Return-Path:
- * Description:
- * The number of seconds the distributed
- * system will wait after the ack-wait-threshold for a message to be
- * acknowledged before it issues an alert at severe level. The
- * default value is zero, which turns off this feature.
- * When ack-severe-alert-threshold is used, GemFire will also initiate
- * additional checks to see if the process is alive. These checks will
- * begin when the ack-wait-threshold is reached and will continue until
- * GemFire has been able to communicate with the process and ascertain its
- * status.
- * Default: "0"
- *
- * Allowed values: 0..2147483647
- */
- String ACK_SEVERE_ALERT_THRESHOLD = "ack-severe-alert-threshold";
- /**
- * The static String definition of the "ack-wait-threshold" property
- *
- * Description: The IP address that this distributed system's - * server sockets will listen on. - * If set to an empty string then the local machine's - * default address will be listened on. - *
- * Default: "" - */ - String BIND_ADDRESS = "bind-address"; - /** - * The static String definition of the "cache-xml-file" property - *
- * Description: Specifies the name of the XML file or resource - * to initialize the cache with when it is - * {@linkplain com.gemstone.gemfire.cache.CacheFactory#create created}. - * Create will first look for a file that matches the value of this property. - * If a file is not found then it will be searched for using - * {@link java.lang.ClassLoader#getResource}. If the value of this - * property is the empty string (""
), then the cache
- * will not be declaratively initialized.
- * Default: "cache.xml"
- */
- String CACHE_XML_FILE = "cache-xml-file";
- /**
- * The static String definition of the "cluster-configuration-dir" property
- *
- * Description: This property specifies the directory in which the cluster configuration related disk-store and artifacts are stored
- * This property is only applicable to dedicated locators which have "enable-cluster-configuration" set to true.
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String CLUSTER_CONFIGURATION_DIR = "cluster-configuration-dir";
- /**
- * The static String definition of the "cluster-ssl-ciphers" property
- *
- * Description: A space separated list of the SSL cipher suites to
- * enable. Those listed must be supported by the available providers.Preferably
- * use cluster-ssl-* properties rather than ssl-* properties.
- *
- * Default: "any"
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_CIPHERS = "cluster-ssl-ciphers";
- /**
- * The static String definition of the "cluster-ssl-enabled" property
- *
- * Description: If true, all gemfire socket communication is
- * configured to use SSL through JSSE. Preferably Use cluster-ssl-* properties
- * rather than ssl-* properties.
- *
- * Default: "false"
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_ENABLED = "cluster-ssl-enabled";
- /**
- * The static String definition of the "cluster-ssl-keystore" property
- *
- * DescriptionLocation of the Java keystore file containing
- * certificate and private key.
- * Default: ""
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_KEYSTORE = "cluster-ssl-keystore";
- /**
- * The static String definition of the "cluster-ssl-keystore-password" property
- *
- * DescriptionPassword to access the private key from the keystore
- * file specified by javax.net.ssl.keyStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_KEYSTORE_PASSWORD = "cluster-ssl-keystore-password";
- /**
- * The static String definition of the "cluster-ssl-keystore-type" property
- *
- * DescriptionFor Java keystore file format, this property has the
- * value jks (or JKS).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_KEYSTORE_TYPE = "cluster-ssl-keystore-type";
- /**
- * The static String definition of the "cluster-ssl-protocols" property
- *
- * Description: A space separated list of the SSL protocols to
- * enable. Those listed must be supported by the available providers.Preferably
- * use cluster-ssl-* properties rather than ssl-* properties.
- *
- * Default: "any"
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_PROTOCOLS = "cluster-ssl-protocols";
- /**
- * The static String definition of the "cluster-ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the
- * client side of the connection to be authenticated.Preferably use
- * cluster-ssl-* properties rather than ssl-* properties.
- *
- * Default: "true"
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_REQUIRE_AUTHENTICATION = "cluster-ssl-require-authentication";
- /**
- * The static String definition of the "cluster-ssl-truststore" property
- *
- * DescriptionLocation of the Java keystore file containing the
- * collection of CA certificates trusted by distributed member (trust store).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_TRUSTSTORE = "cluster-ssl-truststore";
- /**
- * The static String definition of the "cluster-ssl-truststore-password" property
- *
- * DescriptionPassword to unlock the keystore file (store password)
- * specified by javax.net.ssl.trustStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String CLUSTER_SSL_TRUSTSTORE_PASSWORD = "cluster-ssl-truststore-password";
- /**
- * The static String definition of the "conflate-events" property
- *
- * Description: This is a client-side property that is passed to
- * the server. Allowable values are "server", "true", and "false". With the
- * "server" setting, this client's servers use their own client queue
- * conflation settings. With a "true" setting, the servers disregard their
- * own configuration and enable conflation of events for all regions for the
- * client. A "false" setting causes the client's servers to disable
- * conflation for all regions for the client.
- * Default: "server"
- * Since: GemFire 5.7
- */
- String CONFLATE_EVENTS = "conflate-events";
- /**
- * The static String definition of the "conserve-sockets" property
- *
- * Description: If "true" then a minimal number of sockets
- * will be used when connecting to the distributed system. This conserves
- * resource usage but can cause performance to suffer.
- * If "false" then every application thread that sends
- * distribution messages to other members of the distributed system
- * will own its own sockets and have exclusive access to them.
- * The length of time a thread can have exclusive access to a socket
- * can be configured with "socket-lease-time".
- * Default: "true"
- * Allowed values: true|false
- */
- String CONSERVE_SOCKETS = "conserve-sockets";
- /**
- * The static String definition of the "delta-propagation" property
- *
- * System.getProperty("user.dir")
.
- *
- * Default: System.getProperty("user.dir")
- * Since: GemFire 7.0
- */
- String DEPLOY_WORKING_DIR = "deploy-working-dir";
- /**
- * The static String definition of the "disable-auto-reconnect" property
- *
- * Description: By default GemFire will attempt to reconnect and
- * reinitialize the cache when it has been forced out of the distributed system
- * by a network-partition event or has otherwise been shunned by other members.
