flex-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ftho...@apache.org
Subject [11/27] FLEX-34343: Remove the fdbworkers directory before to merge to the develop branch
Date Thu, 29 May 2014 15:30:56 GMT
http://git-wip-us.apache.org/repos/asf/flex-sdk/blob/de3e1682/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fi.properties
----------------------------------------------------------------------
diff --git a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fi.properties b/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fi.properties
deleted file mode 100644
index fa39036..0000000
--- a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fi.properties
+++ /dev/null
@@ -1,253 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Translation:
-#
-# In this file, a couple of messages are split across multiple lines.  The main
-# reason for that is that fdb is a command-line program, so we prefer to keep
-# messages at less than 80 characters so that they fit in a typical command
-# window.  When translating strings, you can either keep the line breaks in the
-# same places, or move them, or even remove them altogether if a message will
-# fit on a single line.
-
-defaultBuildName=kehitys
-about=Apache fdb (Flash Player Debugger) [versio ${build}]
-copyright=Copyright 2013 The Apache Software Foundation. All rights reserved.
-noResponseException=Soitin ei vastannut komentoon odotetulla tavalla. Komento keskeytettiin.
-notSuspendedException=Komentoa ei voi antaa, kun soitin on k\u00e4ynniss\u00e4
-illegalStateException=Komento ei kelpaa ilman istuntoa.
-illegalMonitorStateException=Komento ei kelpaa k\u00e4ynniss\u00e4 olevassa soittimessa.  Keskeyt\u00e4 se painamalla 'Enter'.
-playerDidNotStop=Soitin ei pys\u00e4htynyt odotetusti.  Pys\u00e4yt\u00e4 se painamalla 'Enter'.
-noSuchElementException=Komento odotti ainakin yht\u00e4 lis\u00e4argumenttia.
-numberFormatException=Komentoargumentti oli merkkijono, kun odotettiin kokonaislukua.
-socketException=Toinen Flash-virheenkorjaus on luultavasti k\u00e4ynniss\u00e4. Sulje se. Tiedot: '${message}'.
-versionException=Komentoa ei tueta t\u00e4ss\u00e4 kontekstissa.
-unexpectedError=Odottamaton virhe komennon k\u00e4sittelemisess\u00e4.
-stackTraceFollows=Diagnostisista syist\u00e4 seuraa pinon j\u00e4ljitys: 
-sessionEndedAbruptly=Istunto p\u00e4\u00e4ttyi \u00e4killisesti.
-noUriReceived=Soittimelta ei vastaanotettu URI:t\u00e4
-noSourceFilesFound=L\u00e4hdetiedostoja ei l\u00f6ytynyt
-unknownBreakpointLocation=<tuntematon>
-unknownFilename=<tuntematon>
-inFunctionAt=kohteessa ${functionName}() / 
-inSwf=kohteessa ${swf}
-nonRestorable=; Ei palautettavissa edellisest\u00e4 istunnosta
-sourceDirectoriesSearched=Haetut l\u00e4hdehakemistot:
-attemptingToSuspend=Yritet\u00e4\u00e4n keskeytt\u00e4\u00e4 soittimen suorittamista\u2026
-playerStopped=Soitin on pys\u00e4ytetty
-playerRunning=Soitin on k\u00e4ynniss\u00e4
-suspendReason_Unknown=Unknown
-suspendReason_HitBreakpoint=Breakpoint
-suspendReason_HitWatchpoint=Watch
-suspendReason_ProgramThrewException=Fault
-suspendReason_StopRequest=StopRequest
-suspendReason_ProgramFinishedStepping=Step
-suspendReason_HaltOpcode=HaltOpcode
-suspendReason_ScriptHasLoadedIntoFlashPlayer=ScriptLoaded
-noStackAvailable=Ei pinoa k\u00e4ytett\u00e4viss\u00e4
-atFilename=kohteessa 
-noVariables=ei muuttujia
-noArguments=ei argumenttej\u00e4
-notInValidFrame=Ei kelvollisessa kehyksess\u00e4.  Palaa nykyiseen komennolla 'frame'.
-noLocals=ei paikallisia
-noScopeChain=ei vaikutusalueketjua (scope chain)
-noActiveSession=Ei aktiivista istuntoa
-runWillLaunchUri=run' k\u00e4ynnist\u00e4\u00e4 kohteen ${uri}
-targetUnknown=Tuntematon kohde
-noSWFs=ei SWF:\u00e4\u00e4.
-unrecognizedFault=Tunnistamaton virhe.
-noFunctionsFound=Toimintoja ei l\u00f6ytynyt
-functionListBeingPrepared=Toimintoluetteloa valmistellaan taustalla, yrit\u00e4 my\u00f6hemmin uudelleen.
-functionsInSourceFile=Toiminnot kohteessa ${sourceFile}
-breakpointNotYetResolved=(ei viel\u00e4 ratkaistu)
-breakpointAmbiguous=(ep\u00e4selv\u00e4)
-breakpointNoCode=(m\u00e4\u00e4ritetyll\u00e4 rivill\u00e4 ei ole suoritettavaa koodia)
-sessionTerminated=Soittimen istunto p\u00e4\u00e4tettiin
-additionalCodeLoaded=ActionScript-lis\u00e4koodi ladattiin SWF:st\u00e4 tai kehyksest\u00e4.\nJos haluat n\u00e4hd\u00e4 kaikki ladatut tiedostot, kirjoita 'info files'.
-setAdditionalBreakpoints=M\u00e4\u00e4rit\u00e4 haluamasi lis\u00e4keskeytyskohdat ja kirjoita 'continue'.
-fixBreakpoints=Korjaa tai poista virheelliset keskeytyskohdat ja kirjoita 'continue'.
-executionHalted=Suorittaminen keskeytettiin
-hitBreakpoint=Keskeytyskohta ${breakpointNumber}
-haltedInFunction=${reasonForHalting}, ${functionName}() kohteessa ${fileAndLine}
-haltedInFile=${reasonForHalting}, ${fileAndLine}
-linePrefixWhenDisplayingConsoleError=[Virhe]
-linePrefixWhenDisplayingFault=[Virhe]
-linePrefixWhenSwfLoaded=[SWF]
-linePrefixWhenSwfUnloaded=[UnloadSWF]
-informationAboutFault=, tietoja=
-sizeAfterDecompression=${size} tavua purkamisen j\u00e4lkeen
-breakpointNotPropagated=VAROITUS:  keskeytyskohtaa ${breakpointNumber} ei ole v\u00e4litetty kaikille swfs:lle.\nTyhjenn\u00e4 se ja m\u00e4\u00e4rit\u00e4 se uudelleen.
-playerAlreadyRunning=Soitin on jo k\u00e4ynniss\u00e4, ei tarvetta jatkaa.
-doYouWantToHalt=Haluatko yritt\u00e4\u00e4 suorittamisen pys\u00e4ytt\u00e4mist\u00e4?
-debugInfoBeingLoaded=virheenkorjaustietoja ladataan
-attemptingToHalt=Yritet\u00e4\u00e4n keskeytt\u00e4\u00e4.\nKokeile liikauttaa soitinta (esim. painamalla painiketta)
-couldNotHalt=Ei voitu keskeytt\u00e4\u00e4, kohdetta ActionScript ei ole k\u00e4ynniss\u00e4.
-escapingFromDebuggerPendingLoop=Poistutaan viankorjauksen odotussilmukasta; asetus $nowaiting = 1
-continuingDueToError=Jatketaan virheen '${error}' takia
-currentLocationUnknown=nykyinen sijainti tuntematon
-cannotStep=Et voi jatkaa nyt.  M\u00e4\u00e4rit\u00e4 keskeytyskohdat ja kirjoita 'continue'.
-abortingStep=Soitin ei palannut ajoissa, loput ${count} vaihetta keskeytet\u00e4\u00e4n
-finishCommandNotMeaningfulOnOutermostFrame=finish' ei tarkoituksenmukainen uloimmalle kehykselle
-finishCommandNotMeaningfulWithoutStack=finish' ei tarkoituksenmukainen ilman pinoa
-noBreakpointNumber=Ei keskeytyskohdan numeroa ${breakpointNumber}
-badBreakpointNumber=varoitus: virheellinen keskeytyskohdan numero kohdassa '${token}' tai sen l\u00e4hell\u00e4
-commandFailed=Komento ep\u00e4onnistui.
-createdBreakpoint=Keskeytyskohta ${breakpointNumber}: tiedosto ${file}, rivi ${line}
-createdBreakpointWithOffset=Keskeytyskohta ${breakpointNumber} osoitteessa ${offset}: tiedosto ${file}, rivi ${line}
-breakpointCreatedButNotYetResolved=Keskeytyskohta ${breakpointNumber} luotiin, mutta sit\u00e4 ei ole viel\u00e4 ratkaistu.\nKeskeytyskohta ratkaistaan, kun sit\u00e4 vastaava tiedosto tai toiminto on ladattu.
-fileNumber=tiedosto #${fileNumber}
-breakpointNotSetNoCode=Keskeytyskohtaa ei m\u00e4\u00e4ritetty, ei suoritettavaa koodia rivill\u00e4 ${line} / ${filename}
-breakpointLocationUnknown=Keskeytyskohdan sijainti tuntematon.
-breakpointNotCleared=Keskeytyskohtaa ei tyhjennetty.
-attemptingToResolve=Yritet\u00e4\u00e4n ratkaista keskeytyskohtaa ${breakpointNumber}, lauseketta "${expression}":
-noExecutableCode=M\u00e4\u00e4ritetyll\u00e4 rivill\u00e4 ei ole suoritettavaa koodia.
-resolvedBreakpointToFunction=Keskeytyskohta ${breakpointNumber} ratkaistiin kohteeseen ${functionName}() kohdassa ${file}:${line}
-resolvedBreakpointToFile=Keskeytyskohta ${breakpointNumber} ratkaistiin kohteeseen ${file}:${line}
-setCommand=M\u00e4\u00e4ritetty komento vaatii muuttujan, jota seuraa lauseke
-missingOperator=Lausekkeen pit\u00e4\u00e4 sis\u00e4lt\u00e4\u00e4 operaattori '${operator}'.
-noSideEffectsAllowed=Lausekkeella ei saa olla sivuvaikutuksia, kuten m\u00e4\u00e4rityksi\u00e4.
-couldNotEvaluate=Lauseketta ei voitu arvioida.
-commandHistoryIsEmpty=Historia on tyhj\u00e4
-historyHasNotReached=Historiassa ei ole viel\u00e4 saavutettu numeroa ${number}
-variableUnknown=Muuttuja ${variable} on tuntematon
-expressionCouldNotBeParsed=Lauseketta ei voitu j\u00e4sent\u00e4\u00e4 oikein:
-couldNotConvertToNumber=Ei voitu muuntaa numeroon: ${value}
-commandsLimitedToSpecifiedSwf=Komennot rajoitettu l\u00e4hdetiedostoihin kohteesta ${swf}
-commandsApplyToAllSwfs=L\u00e4hdetiedostot kaikista swfs:st\u00e4 k\u00e4ytett\u00e4viss\u00e4 komennoissa.
-notValidSwf=${swf} ei ole kelvollinen SWF.
-frameDoesNotExist=Kehyst\u00e4 '${frameNumber}' ei ole.
-notANumber=${token}' ei ole numero.
-expectedLineNumber=Odotettu rivinumero: ${token}
-expectedFileNumber=Odotettu tiedostonumero: ${token}
-noSourceFileWithSpecifiedName=Ei l\u00e4hdetiedostoa nimelt\u00e4 '${name}'.
-noFunctionWithSpecifiedName=Ei toimintoa nimell\u00e4 '${name}'.
-ambiguousMatchingFilenames=Ep\u00e4selv\u00e4t vastaavat tiedostonimet:
-ambiguousMatchingFunctionNames=Ep\u00e4selv\u00e4t vastaavat toimintojen nimet:
-functionInFile=${functionName} tiedostossa ${filename}
-expectedFile=Odotettu tiedostonimi tai tiedostonumero, joka alkaa #: ${token}
-noSuchFileOrFunction=Ei tiedostoa tai toimintoa nimelt\u00e4 '${token}'.
-localVariable=paikallinen
-functionArgumentVariable=argumentti
-mustBeOnlyOneVariable=Lauseke saa sis\u00e4lt\u00e4\u00e4 vain yhden muuttujan
-lineJunk=Roskaa rivin m\u00e4\u00e4ritysten lopussa
-sourceFileNotFound=L\u00e4hdetiedostoa ei l\u00f6ytynyt.  K\u00e4yt\u00e4 "directory"-komentoa sen\nsijainnin m\u00e4\u00e4ritt\u00e4miseen t\u00e4ll\u00e4 koneella.  Kirjoita "help directory", niin n\u00e4et t\u00e4rkeit\u00e4 tietoja siit\u00e4,\nmiten hakemisto m\u00e4\u00e4ritet\u00e4\u00e4n pakkauksessa oleville l\u00e4hdetiedostoille.
