapter version,
+	icon - about the resource adapter module. It also includes
+	information specific to the implementation of the resource
+	adapter library as specified through the element
+	resourceadapter.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+  </xsd:element>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="activationspecType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The activationspecType specifies an activation
+	specification.  The information includes fully qualified
+	Java class name of an activation specification and a set of
+	required configuration property names.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="activationspec-class"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element activationspec-class specifies the fully
+	      qualified Java class name of the activation
+	      specification class. This class must implement the
+	      javax.resource.spi.ActivationSpec interface. The
+	      implementation of this class is required to be a
+	      JavaBean.
+
+	      Example:
+		  <activationspec-class>com.wombat.ActivationSpecImpl
+		  </activationspec-class>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="required-config-property"
+		   type="j2ee:required-config-propertyType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="adminobjectType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The adminobjectType specifies information about an
+	administered object.  Administered objects are specific to a
+	messaging style or message provider.  This contains
+	information on the Java type of the interface implemented by
+	an administered object, its Java class name and its
+	configuration properties.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="adminobject-interface"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element adminobject-interface specifies the
+	      fully qualified name of the Java type of the
+	      interface implemented by an administered object.
+
+	      Example:
+		<adminobject-interface>javax.jms.Destination
+		</adminobject-interface>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+      <xsd:element name="adminobject-class"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element adminobject-class specifies the fully
+	      qualified Java class name of an administered object.
+
+	      Example:
+		  <adminobject-class>com.wombat.DestinationImpl
+		  </adminobject-class>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+
+      <xsd:element name="config-property"
+		   type="j2ee:config-propertyType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="authentication-mechanismType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The authentication-mechanismType specifies an authentication
+	mechanism supported by the resource adapter. Note that this
+	support is for the resource adapter and not for the
+	underlying EIS instance. The optional description specifies
+	any resource adapter specific requirement for the support of
+	security contract and authentication mechanism.
+
+	Note that BasicPassword mechanism type should support the
+	javax.resource.spi.security.PasswordCredential interface.
+	The Kerbv5 mechanism type should support the
+	org.ietf.jgss.GSSCredential interface or the deprecated
+	javax.resource.spi.security.GenericCredential interface.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="description"
+		   type="j2ee:descriptionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="authentication-mechanism-type"
+		   type="j2ee:xsdStringType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element authentication-mechanism-type specifies
+	      type of an authentication mechanism.
+
+	      The example values are:
+
+	      <authentication-mechanism-type>BasicPassword
+	      </authentication-mechanism-type>
+
+	      <authentication-mechanism-type>Kerbv5
+	      </authentication-mechanism-type>
+
+	      Any additional security mechanisms are outside the
+	      scope of the Connector architecture specification.
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+      <xsd:element name="credential-interface"
+		   type="j2ee:credential-interfaceType"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="config-property-nameType">
+    <xsd:annotation>
+      <xsd:documentation>
+	<![CDATA[
+
+	  The config-property-nameType contains the name of a
+	  configuration property.
+
+	  The connector architecture defines a set of well-defined
+	  properties all of type java.lang.String. These are as
+	  follows.
+
+	       ServerName
+	       PortNumber
+	       UserName
+	       Password
+	       ConnectionURL
+
+	  A resource adapter provider can extend this property set to
+	  include properties specific to the resource adapter and its
+	  underlying EIS.
+
+	  Possible values include
+		  ServerName
+		  PortNumber
+		  UserName
+		  Password
+		  ConnectionURL
+
+	  Example: <config-property-name>ServerName</config-property-name>
+
+	  ]]>
+      </xsd:documentation>
+    </xsd:annotation>
+    <xsd:simpleContent>
+      <xsd:restriction base="j2ee:xsdStringType"/>
+    </xsd:simpleContent>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="config-property-typeType">
+    <xsd:annotation>
+      <xsd:documentation>
+	<![CDATA[
+
+	  The config-property-typeType contains the fully
+	  qualified Java type of a configuration property.
+
+	  The following are the legal values:
+	     java.lang.Boolean, java.lang.String, java.lang.Integer,
+	     java.lang.Double, java.lang.Byte, java.lang.Short,
+	     java.lang.Long, java.lang.Float, java.lang.Character
+
+	  Used in: config-property
+
+	  Example:
+	  <config-property-type>java.lang.String</config-property-type>
+
+	  ]]>
+      </xsd:documentation>
+    </xsd:annotation>
+    <xsd:simpleContent>
+      <xsd:restriction base="j2ee:string">
+	<xsd:enumeration value="java.lang.Boolean"/>
+	<xsd:enumeration value="java.lang.String"/>
+	<xsd:enumeration value="java.lang.Integer"/>
+	<xsd:enumeration value="java.lang.Double"/>
+	<xsd:enumeration value="java.lang.Byte"/>
+	<xsd:enumeration value="java.lang.Short"/>
+	<xsd:enumeration value="java.lang.Long"/>
+	<xsd:enumeration value="java.lang.Float"/>
+	<xsd:enumeration value="java.lang.Character"/>
+      </xsd:restriction>
+    </xsd:simpleContent>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="config-propertyType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The config-propertyType contains a declaration of a single
+	configuration property that may be used for providing
+	configuration information.