- * This setting will turn off this behavior.
- * Default: "false"
- */
- String DISABLE_AUTO_RECONNECT = "disable-auto-reconnect";
- /**
- * The static String definition of the "disable-tcp" property
- * - * Description: Turns off use of tcp/ip sockets, forcing the - * cache to use datagram sockets for all communication. This is useful - * if you have a large number of processes in the distributed cache since - * it eliminates the per-connection reader-thread that is otherwise required. - * However, udp communications are somewhat slower than tcp/ip communications - * due to the extra work required in Java to break messages down to - * transmittable sizes, and the extra work required to guarantee - * message delivery. - *
- * Default: "false"
- * Allowed values: true or false
- * Since: GemFire 5.0 - */ - String DISABLE_TCP = "disable-tcp"; - /** - * The static String definition of the "distributed-system-id" property
- *
- * Decription:A number that uniquely identifies this distributed system, when
- * using the WAN gateway to share data between multiple distributed systems. This
- * setting is only required when using the WAN gateway in conjunction with
- * the Portable Data eXchange (PDX) serialization format.
- *
- * If set, this setting must be the same for every member in this distributed
- * system. It must be different than the number in other distributed systems
- * that this one will connect to using the WAN.
- * -1 means no setting.
- * Range:-1..255
- *
- * Default:: "-1"
- */
- String DISTRIBUTED_SYSTEM_ID = "distributed-system-id";
- /**
- * The static String definition of the "durable-client-id" property
- *
- * By default, partitioned regions will try to put redundancy copies on different physical hosts, but it may - * put them on the same physical host if no other hosts are available. Setting this property to true - * will prevent partitions regions from ever putting redundant copies of data on the same physical host. - *
- * Default: "false" - */ - String ENFORCE_UNIQUE_HOST = "enforce-unique-host"; - /** - * The static String definition of the "gateway-ssl-ciphers" property - * - * Description: A space seperated list of the SSL cipher suites to enable. - * Those listed must be supported by the available providers. - * - * Default:any
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_CIPHERS = "gateway-ssl-ciphers";
- /**
- * The static String definition of the "gateway-ssl-enabled" property
- *
- * Description: Specifies if gateway is started with separate ssl configuration.
- * If not specified global property ssl-enabled (and its other related properties) are used
- * to create gateway socket
- *
- * Default: false
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_ENABLED = "gateway-ssl-enabled";
- /**
- * The static String definition of the "gateway-ssl-keystore" property
- *
- * DescriptionLocation of the Java keystore file containing
- * certificate and private key.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_KEYSTORE = "gateway-ssl-keystore";
- /**
- * The static String definition of the "gateway-ssl-keystore-password" property
- *
- * DescriptionPassword to access the private key from the keystore
- * file specified by javax.net.ssl.keyStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_KEYSTORE_PASSWORD = "gateway-ssl-keystore-password";
- /**
- * The static String definition of the "gateway-ssl-keystore-type" property
- *
- * DescriptionFor Java keystore file format, this property has the
- * value jks (or JKS).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_KEYSTORE_TYPE = "gateway-ssl-keystore-type";
- /**
- * The static String definition of the "gateway-ssl-protocols" property
- *
- * Description: A space seperated list of the SSL protocols to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: any
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_PROTOCOLS = "gateway-ssl-protocols";
- /**
- * The static String definition of the "gateway-ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the Gateway Sender
- * side of the connection to be authenticated.
- *
- * Default: any
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_REQUIRE_AUTHENTICATION = "gateway-ssl-require-authentication";
- /**
- * The static String definition of the "gateway-ssl-truststore" property
- *
- * DescriptionLocation of the Java keystore file containing the
- * collection of CA certificates trusted by server (trust store).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_TRUSTSTORE = "gateway-ssl-truststore";
- /**
- * The static String definition of the "gateway-ssl-truststore-password" property
- *
- * Description: Password to unlock the keystore file (store password)
- * specified by javax.net.ssl.trustStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String GATEWAY_SSL_TRUSTSTORE_PASSWORD = "gateway-ssl-truststore-password";
- /**
- * The static String definition of the "groups" property.
- * - * Description: Defines the list of groups this member belongs to. - * Use commas to separate group names. - * Note that anything defined by the deprecated roles gemfire property will also be considered a group. - *
- * Default: "" - *
- * Since: GemFire 7.0 - */ - String GROUPS = "groups"; - /** - * The static String definition of the "http-service-bind-address" property - *
- * Description: The address where the GemFire HTTP service will listen - * for remote connections. One can use this property to configure what ip - * address or host name the HTTP service will listen on. When not set, by - * default the HTTP service will listen on the local host's address. - * - * Default: "" - * Since: GemFire 8.0 - */ - String HTTP_SERVICE_BIND_ADDRESS = "http-service-bind-address"; - /** - * The static String definition of the "http-service-port" property - * - * Description: Specifies the port used by the GemFire HTTP service. If - * configured with non-zero value, then an HTTP service will listen on this port. - * A value of "0" disables Gemfire HTTP service. - * - * Default: "7070" - * Allowed values: 0..65535 - * Since: GemFire 8.0 - */ - String HTTP_SERVICE_PORT = "http-service-port"; - /** - * The static String definition of the "http-service-ssl-ciphers" property - * - * Description: A space separated list of the SSL cipher suites to enable. - * Those listed must be supported by the available providers. - * - * Default:any
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_CIPHERS = "http-service-ssl-ciphers";
- /**
- * The static String definition of the "http-service-ssl-enabled" property
- * a name="http-service-ssl-enabled"/a>
- * Description: Specifies if http service is started with separate ssl configuration.
- * If not specified, global property cluster-ssl-enabled (and its other related properties) are used
- * to secure http service. All http-service-ssl-* properties are inherited from cluster-ssl-* properties.
- * User can ovverride them using specific http-service-ssl-* property.