-lineNumberOutOfRange=Rivinumero ${line} on alueen ulkopuolella, tiedostolla ${filename} on ${total} rivi\u00e4
-noFilesFound=Tiedostoja ei l\u00f6ytynyt
-sessionInProgress=Istunto on jo k\u00e4ynniss\u00e4
-waitingForPlayerToConnect=Odotetaan, ett\u00e4 soitin muodostaa yhteyden
-waitingToConnectToPlayer=Yhteytt\u00e4 Playeriin yritet\u00e4\u00e4n muodostaa
-launchingWithUrl=Yritet\u00e4\u00e4n k\u00e4ynnist\u00e4\u00e4 soitin ja yhdist\u00e4\u00e4 se URL:n avulla
-playerConnectedSessionStarting=Soitin yhdistetty. Istunto k\u00e4ynnistyy.
-setBreakpointsThenResume=M\u00e4\u00e4rit\u00e4 keskeytyskohdat ja jatka istuntoa kirjoittamalla 'continue'.
-warningNotAllCommandsSupported=VAROITUS: K\u00e4ytt\u00e4m\u00e4si soitin ei tue kaikkia fdb-komentoja.
-fileDoesNotExist=Tiedostoa ei l\u00f6ytynyt: ${uri}
-failedToConnect=Yhteytt\u00e4 ei voitu muodostaa, istunnon aikakatkaisu.\nVarmista, ett\u00e4:\n  1. kokosit Flash-elokuvan viankorjaus k\u00e4yt\u00f6ss\u00e4 ja ett\u00e4\n  2. suoritat Flash-soittimen viankorjausversiota.
-manuallyLaunchPlayer=Kirjoita 'run' ja k\u00e4ynnist\u00e4 soitin manuaalisesti.
-sourceCommandRequiresPath=source'-komento vaatii tiedoston polkunimen l\u00e4hteeseen.
-fileNotFound=${filename}: Tiedostoa tai kansiota ei ole.
-argumentRequired=Vaaditaan argumentti (vian k\u00e4sittelemiseen).
-breakpointNotChanged=Keskeytyskohta ei muuttunut.
-badWatchpointNumber=Virheellinen katselukohdan numero.
-couldNotResolveExpression=Lauseketta ei voitu ratkaista muuttujaksi.
-notAllBreakpointsEnabled=Kaikki keskeytyskohdat eiv\u00e4t ole k\u00e4yt\u00f6ss\u00e4
-programNotBeingRun=Ohjelma ei ole k\u00e4ynniss\u00e4.
-commandNotValidUntilPlayerSuspended=Komento ei kelpaa, ennen kuin soittimen suoritus on keskeytetty. Kokeile kirjoittaa 'halt'-komento.
-noHelpFileFound=Ohjetiedostoa (fdbhelp*.txt) ei l\u00f6ytynyt.
-invalidTargetFault=ActionSetTarget-ohjeen kohdenimi ei kelpaa
-recursionLimitFault=Rekursiorajan yl\u00e4raja saavutettu
-invalidWithFault=Kohteen 'with' kohde on lause, ei objekti
-protoLimitFault=Prototyyppiketjun haussa tuli raja vastaan
-invalidUrlFault=URL:n avaaminen ep\u00e4onnistui
-exceptionFault=Palautettiin k\u00e4ytt\u00e4j\u00e4poikkeus
-stackUnderflowFault=Tapahtui pinon alivuoto
-divideByZeroFault=Virhe: jaettu nollalla
-scriptTimeoutFault=ActionScript-koodi ei edisty
-errorWhileProcessingFile=Tapahtui virhe k\u00e4sitelt\u00e4ess\u00e4 tiedostoa (${exceptionMessage})
-unrecognizedAction=Tuntematon toiminto ${action}
-typeCommandsForBreakpoint=Kirjoita komennot, jotka suoritetaan, kun t\u00f6rm\u00e4t\u00e4\u00e4n keskeytyskohtaan ${breakpointNumber}, yksi rivi\u00e4 kohti.\nP\u00e4\u00e4t\u00e4 riviin, jolla lukee vain 'end'.
-breakpointNowUnconditional=Keskeytyskohta ${breakpointNumber} on nyt ehdoton.
-watchpointCouldNotBeSet=Lausekkeelle '${expression}' ei voitu m\u00e4\u00e4ritt\u00e4\u00e4 katselukohtaa
-
-changedWatchpointMode=Katselukohta ${watchpointNumber} lausekkeessa '${expression}' on nyt ${watchpointMode}
-# the following three strings are inserted into the above 'changedWatchpointMode' string at the ${watchpontMode} location
-watchpointMode_read=luku
-watchpointMode_write=kirjoitus
-watchpointMode_readWrite=luku ja kirjoitus
-
-createdWatchpoint=Katselukohta ${watchpointNumber} m\u00e4\u00e4ritetty lausekkeessa '${expression}'
-couldNotFindWatchpoint=Muuttujan '${variable}' katselua ei l\u00f6ytynyt, tai se on poistettu.
-noDisplayNumber=Ei n\u00e4yt\u00f6n numeroa ${displayNumber}
-badDisplayNumber=varoitus: virheellinen n\u00e4yt\u00f6n numero kohdassa '${token}' tai sen l\u00e4hell\u00e4
-breakpointLocationNoLongerExists=L\u00e4hdetiedostoa ja rivinumeroa ei en\u00e4\u00e4 ole keskeytyskohdalle ${breakpointNumber}
-unknownCommand=Tuntematon komento '${command}', ohitetaan
-unknownSubcommand=Tuntematon ${commandCategory} komento '${command}', ohitetaan
-unknownEvent=Vastaanotettu tuntematon tapahtuma tyyppi\u00e4 '${type}', tiedot = ${info}
-problemWithConnection=Istunnon '${socketErrorMessage}' yhteysongelma. Istunto on todenn\u00e4k\u00f6isesti parasta poistaa.
-unexpectedErrorWithStackTrace=Odottamaton virhe komennon k\u00e4sittelemisess\u00e4.\nDiagnostisista syist\u00e4 seuraa pinon j\u00e4ljitys: 
-ambiguousCommand=Ep\u00e4selv\u00e4 komento '${input}':
-faultHasNoTableEntry=Virheell\u00e4 ${faultName} ei ole taulukkomerkint\u00e4\u00e4
-swfInfo=${swfName} - ${size} tavua purkamisen j\u00e4lkeen, ${scriptCount} komentosarjaa [#${min} - #${max}]${plus} ${moreInfo}, url on ${url}
-remainingSourceBeingLoaded=j\u00e4ljell\u00e4 olevaa l\u00e4hdett\u00e4 ladataan yh\u00e4
-
-# the following string is appended to the end of any question; tells the user what to type
-yesOrNoAppendedToAllQuestions=(k tai e) 
-# the following string is what character the user should to answer "yes" to a yes/no question
-singleCharacterUserTypesForYes=y
-# a bunch of questions:
-askDeleteAllBreakpoints=Poistetaanko kaikki keskeytyskohdat?
-askDeleteAllAutoDisplay=Poistetaanko kaikki automaattisen n\u00e4yt\u00f6n ilmaukset?
-askKillProgram=Haluatko poistaa ohjelman, josta korjataan virheit\u00e4?
-askProgramIsRunningExitAnyway=Ohjelma on k\u00e4ynniss\u00e4. Haluatko sulkea sen siit\u00e4 huolimatta?
-askReinitSourcePath=Alustetaanko l\u00e4hdepolku uudelleen tyhj\u00e4ksi?
-askExpressionContainsAssignment=Lauseke sis\u00e4lt\u00e4\u00e4 m\u00e4\u00e4rityksen. Haluatko jatkaa?
-# the following string is output if someone answers "no" to any of the above questions
-yesNoQueryNotConfirmed=Ei vahvistettu.
-stopOnlyIfConditionMet=pys\u00e4yt\u00e4 vain, jos tapahtuu ${breakpointCondition}
-breakpointAlreadyHit=keskeytyskohtaan on jo osuttu ${count} kertaa
-silentBreakpoint=hiljainen
-getterFunction=Get-funktio
-setterFunction=Set-funktio
-function=Toiminto
-unknownVariableType=<tuntematon>
-variableAttribute_dontEnumerate=\u00e4l\u00e4 luetteloi
-variableAttribute_readOnly=vain-luku
-variableAttribute_localVariable=paikallinen
-variableAttribute_functionArgument=argumentti
-variableAttribute_getterFunction=Get-funktio
-variableAttribute_setterFunction=Set-funktio
-variableAttribute_hasNamespace=omistaa nimitilan
-key16=Vastaanotetut viestit:
-key17=L\u00e4hetetyt viestit:
-key18=L\u00e4hdetiedostoja ei l\u00f6ytynyt
-key19=Toimintoja ei l\u00f6ytynyt
-key20=Toimintoluetteloa valmistellaan taustalla, yrit\u00e4 my\u00f6hemmin uudelleen.
-key21=--- Istunnon hallinnan ominaisuudet
-key22=--- Istunnon ominaisuudet
-stopped=Stopped
-key24=Soitin on k\u00e4ynniss\u00e4.
-key25=Keskeytystietoja ei l\u00f6ytynyt
-key26=Tuntematon muuttuja
-key27=Tuntemattomat l\u00e4hdetiedot, nykyinen sijainti purettiin
-key28=Roskaa rivin m\u00e4\u00e4ritysten lopussa
-key29=Tiedostolle ${arg3} ei l\u00f6ytyny swf:\u00e4\u00e4
-key30=Toimintoa ei l\u00f6ytynyt
-key31=---- N\u00e4ytet\u00e4\u00e4n ohitetut m\u00e4\u00e4ritt\u00e4m\u00e4tt\u00f6m\u00e4t ohjeet kohteessa 0x${arg4} ----
-key32=Rivinumero ${arg5} on alueen ulkopuolella, tiedostolla ${arg6} on ${arg7} rivi\u00e4
-key33=Tiedostoja ei l\u00f6ytynyt
-key34=Soitinta ei ole keskeytetty mihink\u00e4\u00e4n toimintoon.
-key35=kohteessa '${swfName}'
-atAddress=osoitteessa ${address}
-haltedDueToFault=virheen ${fault} takia

http://git-wip-us.apache.org/repos/asf/flex-sdk/blob/de3e1682/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fr.properties
----------------------------------------------------------------------
diff --git a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fr.properties b/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fr.properties
deleted file mode 100644
index 0c04985..0000000
--- a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_fr.properties
+++ /dev/null
@@ -1,263 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Translation:
-#
-# In this file, a couple of messages are split across multiple lines.  The main
-# reason for that is that fdb is a command-line program, so we prefer to keep
-# messages at less than 80 characters so that they fit in a typical command
-# window.  When translating strings, you can either keep the line breaks in the
-# same places, or move them, or even remove them altogether if a message will
-# fit on a single line.
-
-defaultBuildName=d\u00e9veloppement
-about=Apache fdb (Flash Player Debugger) [build ${build}]
-copyright=Copyright 2013 The Apache Software Foundation. Tous droits r\u00e9serv\u00e9s.
-noResponseException=Le lecteur n'a pas r\u00e9pondu \u00e0 la commande comme pr\u00e9vu ; commande annul\u00e9e.
-notSuspendedException=Impossible d'\u00e9mettre la commande lorsque le lecteur est en cours d'ex\u00e9cution
-illegalStateException=Commande incorrecte sans session.
-illegalMonitorStateException=La commande est incorrecte sur un lecteur en cours d'ex\u00e9cution. Appuyez sur la touche 'Entr\u00e9e' pour l'arr\u00eater
-playerDidNotStop=Le lecteur ne s'est pas arr\u00eat\u00e9 comme pr\u00e9vu. Appuyez sur la touche 'Entr\u00e9e' pour l'arr\u00eater
-noSuchElementException=La commande attendait au moins un argument suppl\u00e9mentaire.
-numberFormatException=L'argument de la command \u00e9tait une cha\u00eene alors qu'un entier \u00e9tait attendu.
-socketException=Un autre d\u00e9bogueur Flash est probablement en cours d'ex\u00e9cution ; veuillez le fermer. D\u00e9tails : '${message}'.
-versionException=Commande non prise en charge dans ce contexte.
-unexpectedError=Erreur inattendue lors du traitement de la commande.
-stackTraceFollows=Pour les diagnostics, la trace de la pile suit : 
-sessionEndedAbruptly=La session s'est termin\u00e9e brutalement.
-noUriReceived=Aucune URL re\u00e7ue du lecteur
-noSourceFilesFound=Aucun fichier source trouv\u00e9
-unknownBreakpointLocation=<inconnu>
-unknownFilename=<inconnu>
-inFunctionAt=dans ${functionName}() \u00e0 
-inSwf=dans ${swf}
-inWorker=Op\u00e9rateur ${worker}
-workerRunning=En cours d'ex\u00e9cution
-workerSuspended=Suspendu
-workerSelected=(Actif)
-mainThread=Thread principal\u00a0
-nonRestorable=; Aucun \u00e9l\u00e9ment \u00e0 restaurer de la session pr\u00e9c\u00e9dente
-sourceDirectoriesSearched=R\u00e9pertoires source dans lesquels rechercher :
-attemptingToSuspend=Tentative d'interruption de l'ex\u00e9cution du lecteur...
-playerStopped=Lecteur arr\u00eat\u00e9
-playerRunning=Lecteur en cours d'ex\u00e9cution
-suspendReason_Unknown=Unknown
-suspendReason_HitBreakpoint=Breakpoint
-suspendReason_HitWatchpoint=Watch
-suspendReason_ProgramThrewException=Fault
-suspendReason_StopRequest=StopRequest
-suspendReason_ProgramFinishedStepping=Step
-suspendReason_HaltOpcode=HaltOpcode
-suspendReason_ScriptHasLoadedIntoFlashPlayer=ScriptLoaded
-noStackAvailable=Aucune pile disponible
-atFilename=\u00e0 
-noVariables=aucune variable
-noArguments=Aucun argument
-notInValidFrame=Pas dans une image valide. Utilisez la commande 'frame' pour revenir \u00e0 l'image en cours.
