flink-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Flavio Pompermaier <pomperma...@okkam.it>
Subject Re: HBase 0.98 addon for Flink 0.8
Date Thu, 13 Nov 2014 21:06:21 GMT
The only config files available are within the submitted jar. Things works
in eclipse using local environment while fails deploying to the cluster
On Nov 13, 2014 10:01 PM, <fhueske@gmail.com> wrote:

> Does the HBase jar in the lib folder contain a config that could be used
> instead of the config in the job jar file? Or is simply no config at all
> available when the configure method is called?
>
>
>
>
>
>
> --
> Fabian Hueske
> Phone:      +49 170 5549438
> Email:      fhueske@gmail.com
> Web:         http://www.user.tu-berlin.de/fabian.hueske
>
>
>
>
>
> From: Flavio Pompermaier
> Sent: ‎Thursday‎, ‎13‎. ‎November‎, ‎2014 ‎21‎:‎43
> To: dev@flink.incubator.apache.org
>
>
>
>
>
> The hbase jar is in the lib directory on each node while the config files
> are within the jar file I submit from the web client.
> On Nov 13, 2014 9:37 PM, <fhueske@gmail.com> wrote:
>
> > Have you added the hbase.jar file with your HBase config to the ./lib
> > folders of your Flink setup (JobManager, TaskManager) or is it bundled
> with
> > your job.jar file?
> >
> >
> >
> >
> >
> > --
> > Fabian Hueske
> > Phone:      +49 170 5549438
> > Email:      fhueske@gmail.com
> > Web:         http://www.user.tu-berlin.de/fabian.hueske
> >
> >
> >
> >
> >
> > From: Flavio Pompermaier
> > Sent: ‎Thursday‎, ‎13‎. ‎November‎, ‎2014 ‎18‎:‎36
> > To: dev@flink.incubator.apache.org
> >
> >
> >
> >
> >
> > Any help with this? :(
> >
> > On Thu, Nov 13, 2014 at 2:06 PM, Flavio Pompermaier <
> pompermaier@okkam.it>
> > wrote:
> >
> > > We definitely discovered that instantiating HTable and Scan in
> > configure()
> > > method of TableInputFormat causes problem in distributed environment!
> > > If you look at my implementation at
> > >
> >
> https://github.com/fpompermaier/incubator-flink/blob/master/flink-addons/flink-hbase/src/main/java/org/apache/flink/addons/hbase/TableInputFormat.java
> > > you can see that Scan and HTable were made transient and recreated
> within
> > > configure but this causes HBaseConfiguration.create() to fail searching
> > for
> > > classpath files...could you help us understanding why?
> > >
> > > On Wed, Nov 12, 2014 at 8:10 PM, Flavio Pompermaier <
> > pompermaier@okkam.it>
> > > wrote:
> > >
> > >> Usually, when I run a mapreduce job both on Spark and Hadoop I just
> put
> > >> *-site.xml files into the war I submit to the cluster and that's it. I
> > >> think the problem appeared when I made the HTable a private transient
> > field
> > >> and the table istantiation was moved in the configure method.
> > >> Could it be a valid reason? we still have to make a deeper debug but
> I'm
> > >> trying ro figure out where to investigate..
> > >> On Nov 12, 2014 8:03 PM, "Robert Metzger" <rmetzger@apache.org>
> wrote:
> > >>
> > >>> Hi,
> > >>> Maybe its an issue with the classpath? As far as I know is Hadoop
> > reading
> > >>> the configuration files from the classpath. Maybe is the
> hbase-site.xml
> > >>> file not accessible through the classpath when running on the
> cluster?
> > >>>
> > >>> On Wed, Nov 12, 2014 at 7:40 PM, Flavio Pompermaier <
> > >>> pompermaier@okkam.it>
> > >>> wrote:
> > >>>
> > >>> > Today we tried tp execute a job on the cluster instead of on local
> > >>> executor
> > >>> > and we faced the problem that the hbase-site.xml was basically
> > >>> ignored. Is
> > >>> > there a reason why the TableInputFormat is working correctly on
> local
> > >>> > environment while it doesn't on a cluster?