- *
- * Default: false
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_ENABLED = "http-service-ssl-enabled";
- /**
- * The static String definition of the "http-service-ssl-keystore" property
- *
- * Description: Location of the Java keystore file containing
- * certificate and private key.
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_KEYSTORE = "http-service-ssl-keystore";
- /**
- * The static String definition of the "http-service-ssl-keystore-password" property
- *
- * Description: Password to access the private key from the keystore
- * file specified by javax.net.ssl.keyStore.
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_KEYSTORE_PASSWORD = "http-service-ssl-keystore-password";
- /**
- * The static String definition of the "http-service-ssl-keystore-type" property
- *
- * Description: For Java keystore file format, this property has the
- * value jks (or JKS).
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_KEYSTORE_TYPE = "http-service-ssl-keystore-type";
- /**
- * The static String definition of the "http-service-ssl-protocols" property
- *
- * Description: A space separated list of the SSL protocols to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: any
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_PROTOCOLS = "http-service-ssl-protocols";
- /**
- * The static String definition of the "http-service-ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the client
- * side of the connection to be authenticated.
- *
- * Default: false
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_REQUIRE_AUTHENTICATION = "http-service-ssl-require-authentication";
- /**
- * The static String definition of the "http-service-ssl-truststore" property
- *
- * Description: Location of the Java keystore file containing the
- * collection of CA certificates trusted by server (trust store).
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_TRUSTSTORE = "http-service-ssl-truststore";
- /**
- * The static String definition of the "http-service-ssl-truststore-password" property
- *
- * Description: Password to unlock the keystore file (store password)
- * specified by javax.net.ssl.trustStore.
- *
- * Default: ""
- * Since: GemFire 8.1
- */
- String HTTP_SERVICE_SSL_TRUSTSTORE_PASSWORD = "http-service-ssl-truststore-password";
- /**
- * The static String definition of the "jmx-manager" property
- *
- * Description: If true then this member is willing to be a jmx-manager.
- * All the other jmx-manager properties will be used when it does become a manager.
- * If this property is false then all other jmx-manager properties are ignored.
- *
- * Default: "false except on locators"
- */
- String JMX_MANAGER = "jmx-manager";
- /**
- * The static String definition of the "jmx-manager-access-file" property
- *
- * Description: By default the jmx-manager will allow full access to all mbeans by any client.
- * If this property is set to the name of a file then it can restrict clients to only being able to read
- * mbeans; they will not be able to modify mbeans. The access level can be configured differently in this
- * file for each user name defined in the password file.
- * For more information about the format of this file see Oracle's documentation of the
- * com.sun.management.jmxremote.access.file system property.
- * Ignored if jmx-manager is false or if jmx-manager-port is zero.
- *
- * Default: ""
- */
- String JMX_MANAGER_ACCESS_FILE = "jmx-manager-access-file";
- /**
- * The static String definition of the "jmx-manager-bind-address" property
- *
- * Description: By default the jmx-manager when configured with a port will listen
- * on all the local host's addresses. You can use this property to configure what ip address
- * or host name the jmx-manager will listen on. In addition, if the embedded http server is
- * started, it will also bind to this address if it is set.
- * Ignored if jmx-manager is false or jmx-manager-port is zero.
- *
- * Default: ""
- */
- String JMX_MANAGER_BIND_ADDRESS = "jmx-manager-bind-address";
- /**
- * The static String definition of the "jmx-manager-hostname-for-clients" property
- *
- * Description: Lets you control what hostname will be given to clients that ask
- * the locator for the location of a jmx manager. By default the ip address that the jmx-manager
- * reports is used. But for clients on a different network this property allows you to configure
- * a different hostname that will be given to clients.
- * Ignored if jmx-manager is false or jmx-manager-port is zero.
- *
- * Default: ""
- */
- String JMX_MANAGER_HOSTNAME_FOR_CLIENTS = "jmx-manager-hostname-for-clients";
- /**
- * The static String definition of the "jmx-manager-http-port" property
- *
- * Description: If non-zero then when the jmx manager is started, an embedded
- * web server will also be started and will listen on this port.
- * The web server is used to host the GemFire Pulse application.
- * If you are hosting the Pulse web app in your own web server, then disable
- * this embedded server by setting this property to zero.
- * Ignored if jmx-manager is false.
- *
- * Default: "7070"
- * Deprecated: as of GemFire8.0 use http-service-port
instead.
- *
- * @deprecated as of GemFire 8.0 use {@link #HTTP_SERVICE_PORT} instead.
- */
- String JMX_MANAGER_HTTP_PORT = "jmx-manager-http-port";
- /**
- * The static String definition of the "jmx-manager-password-file" property
- *
- * Description: By default the jmx-manager will allow clients without credentials to connect.
- * If this property is set to the name of a file then only clients that connect with credentials that
- * match an entry in this file will be allowed.
- * Most JVMs require that the file is only readable by the owner.
- * For more information about the format of this file see Oracle's documentation of the
- * com.sun.management.jmxremote.password.file system property.
- * Ignored if jmx-manager is false or if jmx-manager-port is zero.
- *
- * Default: ""
- */
- String JMX_MANAGER_PASSWORD_FILE = "jmx-manager-password-file";
- /**
- * The static String definition of the "jmx-manager-port" property
- *
- * Description: The port this jmx manager will listen to for client connections.
- * If this property is set to zero then GemFire will not allow remote client connections
- * but you can alternatively use the standard system properties supported by the JVM
- * for configuring access from remote JMX clients.
- * Ignored if jmx-manager is false.
- *
- * Default: "1099"
- */
- String JMX_MANAGER_PORT = "jmx-manager-port";
- /**
- * The static String definition of the "jmx-manager-ssl" property
- *
- * Description: If true and jmx-manager-port is not zero then the jmx-manager
- * will only accept ssl connections. Note that the ssl-enabled property does not apply to the jmx-manager
- * but the other ssl properties do. This allows ssl to be configured for just the jmx-manager
- * without needing to configure it for the other GemFire connections.