-noLocals=aucune variable locale
-noScopeChain=aucune cha\u00eene d'\u00e9tendue
-noActiveSession=Aucune session active
-runWillLaunchUri=run' va lancer ${uri}
-targetUnknown=Cible inconnue
-noSWFs=aucun fichier SWF.
-unrecognizedFault=Erreur non reconnue
-noFunctionsFound=Aucune fonction trouv\u00e9e
-functionListBeingPrepared=La liste des fonctions est en cours de pr\u00e9paration en arri\u00e8re-plan ; r\u00e9essayez ult\u00e9rieurement.
-functionsInSourceFile=Fonctions de ${sourceFile}
-breakpointNotYetResolved=(pas encore r\u00e9solu)
-breakpointAmbiguous=(ambigu)
-breakpointNoCode=(pas de code ex\u00e9cutable sur la ligne sp\u00e9cifi\u00e9e)
-sessionTerminated=La session du lecteur s'est termin\u00e9e
-additionalCodeLoaded=Un code ActionScript suppl\u00e9mentaire a \u00e9t\u00e9 charg\u00e9 depuis un fichier SWF ou une image.\nPour voir tous les fichiers actuellement charg\u00e9s, tapez 'info files'.
-workerChanged=Op\u00e9rateur actif modifi\u00e9 en op\u00e9rateur
-workerNotFound=Aucun op\u00e9rateur trouv\u00e9 pour cet ID
-setAdditionalBreakpoints=D\u00e9finissez les points d'arr\u00eat suppl\u00e9mentaires voulus, puis tapez 'continue'.
-fixBreakpoints=Corrigez ou supprimez les points d'arr\u00eat incorrect, puis tapez 'continue'.
-executionHalted=Ex\u00e9cution arr\u00eat\u00e9e
-hitBreakpoint=Point d'arr\u00eat ${breakpointNumber}
-haltedInFunction=${reasonForHalting}, ${functionName}() sur ${fileAndLine}
-haltedInFile=${reasonForHalting}, ${fileAndLine}
-linePrefixWhenDisplayingConsoleError=[Error]
-linePrefixWhenDisplayingFault=[Fault]
-linePrefixWhenWorkerCreated=[WorkerCreate]
-linePrefixWhenWorkerExit=[WorkerDestroy]
-linePrefixWhenSwfLoaded=[SWF]
-linePrefixWhenSwfUnloaded=[UnloadSWF]
-informationAboutFault=, information=
-sizeAfterDecompression=${size} octets apr\u00e8s la d\u00e9compression
-breakpointNotPropagated=AVERTISSEMENT : le point d'arr\u00eat ${breakpointNumber} n'est pas propag\u00e9 \u00e0 tous les WSFs.\nVous devez l'effacer et le red\u00e9finir.
-playerAlreadyRunning=Le lecteur est d\u00e9j\u00e0 en cours d'ex\u00e9cution, il est inutile de le relancer.
-doYouWantToHalt=Voulez-vous essayer d'arr\u00eater l'ex\u00e9cution ?
-debugInfoBeingLoaded=informations de d\u00e9bogage en cours de chargement
-attemptingToHalt=Tentative d'arr\u00eat.\nPour aider, essayez de repositionner le lecteur (en appuyant sur un bouton)
-couldNotHalt=Arr\u00eat impossible, aucun ActionScript n'est en cours d'ex\u00e9cution.
-escapingFromDebuggerPendingLoop=Sortie de la boucle d'attente du d\u00e9bogeur ; d\u00e9finition de $nowaiting = 1
-continuingDueToError=Continue en raison de l'erreur '${error}'
-currentLocationUnknown=emplacement actuel inconnu
-cannotStep=Vous pouvez maintenant intervenir. D\u00e9finissez les points d'arr\u00eat et tapez 'continue'.
-abortingStep=Le lecteur n'est pas revenu \u00e0 temps ; abandon des ${count} \u00e9tapes restantes
-finishCommandNotMeaningfulOnOutermostFrame=finish' peu significatif sur l'image ext\u00e9rieure
-finishCommandNotMeaningfulWithoutStack=finish' peu significatif sans pile
-noBreakpointNumber=Aucun num\u00e9ro de point d'arr\u00eat ${breakpointNumber}
-badBreakpointNumber=avertissement d'un num\u00e9ro de point d'arr\u00eat incorrect sur ou pr\u00e8s de '${token}'
-commandFailed=Echec de la commande.
-createdBreakpoint=Point d'arr\u00eat ${breakpointNumber} : fichier ${file}, ligne ${line}
-createdBreakpointWithOffset=Point d'arr\u00eat ${breakpointNumber} \u00e0 ${offset} : fichier ${file}, ligne ${line}
-breakpointCreatedButNotYetResolved=Point d'arr\u00eat ${breakpointNumber} cr\u00e9\u00e9, mais pas encore r\u00e9solu.\nLe point d'arr\u00eat sera r\u00e9solu lorsque le fichier ou la fonction correspondant sera charg\u00e9.
-fileNumber=fichier #${fileNumber}
-breakpointNotSetNoCode=Point d'arr\u00eat non d\u00e9fini ; aucune code ex\u00e9cutable \u00e0 la ligne ${line} de ${filename}
-breakpointLocationUnknown=Emplacement du point d'arr\u00eat inconnu.
-breakpointNotCleared=Point d'arr\u00eat non effac\u00e9.
-attemptingToResolve=Tentative de r\u00e9solution du point d'arr\u00eat ${breakpointNumber}, expression "${expression}" :
-noExecutableCode=Aucun code ex\u00e9cutable sur la ligne sp\u00e9cifi\u00e9e.
-resolvedBreakpointToFunction=Point d'arr\u00eat r\u00e9solu ${breakpointNumber} sur ${functionName}() dans ${file}:${line}
-resolvedBreakpointToFile=Point d'arr\u00eat r\u00e9solu ${breakpointNumber} sur ${file}:${line}
-setCommand=La commande Set requiert une variable suivie d'une expression
-missingOperator=L'expression doit contenir l'op\u00e9rateur '${operator}'.
-noSideEffectsAllowed=L'expression ne doit pas avoir d'effet secondaire comme une affectation.
-couldNotEvaluate=Impossible d'\u00e9valuer l'expression.
-commandHistoryIsEmpty=L'historique est vide
-historyHasNotReached=L'historique n'a pas encore atteint ${number}
-variableUnknown=Variable ${variable} inconnue
-expressionCouldNotBeParsed=Impossible d'analyser l'expression correctement :
-couldNotConvertToNumber=Impossible de convertir en un nombre : ${value}
-commandsLimitedToSpecifiedSwf=Commandes limit\u00e9es aux fichiers source de ${swf}
-commandsApplyToAllSwfs=Fichiers source de tous les SWFs disponibles dans les commandes.
-notValidSwf=${swf} n'est pas un fichier SWF correct.
-frameDoesNotExist=L'image '${frameNumber}' n'existe pas.
-notANumber=${token}' n'est pas un nombre.
-expectedLineNumber=Num\u00e9ro de ligne attendu ; ${token} re\u00e7u
-expectedFileNumber=Num\u00e9ro de fichier attendu ; ${token} re\u00e7u
-noSourceFileWithSpecifiedName=Aucun fichier source nomm\u00e9 '${name}'.
-noFunctionWithSpecifiedName=Aucune fonction nomm\u00e9e '${name}'.
-ambiguousMatchingFilenames=Noms de fichiers correspondants ambigus :
-ambiguousMatchingFunctionNames=Noms de fonctions correspondantes ambigus :
-functionInFile=${functionName} dans ${filename}
-expectedFile=Nom de fichier attendu ou num\u00e9ro de fichier commen\u00e7ant par # ; ${token} re\u00e7u
-noSuchFileOrFunction=Aucun fichier ou fonction nomm\u00e9 '${token}'.
-localVariable=variable locale
-functionArgumentVariable=argument
-mustBeOnlyOneVariable=L'expression ne doit contenir qu'une seule variable
-lineJunk=Sp\u00e9cification de texte ind\u00e9sirable \u00e0 l'extr\u00e9mit\u00e9 de la ligne
-sourceFileNotFound=Fichier source introuvable. Utilisez la commande "directory" pour indiquer son\nemplacement sur cet ordinateur. Tapez "help directory" pour afficher des informations importantes\nsur la d\u00e9finition d'un r\u00e9pertoire pour les fichiers source qui se trouvent dans un package.
-lineNumberOutOfRange=Num\u00e9ro de ligne ${line} hors plage ; le fichier ${filename} poss\u00e8de ${total} lignes
-noFilesFound=Aucun fichier trouv\u00e9
-sessionInProgress=La session est d\u00e9j\u00e0 en cours
-waitingForPlayerToConnect=Attente de connexion du lecteur
-waitingToConnectToPlayer=Tentative de connexion au lecteur
-launchingWithUrl=Tentative de lancement et de connexion au lecteur avec l'URL
-playerConnectedSessionStarting=Lecteur connect\u00e9 ; lancement de la session.
-setBreakpointsThenResume=D\u00e9finissez des points d'arr\u00eat, puis tapez 'continue' pour reprendre la session.
-warningNotAllCommandsSupported=AVERTISSEMENT : le lecteur que vous utilisez ne prend pas en charge toutes les commandes fdb.
-fileDoesNotExist=Fichier introuvable : ${uri}
-failedToConnect=Echec de la connexion; la session est arriv\u00e9e \u00e0 expiration.\nV\u00e9rifiez que :\n  1. vous avez compil\u00e9 votre animation Flash avec le d\u00e9bogage activ\u00e9 et que\n  2. vous ex\u00e9cutez la version d\u00e9bogueur de Flash Player.
-manuallyLaunchPlayer=Tapez 'run', puis lancez manuellement le lecteur.
-sourceCommandRequiresPath=la commande 'source' n\u00e9cessite le nom de chemin du fichier vers la source.
-fileNotFound=${filename} : aucun fichier ou r\u00e9pertoire de ce nom.
-argumentRequired=Argument obligatoire (erreur \u00e0 g\u00e9rer).
-breakpointNotChanged=Point d'arr\u00eat inchang\u00e9.
-badWatchpointNumber=Num\u00e9ro de point de contr\u00f4le incorrect.
-couldNotResolveExpression=Impossible de r\u00e9soudre l'expression en variable.
-notAllBreakpointsEnabled=Tous les points d'arr\u00eat ne sont pas activ\u00e9s
-programNotBeingRun=Le programme n'est pas ex\u00e9cut\u00e9.
-commandNotValidUntilPlayerSuspended=La commande n'est pas valide tant que l'ex\u00e9cution du lecteur n'est pas interrompue ; essayez la commande 'halt'.
-noHelpFileFound=Aucun fichier d'aide (fdbhelp*.txt) trouv\u00e9.
-invalidTargetFault=Nom de cible incorrect pour l'instruction ActionSetTarget
-recursionLimitFault=Limite maximale de la limite de r\u00e9cursion atteinte
-invalidWithFault=La cible de l'instruction 'with' n'est pas un objet
-protoLimitFault=La cha\u00eene prototype de recherche a atteint la limite
-invalidUrlFault=Echec de l'ouverture d'une URL
-exceptionFault=Exception utilisateur \u00e9mise
-stackUnderflowFault=Un d\u00e9passement n\u00e9gatif de la pile a eu lieu
-divideByZeroFault=Erreur de division par z\u00e9ro
-scriptTimeoutFault=Le code ActionScript ne progresse pas
-errorWhileProcessingFile=Une erreur est survenue lors du traitement du fichier (${exceptionMessage})
-unrecognizedAction=Action ${action} non reconnue
-typeCommandsForBreakpoint=Tapez les commandes au moment o\u00f9 le point d'arr\u00eat ${breakpointNumber} est atteint, une par ligne.\nTerminez avec une ligne indiquant simplement 'end'.
-breakpointNowUnconditional=Le point d'arr\u00eat ${breakpointNumber} est maintenant inconditionnel.
-watchpointCouldNotBeSet=Un point de contr\u00f4le pour '${expression}' n'a pas pu \u00eatre d\u00e9fini
-
-changedWatchpointMode=Le point de contr\u00f4le ${watchpointNumber} sur l'expression '${expression}' est maintenant ${watchpointMode}
-# the following three strings are inserted into the above 'changedWatchpointMode' string at the ${watchpontMode} location
-watchpointMode_read=lecture seule
-watchpointMode_write=\u00e9criture
-watchpointMode_readWrite=lecture-\u00e9criture
-
-createdWatchpoint=Point de contr\u00f4le ${watchpointNumber} d\u00e9fini sur l'expression '${expression}'
-couldNotFindWatchpoint=Impossible de trouver ou de supprimer le contr\u00f4le de '${variable}'.