+
+	The declaration consists of an optional description, name,
+	type and an optional value of the configuration property. If
+	the resource adapter provider does not specify a value than
+	the deployer is responsible for providing a valid value for
+	a configuration property.
+
+	Any bounds or well-defined values of properties should be
+	described in the description element.
+
+      </xsd:documentation>
+    </xsd:annotation>
+    <xsd:sequence>
+      <xsd:element name="description"
+		   type="j2ee:descriptionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="config-property-name"
+		   type="j2ee:config-property-nameType"/>
+      <xsd:element name="config-property-type"
+		   type="j2ee:config-property-typeType"/>
+      <xsd:element name="config-property-value"
+		   type="j2ee:xsdStringType"
+		   minOccurs="0">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element config-property-value contains the value
+	      of a configuration entry. Note, it is possible for a
+	      resource adapter deployer to override this
+	      configuration information during deployment.
+
+	      Example:
+	      <config-property-value>WombatServer</config-property-value>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="connection-definitionType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The connection-definitionType defines a set of connection
+	interfaces and classes pertaining to a particular connection
+	type. This also includes configurable properties for
+	ManagedConnectionFactory instances that may be produced out
+	of this set.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="managedconnectionfactory-class"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element managedconnectionfactory-class specifies
+	      the fully qualified name of the Java class that
+	      implements the
+	      javax.resource.spi.ManagedConnectionFactory interface.
+	      This Java class is provided as part of resource
+	      adapter's implementation of connector architecture
+	      specified contracts. The implementation of this
+	      class is required to be a JavaBean.
+
+	      Example:
+	      <managedconnectionfactory-class>
+		  com.wombat.ManagedConnectionFactoryImpl
+	      </managedconnectionfactory-class>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="config-property"
+		   type="j2ee:config-propertyType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="connectionfactory-interface"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element connectionfactory-interface specifies
+	      the fully qualified name of the ConnectionFactory
+	      interface supported by the resource adapter.
+
+	      Example:
+	      <connectionfactory-interface>com.wombat.ConnectionFactory
+	      </connectionfactory-interface>
+
+	      OR
+
+	      <connectionfactory-interface>javax.resource.cci.ConnectionFactory
+	      </connectionfactory-interface>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+
+      <xsd:element name="connectionfactory-impl-class"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element connectionfactory-impl-class specifies
+	      the fully qualified name of the ConnectionFactory
+	      class that implements resource adapter
+	      specific ConnectionFactory interface.
+
+	      Example:
+
+	      <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
+	      </connectionfactory-impl-class>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="connection-interface"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The connection-interface element specifies the fully
+	      qualified name of the Connection interface supported
+	      by the resource adapter.
+
+	      Example:
+
+		  <connection-interface>javax.resource.cci.Connection
+		  </connection-interface>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="connection-impl-class"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The connection-impl-classType specifies the fully
+	      qualified name of the Connection class that
+	      implements resource adapter specific Connection
+	      interface.  It is used by the connection-impl-class
+	      elements.
+
+	      Example:
+
+		  <connection-impl-class>com.wombat.ConnectionImpl
+		  </connection-impl-class>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="connectorType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The connectorType defines a resource adapter.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:group ref="j2ee:descriptionGroup"/>
+      <xsd:element name="vendor-name"
+		   type="j2ee:xsdStringType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element vendor-name specifies the name of
+	    resource adapter provider vendor.
+
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="eis-type"
+		   type="j2ee:xsdStringType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element eis-type contains information about the
+	    type of the EIS. For example, the type of an EIS can
+	    be product name of EIS independent of any version
+	    info.
+
+	    This helps in identifying EIS instances that can be
+	    used with this resource adapter.
+
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+      <xsd:element name="resourceadapter-version"
+		   type="j2ee:xsdStringType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element resourceadapter-version specifies a string-based version
+	    of the resource adapter from the resource adapter
+	    provider.
+
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+      <xsd:element name="license"
+		   type="j2ee:licenseType"
+		   minOccurs="0"/>
+      <xsd:element name="resourceadapter"
+		   type="j2ee:resourceadapterType"/>
+
+    </xsd:sequence>
+    <xsd:attribute name="version"
+		   type="j2ee:dewey-versionType"
+		   fixed="1.5"
+		   use="required">
+      <xsd:annotation>
+	<xsd:documentation>
+
+	  The version specifies the version of the
+	  connector architecture specification that is
+	  supported by this resource adapter. This information
+	  enables deployer to configure the resource adapter to
+	  support deployment and runtime requirements of the
+	  corresponding connector architecture specification.