- * Ignored if jmx-manager is false.
- *
- * Default: "false"
- * Deprecated: as of GemFire 8.0 use jmx-manager-ssl-enabled
instead.
- *
- * @deprecated as of GemFire 8.0 use {@link #JMX_MANAGER_SSL_ENABLED} instead.
- */
- String JMX_MANAGER_SSL = "jmx-manager-ssl";
- /**
- * The static String definition of the "jmx-manager-start" property
- *
- * Description: If true then this member will start a jmx manager when
- * it creates a cache. Management tools like gfsh can be configured to connect
- * to the jmx-manager. In most cases you should not set this because a jmx manager will
- * automatically be started when needed on a member that sets "jmx-manager" to true.
- * Ignored if jmx-manager is false.
- *
- * Default: "false"
- */
- String JMX_MANAGER_START = "jmx-manager-start";
- /**
- * The static String definition of the "jmx-manager-update-rate" property
- *
- * Description: The rate, in milliseconds, at which this member will push updates
- * to any jmx managers. Currently this value should be greater than or equal to the
- * statistic-sample-rate. Setting this value too high will cause stale values to be
- * seen by gfsh and pulse.
- *
- * Default: "2000"
- */
- String JMX_MANAGER_UPDATE_RATE = "jmx-manager-update-rate";
- /**
- * The static String definition of the "jmx-manager-ssl-ciphers" property
- *
- * Description: A space seperated list of the SSL cipher suites to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: "any"
- */
- String JMX_MANAGER_SSL_CIPHERS = "jmx-manager-ssl-ciphers";
- /**
- * The static String definition of the "jmx-manager-ssl-enabled" property
- *
- * Description: If true and jmx-manager-port is not zero then the jmx-manager
- * will only accept ssl connections. Note that the ssl-enabled property does not apply to the jmx-manager
- * but the other ssl properties do. This allows ssl to be configured for just the jmx-manager
- * without needing to configure it for the other GemFire connections.
- * Ignored if jmx-manager is false.
- *
- * Default: "false"
- */
- String JMX_MANAGER_SSL_ENABLED = "jmx-manager-ssl-enabled";
- /**
- * The static String definition of the "jmx-manager-ssl-keystore" property
- *
- * Description: Location of the Java keystore file containing
- * certificate and private key.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String JMX_MANAGER_SSL_KEYSTORE = "jmx-manager-ssl-keystore";
- /**
- * The static String definition of the "jmx-manager-ssl-keystore-password" property
- *
- * Description: Password to access the private key from the keystore
- * file specified by javax.net.ssl.keyStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String JMX_MANAGER_SSL_KEYSTORE_PASSWORD = "jmx-manager-ssl-keystore-password";
- /**
- * The static String definition of the "jmx-manager-ssl-keystore-type" property
- *
- * Description: For Java keystore file format, this property has the
- * value jks (or JKS).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String JMX_MANAGER_SSL_KEYSTORE_TYPE = "jmx-manager-ssl-keystore-type";
- /**
- * The static String definition of the "jmx-manager-ssl-protocols" property
- *
- * Description: A space seperated list of the SSL protocols to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: "any"
- */
- String JMX_MANAGER_SSL_PROTOCOLS = "jmx-manager-ssl-protocols";
- /**
- * The static String definition of the "jmx-manager-ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the client
- * side of the connection to be authenticated.
- *
- * Default: "true"
- */
- String JMX_MANAGER_SSL_REQUIRE_AUTHENTICATION = "jmx-manager-ssl-require-authentication";
- /**
- * The static String definition of the "jmx-manager-ssl-truststore" property
- *
- * Description: Location of the Java keystore file containing the
- * collection of CA certificates trusted by manager (trust store).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String JMX_MANAGER_SSL_TRUSTSTORE = "jmx-manager-ssl-truststore";
- /**
- * The static String definition of the "jmx-manager-ssl-truststore-password" property
- *
- * Description: Password to unlock the keystore file (store password)
- * specified by javax.net.ssl.trustStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String JMX_MANAGER_SSL_TRUSTSTORE_PASSWORD = "jmx-manager-ssl-truststore-password";
- String LICENCE_APPLICATION_CACHE = "license-application-cache";
- String LICENCE_DATA_MANAGEMENT = "license-data-management";
- String LICENCE_SERVER_TIMEOUT = "license-server-timeout";
- String LICENCE_WORKING_DIR = "license-working-dir";
- /**
- * The static String definition of the "load-cluster-configuration-from-dir" property
- *
- * Description: "true" causes loading of cluster configuration from "cluster_config" directory in the locator.
- * This property is only applicable to dedicated locators which have "enable-cluster-configuration" set to true.
- *
- * Default: "false"
- * Allowed values: true or false
- * Since: GemFire 8.0
- */
- String LOAD_CLUSTER_CONFIGURATION_FROM_DIR = "load-cluster-configuration-from-dir";
- /**
- * The static String definition of the "locator-wait-time" property
- * - * Description: The number of seconds to wait for a locator to start - * if one is not available when attempting to join the distributed system. This - * setting can be used when locators and peers are being started all at once in - * order to have the peers be patient and wait for the locators to finish starting - * up before attempting to join the distributed system..
- *
- * Default: "0"
- */
- String LOCATOR_WAIT_TIME = "locator-wait-time";
- /**
- * The static String definition of the "locators" property
- *
- * Description: A list of locators (host and port) that
- * are used to find other member of the distributed system. This
- * attribute's value is a possibly empty comma separated list. Each
- * element must be of the form "hostName[portNum]" and may be of the
- * form "host:bindAddress[port]" if a specific bind address is to be
- * used on the locator machine. The square
- * brackets around the portNum are literal character and must be
- * specified.
- * Since IPv6 bind addresses may contain colons, you may use an at symbol
- * instead of a colon to separate the host name and bind address.