-noDisplayNumber=Aucun num\u00e9ro d'affichage ${displayNumber}
-badDisplayNumber=avertissement d'un num\u00e9ro d'affichage incorrect sur ou pr\u00e8s de '${token}'
-breakpointLocationNoLongerExists=Le fichier source et le num\u00e9ro de ligne n'existe plus pour le point d'arr\u00eat ${breakpointNumber}
-unknownCommand=Commande inconnue '${command}', ignorer
-unknownSubcommand=Commande ${commandCategory} inconnue '${command}', ignorer
-unknownEvent=Ev\u00e9nement inconnu re\u00e7u du type '${type}', info = ${info}
-problemWithConnection=Probl\u00e8me de connexion de la session , '${socketErrorMessage}', il est probablement pr\u00e9f\u00e9rable de l'annuler.
-unexpectedErrorWithStackTrace=Erreur inattendue lors du traitement de la commande.\nPour les diagnostics, la trace de la pile suit : 
-ambiguousCommand=Commande ambigu\u00eb '${input}' :
-faultHasNoTableEntry=L'erreur ${faultName} ne poss\u00e8de pas d'entr\u00e9e de table
-swfInfo=${swfName} - ${size} octets apr\u00e8s la d\u00e9compression, ${scriptCount} scripts [#${min} - #${max}]${plus} ${moreInfo}, URL est ${url}
-remainingSourceBeingLoaded=la source restante est toujours en cours de chargement
-
-# the following string is appended to the end of any question; tells the user what to type
-yesOrNoAppendedToAllQuestions=(o ou n) 
-# the following string is what character the user should to answer "yes" to a yes/no question
-singleCharacterUserTypesForYes=y
-# a bunch of questions:
-askDeleteAllBreakpoints=Supprimer tous les points d'arr\u00eat ?
-askDeleteAllAutoDisplay=Supprimer toutes les expressions d'affichage automatique (auto-display) ?
-askKillProgram=Voulez-vous annuler le programme en cours de d\u00e9bogage ?
-askProgramIsRunningExitAnyway=Le programme est en cours d'ex\u00e9cution. Voulez-vous le quitter ?
-askReinitSourcePath=Voulez-vous r\u00e9initialiser le chemin d'acc\u00e8s \u00e0 la source sur une valeur nulle ?
-askExpressionContainsAssignment=Votre expression contient une affectation. Voulez-vous continuer ?
-# the following string is output if someone answers "no" to any of the above questions
-yesNoQueryNotConfirmed=Non confirm\u00e9.
-stopOnlyIfConditionMet=arr\u00eater uniquement si ${breakpointCondition}
-breakpointAlreadyHit=le point le contr\u00f4le a d\u00e9j\u00e0 \u00e9t\u00e9 atteint ${count} fois
-silentBreakpoint=silencieux
-getterFunction=Accesseur Get
-setterFunction=Accesseur d'initialisation
-function=Fonctions de ${fileName}#${fileNumber}
-unknownVariableType=<inconnu>
-variableAttribute_dontEnumerate=ne pas \u00e9num\u00e9rer
-variableAttribute_readOnly=lecture seule
-variableAttribute_localVariable=variable locale
-variableAttribute_functionArgument=argument
-variableAttribute_getterFunction=accesseur de lecture
-variableAttribute_setterFunction=Accesseur d'initialisation
-variableAttribute_hasNamespace=a un espace de noms
-key16=Messages re\u00e7us :
-key17=Messages envoy\u00e9s :
-key18=Aucun fichier source trouv\u00e9
-key19=Aucune fonction trouv\u00e9e
-key20=La liste des fonctions est en cours de pr\u00e9paration en arri\u00e8re-plan ; r\u00e9essayez ult\u00e9rieurement.
-key21=--- Propri\u00e9t\u00e9s SessionManager
-key22=--- Propri\u00e9t\u00e9s Session
-stopped=Stopped
-key24=Lecteur en cours d'ex\u00e9cution.
-key25=Informations d'arr\u00eat introuvables
-key26=Variable inconnue
-key27=Informations source inconnues, emplacement actuel d\u00e9sassembl\u00e9
-key28=Sp\u00e9cification de texte non souhait\u00e9 \u00e0 l'extr\u00e9mit\u00e9 de la ligne
-key29=Aucun fichier SWF trouv\u00e9 pour le fichier ${arg3}
-key30=Aucune fonction trouv\u00e9e
-key31=---- Affichage des instructions non mapp\u00e9es \u00e0 0x${arg4} qui ont \u00e9t\u00e9 ignor\u00e9es ----
-key32=Num\u00e9ro de ligne ${arg5} hors plage ; le fichier ${arg6} poss\u00e8de ${arg7} lignes
-key33=Aucun fichier trouv\u00e9
-key34=Le lecteur n'est actuellement pas interrompu sur des actions.
-key35=dans '${swfName}'
-atAddress=\u00e0 ${adresse}
-haltedDueToFault=en raison de ${fault}
-noWorkersRunning=Aucun op\u00e9rateur en cours d\u2019ex\u00e9cution

http://git-wip-us.apache.org/repos/asf/flex-sdk/blob/de3e1682/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_it.properties
----------------------------------------------------------------------
diff --git a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_it.properties b/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_it.properties
deleted file mode 100644
index d0cd6a5..0000000
--- a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_it.properties
+++ /dev/null
@@ -1,253 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Translation:
-#
-# In this file, a couple of messages are split across multiple lines.  The main
-# reason for that is that fdb is a command-line program, so we prefer to keep
-# messages at less than 80 characters so that they fit in a typical command
-# window.  When translating strings, you can either keep the line breaks in the
-# same places, or move them, or even remove them altogether if a message will
-# fit on a single line.
-
-defaultBuildName=sviluppo
-about=Apache fdb (Flash Player Debugger) [build ${build}]
-copyright=Copyright 2013 The Apache Software Foundation. All rights reserved.
-noResponseException=Player non ha risposto al comando come previsto. Comando terminato.
-notSuspendedException=Impossibile inviare il comando mentre Player \u00e8 in esecuzione
-illegalStateException=Comando non valido senza una sessione.
-illegalMonitorStateException=Comando non valido con Player in esecuzione. Premere Invio per interromperlo.
-playerDidNotStop=Player non \u00e8 stato interrotto come previsto. Premere Invio per interromperlo.
-noSuchElementException=Per questo comando \u00e8 previsto almeno un altro argomento.
-numberFormatException=L'argomento del comando \u00e8 una stringa ma \u00e8 previsto un numero intero.
-socketException=\u00c8 probabile che sia in esecuzione un altro debugger Flash. Chiuderlo. Dettagli: "${message}".
-versionException=Comando non supportato in questo contesto.
-unexpectedError=Errore imprevisto durante l'elaborazione del comando.
-stackTraceFollows=A fini di diagnostica, di seguito viene riportata l'analisi dello stack: 
-sessionEndedAbruptly=Sessione terminata improvvisamente.
-noUriReceived=Non \u00e8 stato ricevuto alcun URI da Player
-noSourceFilesFound=Non \u00e8 stato trovato alcun file di origine
-unknownBreakpointLocation=<sconosciuto>
-unknownFilename=<sconosciuto>
-inFunctionAt=nella funzione ${functionName}() in 
-inSwf=in ${swf}
-nonRestorable=; Non ripristinabile da sessione precedente
-sourceDirectoriesSearched=Directory di origine in cui \u00e8 stata eseguita la ricerca:
-attemptingToSuspend=Tentativo di sospendere l'esecuzione di Player in corso...
-playerStopped=Player interrotto
-playerRunning=Player in esecuzione
-suspendReason_Unknown=Sconosciuto
-suspendReason_HitBreakpoint=Breakpoint
-suspendReason_HitWatchpoint=Watch
-suspendReason_ProgramThrewException=Fault
-suspendReason_StopRequest=StopRequest
-suspendReason_ProgramFinishedStepping=Step
-suspendReason_HaltOpcode=HaltOpcode
-suspendReason_ScriptHasLoadedIntoFlashPlayer=ScriptLoaded
-noStackAvailable=Non sono disponibili stack
-atFilename=in 
-noVariables=nessuna variabile
-noArguments=nessun argomento
-notInValidFrame=Frame non valido. Utilizzare il comando "frame" per tornare al frame corrente.
-noLocals=nessuna variabile locale
-noScopeChain=nessuna catena di ambito
-noActiveSession=Nessuna sessione attiva
-runWillLaunchUri=Il comando "run" avvia ${uri}
-targetUnknown=Destinazione sconosciuta
-noSWFs=nessun file SWF.
-unrecognizedFault=Errore non riconosciuto.
-noFunctionsFound=Non \u00e8 stata trovata alcuna funzione
-functionListBeingPrepared=La funzione \u00e8 in preparazione in background; riprovare pi\u00f9 tardi.
-functionsInSourceFile=Funzioni in ${sourceFile}
-breakpointNotYetResolved=(non ancora risolto)
-breakpointAmbiguous=(ambiguo)
-breakpointNoCode=(la riga specificata non contiene codice eseguibile)
-sessionTerminated=Sessione di Player terminata
-additionalCodeLoaded=\u00c8 stato caricato ulteriore codice ActionScript da un file SWF o da un frame.\nPer visualizzare tutti i file caricati attualmente, digitare "info files".
-setAdditionalBreakpoints=Impostare altri breakpoint, quindi digitare "continue".
-fixBreakpoints=Correggere o rimuovere i breakpoint non validi, quindi digitare "continue".
-executionHalted=Esecuzione sospesa
-hitBreakpoint=Breakpoint ${breakpointNumber}
-haltedInFunction=${reasonForHalting}, ${functionName}() in ${fileAndLine}
-haltedInFile=${reasonForHalting}, ${fileAndLine}
-linePrefixWhenDisplayingConsoleError=[Error]
-linePrefixWhenDisplayingFault=[Fault]
-linePrefixWhenSwfLoaded=[SWF]
-linePrefixWhenSwfUnloaded=[UnloadSWF]
-informationAboutFault=, information=
-sizeAfterDecompression=${size} byte dopo la decompressione
-breakpointNotPropagated=AVVERTIMENTO: breakpoint ${breakpointNumber} non propagato a tutti i file swf.\nCancellarlo e impostarlo di nuovo.
-playerAlreadyRunning=Player \u00e8 gi\u00e0 in esecuzione. Non \u00e8 necessario riprendere l'operazione.
-doYouWantToHalt=Intendete provare a interrompere l'esecuzione?
-debugInfoBeingLoaded=informazioni di debug in fase di caricamento
-attemptingToHalt=Tentativo di arresto in corso.\nProvare a sollecitare Player (ad esempio, premere un pulsante)
-couldNotHalt=Impossibile interrompere. Non \u00e8 in esecuzione alcun ActionScript.
-escapingFromDebuggerPendingLoop=Trasferimento dal debugger in attesa del loop; impostazione di $nowaiting su 1
-continuingDueToError=Proseguimento in seguito all'errore "${error}"
-currentLocationUnknown=posizione corrente sconosciuta
-cannotStep=Non \u00e8 possibile procedere passo a passo in questo momento. Impostare dei breakpoint e quindi digitare "continue".
-abortingStep=Player non ha risposto in tempo. I rimanenti ${count} passaggi verranno terminati.
-finishCommandNotMeaningfulOnOutermostFrame="finish" non ha alcun significato nel frame pi\u00f9 esterno
-finishCommandNotMeaningfulWithoutStack="finish" non ha alcun significato senza uno stack
-noBreakpointNumber=Nessun numero di breakpoint ${breakpointNumber}
-badBreakpointNumber=avvertimento: numero di breakpoint non valido in o in prossimit\u00e0 di "${token}"
-commandFailed=Comando non riuscito.
-createdBreakpoint=Breakpoint ${breakpointNumber}: file ${file}, riga ${line}
-createdBreakpointWithOffset=Breakpoint ${breakpointNumber} in ${offset}: file ${file}, riga ${line}
-breakpointCreatedButNotYetResolved=Breakpoint ${breakpointNumber} creato ma non ancora risolto.\nVerr\u00e0 risolto al caricamento del file o della funzione corrispondente.
-fileNumber=file #${fileNumber}
-breakpointNotSetNoCode=Breakpoint non impostato. La riga ${line} del file ${filename} non contiene codice eseguibile.
-breakpointLocationUnknown=Posizione breakpoint sconosciuta.
-breakpointNotCleared=Breakpoint non cancellato.
-attemptingToResolve=Tentativo di risoluzione del breakpoint ${breakpointNumber}, espressione "${expression}", in corso:
-noExecutableCode=La riga specificata non contiene codice eseguibile.
-resolvedBreakpointToFunction=Breakpoint ${breakpointNumber} risolto nella funzione ${functionName}() in ${file}:${line}
-resolvedBreakpointToFile=Breakpoint ${breakpointNumber} risolto in ${file}:${line}
-setCommand=Il comando di impostazione richiede una variabile seguita da un'espressione
-missingOperator=L'espressione deve contenere l'operatore "${operator}".
-noSideEffectsAllowed=L'espressione non deve causare effetti collaterali, ad esempio assegnazioni.
-couldNotEvaluate=Impossibile valutare l'espressione.
-commandHistoryIsEmpty=La cronologia \u00e8 vuota
-historyHasNotReached=La cronologia non \u00e8 ancora arrivata a ${number}
-variableUnknown=Variabile ${variable} sconosciuta
-expressionCouldNotBeParsed=Impossibile analizzare correttamente l'espressione:
-couldNotConvertToNumber=Impossibile convertire in numero: ${value}
-commandsLimitedToSpecifiedSwf=Comandi limitati ai file di origine dai file ${swf}
-commandsApplyToAllSwfs=File di origine da tutti i file swf disponibili nei comandi.