> > >>> > On Nov 10, 2014 10:56 AM, "Fabian Hueske" <fhueske@apache.org>
> > wrote:
> > >>> >
> > >>> > > I don't think we need to bundle the HBase input and output
format
> > in
> > >>> a
> > >>> > > single PR.
> > >>> > > So, I think we can proceed with the IF only and target the
OF
> > later.
> > >>> > > However, the fix for Kryo should be in the master before
merging
> > the
> > >>> PR.
> > >>> > > Till is currently working on that and said he expects this
to be
> > >>> done by
> > >>> > > end of the week.
> > >>> > >
> > >>> > > Cheers, Fabian
> > >>> > >
> > >>> > >
> > >>> > > 2014-11-07 12:49 GMT+01:00 Flavio Pompermaier <
> > pompermaier@okkam.it
> > >>> >:
> > >>> > >
> > >>> > > > I fixed also the profile for Cloudera CDH5.1.3. You
can build
> it
> > >>> with
> > >>> > the
> > >>> > > > command:
> > >>> > > >       mvn clean install -Dmaven.test.skip=true
> -Dhadoop.profile=2
> > >>> > > >  -Pvendor-repos,cdh5.1.3
> > >>> > > >
> > >>> > > > However, it would be good to generate the specific jar
when
> > >>> > > > releasing..(e.g.
> > >>> > > > flink-addons:flink-hbase:0.8.0-hadoop2-cdh5.1.3-incubating)
> > >>> > > >
> > >>> > > > Best,
> > >>> > > > Flavio
> > >>> > > >
> > >>> > > > On Fri, Nov 7, 2014 at 12:44 PM, Flavio Pompermaier
<
> > >>> > > pompermaier@okkam.it>
> > >>> > > > wrote:
> > >>> > > >
> > >>> > > > > I've just updated the code on my fork (synch with
current
> > master
> > >>> and
> > >>> > > > > applied improvements coming from comments on related
PR).
> > >>> > > > > I still have to understand how to write results
back to an
> > HBase
> > >>> > > > > Sink/OutputFormat...
> > >>> > > > >
> > >>> > > > >
> > >>> > > > > On Mon, Nov 3, 2014 at 12:05 PM, Flavio Pompermaier
<
> > >>> > > > pompermaier@okkam.it>
> > >>> > > > > wrote:
> > >>> > > > >
> > >>> > > > >> Thanks for the detailed answer. So if I run
a job from my
> > >>> machine
> > >>> > I'll
> > >>> > > > >> have to download all the scanned data in a
table..right?
> > >>> > > > >>
> > >>> > > > >> Always regarding the GenericTableOutputFormat
it is not
> clear
> > >>> to me
> > >>> > > how
> > >>> > > > >> to proceed..