- * For example, "server1@fdf0:76cf:a0ed:9449::5[12233]" specifies a locator
- * running on "server1" and bound to fdf0:76cf:a0ed:9449::5 on port 12233.
- * If "locators" is empty
- * then this distributed system will be isolated from all other GemFire
- * processes.
- *
- * Default: ""
- */
- String LOCATORS = "locators";
- /**
- * The static String definition of the "log-disk-space-limit" property
- *
disable-auto-reconnect
) or if the deprecated required-roles
- * feature is being used and a role-loss has triggered a shutdown and reconnect.
- *
- * Default: "60000"
- * Since: GemFire 5.0
- */
- String MAX_WAIT_TIME_RECONNECT = "max-wait-time-reconnect";
- /**
- * The static String definition of the "mcast-address" property
- * - * Description: The IP address used for multicast - * networking. If mcast-port is zero, then mcast-address is - * ignored. - *
- * Default: "239.192.81.1"
- */
- String MCAST_ADDRESS = "mcast-address";
- /**
- * The static String definition of the "mcast-flow-control" property
- *
- * Description: Configures the flow-of-control protocol for
- * multicast messaging. There are three settings that are separated
- * by commas: byteAllowance (integer), rechargeThreshold (float) and
- * rechargeBlockMs (integer). The byteAllowance determines how many bytes
- * can be sent without a recharge from other processes. The rechargeThreshold
- * tells receivers how low the sender's initial to remaining allowance
- * ratio should be before sending a recharge. The rechargeBlockMs
- * tells the sender how long to wait for a recharge before explicitly
- * requesting one.
- * Deprecated: as of 9.0 GemFire does not include a flow-of-control protocol for multicast messaging.
- * Default: "1048576,0.25,5000"
- * Allowed values: 100000-maxInt, 0.1-0.5, 500-60000
- * Since: GemFire 5.0
- */
- String MCAST_FLOW_CONTROL = "mcast-flow-control";
- /**
- * The static String definition of the "mcast-port" property
- *
- * Description: The port used for multicast networking.
- * If zero, then multicast will be disabled and unicast messaging will
- * be used.
- *
- * Default: "0"
- */
- String MCAST_PORT = "mcast-port";
- /**
- * The static String definition of the "mcast-recv-buffer-size" property
- *
- * Description: Sets the size of the socket buffer used for
- * incoming multicast transmissions. You should set this high if there will be
- * high volumes of messages.
- * Default: "1048576"
- * Allowed values: 2048..Operating System maximum
- * Since: GemFire 5.0
- */
- String MCAST_RECV_BUFFER_SIZE = "mcast-recv-buffer-size";
- /**
- * The static String definition of the "mcast-send-buffer-size" property
- *
- * Description: Sets the size of the socket buffer used for
- * outgoing multicast transmissions.
- * Default: "65535"
- * Allowed values: 2048..Operating System maximum
- * Since: GemFire 5.0
- */
- String MCAST_SEND_BUFFER_SIZE = "mcast-send-buffer-size";
- /**
- * The static String definition of the "mcast-ttl" property
- *
- * Description: Determines how far through your network
- * the multicast packets used by GemFire will propagate.
- * Default: "32"
- * Allowed values: 0..255
- * Since: GemFire 4.1
- */
- String MCAST_TTL = "mcast-ttl";
- /**
- * The static String definition of the "member-timeout" property
- *
- * Description: Sets the timeout interval, in milliseconds, used
- * to determine whether another process is alive or not. When another process
- * appears to be gone, GemFire sends it an ARE-YOU-DEAD message and waits
- * for the member-timeout period for it to respond and declare it is not dead.
- *
- * Default: "5000"
- * Allowed values: 1000-600000
- * Since: GemFire 5.0
- */
- String MEMBER_TIMEOUT = "member-timeout";
- /**
- * The static String definition of the "membership-port-range" property
- *
- * Description: The allowed range of ports for use in forming an
- * unique membership identifier (UDP), for failure detection purposes (TCP) and
- * to listen on for peer connections (TCP). This range is given as two numbers
- * separated by a minus sign. Minimum 3 values in range are required to
- * successfully startup.
- *
- * Default: 1024-65535
- */
- String MEMBERSHIP_PORT_RANGE = "membership-port-range";
- /**
- * The static String definition of the "memcached-bind-address" property
- *
- * Description: Uniquely identifies a member in its distributed system. - * If two members with the same name try to join the same distributed system - * then the second join will fail.