-notValidSwf=Il file ${swf} non \u00e8 un file SWF valido.
-frameDoesNotExist=Frame "${frameNumber}" inesistente.
-notANumber="${token}" non \u00e8 un numero.
-expectedLineNumber=Previsto numero di riga; ricevuto ${token}
-expectedFileNumber=Previsto numero di file; ricevuto ${token}
-noSourceFileWithSpecifiedName=Il file di origine denominato "${name}" non esiste.
-noFunctionWithSpecifiedName=Nessuna funzione denominata "${name}".
-ambiguousMatchingFilenames=Nomi di file corrispondenti ambigui:
-ambiguousMatchingFunctionNames=Nomi di funzioni corrispondenti ambigui:
-functionInFile=${functionName} in ${filename}
-expectedFile=Il nome o il numero di file deve iniziare per #; ricevuto ${token}
-noSuchFileOrFunction=Il file o la funzione denominata "${token}" non esiste.
-localVariable=variabile locale
-functionArgumentVariable=argomento
-mustBeOnlyOneVariable=L'espressione deve contenere solo una variabile
-lineJunk=Al termine della specifica della riga sono presenti elementi inutili
-sourceFileNotFound=File di origine non trovato. Utilizzare il comando "directory" per specificarne il\npercorso in questo computer. Digitare "help directory" per visualizzare informazioni importanti\nsu come specificare una directory per i file di origine contenuti in un pacchetto.
-lineNumberOutOfRange=Numero di riga ${line} fuori intervallo; il file ${filename} contiene ${total} righe
-noFilesFound=Non \u00e8 stato trovato alcun file
-sessionInProgress=Sessione gi\u00e0 in corso
-waitingForPlayerToConnect=In attesa della connessione di Player
-waitingToConnectToPlayer=Tentativo di connettersi a Player
-launchingWithUrl=Tentativo di avvio e di connessione a Player tramite URL
-playerConnectedSessionStarting=Player connesso. La sessione viene avviata.
-setBreakpointsThenResume=Impostare dei breakpoint, quindi digitare "continue" per riprendere la sessione.
-warningNotAllCommandsSupported=AVVERTIMENTO: la versione di Player utilizzata non supporta tutti i comandi fdb.
-fileDoesNotExist=File non trovato: ${uri}
-failedToConnect=Connessione non riuscita: timeout della sessione.\nVerificare che:\n  1. Il filmato Flash sia stato compilato con il debugging attivato e\n  2. Si sta eseguendo la versione Debugger di Flash Player.
-manuallyLaunchPlayer=Digitare "run" e avviare Player manualmente.
-sourceCommandRequiresPath=Il comando "source" richiede il percorso del file di origine.
-fileNotFound=${filename}: file o directory inesistente.
-argumentRequired=Argomento obbligatorio (errore di gestione).
-breakpointNotChanged=Breakpoint non modificato.
-badWatchpointNumber=Numero punto di controllo non valido.
-couldNotResolveExpression=Impossibile risolvere l'espressione in variabile.
-notAllBreakpointsEnabled=Non tutti i breakpoint sono abilitati
-programNotBeingRun=Il programma non viene eseguito.
-commandNotValidUntilPlayerSuspended=Comando non valido durante la sospensione dell'esecuzione di Player. Provare a utilizzare il comando "halt".
-noHelpFileFound=File della guida in linea (fdbhelp*.txt) non trovato.
-invalidTargetFault=Nome di destinazione non valido per l'istruzione ActionSetTarget
-recursionLimitFault=\u00c8 stato raggiunto il limite superiore della ricorsione
-invalidWithFault=La destinazione dell'istruzione "with" non \u00e8 un oggetto
-protoLimitFault=La ricerca in alto della catena di prototipi ha raggiunto il limite
-invalidUrlFault=Apertura di un URL non riuscita
-exceptionFault=Eccezione generata dall'utente
-stackUnderflowFault=Stack underflow occurred
-divideByZeroFault=Errore di divisione per zero
-scriptTimeoutFault=Il codice ActionScript non sta avanzando
-errorWhileProcessingFile=Errore durante l'elaborazione del file (${exceptionMessage})
-unrecognizedAction=Azione non riconosciuta ${action}
-typeCommandsForBreakpoint=Digitare i comandi da eseguire per il breakpoint ${breakpointNumber}, uno per riga.\nTerminare con una riga contenente "end" da solo.
-breakpointNowUnconditional=Il breakpoint ${breakpointNumber} \u00e8 ora non condizionale.
-watchpointCouldNotBeSet=Impossibile impostare punto di controllo per "${expression}"
-
-changedWatchpointMode=Il punto di controllo numero ${watchpointNumber} nell'espressione "${expression}" \u00e8 ora in modalit\u00e0 ${watchpointMode}
-# the following three strings are inserted into the above 'changedWatchpointMode' string at the ${watchpontMode} location
-watchpointMode_read=lettura
-watchpointMode_write=scrittura
-watchpointMode_readWrite=lettura e scrittura
-
-createdWatchpoint=Punto di controllo numero ${watchpointNumber} impostato nell'espressione "${expression}"
-couldNotFindWatchpoint=Il punto di controllo di "${variable}" non \u00e8 stato trovato o \u00e8 stato rimosso.
-noDisplayNumber=Nessun numero di visualizzazione ${displayNumber}
-badDisplayNumber=avvertimento: numero di visualizzazione non valido in o in prossimit\u00e0 di "${token}"
-breakpointLocationNoLongerExists=Il file di origine e il numero di riga non esistono pi\u00f9 per il breakpoint ${breakpointNumber}
-unknownCommand=Comando sconosciuto "${command}". Verr\u00e0 ignorato.
-unknownSubcommand=Comando della categoria ${commandCategory} sconosciuto: "${command}". Il comando verr\u00e0 ignorato.
-unknownEvent=Ricevuto evento sconosciuto di tipo "${type}". Informazioni = ${info}.
-problemWithConnection=Problema con la connessione della sessione. "${socketErrorMessage}". Si consiglia di interromperla.
-unexpectedErrorWithStackTrace=Errore imprevisto durante l'elaborazione del comando.\nA fini di diagnostica, di seguito viene riportata l'analisi dello stack: 
-ambiguousCommand=Comando "${input}" ambiguo:
-faultHasNoTableEntry=Nessuna voce di tabella per l'errore ${faultName}
-swfInfo=${swfName} - ${size} byte dopo la decompressione, ${scriptCount} script [#${min} - #${max}]${plus} ${moreInfo}, URL: ${url}
-remainingSourceBeingLoaded=origine rimanente ancora in fase di caricamento
-
-# the following string is appended to the end of any question; tells the user what to type
-yesOrNoAppendedToAllQuestions=(s o n) 
-# the following string is what character the user should to answer "yes" to a yes/no question
-singleCharacterUserTypesForYes=y
-# a bunch of questions:
-askDeleteAllBreakpoints=Intendete eliminare tutti i breakpoint?
-askDeleteAllAutoDisplay=Intendete eliminare tutte le espressioni a visualizzazione automatica?
-askKillProgram=Intendete interrompere il programma in fase di debug?
-askProgramIsRunningExitAnyway=Il programma \u00e8 in esecuzione. Intendete uscire lo stesso?
-askReinitSourcePath=Intendete svuotare il percorso di destinazione?
-askExpressionContainsAssignment=L'espressione contiene un'assegnazione. Intendete continuare?
-# the following string is output if someone answers "no" to any of the above questions
-yesNoQueryNotConfirmed=Non confermato
-stopOnlyIfConditionMet=stop only if ${breakpointCondition}
-breakpointAlreadyHit=il breakpoint \u00e8 gi\u00e0 stato raggiunto ${count} volta/e
-silentBreakpoint=invisibile
-getterFunction=Propriet\u00e0 di richiamo
-setterFunction=Propriet\u00e0 di impostazione
-function=Funzione
-unknownVariableType=<sconosciuto>
-variableAttribute_dontEnumerate=non enumerare
-variableAttribute_readOnly=sola lettura
-variableAttribute_localVariable=locale
-variableAttribute_functionArgument=argomento
-variableAttribute_getterFunction=propriet\u00e0 di richiamo
-variableAttribute_setterFunction=propriet\u00e0 di impostazione
-variableAttribute_hasNamespace=ha lo spazio dei nomi
-key16=Messaggi ricevuti:
-key17=Messaggi inviati:
-key18=Non \u00e8 stato trovato alcun file di origine
-key19=Non \u00e8 stata trovata alcuna funzione
-key20=\u00c8 in corso la generazione dell'elenco delle funzioni in background; riprovare pi\u00f9 tardi.
-key21=--- Propriet\u00e0 di SessionManager
-key22=--- Propriet\u00e0 della sessione
-stopped=Stopped
-key24=Player in esecuzione.
-key25=Non sono state trovate informazioni di interruzione
-key26=Variabile sconosciuta
-key27=Informazioni di origine sconosciute. Posizione corrente disassemblata.
-key28=Al termine della specifica della riga sono presenti elementi inutili
-key29=Non \u00e8 stato trovato alcun file swf per il file ${arg3}
-key30=Non \u00e8 stata trovata alcuna funzione
-key31=---- Visualizzazione istruzioni non mappate in 0x${arg4} ignorate ----
-key32=Numero di riga ${arg5} fuori intervallo; il file ${arg6} contiene ${arg7} righe
-key33=Non \u00e8 stato trovato alcun file
-key34=Player non sospeso per tutte le azioni.
-key35=in "${swfName}"
-atAddress=in ${address}
-haltedDueToFault=a causa di ${fault}

http://git-wip-us.apache.org/repos/asf/flex-sdk/blob/de3e1682/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_ja.properties
----------------------------------------------------------------------
diff --git a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_ja.properties b/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_ja.properties
deleted file mode 100644
index 7f68711..0000000
--- a/modules/fdbworkers/src/flex/tools/debugger/cli/fdb_ja.properties
+++ /dev/null
@@ -1,263 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Translation:
-#
-# In this file, a couple of messages are split across multiple lines.  The main
-# reason for that is that fdb is a command-line program, so we prefer to keep
-# messages at less than 80 characters so that they fit in a typical command
-# window.  When translating strings, you can either keep the line breaks in the
-# same places, or move them, or even remove them altogether if a message will
-# fit on a single line.
-
-defaultBuildName=development
-about=Apache fdb (Flash Player Debugger) [\u30d3\u30eb\u30c9 ${build}]
-copyright=Copyright 2013 The Apache Software Foundation. All rights reserved.