> > >>> > > > >> I saw in the hadoop compatibility addon that
it is possible
> to
> > >>> have
> > >>> > > such
> > >>> > > > >> compatibility using HBaseUtils class so the
open method
> should
> > >>> > become
> > >>> > > > >> something like:
> > >>> > > > >>
> > >>> > > > >> @Override
> > >>> > > > >> public void open(int taskNumber, int numTasks)
throws
> > >>> IOException {
> > >>> > > > >> if (Integer.toString(taskNumber + 1).length()
> 6) {
> > >>> > > > >> throw new IOException("Task id too large.");
> > >>> > > > >> }
> > >>> > > > >> TaskAttemptID taskAttemptID =
> > >>> > TaskAttemptID.forName("attempt__0000_r_"
> > >>> > > > >> + String.format("%" + (6 - Integer.toString(taskNumber
+
> > >>> > 1).length())
> > >>> > > +
> > >>> > > > >> "s"," ").replace(" ", "0")
> > >>> > > > >> + Integer.toString(taskNumber + 1)
> > >>> > > > >> + "_0");
> > >>> > > > >>  this.configuration.set("mapred.task.id",
> > >>> > taskAttemptID.toString());
> > >>> > > > >> this.configuration.setInt("mapred.task.partition",
> taskNumber
> > +
> > >>> 1);
> > >>> > > > >> // for hadoop 2.2
> > >>> > > > >> this.configuration.set("mapreduce.task.attempt.id",
> > >>> > > > >> taskAttemptID.toString());
> > >>> > > > >> this.configuration.setInt("mapreduce.task.partition",
> > >>> taskNumber +
> > >>> > 1);
> > >>> > > > >>  try {
> > >>> > > > >> this.context =
> > >>> > > > >>
> HadoopUtils.instantiateTaskAttemptContext(this.configuration,
> > >>> > > > >> taskAttemptID);
> > >>> > > > >> } catch (Exception e) {
> > >>> > > > >> throw new RuntimeException(e);
> > >>> > > > >> }
> > >>> > > > >> final HFileOutputFormat2 outFormat = new
> HFileOutputFormat2();
> > >>> > > > >> try {
> > >>> > > > >> this.writer = outFormat.getRecordWriter(this.context);
> > >>> > > > >> } catch (InterruptedException iex) {
> > >>> > > > >> throw new IOException("Opening the writer was
interrupted.",
> > >>> iex);
> > >>> > > > >> }
> > >>> > > > >> }
> > >>> > > > >>
> > >>> > > > >> But I'm not sure about how to pass the JobConf
to the class,
> > if
> > >>> to
> > >>> > > merge
> > >>> > > > >> config fileas, where HFileOutputFormat2 writes
the data and
> > how
> > >>> to
> > >>> > > > >> implement the public void writeRecord(Record
record) API.
> > >>> > > > >> Could I do a little chat off the mailing list
with the
> > >>> implementor
> > >>> > of
> > >>> > > > >> this extension?
> > >>> > > > >>
> > >>> > > > >> On Mon, Nov 3, 2014 at 11:51 AM, Fabian Hueske
<
> > >>> fhueske@apache.org>
> > >>> > > > >> wrote:
> > >>> > > > >>
> > >>> > > > >>> Hi Flavio
> > >>> > > > >>>
> > >>> > > > >>> let me try to answer your last question
on the user's list
> > (to
> > >>> the
> > >>> > > best
> > >>> > > > >>> of
> > >>> > > > >>> my HBase knowledge).
> > >>> > > > >>> "I just wanted to known if and how regiom
splitting is
> > >>> handled. Can
> > >>> > > you
> > >>> > > > >>> explain me in detail how Flink and HBase
works?what is not
> > >>> fully
> > >>> > > clear
> > >>> > > > to
> > >>> > > > >>> me is when computation is done by region
servers and when
> > data
> > >>> > start
> > >>> > > > flow
> > >>> > > > >>> to a Flink worker (that in ky test job
is only my pc) and
> how
> > >>> ro
> > >>> > > > >>> undertsand
> > >>> > > > >>> better the important logged info to understand
if my job is
> > >>> > > performing
> > >>> > > > >>> well"
> > >>> > > > >>>
> > >>> > > > >>> HBase partitions its tables into so called
"regions" of
> keys
> > >>> and
> > >>> > > stores
> > >>> > > > >>> the
> > >>> > > > >>> regions distributed in the cluster using
HDFS. I think an
> > HBase
> > >>> > > region
> > >>> > > > >>> can
> > >>> > > > >>> be thought of as a HDFS block. To make
reading an HBase
> table
> > >>> > > > efficient,
> > >>> > > > >>> region reads should be locally done, i.e.,
an InputFormat
> > >>> should
> > >>> > > > >>> primarily
> > >>> > > > >>> read region that are stored on the same
machine as the IF
> is
> > >>> > running
> > >>> > > > on.