- * Default: "" - */ - String NAME = "name"; - /** - * The static String definition of the "redundancy-zone" property - *
- * Description: Defines the redundancy zone from this member. If this property is set, partitioned - * regions will not put two redundant copies of data in two members with the same redundancy zone setting. - * - * Default: "" - */ - String REDUNDANCY_ZONE = "redundancy-zone"; - /** - * The static String definition of the "remote-locators" property - *- * Description: A list of locators (host and port) that a cluster - * will use in order to connect to a remote site in a multi-site (WAN) - * configuration. This attribute's value is a possibly comma separated list. - *
For each remote locator, provide a hostname and/or address - * (separated by '@', if you use both), followed by a port number in brackets. - *
Examples: - * remote-locators=address1[port1],address2[port2] - *
- * remote-locators=hostName1@address1[port1],hostName2@address2[port2] - *
- * remote-locators=hostName1[port1],hostName2[port2]
- *
- * Default: "" - */ - String REMOTE_LOCATORS = "remote-locators"; - /** - * The static String definition of the "remove-unresponsive-client" - * property - */ - String REMOVE_UNRESPONSIVE_CLIENT = "remove-unresponsive-client"; - /** - * The static String definition of the "roles" property - *
- * Description: Specifies the application roles that this member - * performs in the distributed system. This is a comma delimited list of - * user-defined strings. Any number of members can be configured to perform - * the same role, and a member can be configured to perform any number of - * roles. - * Note that anything defined by the groups gemfire property will also be considered a role. - * - * Default: "" - * Since: GemFire 5.0 - * Deprecated: This feature is scheduled to be removed. - * - * @deprecated : This feature is scheduled to be removed. - */ - String ROLES = "roles"; - /** - * The static String definition of the security prefix "security-" used in conjunction with other security-* properties property - * - * Description: Mechanism to define client credentials. - * All tags with "security-" prefix is packaged together as security properties - * and passed as an argument to getCredentials of Authentication module. - * These tags cannot have null values. - * - * Default: Optional - * Allowed values: any string - */ - String SECURITY_PREFIX = "security-"; - /** - * The static String definition of the "security-client-accessor" - * property - */ - String SECURITY_CLIENT_ACCESSOR = SECURITY_PREFIX + "client-accessor"; - /** - * The static String definition of the "security-client-accessor-pp" - * property - */ - String SECURITY_CLIENT_ACCESSOR_PP = SECURITY_PREFIX + "client-accessor-pp"; - /** - * The static String definition of the "security-client-auth-init" property - * - * Description: Authentication module name for Clients that requires to act - * upon credentials read from the gemfire.properties file. - * Module must implement AuthInitialize interface. - * - * Default: "" - * Allowed values: jar file:class name - */ - String SECURITY_CLIENT_AUTH_INIT = SECURITY_PREFIX + "client-auth-init"; - /** - * The static String definition of the "security-client-authenticator" - * property - */ - String SECURITY_CLIENT_AUTHENTICATOR = SECURITY_PREFIX + "client-authenticator"; - /** - * The static String definition of the "security-client-dhalgo" - * property - */ - String SECURITY_CLIENT_DHALGO = SECURITY_PREFIX + "client-dhalgo"; - /** - * The static String definition of the "security-log-file" - * property - */ - String SECURITY_LOG_FILE = SECURITY_PREFIX + "log-file"; - /** - * The static String definition of the "security-log-level" - * property - */ - String SECURITY_LOG_LEVEL = SECURITY_PREFIX + "log-level"; - /** - * The static String definition of the "security-peer-auth-init" - * property - */ - String SECURITY_PEER_AUTH_INIT = SECURITY_PREFIX + "peer-auth-init"; - /** - * The static String definition of the "security-peer-authenticator" - * property - */ - String SECURITY_PEER_AUTHENTICATOR = SECURITY_PREFIX + "peer-authenticator"; - /** - * The static String definition of the "security-peer-verifymember-timeout" - * property - */ - String SECURITY_PEER_VERIFY_MEMBER_TIMEOUT = SECURITY_PREFIX + "peer-verifymember-timeout"; - /** - * The static String definition of the "server-bind-address" property - *- * Description: The IP address that this distributed system's - * server sockets in a client-server topology will listen on. - * If set to an empty string then all of the local machine's - * addresses will be listened on. - *
- * Default: "" - */ - String SERVER_BIND_ADDRESS = "server-bind-address"; - /** - * The static String definition of the "server-ssl-ciphers" property - *
- * Description: A space seperated list of the SSL cipher suites to enable. - * Those listed must be supported by the available providers. - * - * Default:any
- * Since: GemFire 8.0
- */
- String SERVER_SSL_CIPHERS = "server-ssl-ciphers";
- /**
- * The static String definition of the "server-ssl-enabled" property
- *
- * Description: Specifies if server is started with separate ssl configuration.
- * If not specified global property ssl-enabled (and its other related properties) are used
- * to create server socket
- *
- * Default: false
- * Since: GemFire 8.0
- */
- String SERVER_SSL_ENABLED = "server-ssl-enabled";
- /**
- * The static String definition of the "server-ssl-keystore" property
- *
- * Description: Location of the Java keystore file containing
- * certificate and private key.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String SERVER_SSL_KEYSTORE = "server-ssl-keystore";
- /**
- * The static String definition of the "server-ssl-keystore-password" property
- *
- * Description: Password to access the private key from the keystore
- * file specified by javax.net.ssl.keyStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String SERVER_SSL_KEYSTORE_PASSWORD = "server-ssl-keystore-password";
- /**
- * The static String definition of the "server-ssl-keystore-type" property
- *
- * Description: For Java keystore file format, this property has the
- * value jks (or JKS).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String SERVER_SSL_KEYSTORE_TYPE = "server-ssl-keystore-type";
- /**
- * The static String definition of the "server-ssl-protocols" property
- *
- * Description: A space seperated list of the SSL protocols to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: any
- * Since: GemFire 8.0
- */
- String SERVER_SSL_PROTOCOLS = "server-ssl-protocols";
- /**
- * The static String definition of the "server-ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the client
- * side of the connection to be authenticated.
- *
- * Default: any
- * Since: GemFire 8.0
- */
- String SERVER_SSL_REQUIRE_AUTHENTICATION = "server-ssl-require-authentication";
- /**
- * The static String definition of the "server-ssl-truststore" property
- *
- * Description: Location of the Java keystore file containing the
- * collection of CA certificates trusted by server (trust store).
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String SERVER_SSL_TRUSTSTORE = "server-ssl-truststore";
- /**
- * The static String definition of the "server-ssl-truststore-password" property
- *
- * Description: Password to unlock the keystore file (store password)
- * specified by javax.net.ssl.trustStore.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String SERVER_SSL_TRUSTSTORE_PASSWORD = "server-ssl-truststore-password";
- /**
- * The static String definition of the "socket-buffer-size" property
- *
- * Description: The size of each socket buffer, in bytes.
- * Smaller buffers conserve memory. Larger buffers can improve performance;
- * in particular if large messages are being sent.
- * Default: "32768"
- * Allowed values: 128..16777215
- * Since: GemFire 4.1
- */
- String SOCKET_BUFFER_SIZE = "socket-buffer-size";
- /**
- * The static String definition of the "socket-lease-time" property
- *
- * Description: The number of milliseconds a thread
- * can keep exclusive access to a socket that it is not actively using.
- * Once a thread loses its lease to a socket it will need to re-acquire
- * a socket the next time it sends a message.