-noResponseException=Player \u304c\u30b3\u30de\u30f3\u30c9\u306b\u5bfe\u3057\u3066\u4e88\u671f\u3055\u308c\u305f\u5fdc\u7b54\u3092\u3057\u306a\u304b\u3063\u305f\u305f\u3081\u3001\u30b3\u30de\u30f3\u30c9\u51e6\u7406\u306f\u4e2d\u6b62\u3055\u308c\u307e\u3057\u305f\u3002
-notSuspendedException=Player \u306e\u5b9f\u884c\u4e2d\u306b\u30b3\u30de\u30f3\u30c9\u3092\u5b9f\u884c\u3059\u308b\u3053\u3068\u306f\u3067\u304d\u307e\u305b\u3093
-illegalStateException=\u30bb\u30c3\u30b7\u30e7\u30f3\u304c\u78ba\u7acb\u3055\u308c\u3066\u3044\u306a\u3044\u5834\u5408\u3001\u30b3\u30de\u30f3\u30c9\u306f\u7121\u52b9\u3067\u3059\u3002
-illegalMonitorStateException=\u5b9f\u884c\u4e2d\u306e Player \u306b\u5bfe\u3059\u308b\u30b3\u30de\u30f3\u30c9\u304c\u7121\u52b9\u3067\u3059\u3002\u4e2d\u6b62\u3059\u308b\u306b\u306f\u3001Enter \u30ad\u30fc\u3092\u62bc\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-playerDidNotStop=Player \u304c\u4e88\u671f\u3057\u305f\u3068\u304a\u308a\u306b\u4e2d\u6b62\u3055\u308c\u307e\u305b\u3093\u3067\u3057\u305f\u3002\u4e2d\u6b62\u3059\u308b\u306b\u306f\u3001Enter \u30ad\u30fc\u3092\u62bc\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-noSuchElementException=\u3053\u306e\u30b3\u30de\u30f3\u30c9\u306b\u306f\u3001\u30d1\u30e9\u30e1\u30fc\u30bf\u30fc\u304c\u5c11\u306a\u304f\u3068\u3082\u3042\u3068 1 \u3064\u5fc5\u8981\u3067\u3059\u3002
-numberFormatException=\u30b3\u30de\u30f3\u30c9\u30d1\u30e9\u30e1\u30fc\u30bf\u30fc\u306f\u6574\u6570\u3067\u3042\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u304c\u3001\u5b9f\u969b\u306b\u306f\u30b9\u30c8\u30ea\u30f3\u30b0\u3067\u3059\u3002
-socketException=\u5225\u306e Flash \u30c7\u30d0\u30c3\u30ac\u30fc\u304c\u5b9f\u884c\u3055\u308c\u3066\u3044\u308b\u53ef\u80fd\u6027\u304c\u3042\u308a\u307e\u3059\u3002\u305d\u308c\u3092\u7d42\u4e86\u3057\u3066\u304f\u3060\u3055\u3044\u3002\u8a73\u7d30 : '${message}'\u3002
-versionException=\u3053\u306e\u30b3\u30f3\u30c6\u30ad\u30b9\u30c8\u3067\u306f\u3001\u30b3\u30de\u30f3\u30c9\u306f\u5b9f\u884c\u3067\u304d\u307e\u305b\u3093\u3002
-unexpectedError=\u30b3\u30de\u30f3\u30c9\u306e\u51e6\u7406\u4e2d\u306b\u3001\u4e88\u671f\u3057\u306a\u3044\u30a8\u30e9\u30fc\u304c\u767a\u751f\u3057\u307e\u3057\u305f\u3002
-stackTraceFollows=\u8a3a\u65ad\u3092\u884c\u3046\u305f\u3081\u3001\u7d9a\u3044\u3066\u30b9\u30bf\u30c3\u30af\u30c8\u30ec\u30fc\u30b9\u304c\u5b9f\u884c\u3055\u308c\u307e\u3059 : 
-sessionEndedAbruptly=\u30bb\u30c3\u30b7\u30e7\u30f3\u304c\u7a81\u7136\u7d42\u4e86\u3057\u307e\u3057\u305f\u3002
-noUriReceived=Player \u304b\u3089 URI \u3092\u53d7\u4fe1\u3057\u307e\u305b\u3093\u3067\u3057\u305f
-noSourceFilesFound=\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-unknownBreakpointLocation=<\u4e0d\u660e>
-unknownFilename=<\u4e0d\u660e>
-inFunctionAt=\u306e\u5834\u6240\u306b\u3042\u308b ${functionName}() \u5185 
-inSwf=${swf} \u5185
-inWorker=\u30ef\u30fc\u30ab\u30fc ${worker}
-workerRunning=\u5b9f\u884c\u4e2d
-workerSuspended=\u4e2d\u65ad
-workerSelected=(\u30a2\u30af\u30c6\u30a3\u30d6)
-mainThread=\u30e1\u30a4\u30f3\u30b9\u30ec\u30c3\u30c9
-nonRestorable=; \u76f4\u524d\u306e\u30bb\u30c3\u30b7\u30e7\u30f3\u304b\u3089\u5fa9\u5143\u3067\u304d\u307e\u305b\u3093
-sourceDirectoriesSearched=\u691c\u7d22\u3057\u305f\u30bd\u30fc\u30b9\u30c7\u30a3\u30ec\u30af\u30c8\u30ea :
-attemptingToSuspend=Player \u306e\u5b9f\u884c\u3092\u4e2d\u65ad\u3057\u3066\u3044\u307e\u3059...
-playerStopped=Player \u304c\u505c\u6b62\u3057\u307e\u3057\u305f
-playerRunning=Player \u306f\u5b9f\u884c\u4e2d\u3067\u3059
-suspendReason_Unknown=Unknown
-suspendReason_HitBreakpoint=Breakpoint
-suspendReason_HitWatchpoint=Watch
-suspendReason_ProgramThrewException=Fault
-suspendReason_StopRequest=StopRequest
-suspendReason_ProgramFinishedStepping=Step
-suspendReason_HaltOpcode=HaltOpcode
-suspendReason_ScriptHasLoadedIntoFlashPlayer=ScriptLoaded
-noStackAvailable=\u30b9\u30bf\u30c3\u30af\u3092\u4f7f\u7528\u3067\u304d\u307e\u305b\u3093
-atFilename=\u5834\u6240 :  
-noVariables=\u5909\u6570\u304c\u3042\u308a\u307e\u305b\u3093
-noArguments=\u5f15\u6570\u304c\u6307\u5b9a\u3055\u308c\u3066\u3044\u307e\u305b\u3093
-notInValidFrame=\u6709\u52b9\u306a\u30d5\u30ec\u30fc\u30e0\u5185\u306b\u3042\u308a\u307e\u305b\u3093\u3002\u73fe\u5728\u306e\u30d5\u30ec\u30fc\u30e0\u306b\u623b\u308b\u306b\u306f\u3001'frame' \u30b3\u30de\u30f3\u30c9\u3092\u4f7f\u7528\u3057\u307e\u3059\u3002
-noLocals=\u30ed\u30fc\u30ab\u30eb\u304c\u3042\u308a\u307e\u305b\u3093
-noScopeChain=\u30b9\u30b3\u30fc\u30d7\u30c1\u30a7\u30fc\u30f3\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-noActiveSession=\u30a2\u30af\u30c6\u30a3\u30d6\u306a\u30bb\u30c3\u30b7\u30e7\u30f3\u304c\u3042\u308a\u307e\u305b\u3093
-runWillLaunchUri=\u300crun\u300d\u3068\u5165\u529b\u3059\u308b\u3068\u3001${uri} \u304c\u8d77\u52d5\u3057\u307e\u3059
-targetUnknown=\u30bf\u30fc\u30b2\u30c3\u30c8\u304c\u4e0d\u660e\u3067\u3059
-noSWFs=SWF \u30d5\u30a1\u30a4\u30eb\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-unrecognizedFault=\u4e0d\u660e\u306a\u30d5\u30a9\u30eb\u30c8
-noFunctionsFound=\u95a2\u6570\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-functionListBeingPrepared=\u95a2\u6570\u30ea\u30b9\u30c8\u3092\u30d0\u30c3\u30af\u30b0\u30e9\u30a6\u30f3\u30c9\u3067\u6e96\u5099\u4e2d\u3067\u3059\u3002\u5f8c\u3067\u3082\u3046\u4e00\u5ea6\u5b9f\u884c\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-functionsInSourceFile=${sourceFile} \u5185\u306e\u95a2\u6570
-breakpointNotYetResolved=(\u307e\u3060\u89e3\u6c7a\u3055\u308c\u3066\u3044\u307e\u305b\u3093)
-breakpointAmbiguous=(ambiguous)
-breakpointNoCode=(\u6307\u5b9a\u884c\u306b\u306f\u5b9f\u884c\u53ef\u80fd\u306a\u30b3\u30fc\u30c9\u304c\u3042\u308a\u307e\u305b\u3093)
-sessionTerminated=Player \u30bb\u30c3\u30b7\u30e7\u30f3\u304c\u7d42\u4e86\u3057\u307e\u3057\u305f
-additionalCodeLoaded=SWF \u30d5\u30a1\u30a4\u30eb\u307e\u305f\u306f\u30d5\u30ec\u30fc\u30e0\u304b\u3089\u8ffd\u52a0\u306e ActionScript \u30b3\u30fc\u30c9\u304c\u30ed\u30fc\u30c9\u3055\u308c\u307e\u3057\u305f\u3002\n\u73fe\u5728\u30ed\u30fc\u30c9\u3055\u308c\u3066\u3044\u308b\u3059\u3079\u3066\u306e\u30d5\u30a1\u30a4\u30eb\u3092\u8868\u793a\u3059\u308b\u306b\u306f\u3001\u300cinfo files\u300d\u3068\u5165\u529b\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-workerChanged=\u30a2\u30af\u30c6\u30a3\u30d6\u306a\u30ef\u30fc\u30ab\u30fc\u304c\u30ef\u30fc\u30ab\u30fc\u306b\u5909\u66f4\u3055\u308c\u307e\u3057\u305f
-workerNotFound=\u305d\u306e ID \u306e\u30ef\u30fc\u30ab\u30fc\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-setAdditionalBreakpoints=\u5fc5\u8981\u306b\u5fdc\u3058\u3066\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u8ffd\u52a0\u8a2d\u5b9a\u3057\u3001\u300ccontinue\u300d\u3068\u5165\u529b\u3057\u307e\u3059\u3002
-fixBreakpoints=\u4e0d\u6b63\u306a\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u4fee\u6b63\u307e\u305f\u306f\u524a\u9664\u3057\u3001\u300ccontinue\u300d\u3068\u5165\u529b\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-executionHalted=\u5b9f\u884c\u304c\u4e2d\u6b62\u3055\u308c\u307e\u3057\u305f
-hitBreakpoint=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber}
-haltedInFunction=\u7406\u7531 : ${reasonForHalting}\u3001\u95a2\u6570\u540d : ${functionName}()\u3001\u5834\u6240 : ${fileAndLine}
-haltedInFile=${reasonForHalting}, ${fileAndLine}
-linePrefixWhenDisplayingConsoleError=[\u30a8\u30e9\u30fc]
-linePrefixWhenDisplayingFault=[\u30d5\u30a9\u30eb\u30c8]
-linePrefixWhenWorkerCreated=[WorkerCreate]
-linePrefixWhenWorkerExit=[WorkerDestroy]
-linePrefixWhenSwfLoaded=[SWF]
-linePrefixWhenSwfUnloaded=[UnloadSWF]
-informationAboutFault=\u3001\u60c5\u5831 =
-sizeAfterDecompression=${size} \u30d0\u30a4\u30c8 (\u89e3\u51cd\u5f8c)
-breakpointNotPropagated=\u8b66\u544a :  \u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u304c\u4e00\u90e8\u306e SWF \u30d5\u30a1\u30a4\u30eb\u306b\u53cd\u6620\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002\n\u3053\u306e\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u3044\u3063\u305f\u3093\u89e3\u9664\u3057\u3001\u518d\u8a2d\u5b9a\u3059\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u3002
-playerAlreadyRunning=Player \u306f\u65e2\u306b\u5b9f\u884c\u4e2d\u3067\u3059\u3002\u518d\u958b\u306e\u5fc5\u8981\u306f\u3042\u308a\u307e\u305b\u3093\u3002
-doYouWantToHalt=\u5b9f\u884c\u3092\u4e2d\u6b62\u3057\u307e\u3059\u304b?