> > >>> > > > >>> Flink's InputSplits partition the HBase
input by regions
> and
> > >>> add
> > >>> > > > >>> information about the storage location
of the region.
> During
> > >>> > > execution,
> > >>> > > > >>> input splits are assigned to InputFormats
that can do local
> > >>> reads.
> > >>> > > > >>>
> > >>> > > > >>> Best, Fabian
> > >>> > > > >>>
> > >>> > > > >>> 2014-11-03 11:13 GMT+01:00 Stephan Ewen
<sewen@apache.org
> >:
> > >>> > > > >>>
> > >>> > > > >>> > Hi!
> > >>> > > > >>> >
> > >>> > > > >>> > The way of passing parameters through
the configuration
> is
> > >>> very
> > >>> > old
> > >>> > > > >>> (the
> > >>> > > > >>> > original HBase format dated back to
that time). I would
> > >>> simply
> > >>> > make
> > >>> > > > the
> > >>> > > > >>> > HBase format take those parameters
through the
> constructor.
> > >>> > > > >>> >
> > >>> > > > >>> > Greetings,
> > >>> > > > >>> > Stephan
> > >>> > > > >>> >
> > >>> > > > >>> >
> > >>> > > > >>> > On Mon, Nov 3, 2014 at 10:59 AM, Flavio
Pompermaier <
> > >>> > > > >>> pompermaier@okkam.it>
> > >>> > > > >>> > wrote:
> > >>> > > > >>> >
> > >>> > > > >>> > > The problem is that I also removed
the
> > >>> GenericTableOutputFormat
> > >>> > > > >>> because
> > >>> > > > >>> > > there is an incompatibility between
hadoop1 and hadoop2
> > for
> > >>> > class
> > >>> > > > >>> > > TaskAttemptContext and TaskAttemptContextImpl..
> > >>> > > > >>> > > then it would be nice if the
user doesn't have to worry
> > >>> about
> > >>> > > > passing
> > >>> > > > >>> > > pact.hbase.jtkey and pact.job.id
parameters..
> > >>> > > > >>> > > I think it is probably a good
idea to remove hadoop1
> > >>> > > compatibility
> > >>> > > > >>> and
> > >>> > > > >>> > keep
> > >>> > > > >>> > > enable HBase addon only for hadoop2
(as before) and
> > decide
> > >>> how
> > >>> > to
> > >>> > > > >>> mange
> > >>> > > > >>> > > those 2 parameters..
> > >>> > > > >>> > >
> > >>> > > > >>> > > On Mon, Nov 3, 2014 at 10:19
AM, Stephan Ewen <
> > >>> > sewen@apache.org>
> > >>> > > > >>> wrote:
> > >>> > > > >>> > >
> > >>> > > > >>> > > > It is fine to remove it,
in my opinion.
> > >>> > > > >>> > > >
> > >>> > > > >>> > > > On Mon, Nov 3, 2014 at 10:11
AM, Flavio Pompermaier <
> > >>> > > > >>> > > pompermaier@okkam.it>
> > >>> > > > >>> > > > wrote:
> > >>> > > > >>> > > >
> > >>> > > > >>> > > > > That is one class I
removed because it was using
> the
> > >>> > > deprecated
> > >>> > > > >>> API
> > >>> > > > >>> > > > > GenericDataSink..I
can restore them but the it will
> > be
> > >>> a
> > >>> > good
> > >>> > > > >>> idea to
> > >>> > > > >>> > > > > remove those warning
(also because from what I
> > >>> understood
> > >>> > the
> > >>> > > > >>> Record
> > >>> > > > >>> > > APIs
> > >>> > > > >>> > > > > are going to be removed).