- * A value of zero causes socket leases to never expire.
- * This property is ignored if "conserve-sockets" is true.
- * Default: "15000"
- * Allowed values: 0..600000
- * Since: GemFire 4.1
- */
- String SOCKET_LEASE_TIME = "socket-lease-time";
- /**
- * The static String definition of the "start-dev-rest-api" property
- *
- * Description: If true then developer(API) REST service will be
- * started when cache is created. REST service can be configured using
- * http-service-port
and http-service-bind-address
- * properties.
- * Default: "false"
- * Since: GemFire 8.0
- */
- String START_DEV_REST_API = "start-dev-rest-api";
- /**
- * The static String definition of the "start-locator" property
- *
- * Description: A host name or bind-address and port
- * ("host[port],peer=- *
- * The peer and server parameters are optional. They specify whether - * the locator can be used for peers to discover each other, or for clients - * to discover peers. By default both are true. - *
- * Default: "" (doesn't start a locator) - */ - String START_LOCATOR = "start-locator"; - /** - * The static String definition of the "statistic-archive-file" property - * - * Description: The file that statistic samples are - * written to. An empty string (default) disables statistic - * archival. - * - * Default: "" - */ - String STATISTIC_ARCHIVE_FILE = "statistic-archive-file"; - /** - * The static String definition of the "statistic-sample-rate" property - * - * Description: The rate, in milliseconds, at which samples - * of the statistics will be taken. - * If set to a value less than 1000 the rate will be set to 1000 because - * the VSD tool does not support sub-second sampling. - * - * Default: "1000" - * Allowed values: 100..60000 - */ - String STATISTIC_SAMPLE_RATE = "statistic-sample-rate"; - /** - * The static String definition of the "statistic-sampling-enabled" property - * - * Description: "true" causes the statistics to be - * sampled periodically and operating system statistics to be - * fetched each time a sample is taken. "false" disables sampling - * which also disables operating system statistic collection. Non - * OS statistics will still be recorded in memory and can be viewed - * by administration tools. However, charts will show no activity - * and no statistics will be archived while sampling is - * disabled. - * Starting in 7.0 the default value has been changed to true. - * If statistic sampling is disabled it will also cause various - * metrics seen in gfsh and pulse to always be zero. - * - * Default: "true" - * Allowed values: true|false - */ - String STATISTIC_SAMPLING_ENABLED = "statistic-sampling-enabled"; - /** - * The static String definition of the "tcp-port" property - *- * Description: A 16-bit integer that determines the tcp/ip port number to listen on - * for cache communications. If zero, the operating system will select - * an available port to listen on. Each process on a machine must have - * its own tcp-port. Note that some operating systems restrict the range - * of ports usable by non-privileged users, and using restricted port - * numbers can cause runtime errors in GemFire startup. - *
- * Default: "0"
- * Allowed values: 0..65535
- * Since: GemFire 5.0
- */
- String TCP_PORT = "tcp-port";
- /**
- * The static String definition of the "udp-fragment-size" property
- *
- * Description: When messages are sent over datagram sockets,
- * GemFire breaks large messages down into fragments for transmission.
- * This property sets the maximum fragment size for transmission.
- * Default: "60000"
- * Allowed values: 1000..60000
- * Since: GemFire 5.0
- */
- String UDP_FRAGMENT_SIZE = "udp-fragment-size";
- /**
- * The static String definition of the "udp-recv-buffer-size" property
- *
- * Description: Sets the size of the socket buffer used for
- * incoming udp point-to-point transmissions. Note: if multicast is not
- * enabled and disable-tcp is not enabled, a reduced default size of
- * 65535 is used.
- * Default: "1048576 if multicast is enabled or disable-tcp is true, 131071 if not"
- * Allowed values: 2048..Operating System maximum
- * Since: GemFire 5.0
- */
- String UDP_RECV_BUFFER_SIZE = "udp-recv-buffer-size";
- /**
- * The static String definition of the "udp-send-buffer-size" property
- *
- * Description: Sets the size of the socket buffer used for
- * outgoing udp point-to-point transmissions.
- * Default: "65535"
- * Allowed values: 2048..Operating System maximum
- * Since: GemFire 5.0
- */
- String UDP_SEND_BUFFER_SIZE = "udp-send-buffer-size";
- /**
- * The static String definition of the "use-cluster-configuration" property
- *
CommandMarker
interface.
- * Matching classes will be loaded when the VM starts and will be available
- * in the GFSH command-line utility.
- *
- * Default: ""
- * Since: GemFire 8.0
- */
- String USER_COMMAND_PACKAGES = "user-command-packages";
- /**
- * The static String definition of the "off-heap-memory-size" property
- *
- * Description: The total size of off-heap memory specified as
- * off-heap-memory-size=""
- * Since: Geode 1.0
- */
- String OFF_HEAP_MEMORY_SIZE = "off-heap-memory-size";
- /**
- * The static String definition of the "redis-port" property
- *
- * Description: Specifies the port used by {@link com.gemstone.gemfire.redis.GemFireRedisServer}
- * which enables redis clients to connect and store data in GemFire distributed system.
- * see {@link com.gemstone.gemfire.redis.GemFireRedisServer} for other configuration options.
- * Default: "0" disables GemFireMemcachedServer
- * Allowed values: 0..65535
- */
- String REDIS_PORT = "redis-port";
- /**
- * The static String definition of the "redis-bind-address" property
- *
- * Description: Specifies the bind address used by {@link com.gemstone.gemfire.redis.GemFireRedisServer}
- * Default: ""
- */
- String REDIS_BIND_ADDRESS = "redis-bind-address";
- /**
- * The static String definition of the "redis-password" property
- *
- * Description: Specifies the password to authenticate a client of {@link com.gemstone.gemfire.redis.GemFireRedisServer}
- * Default: ""
- */
- String REDIS_PASSWORD = "redis-password";
- /**
- * The static String definition of the "lock-memory" property
- *
- * Description: Include this option to lock GemFire heap and off-heap memory pages into RAM.