+
+	</xsd:documentation>
+      </xsd:annotation>
+    </xsd:attribute>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="credential-interfaceType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The credential-interfaceType specifies the
+	interface that the resource adapter implementation
+	supports for the representation of the
+	credentials. This element(s) that use this type,
+	i.e. credential-interface,  should be used by
+	application server to find out the Credential
+	interface it should use as part of the security
+	contract.
+
+	The possible values are:
+
+	javax.resource.spi.security.PasswordCredential
+	org.ietf.jgss.GSSCredential
+	javax.resource.spi.security.GenericCredential
+
+      </xsd:documentation>
+    </xsd:annotation>
+    <xsd:simpleContent>
+      <xsd:restriction base="j2ee:fully-qualified-classType">
+	<xsd:enumeration
+	     value="javax.resource.spi.security.PasswordCredential"/>
+	<xsd:enumeration
+	     value="org.ietf.jgss.GSSCredential"/>
+	<xsd:enumeration
+	     value="javax.resource.spi.security.GenericCredential"/>
+      </xsd:restriction>
+    </xsd:simpleContent>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="inbound-resourceadapterType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The inbound-resourceadapterType specifies information
+	about an inbound resource adapter. This contains information
+	specific to the implementation of the resource adapter
+	library as specified through the messageadapter element.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="messageadapter"
+		   type="j2ee:messageadapterType"
+		   minOccurs="0">
+	<xsd:unique name="messagelistener-type-uniqueness">
+	  <xsd:annotation>
+	    <xsd:documentation>
+
+	      The messagelistener-type element content must be
+	      unique in the messageadapter. Several messagelisteners
+	      can not use the same messagelistener-type.
+
+	    </xsd:documentation>
+	  </xsd:annotation>
+	  <xsd:selector xpath="j2ee:messagelistener"/>
+	  <xsd:field    xpath="j2ee:messagelistener-type"/>
+	</xsd:unique>
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="licenseType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The licenseType specifies licensing requirements for the
+	resource adapter module. This type specifies whether a
+	license is required to deploy and use this resource adapter,
+	and an optional description of the licensing terms
+	(examples: duration of license, number of connection
+	restrictions). It is used by the license element.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="description"
+		   type="j2ee:descriptionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="license-required"
+		   type="j2ee:true-falseType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element license-required specifies whether a
+	    license is required to deploy and use the
+	    resource adapter. This element must be one of
+	    the following, "true" or "false".
+
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="messageadapterType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The messageadapterType specifies information about the
+	messaging capabilities of the resource adapter. This
+	contains information specific to the implementation of the
+	resource adapter library as specified through the
+	messagelistener element.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="messagelistener"
+		   type="j2ee:messagelistenerType"
+		   maxOccurs="unbounded"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="messagelistenerType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The messagelistenerType specifies information about a
+	specific message listener supported by the messaging
+	resource adapter. It contains information on the Java type
+	of the message listener interface and an activation
+	specification.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="messagelistener-type"
+		   type="j2ee:fully-qualified-classType">
+	<xsd:annotation>
+	  <xsd:documentation>
+	    <![CDATA[
+
+	      The element messagelistener-type specifies the fully
+	      qualified name of the Java type of a message
+	      listener interface.
+
+	      Example:
+
+		<messagelistener-type>javax.jms.MessageListener
+		</messagelistener-type>
+
+	      ]]>
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+      <xsd:element name="activationspec"
+		   type="j2ee:activationspecType"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="outbound-resourceadapterType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The outbound-resourceadapterType specifies information about
+	an outbound resource adapter. The information includes fully
+	qualified names of classes/interfaces required as part of
+	the connector architecture specified contracts for
+	connection management, level of transaction support
+	provided, one or more authentication mechanisms supported
+	and additional required security permissions.
+
+	If there is no authentication-mechanism specified as part of
+	resource adapter element then the resource adapter does not
+	support any standard security authentication mechanisms as
+	part of security contract. The application server ignores
+	the security part of the system contracts in this case.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="connection-definition"
+		   type="j2ee:connection-definitionType"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="transaction-support"
+		   type="j2ee:transaction-supportType"/>
+      <xsd:element name="authentication-mechanism"
+		   type="j2ee:authentication-mechanismType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="reauthentication-support"
+		   type="j2ee:true-falseType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element reauthentication-support specifies
+	    whether the resource adapter implementation supports
+	    re-authentication of existing Managed- Connection
+	    instance. Note that this information is for the
+	    resource adapter implementation and not for the
+	    underlying EIS instance. This element must have
+	    either a "true" or "false" value.