> > >>> > > > >>> > > > >
> > >>> > > > >>> > > > > On Mon, Nov 3, 2014
at 9:51 AM, Fabian Hueske <
> > >>> > > > >>> fhueske@apache.org>
> > >>> > > > >>> > > > wrote:
> > >>> > > > >>> > > > >
> > >>> > > > >>> > > > > > I'm not familiar
with the HBase connector code,
> but
> > >>> are
> > >>> > you
> > >>> > > > >>> maybe
> > >>> > > > >>> > > > looking
> > >>> > > > >>> > > > > > for the GenericTableOutputFormat?
> > >>> > > > >>> > > > > >
> > >>> > > > >>> > > > > > 2014-11-03 9:44
GMT+01:00 Flavio Pompermaier <
> > >>> > > > >>> pompermaier@okkam.it
> > >>> > > > >>> > >:
> > >>> > > > >>> > > > > >
> > >>> > > > >>> > > > > > > | was trying
to modify the example setting
> > >>> > > > hbaseDs.output(new
> > >>> > > > >>> > > > > > > HBaseOutputFormat());
but I can't see any
> > >>> > > HBaseOutputFormat
> > >>> > > > >>> > > > > class..maybe
> > >>> > > > >>> > > > > > we
> > >>> > > > >>> > > > > > > shall use
another class?
> > >>> > > > >>> > > > > > >
> > >>> > > > >>> > > > > > > On Mon, Nov
3, 2014 at 9:39 AM, Flavio
> > Pompermaier
> > >>> <
> > >>> > > > >>> > > > > pompermaier@okkam.it
> > >>> > > > >>> > > > > > >
> > >>> > > > >>> > > > > > > wrote:
> > >>> > > > >>> > > > > > >
> > >>> > > > >>> > > > > > > > Maybe
that's something I could add to the
> HBase
> > >>> > example
> > >>> > > > and
> > >>> > > > >>> > that
> > >>> > > > >>> > > > > could
> > >>> > > > >>> > > > > > be
> > >>> > > > >>> > > > > > > > better
documented in the Wiki.
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > > Since
we're talking about the wiki..I was
> > >>> looking at
> > >>> > > the
> > >>> > > > >>> Java
> > >>> > > > >>> > > API (
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > >
> > >>> > > > >>> > > > > >
> > >>> > > > >>> > > > >
> > >>> > > > >>> > > >
> > >>> > > > >>> > >
> > >>> > > > >>> >
> > >>> > > > >>>
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
> http://flink.incubator.apache.org/docs/0.6-incubating/java_api_guide.html
> > >>> > > > >>> )
> > >>> > > > >>> > > > > > > > and
the link to the KMeans example is not
> > working
> > >>> > > (where
> > >>> > > > it
> > >>> > > > >>> > says
> > >>> > > > >>> > > > For
> > >>> > > > >>> > > > > a
> > >>> > > > >>> > > > > > > > complete
example program, have a look at
> KMeans
> > >>> > > > Algorithm).
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > > Best,
> > >>> > > > >>> > > > > > > > Flavio
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > > On Mon,
Nov 3, 2014 at 9:12 AM, Flavio
> > >>> Pompermaier <
> > >>> > > > >>> > > > > > pompermaier@okkam.it
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > > wrote:
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > >>
Ah ok, perfect! That was the reason why I
> > >>> removed it
> > >>> > > :)
> > >>> > > > >>> > > > > > > >>
> > >>> > > > >>> > > > > > > >>
On Mon, Nov 3, 2014 at 9:10 AM, Stephan
> Ewen <
> > >>> > > > >>> > sewen@apache.org>
> > >>> > > > >>> > > > > > wrote:
> > >>> > > > >>> > > > > > > >>
> > >>> > > > >>> > > > > > > >>>
You do not really need a HBase data sink.