- * This prevents the operating system from swapping the pages out to disk, which can cause sever
- * performance degradation. When you use this command, also configure the operating system limits for
- * locked memory.
- *
- * Default: "false"
- * Since: Geode 1.0
- */
- String LOCK_MEMORY = "lock-memory";
- /**
- * The static String definition of the "shiro-init" property
- */
- String SECURITY_SHIRO_INIT = SECURITY_PREFIX + "shiro-init";
- /**
- * The static String definition of the "distributed-transactions" property
- */
- String DISTRIBUTED_TRANSACTIONS = "distributed-transactions";
- /**
- * The static String definition of the "ssl-enabled" property
- *
- * Description: If true, all gemfire socket communication is
- * configured to use SSL through JSSE.
- *
- * Default: "false"
- * Deprecated: as of GemFire 8.0 use cluster-ssl-enabled
instead.
- *
- * @deprecated as of Gemfire 8.0 use {@link #CLUSTER_SSL_ENABLED} instead.
- */
- String SSL_ENABLED = "ssl-enabled";
- /**
- * The static String definition of the "ssl-protocols" property
- *
- * Description: A space separated list of the SSL protocols to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: "any"
- * Deprecated: as of GemFire 8.0 use cluster-ssl-protocols
instead.
- *
- * @deprecated as of GemFire 8.0 use {@link #CLUSTER_SSL_PROTOCOLS} instead.
- */
- String SSL_PROTOCOLS = "ssl-protocols";
- /**
- * The static String definition of the "ssl-ciphers" property
- *
- * Description: A space separated list of the SSL cipher suites to enable.
- * Those listed must be supported by the available providers.
- *
- * Default: "any"
- * Deprecated: as of GemFire 8.0 use cluster-ssl-ciphers
instead.
- *
- * @deprecated as of GemFire 8.0 use {@link #CLUSTER_SSL_CIPHERS} instead.
- */
- String SSL_CIPHERS = "ssl-ciphers";
- /**
- * The static String definition of the "ssl-require-authentication" property
- *
- * Description: If false, allow ciphers that do not require the client
- * side of the connection to be authenticated.
- *
- * Default: "true"
- * Deprecated: as of GemFire 8.0 use cluster-ssl-require-authentication
instead.
- *
- * @deprecated as of GemFire 8.0 use {@link #CLUSTER_SSL_REQUIRE_AUTHENTICATION} instead.
- */
- String SSL_REQUIRE_AUTHENTICATION = "ssl-require-authentication";
-}
http://git-wip-us.apache.org/repos/asf/incubator-geode/blob/b5ed0935/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
----------------------------------------------------------------------
diff --git a/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java b/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
index 22814a5..1b7316a 100644
--- a/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
+++ b/geode-core/src/main/java/com/gemstone/gemfire/distributed/LocatorLauncher.java
@@ -17,7 +17,7 @@
package com.gemstone.gemfire.distributed;
-import static com.gemstone.gemfire.distributed.DistributedSystemConfigProperties.*;
+import static com.gemstone.gemfire.distributed.ConfigurationProperties.*;
import com.gemstone.gemfire.cache.client.internal.locator.LocatorStatusResponse;
import com.gemstone.gemfire.distributed.internal.DistributionConfig;
http://git-wip-us.apache.org/repos/asf/incubator-geode/blob/b5ed0935/geode-core/src/main/java/com/gemstone/gemfire/distributed/ServerLauncher.java
----------------------------------------------------------------------
diff --git a/geode-core/src/main/java/com/gemstone/gemfire/distributed/ServerLauncher.java b/geode-core/src/main/java/com/gemstone/gemfire/distributed/ServerLauncher.java
index e4fe16c..8f30390 100755
--- a/geode-core/src/main/java/com/gemstone/gemfire/distributed/ServerLauncher.java
+++ b/geode-core/src/main/java/com/gemstone/gemfire/distributed/ServerLauncher.java
@@ -17,7 +17,7 @@
package com.gemstone.gemfire.distributed;
-import static com.gemstone.gemfire.distributed.DistributedSystemConfigProperties.*;
+import static com.gemstone.gemfire.distributed.ConfigurationProperties.*;
import com.gemstone.gemfire.SystemFailure;
import com.gemstone.gemfire.cache.Cache;
@@ -60,7 +60,7 @@ import java.util.concurrent.TimeoutException;
import java.util.concurrent.atomic.AtomicBoolean;
import java.util.concurrent.atomic.AtomicReference;
-import static com.gemstone.gemfire.distributed.DistributedSystemConfigProperties.SERVER_BIND_ADDRESS;
+import static com.gemstone.gemfire.distributed.ConfigurationProperties.SERVER_BIND_ADDRESS;
/**
* The ServerLauncher class is a launcher class with main method to start a GemFire Server (implying a GemFire Cache
http://git-wip-us.apache.org/repos/asf/incubator-geode/blob/b5ed0935/geode-core/src/main/java/com/gemstone/gemfire/distributed/internal/AbstractDistributionConfig.java
----------------------------------------------------------------------
diff --git a/geode-core/src/main/java/com/gemstone/gemfire/distributed/internal/AbstractDistributionConfig.java b/geode-core/src/main/java/com/gemstone/gemfire/distributed/internal/AbstractDistributionConfig.java
index 015f340..c7eca0f 100644
--- a/geode-core/src/main/java/com/gemstone/gemfire/distributed/internal/AbstractDistributionConfig.java
+++ b/geode-core/src/main/java/com/gemstone/gemfire/distributed/internal/AbstractDistributionConfig.java
@@ -32,7 +32,7 @@ import java.net.InetAddress;
import java.net.UnknownHostException;
import java.util.*;
-import static com.gemstone.gemfire.distributed.DistributedSystemConfigProperties.*;
+import static com.gemstone.gemfire.distributed.ConfigurationProperties.*;
/**
* Provides an implementation of DistributionConfig
that