-debugInfoBeingLoaded=\u30c7\u30d0\u30c3\u30b0\u60c5\u5831\u3092\u30ed\u30fc\u30c9\u3057\u3066\u3044\u307e\u3059
-attemptingToHalt=\u4e2d\u6b62\u3057\u3088\u3046\u3068\u3057\u3066\u3044\u307e\u3059\u3002\n\u4e2d\u6b62\u51e6\u7406\u3092\u5b8c\u4e86\u3055\u305b\u308b\u306b\u306f\u3001Player \u3092\u64cd\u4f5c\u3057\u3066\u307f\u3066\u304f\u3060\u3055\u3044 (\u30dc\u30bf\u30f3\u3092\u62bc\u3059\u306a\u3069)
-couldNotHalt=\u4e2d\u6b62\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002ActionScript \u304c\u5b9f\u884c\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-escapingFromDebuggerPendingLoop=\u30c7\u30d0\u30c3\u30ac\u30fc\u306e\u4fdd\u7559\u4e2d\u306e\u30eb\u30fc\u30d7\u304b\u3089\u629c\u3051\u308b\u51e6\u7406\u3092\u5b9f\u884c\u4e2d\u3067\u3059: $nowaiting = 1 \u306b\u8a2d\u5b9a
-continuingDueToError=\u30a8\u30e9\u30fc ${error} \u304c\u767a\u751f\u3057\u305f\u305f\u3081\u3001\u7d9a\u884c\u3057\u3066\u3044\u307e\u3059
-currentLocationUnknown=\u73fe\u5728\u306e\u4f4d\u7f6e\u304c\u4e0d\u660e\u3067\u3059
-cannotStep=\u30b9\u30c6\u30c3\u30d7\u306f\u3067\u304d\u307e\u305b\u3093\u3002\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u8a2d\u5b9a\u3057\u3001\u300ccontinue\u300d\u3068\u5165\u529b\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-abortingStep=\u4e00\u5b9a\u6642\u9593\u5185\u306b Player \u304b\u3089\u306e\u5fdc\u7b54\u304c\u3042\u308a\u307e\u305b\u3093\u3067\u3057\u305f\u3002\u6b8b\u308a\u306e ${count} \u624b\u9806\u3092\u4e2d\u6b62\u3057\u3066\u3044\u307e\u3059
-finishCommandNotMeaningfulOnOutermostFrame=\u4e00\u756a\u5916\u5074\u306e\u30d5\u30ec\u30fc\u30e0\u3067\u306f\u3001'finish' \u306f\u7121\u610f\u5473\u3067\u3059
-finishCommandNotMeaningfulWithoutStack=\u30b9\u30bf\u30c3\u30af\u304c\u306a\u3044\u5834\u5408\u3001'finish' \u306f\u7121\u610f\u5473\u3067\u3059
-noBreakpointNumber=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u756a\u53f7 ${breakpointNumber} \u304c\u3042\u308a\u307e\u305b\u3093\u3002
-badBreakpointNumber='${token}' \u307e\u305f\u306f\u305d\u306e\u8fd1\u304f\u306b\u3001\u4e0d\u6b63\u306a\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u756a\u53f7\u304c\u3042\u308a\u307e\u3059
-commandFailed=\u30b3\u30de\u30f3\u30c9\u3092\u5b9f\u884c\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-createdBreakpoint=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} : \u30d5\u30a1\u30a4\u30eb ${file}\u3001\u884c\u756a\u53f7 ${line}
-createdBreakpointWithOffset=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 : ${breakpointNumber}\u3001\u30aa\u30d5\u30bb\u30c3\u30c8 : ${offset}\u3001\u30d5\u30a1\u30a4\u30eb : ${file}\u3001\u884c\u756a\u53f7 : ${line}
-breakpointCreatedButNotYetResolved=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u304c\u4f5c\u6210\u3055\u308c\u307e\u3057\u305f\u304c\u3001\u307e\u3060\u89e3\u6c7a\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002\n\u5bfe\u5fdc\u3059\u308b\u30d5\u30a1\u30a4\u30eb\u307e\u305f\u306f\u95a2\u6570\u304c\u30ed\u30fc\u30c9\u3055\u308c\u305f\u3068\u304d\u306b\u3001\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306f\u89e3\u6c7a\u3055\u308c\u307e\u3059\u3002
-fileNumber=\u30d5\u30a1\u30a4\u30eb #${fileNumber}
-breakpointNotSetNoCode=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u304c\u8a2d\u5b9a\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002"${filename}" \u306e\u884c\u756a\u53f7 ${line} \u306b\u3001\u5b9f\u884c\u53ef\u80fd\u306a\u30b3\u30fc\u30c9\u304c\u3042\u308a\u307e\u305b\u3093
-breakpointLocationUnknown=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306e\u4f4d\u7f6e\u304c\u4e0d\u660e\u3067\u3059\u3002
-breakpointNotCleared=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306f\u89e3\u9664\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-attemptingToResolve=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber}\u3001\u5f0f "${expression}" \u3092\u89e3\u6c7a\u3057\u3066\u3044\u307e\u3059 :
-noExecutableCode=\u6307\u5b9a\u884c\u306b\u5b9f\u884c\u53ef\u80fd\u306a\u30b3\u30fc\u30c9\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-resolvedBreakpointToFunction=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u304c ${file}:${line} \u306e ${functionName}() \u306b\u89e3\u6c7a\u3055\u308c\u307e\u3057\u305f
-resolvedBreakpointToFile=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u304c ${file}:${line} \u306b\u89e3\u6c7a\u3055\u308c\u307e\u3057\u305f
-setCommand=set \u30b3\u30de\u30f3\u30c9\u3067\u306f\u3001\u5909\u6570\u306e\u5f8c\u306b\u5f0f\u3092\u6307\u5b9a\u3059\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059
-missingOperator=\u5f0f\u306b\u6f14\u7b97\u5b50 '${operator}' \u3092\u4f7f\u7528\u3067\u304d\u307e\u305b\u3093\u3002
-noSideEffectsAllowed=\u5f0f\u3067\u306f\u4ee3\u5165\u306a\u3069\u306e\u526f\u4f5c\u7528\u3092\u4f7f\u7528\u3067\u304d\u307e\u305b\u3093\u3002
-couldNotEvaluate=\u5f0f\u3092\u8a55\u4fa1\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-commandHistoryIsEmpty=\u5c65\u6b74\u304c\u7a7a\u3067\u3059
-historyHasNotReached=\u5c65\u6b74\u304c\u307e\u3060 ${number} \u306b\u9054\u3057\u3066\u3044\u307e\u305b\u3093
-variableUnknown=\u5909\u6570 ${variable} \u304c\u4e0d\u660e\u3067\u3059
-expressionCouldNotBeParsed=\u5f0f\u3092\u6b63\u3057\u304f\u89e3\u6790\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f :
-couldNotConvertToNumber=\u6570\u5024\u306b\u5909\u63db\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f : ${value}
-commandsLimitedToSpecifiedSwf=\u30b3\u30de\u30f3\u30c9\u306f\u3001${swf} \u306e\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u306b\u5bfe\u3057\u3066\u306e\u307f\u5b9f\u884c\u3067\u304d\u307e\u3059
-commandsApplyToAllSwfs=\u30b3\u30de\u30f3\u30c9\u3067\u306f\u3001\u3059\u3079\u3066\u306e SWF \u30d5\u30a1\u30a4\u30eb\u306b\u5bfe\u3059\u308b\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u3092\u6307\u5b9a\u3067\u304d\u307e\u3059\u3002
-notValidSwf=\\u201d${swf}\\u201d \u306f\u6709\u52b9\u306a SWF \u30d5\u30a1\u30a4\u30eb\u3067\u306f\u3042\u308a\u307e\u305b\u3093\u3002
-frameDoesNotExist=\u30d5\u30ec\u30fc\u30e0 '${frameNumber}' \u304c\u5b58\u5728\u3057\u307e\u305b\u3093\u3002
-notANumber='${token}' \u306f\u6570\u5024\u3067\u306f\u3042\u308a\u307e\u305b\u3093\u3002
-expectedLineNumber=\u884c\u756a\u53f7\u304c\u5fc5\u8981\u3067\u3059\u3002${token} \u304c\u53d6\u5f97\u3055\u308c\u307e\u3057\u305f\u3002
-expectedFileNumber=\u30d5\u30a1\u30a4\u30eb\u756a\u53f7\u304c\u5fc5\u8981\u3067\u3059\u304c\u3001${token} \u304c\u53d6\u5f97\u3055\u308c\u307e\u3057\u305f\u3002
-noSourceFileWithSpecifiedName='${name}' \u3068\u3044\u3046\u540d\u524d\u306e\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-noFunctionWithSpecifiedName=${name} \u3068\u3044\u3046\u540d\u524d\u306e\u95a2\u6570\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-ambiguousMatchingFilenames=\u3042\u3044\u307e\u3044\u4e00\u81f4\u306e\u30d5\u30a1\u30a4\u30eb\u540d :
-ambiguousMatchingFunctionNames=\u3042\u3044\u307e\u3044\u4e00\u81f4\u3057\u305f\u95a2\u6570\u540d :
-functionInFile=${filename} \u5185\u306e ${functionName}
-expectedFile=# \u3067\u59cb\u307e\u308b\u30d5\u30a1\u30a4\u30eb\u540d\u307e\u305f\u306f\u30d5\u30a1\u30a4\u30eb\u756a\u53f7\u304c\u5fc5\u8981\u3067\u3059\u304c\u3001${token} \u304c\u53d6\u5f97\u3055\u308c\u307e\u3057\u305f
-noSuchFileOrFunction='${token}' \u3068\u3044\u3046\u540d\u524d\u306e\u30d5\u30a1\u30a4\u30eb\u307e\u305f\u306f\u95a2\u6570\u304c\u3042\u308a\u307e\u305b\u3093\u3002
-localVariable=local
-functionArgumentVariable=argument
-mustBeOnlyOneVariable=\u5f0f\u306b\u306f\u5909\u6570\u3092 1 \u3064\u306e\u307f\u6307\u5b9a\u3067\u304d\u307e\u3059
-lineJunk=\u884c\u6307\u5b9a\u306e\u672b\u5c3e\u3067\u7834\u68c4\u3057\u307e\u3059\u3002
-sourceFileNotFound=\\u30BD\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f\u3002\u3053\u306e\u30b3\u30f3\u30d4\u30e5\u30fc\u30bf\u30fc\u4e0a\u306e\u5834\u6240\u3092\u6307\u5b9a\u3059\u308b\u306b\u306f\u3001\n\u300cdirectory\u300d \u30b3\u30de\u30f3\u30c9\u3092\u4f7f\u7528\u3057\u307e\u3059\u3002\u30d1\u30c3\u30b1\u30fc\u30b8\u5185\u306e\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u306e\u30c7\u30a3\u30ec\u30af\u30c8\u30ea\u3092\u6307\u5b9a\u3059\u308b\u65b9\u6cd5\u3092\u78ba\u8a8d\u3059\u308b\u306b\u306f\u3001\n\u300chelp directory\u300d\u3068\u5165\u529b\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-lineNumberOutOfRange=\u884c\u756a\u53f7 ${line} \u306f\u7bc4\u56f2\u5916\u3067\u3059: \u30d5\u30a1\u30a4\u30eb "${filename}" \u306e\u884c\u6570\u306f ${total} \u884c\u3067\u3059
-noFilesFound=\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-sessionInProgress=\u30bb\u30c3\u30b7\u30e7\u30f3\u306f\u65e2\u306b\u958b\u59cb\u3057\u3066\u3044\u307e\u3059
-waitingForPlayerToConnect=Player \u304c\u63a5\u7d9a\u3059\u308b\u306e\u3092\u5f85\u3063\u3066\u3044\u307e\u3059
-waitingToConnectToPlayer=Player \u306b\u63a5\u7d9a\u3057\u3088\u3046\u3068\u3057\u3066\u3044\u307e\u3059
-launchingWithUrl=URL \u3092\u4f7f\u7528\u3057\u3066 Player \u3092\u8d77\u52d5\u3057\u3001\u63a5\u7d9a\u3057\u3088\u3046\u3068\u3057\u3066\u3044\u307e\u3059
-playerConnectedSessionStarting=Player \u304c\u63a5\u7d9a\u3055\u308c\u307e\u3057\u305f\u3002\u30bb\u30c3\u30b7\u30e7\u30f3\u3092\u958b\u59cb\u3057\u3066\u3044\u307e\u3059\u3002
-setBreakpointsThenResume=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u8a2d\u5b9a\u3057\u3066\u300ccontinue\u300d\u3068\u5165\u529b\u3057\u3001\u30bb\u30c3\u30b7\u30e7\u30f3\u3092\u518d\u958b\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-warningNotAllCommandsSupported=\u8b66\u544a : \u73fe\u5728\u4f7f\u7528\u3057\u3066\u3044\u308b Player \u3067\u306f\u3001\u4e00\u90e8\u306e fdb \u30b3\u30de\u30f3\u30c9\u304c\u30b5\u30dd\u30fc\u30c8\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-fileDoesNotExist=\u6b21\u306e\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f : ${uri}
-failedToConnect=\u63a5\u7d9a\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002\u30bb\u30c3\u30b7\u30e7\u30f3\u30bf\u30a4\u30e0\u30a2\u30a6\u30c8\u3067\u3059\u3002\n\u6b21\u306e\u4e8b\u9805\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044\u3002\n  1. Flash \u30e0\u30fc\u30d3\u30fc\u306e\u30b3\u30f3\u30d1\u30a4\u30eb\u6642\u306b\u30c7\u30d0\u30c3\u30b0\u30aa\u30d7\u30b7\u30e7\u30f3\u3092\u6709\u52b9\u306b\u3057\u305f\n  2. \u73fe\u5728\u5b9f\u884c\u3057\u3066\u3044\u308b Flash Player \u304c\u30c7\u30d0\u30c3\u30ac\u30fc\u30d0\u30fc\u30b8\u30e7\u30f3\u3067\u3042\u308b
-manuallyLaunchPlayer=\u300crun\u300d\u3068\u5165\u529b\u3057\u3001Player \u3092\u624b\u52d5\u3067\u8d77\u52d5\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-sourceCommandRequiresPath='source' \u30b3\u30de\u30f3\u30c9\u3067\u306f\u3001\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u3078\u306e\u30d1\u30b9\u540d\u3092\u6307\u5b9a\u3059\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u3002