> You
> > >>> can
> > >>> > > call
> > >>> > > > >>> > > > > > > >>>
"DataSet.output(new
> > >>> > > > >>> > > > > > > >>>
HBaseOutputFormat())"
> > >>> > > > >>> > > > > > > >>>
> > >>> > > > >>> > > > > > > >>>
Stephan
> > >>> > > > >>> > > > > > > >>>
Am 02.11.2014 23:05 schrieb "Flavio
> > >>> Pompermaier" <
> > >>> > > > >>> > > > > > pompermaier@okkam.it
> > >>> > > > >>> > > > > > > >:
> > >>> > > > >>> > > > > > > >>>
> > >>> > > > >>> > > > > > > >>>
> Just one last thing..I removed the
> > >>> HbaseDataSink
> > >>> > > > >>> because I
> > >>> > > > >>> > > > think
> > >>> > > > >>> > > > > it
> > >>> > > > >>> > > > > > > was
> > >>> > > > >>> > > > > > > >>>
> using the old APIs..can someone help me
> in
> > >>> > updating
> > >>> > > > >>> that
> > >>> > > > >>> > > class?
> > >>> > > > >>> > > > > > > >>>
>
> > >>> > > > >>> > > > > > > >>>
> On Sun, Nov 2, 2014 at 10:55 AM, Flavio
> > >>> > > Pompermaier <
> > >>> > > > >>> > > > > > > >>>
pompermaier@okkam.it>
> > >>> > > > >>> > > > > > > >>>
> wrote:
> > >>> > > > >>> > > > > > > >>>
>
> > >>> > > > >>> > > > > > > >>>
> > Indeed this time the build has been
> > >>> successful
> > >>> > :)
> > >>> > > > >>> > > > > > > >>>
> >
> > >>> > > > >>> > > > > > > >>>
> > On Sun, Nov 2, 2014 at 10:29 AM, Fabian
> > >>> Hueske
> > >>> > <
> > >>> > > > >>> > > > > > fhueske@apache.org
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > > >>>
> wrote:
> > >>> > > > >>> > > > > > > >>>
> >
> > >>> > > > >>> > > > > > > >>>
> >> You can also setup Travis to build
> your
> > >>> own
> > >>> > > Github
> > >>> > > > >>> > > > > repositories
> > >>> > > > >>> > > > > > by
> > >>> > > > >>> > > > > > > >>>
> linking
> > >>> > > > >>> > > > > > > >>>
> >> it to your Github account. That way
> > >>> Travis can
> > >>> > > > >>> build all
> > >>> > > > >>> > > > your
> > >>> > > > >>> > > > > > > >>>
branches
> > >>> > > > >>> > > > > > > >>>
> >> (and
> > >>> > > > >>> > > > > > > >>>
> >> you can also trigger rebuilds if
> > something
> > >>> > > fails).
> > >>> > > > >>> > > > > > > >>>
> >> Not sure if we can manually trigger
> > >>> retrigger
> > >>> > > > >>> builds on
> > >>> > > > >>> > > the
> > >>> > > > >>> > > > > > Apache
> > >>> > > > >>> > > > > > > >>>
> >> repository.
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >> Support for Hadoop 1 and 2 is indeed a
> > >>> very
> > >>> > good
> > >>> > > > >>> > addition
> > >>> > > > >>> > > > :-)
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >> For the discusion about the PR
> itself, I
> > >>> would
> > >>> > > > need
> > >>> > > > >>> a
> > >>> > > > >>> > bit
> > >>> > > > >>> > > > more
> > >>> > > > >>> > > > > > > time
> > >>> > > > >>> > > > > > > >>>
to
> > >>> > > > >>> > > > > > > >>>
> >> become more familiar with HBase. I do
> > >>> also not
> > >>> > > > have
> > >>> > > > >>> a
> > >>> > > > >>> > > HBase
> > >>> > > > >>> > > > > > setup
> > >>> > > > >>> > > > > > > >>>
> >> available
> > >>> > > > >>> > > > > > > >>>
> >> here.