+
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="required-config-propertyType">
+    <xsd:annotation>
+      <xsd:documentation>
+	<![CDATA[
+
+	  The required-config-propertyType contains a declaration
+	  of a single configuration property used for specifying a
+	  required configuration property name. It is used
+	  by required-config-property elements.
+
+	  Example:
+
+	  <required-config-property>Destination</required-config-property>
+
+	  ]]>
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="description"
+		   type="j2ee:descriptionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="config-property-name"
+		   type="j2ee:config-property-nameType"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="resourceadapterType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The resourceadapterType specifies information about the
+	resource adapter. The information includes fully qualified
+	resource adapter Java class name, configuration properties,
+	information specific to the implementation of the resource
+	adapter library as specified through the
+	outbound-resourceadapter and inbound-resourceadapter
+	elements, and an optional set of administered objects.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="resourceadapter-class"
+		   type="j2ee:fully-qualified-classType"
+		   minOccurs="0">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element resourceadapter-class specifies the
+	    fully qualified name of a Java class that implements
+	    the javax.resource.spi.ResourceAdapter
+	    interface. This Java class is provided as part of
+	    resource adapter's implementation of connector
+	    architecture specified contracts. The implementation
+	    of this class is required to be a JavaBean.
+
+	  </xsd:documentation>
+	</xsd:annotation>
+
+      </xsd:element>
+      <xsd:element name="config-property"
+		   type="j2ee:config-propertyType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="outbound-resourceadapter"
+		   type="j2ee:outbound-resourceadapterType"
+		   minOccurs="0">
+	<xsd:unique name="connectionfactory-interface-uniqueness">
+	  <xsd:annotation>
+	    <xsd:documentation>
+
+	      The connectionfactory-interface element content
+	      must be unique in the outbound-resourceadapter.
+	      Multiple connection-definitions can not use the
+	      same connectionfactory-type.
+
+	    </xsd:documentation>
+	  </xsd:annotation>
+	  <xsd:selector xpath="j2ee:connection-definition"/>
+	  <xsd:field    xpath="j2ee:connectionfactory-interface"/>
+	</xsd:unique>
+      </xsd:element>
+      <xsd:element name="inbound-resourceadapter"
+		   type="j2ee:inbound-resourceadapterType"
+		   minOccurs="0"/>
+      <xsd:element name="adminobject"
+		   type="j2ee:adminobjectType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="security-permission"
+		   type="j2ee:security-permissionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="security-permissionType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The security-permissionType specifies a security
+	permission that is required by the resource adapter code.
+
+	The security permission listed in the deployment descriptor
+	are ones that are different from those required by the
+	default permission set as specified in the connector
+	specification. The optional description can mention specific
+	reason that resource adapter requires a given security
+	permission.
+
+      </xsd:documentation>
+    </xsd:annotation>
+
+    <xsd:sequence>
+      <xsd:element name="description"
+		   type="j2ee:descriptionType"
+		   minOccurs="0"
+		   maxOccurs="unbounded"/>
+      <xsd:element name="security-permission-spec"
+		   type="j2ee:xsdStringType">
+	<xsd:annotation>
+	  <xsd:documentation>
+
+	    The element security-permission-spec specifies a security
+	    permission based on the Security policy file
+	    syntax. Refer to the following URL for Sun's
+	    implementation of the security permission
+	    specification:
+
+	    http://java.sun.com/products/jdk/1.4/docs/guide/security/PolicyFiles.html#FileSyntax
+	  </xsd:documentation>
+	</xsd:annotation>
+      </xsd:element>
+    </xsd:sequence>
+    <xsd:attribute name="id" type="xsd:ID"/>
+  </xsd:complexType>
+
+<!-- **************************************************** -->
+
+  <xsd:complexType name="transaction-supportType">
+    <xsd:annotation>
+      <xsd:documentation>
+
+	The transaction-supportType specifies the level of
+	transaction support provided by the resource adapter. It is
+	used by transaction-support elements.
+
+	The value must be one of the following:
+
+	    NoTransaction
+	    LocalTransaction
+	    XATransaction
+
+      </xsd:documentation>
+    </xsd:annotation>
+    <xsd:simpleContent>
+      <xsd:restriction base="j2ee:string">
+	<xsd:enumeration value="NoTransaction"/>
+	<xsd:enumeration value="LocalTransaction"/>
+	<xsd:enumeration value="XATransaction"/>
+      </xsd:restriction>
+    </xsd:simpleContent>
+  </xsd:complexType>
+
+</xsd:schema>
+

Propchange: geronimo/trunk/sandbox/eclipse-plugin/org.apache.geronimo.deployment.model/schema/connector_1_5.xsd
------------------------------------------------------------------------------
    svn:executable = *



Mime
View raw message