-fileNotFound=${filename}: \u3053\u306e\u3088\u3046\u306a\u30d5\u30a1\u30a4\u30eb\u307e\u305f\u306f\u30c7\u30a3\u30ec\u30af\u30c8\u30ea\u306f\u3042\u308a\u307e\u305b\u3093\u3002
-argumentRequired=\u30d1\u30e9\u30e1\u30fc\u30bf\u30fc\u304c\u5fc5\u8981\u3067\u3059 (handle \u306e\u30d5\u30a9\u30eb\u30c8\u30bf\u30a4\u30d7)\u3002
-breakpointNotChanged=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306f\u5909\u66f4\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-badWatchpointNumber=\u76e3\u8996\u30dd\u30a4\u30f3\u30c8\u756a\u53f7\u304c\u4e0d\u6b63\u3067\u3059\u3002
-couldNotResolveExpression=\u5f0f\u3092\u5909\u6570\u306b\u89e3\u6c7a\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-notAllBreakpointsEnabled=\u4e00\u90e8\u306e\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u304c\u7121\u52b9\u306b\u306a\u3063\u3066\u3044\u307e\u3059
-programNotBeingRun=\u30d7\u30ed\u30b0\u30e9\u30e0\u306f\u73fe\u5728\u5b9f\u884c\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-commandNotValidUntilPlayerSuspended=Player \u306e\u5b9f\u884c\u304c\u4e2d\u65ad\u3055\u308c\u308b\u307e\u3067\u3001\u30b3\u30de\u30f3\u30c9\u306f\u7121\u52b9\u3067\u3059\u3002"halt"\u30b3\u30de\u30f3\u30c9\u3092\u5b9f\u884c\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-noHelpFileFound=\u30d8\u30eb\u30d7\u30d5\u30a1\u30a4\u30eb (fdbhelp*.txt) \u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-invalidTargetFault=ActionSetTarget \u547d\u4ee4\u306b\u5bfe\u3059\u308b\u30bf\u30fc\u30b2\u30c3\u30c8\u540d\u304c\u4e0d\u6b63\u3067\u3059
-recursionLimitFault=\u518d\u5e30\u5236\u9650\u306e\u4e0a\u9650\u306b\u9054\u3057\u307e\u3057\u305f
-invalidWithFault='with' \u30b9\u30c6\u30fc\u30c8\u30e1\u30f3\u30c8\u306e\u30bf\u30fc\u30b2\u30c3\u30c8\u304c\u30aa\u30d6\u30b8\u30a7\u30af\u30c8\u3067\u306f\u3042\u308a\u307e\u305b\u3093
-protoLimitFault=\u30d7\u30ed\u30c8\u30bf\u30a4\u30d7\u30c1\u30a7\u30fc\u30f3\u306e\u691c\u7d22\u304c\u5236\u9650\u306b\u9054\u3057\u307e\u3057\u305f
-invalidUrlFault=URL \u3092\u958b\u304f\u3053\u3068\u304c\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f
-exceptionFault=\u30e6\u30fc\u30b6\u30fc\u4f8b\u5916\u304c\u30b9\u30ed\u30fc\u3055\u308c\u307e\u3057\u305f
-stackUnderflowFault=\u30b9\u30bf\u30c3\u30af\u30a2\u30f3\u30c0\u30fc\u30d5\u30ed\u30fc\u304c\u767a\u751f\u3057\u307e\u3057\u305f
-divideByZeroFault=0 \u306b\u3088\u308b\u9664\u7b97\u306e\u30a8\u30e9\u30fc
-scriptTimeoutFault=ActionScript \u30b3\u30fc\u30c9\u306e\u5b9f\u884c\u304c\u9032\u3093\u3067\u3044\u307e\u305b\u3093
-errorWhileProcessingFile=\u30d5\u30a1\u30a4\u30eb\u306e\u51e6\u7406\u4e2d\u306b\u30a8\u30e9\u30fc\u304c\u767a\u751f\u3057\u307e\u3057\u305f (${exceptionMessage})\u3002
-unrecognizedAction=\u30a2\u30af\u30b7\u30e7\u30f3 ${action} \u304c\u8a8d\u8b58\u3055\u308c\u307e\u305b\u3093\u3067\u3057\u305f
-typeCommandsForBreakpoint=\\u30D6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u306b\u9054\u3057\u305f\u3089\u3001\u30b3\u30de\u30f3\u30c9\u3092\u5165\u529b\u3057\u307e\u3059\u3002\u3053\u306e\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306f\u5404\u884c\u306b 1 \u3064\u3042\u308a\u307e\u3059\u3002\n'end' 
-breakpointNowUnconditional=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u304c\u89e3\u9664\u3055\u308c\u307e\u3057\u305f\u3002
-watchpointCouldNotBeSet='${expression}' \u306b\u5bfe\u3059\u308b\u76e3\u8996\u30dd\u30a4\u30f3\u30c8\u3092\u8a2d\u5b9a\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f
-
-changedWatchpointMode=\u5f0f '${expression}' \u306e\u76e3\u8996\u30dd\u30a4\u30f3\u30c8 ${watchpointNumber} \u304c ${watchpointMode} \u306b\u306a\u308a\u307e\u3057\u305f
-# the following three strings are inserted into the above 'changedWatchpointMode' string at the ${watchpontMode} location
-watchpointMode_read=read
-watchpointMode_write=write
-watchpointMode_readWrite=read-write
-
-createdWatchpoint=\u5f0f '${expression}' \u306b\u76e3\u8996\u30dd\u30a4\u30f3\u30c8 ${watchpointNumber} \u304c\u8a2d\u5b9a\u3055\u308c\u3066\u3044\u307e\u3059
-couldNotFindWatchpoint='${variable}' \u306b\u5bfe\u3059\u308b\u76e3\u8996\u51e6\u7406\u3092\u691c\u51fa\u307e\u305f\u306f\u524a\u9664\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-noDisplayNumber=\u8868\u793a\u756a\u53f7 ${displayNumber} \u304c\u3042\u308a\u307e\u305b\u3093
-badDisplayNumber='${token}' \u307e\u305f\u306f\u305d\u306e\u8fd1\u304f\u306b\u3001\u4e0d\u6b63\u306a\u8868\u793a\u756a\u53f7\u304c\u3042\u308a\u307e\u3059
-breakpointLocationNoLongerExists=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8 ${breakpointNumber} \u306b\u5bfe\u3059\u308b\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u3068\u884c\u756a\u53f7\u306f\u3001\u5b58\u5728\u3057\u3066\u3044\u307e\u305b\u3093
-unknownCommand=\u4e0d\u660e\u306a\u30b3\u30de\u30f3\u30c9 [${command}] \u304c\u898b\u3064\u304b\u308a\u307e\u3057\u305f\u3002\u3053\u306e\u30b3\u30de\u30f3\u30c9\u306f\u7121\u8996\u3055\u308c\u307e\u3059\u3002
-unknownSubcommand=\u4e0d\u660e\u306a ${commandCategory} \u30b3\u30de\u30f3\u30c9 '${command}' \u304c\u898b\u3064\u304b\u308a\u307e\u3057\u305f\u3002\u3053\u306e\u30b3\u30de\u30f3\u30c9\u306f\u7121\u8996\u3055\u308c\u307e\u3059
-unknownEvent=\u578b '${type}' \u306e\u4e0d\u660e\u306a\u30a4\u30d9\u30f3\u30c8\u3092\u53d7\u4fe1\u3057\u307e\u3057\u305f\u3002\u60c5\u5831 = ${info}\u3002
-problemWithConnection=\u30bb\u30c3\u30b7\u30e7\u30f3\u63a5\u7d9a\u306b\u95a2\u3059\u308b\u554f\u984c\u304c\u767a\u751f\u3057\u307e\u3057\u305f ('${socketErrorMessage}')\u3002\u30bb\u30c3\u30b7\u30e7\u30f3\u306e 'kill' \u3092\u304a\u52e7\u3081\u3057\u307e\u3059\u3002
-unexpectedErrorWithStackTrace=\u30b3\u30de\u30f3\u30c9\u306e\u51e6\u7406\u4e2d\u306b\u3001\u4e88\u671f\u3057\u306a\u3044\u30a8\u30e9\u30fc\u304c\u767a\u751f\u3057\u307e\u3057\u305f\u3002\n\u8a3a\u65ad\u3092\u884c\u3046\u305f\u3081\u3001\u7d9a\u3044\u3066\u30b9\u30bf\u30c3\u30af\u30c8\u30ec\u30fc\u30b9\u304c\u5b9f\u884c\u3055\u308c\u307e\u3059 : 
-ambiguousCommand=\u30b3\u30de\u30f3\u30c9 '${input}' \u304c\u3042\u3044\u307e\u3044\u3067\u3059 :
-faultHasNoTableEntry=\u30d5\u30a9\u30eb\u30c8 ${faultName} \u306b\u30c6\u30fc\u30d6\u30eb\u30a8\u30f3\u30c8\u30ea\u304c\u3042\u308a\u307e\u305b\u3093
-swfInfo="${swfName}" - ${size} \u30d0\u30a4\u30c8 (\u89e3\u51cd\u5f8c)\u3001${scriptCount} \u30b9\u30af\u30ea\u30d7\u30c8 ([#${min} - #${max}] ${plus} ${moreInfo})\u3001URL ${url}
-remainingSourceBeingLoaded=\u6b8b\u308a\u306e\u30bd\u30fc\u30b9\u306f\u307e\u3060\u30ed\u30fc\u30c9\u4e2d\u3067\u3059
-
-# the following string is appended to the end of any question; tells the user what to type
-yesOrNoAppendedToAllQuestions=(y \u307e\u305f\u306f n) 
-# the following string is what character the user should to answer "yes" to a yes/no question
-singleCharacterUserTypesForYes=y
-# a bunch of questions:
-askDeleteAllBreakpoints=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u3092\u3059\u3079\u3066\u524a\u9664\u3057\u307e\u3059\u304b?
-askDeleteAllAutoDisplay=auto-display \u5f0f\u3092\u3059\u3079\u3066\u524a\u9664\u3057\u307e\u3059\u304b?
-askKillProgram=\u30c7\u30d0\u30c3\u30b0\u4e2d\u306e\u30d7\u30ed\u30b0\u30e9\u30e0\u3092\u5f37\u5236\u7d42\u4e86\u3057\u307e\u3059\u304b?
-askProgramIsRunningExitAnyway=\u30d7\u30ed\u30b0\u30e9\u30e0\u306f\u5b9f\u884c\u4e2d\u3067\u3059\u3002\u7d42\u4e86\u3057\u307e\u3059\u304b?
-askReinitSourcePath=\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u3078\u306e\u30d1\u30b9\u3092\u518d\u521d\u671f\u5316\u3057\u3066\u7a7a\u306b\u3057\u307e\u3059\u304b?
-askExpressionContainsAssignment=\u5f0f\u306b\u4ee3\u5165\u8981\u7d20\u304c\u542b\u307e\u308c\u3066\u3044\u307e\u3059\u3002\u7d9a\u884c\u3057\u307e\u3059\u304b?
-# the following string is output if someone answers "no" to any of the above questions
-yesNoQueryNotConfirmed=\u78ba\u5b9a\u3055\u308c\u307e\u305b\u3093\u3067\u3057\u305f\u3002
-stopOnlyIfConditionMet=${breakpointCondition} \u306e\u5834\u5408\u306b\u306e\u307f\u4e2d\u6b62\u3057\u307e\u3059
-breakpointAlreadyHit=\u30d6\u30ec\u30fc\u30af\u30dd\u30a4\u30f3\u30c8\u306f\u65e2\u306b ${count} \u56de\u51fa\u73fe\u3057\u3066\u3044\u307e\u3059
-silentBreakpoint=silent
-getterFunction=Getter
-setterFunction=Setter
-function=\u95a2\u6570
-unknownVariableType=<\u4e0d\u660e>
-variableAttribute_dontEnumerate=\u5217\u6319\u3057\u306a\u3044
-variableAttribute_readOnly=read-only
-variableAttribute_localVariable=local
-variableAttribute_functionArgument=argument
-variableAttribute_getterFunction=getter
-variableAttribute_setterFunction=setter
-variableAttribute_hasNamespace=\u540d\u524d\u7a7a\u9593\u306e\u8a2d\u5b9a
-key16=\u53d7\u4fe1\u3057\u305f\u30e1\u30c3\u30bb\u30fc\u30b8 :
-key17=\u9001\u4fe1\u3055\u308c\u305f\u30e1\u30c3\u30bb\u30fc\u30b8 :
-key18=\u30bd\u30fc\u30b9\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key19=\u95a2\u6570\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key20=\u95a2\u6570\u30ea\u30b9\u30c8\u3092\u30d0\u30c3\u30af\u30b0\u30e9\u30a6\u30f3\u30c9\u3067\u6e96\u5099\u4e2d\u3067\u3059\u3002\u5f8c\u3067\u3082\u3046\u4e00\u5ea6\u5b9f\u884c\u3057\u3066\u304f\u3060\u3055\u3044\u3002
-key21=--- SessionManager \u306e\u30d7\u30ed\u30d1\u30c6\u30a3
-key22=--- \u30bb\u30c3\u30b7\u30e7\u30f3\u306e\u30d7\u30ed\u30d1\u30c6\u30a3
-stopped=Stopped
-key24=Player \u306f\u5b9f\u884c\u4e2d\u3067\u3059\u3002
-key25=\u30d6\u30ec\u30fc\u30af\u60c5\u5831\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key26=\u5909\u6570\u304c\u4e0d\u660e\u3067\u3059
-key27=\u30bd\u30fc\u30b9\u60c5\u5831\u304c\u4e0d\u660e\u3067\u3059\u3002\u73fe\u5728\u306e\u5834\u6240\u304c\u9006\u30a2\u30bb\u30f3\u30d6\u30eb\u3055\u308c\u307e\u3057\u305f
-key28=\u884c\u6307\u5b9a\u306e\u672b\u5c3e\u3067\u7834\u68c4\u3057\u307e\u3059
-key29=\u30d5\u30a1\u30a4\u30eb "${arg3}" \u306b\u5bfe\u3059\u308b SWF \u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key30=\u95a2\u6570\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key31=---- \u30b9\u30ad\u30c3\u30d7\u3055\u308c\u305f 0x${arg4} \u306b\u3042\u308b\u3001\u30de\u30c3\u30d4\u30f3\u30b0\u3055\u308c\u3066\u3044\u306a\u3044\u547d\u4ee4\u3092\u8868\u793a\u3057\u3066\u3044\u307e\u3059 ----
-key32=\u884c\u756a\u53f7 ${arg5} \u306f\u7bc4\u56f2\u5916\u3067\u3059\u3002\u30d5\u30a1\u30a4\u30eb "${arg6}" \u306e\u884c\u6570\u306f ${arg7} \u884c\u3067\u3059\u3002
-key33=\u30d5\u30a1\u30a4\u30eb\u304c\u898b\u3064\u304b\u308a\u307e\u305b\u3093\u3067\u3057\u305f
-key34=Player \u3067\u306f\u73fe\u5728\u3069\u306e\u30a2\u30af\u30b7\u30e7\u30f3\u3082\u4e2d\u65ad\u3055\u308c\u3066\u3044\u307e\u305b\u3093\u3002
-key35=\\u201d${swfName}\\u201d \u5185
-atAddress=\u30a2\u30c9\u30ec\u30b9 : ${address}
-haltedDueToFault=\u539f\u56e0 : ${fault}
-noWorkersRunning=\u5b9f\u884c\u4e2d\u306e\u30ef\u30fc\u30ab\u30fc\u306f\u3042\u308a\u307e\u305b\u3093\u3002


Mime
View raw message