> > >>> > > > >>> > > > > > > >>>
> >> Maybe somebody else of the community
> who
> > >>> was
> > >>> > > > >>> involved
> > >>> > > > >>> > > with a
> > >>> > > > >>> > > > > > > >>>
previous
> > >>> > > > >>> > > > > > > >>>
> >> version of the HBase connector could
> > >>> comment
> > >>> > on
> > >>> > > > your
> > >>> > > > >>> > > > question.
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >> Best, Fabian
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >> 2014-11-02 9:57 GMT+01:00 Flavio
> > >>> Pompermaier <
> > >>> > > > >>> > > > > > > pompermaier@okkam.it
> > >>> > > > >>> > > > > > > >>>
>:
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >> > As suggestes by Fabian I moved the
> > >>> > discussion
> > >>> > > on
> > >>> > > > >>> this
> > >>> > > > >>> > > > > mailing
> > >>> > > > >>> > > > > > > >>>
list.
> > >>> > > > >>> > > > > > > >>>
> >> >
> > >>> > > > >>> > > > > > > >>>
> >> > I think that what is still to be
> > >>> discussed
> > >>> > is
> > >>> > > > >>> how  to
> > >>> > > > >>> > > > > > retrigger
> > >>> > > > >>> > > > > > > >>>
the
> > >>> > > > >>> > > > > > > >>>
> >> build
> > >>> > > > >>> > > > > > > >>>
> >> > on Travis (I don't have an account)
> > and
> > >>> if
> > >>> > the
> > >>> > > > PR
> > >>> > > > >>> can
> > >>> > > > >>> > be
> > >>> > > > >>> > > > > > > >>>
integrated.
> > >>> > > > >>> > > > > > > >>>
> >> >
> > >>> > > > >>> > > > > > > >>>
> >> > Maybe what I can do is to move the
> > HBase
> > >>> > > example
> > >>> > > > >>> in
> > >>> > > > >>> > the
> > >>> > > > >>> > > > test
> > >>> > > > >>> > > > > > > >>>
package
> > >>> > > > >>> > > > > > > >>>
> >> (right
> > >>> > > > >>> > > > > > > >>>
> >> > now I left it in the main folder) so
> > it
> > >>> will
> > >>> > > > force
> > >>> > > > >>> > > Travis
> > >>> > > > >>> > > > to
> > >>> > > > >>> > > > > > > >>>
rebuild.
> > >>> > > > >>> > > > > > > >>>
> >> > I'll do it within a couple of hours.
> > >>> > > > >>> > > > > > > >>>
> >> >
> > >>> > > > >>> > > > > > > >>>
> >> > Another thing I forgot to say is
> that
> > >>> the
> > >>> > > hbase
> > >>> > > > >>> > > extension
> > >>> > > > >>> > > > is
> > >>> > > > >>> > > > > > now
> > >>> > > > >>> > > > > > > >>>
> >> compatible
> > >>> > > > >>> > > > > > > >>>
> >> > with both hadoop 1 and 2.
> > >>> > > > >>> > > > > > > >>>
> >> >
> > >>> > > > >>> > > > > > > >>>
> >> > Best,
> > >>> > > > >>> > > > > > > >>>
> >> > Flavio
> > >>> > > > >>> > > > > > > >>>
> >>
> > >>> > > > >>> > > > > > > >>>
> >
> > >>> > > > >>> > > > > > > >>>
>
> > >>> > > > >>> > > > > > > >>>
> > >>> > > > >>> > > > > > > >>
> > >>> > > > >>> > > > > > > >
> > >>> > > > >>> > > > > > >
> > >>> > > > >>> > > > > >
> > >>> > > > >>> > > > >
> > >>> > > > >>> > > >
> > >>> > > > >>> > >
> > >>> > > > >>> >
> > >>> > > > >>>
> > >>> > > > >>
> > >>> > > > >>
> > >>> > > > >>
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> > >>
> > >
> > >

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message