fineract-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Shaik Nazeer" <nazeer.sh...@confluxtechnologies.com>
Subject RE: [Mifos-users] Creating unique external ID in mifos x
Date Fri, 20 Jan 2017 12:25:52 GMT
Yes, customer identifiers will be added after creating a client and there is no option to create
a data table with unique column definition so that it will be linked to client entity data
table check. 

You can raise an enhancement ticket in Jira. I hope some community member implements this
task. 

 

Thanks,

Nazeer 

Principal Architect,  <http://www.confluxtechnologies.com/> Conflux Technologies Pvt
Ltd

Address: #304, 2nd Floor, 7th Main Road, HRBR Layout 1st Block, Bengaluru, Karnataka, 560043
INDIA

unnamed

Disclaimer: The information contained in this e-mail message and any files/attachment transmitted
with it is confidential and for the sole use of the intended recipient(s) or entity identified.
If you are not the intended recipient, please email: support@confluxtechnologies.com and destroy/delete
all copies and attachment thereto along with the original message. Any unauthorized review,
use, disclosure, dissemination, forwarding, printing or copying of this email or any action
taken in reliance on this e-mail is strictly prohibited and is unlawful. The recipient acknowledges
that Conflux Technologies Private Limited or its subsidiaries and associated companies are
unable to exercise control or ensure or guarantee the integrity of/over the contents of the
information contained in e-mail transmissions. Before opening any attachments, please check.

 

From: Christopher Stewart [mailto:christopher.mckenzie.stewart@gmail.com] 
Sent: 20 January 2017 12:06
To: A good place to start for users or folks new to Mifos.
Cc: dev (dev@fineract.incubator.apache.org); Rajan Maurya
Subject: Re: [Mifos-users] Creating unique external ID in mifos x

 

Hi Nazeer, 

 

I require the national ID to be mandatory when creating a new client. Right now a client can
be created without an identifier even though it is unique. 

 

Rgds 

 

Chris 

 

On Jan 20, 2017 11:11 AM, "Nazeer Shaik" <nazeer.shaik@confluxtechnologies.com> wrote:

National ID should be part of the customer identifier and it is already unique. 
Can you explain bit more why it should be part of entity data table check?




Thanks,
Nazeer 

Principal Architect,  <http://www.confluxtechnologies.com/> Conflux Technologies Pvt
Ltd

Address: #304, 2nd Floor, 7th Main Road, HRBR Layout 1st Block, Bengaluru, Karnataka, 560043
INDIA

  <https://docs.google.com/uc?export=download&id=0B5kRPFzcTTMyT1NIdzN1Y0Rva2M&revid=0B5kRPFzcTTMyNlJBb3FIdUpzeS8xSlVLdTRlQkhSUkM1dnpzPQ>


Disclaimer: The information contained in this e-mail message and any files/attachment transmitted
with it is confidential and for the sole use of the intended recipient(s) or entity identified.
If you are not the intended recipient, please email:  <mailto:support@confluxtechnologies.com>
support@confluxtechnologies.com and destroy/delete all copies and attachment thereto along
with the original message. Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on this e-mail is strictly
prohibited and is unlawful. The recipient acknowledges that Conflux Technologies Private Limited
or its subsidiaries and associated companies are unable to exercise control or ensure or guarantee
the integrity of/over the contents of the information contained in e-mail transmissions. Before
opening any attachments, please check.

 

On Fri, Jan 20, 2017 at 10:27 AM, Christopher Stewart <christopher.mckenzie.stewart@gmail.com>
wrote:

Hello all, 

 

I have a request to ensure that the national ID be a unique and mandatory field for all clients.
So when a client is created this should be verified. 

I looked at the entity data table check feature but it does not verify the entry is unique.


 

I'm sure this is not a unique requirement and hope someone can help me out. 

 

Thanks in advance

 

Chris 

 

On Jan 11, 2017 1:59 AM, "Rajan Maurya" <rajanmaurya154@gmail.com> wrote:

Hi Christopher,

 

App code base has changed a lot and working fine. 

I have emailed you the latest APK please check and we are going to release the app very soon
on play store.




  <https://mailtrack.io/trace/mail/64030fa7ccd1c6b2379a820725db7ccddc71e9ca.png?u=692544>


 

On Tue, Jan 10, 2017 at 3:07 PM, Christopher Stewart <christopher.mckenzie.stewart@gmail.com>
wrote:

Hi,

Has anyone managed to connect and use the mifos Android client
successfully?

I see many posts regarding connection failures and I myself are getting the
'there was some issue processing your request' error.

My mifos instance is hosted on an ip address and not domain name. Ex:
204.xxx.xxx.xxx/#/ port 80.

The isn't version is 3 and I have the November 2016 version of mifos
running.

Any help would be greatly appreciated.

Thanks in advance

Chris

On Dec 23, 2016 7:48 PM, "Sander van der Heyden" <
sandervanderheyden@musonisystem.com> wrote:

Hi Adi,

We are wondering whether you had a chance to look at the interest
calculation excel? We are still unable to reconcile amounts for subsequent
instalments.

In addition we've also started seeing more problems with loans that are
prepaid significantly early on in the schedule, unfortunately I cannot test
this on the demo as the ability to create new loans seems to be broken
right now.

Thanks,
Sander van der Heyden



On 15 December 2016 at 11:16, Sander van der Heyden <
sandervanderheyden@musonisystem.com> wrote:

> Hi Adi,
>
> Was wondering if you had seen my previous mail?
>
> In addition we've also got an issue when backdating the interest
> recalculation loans that have compounding on Interest enabled, and use the
> "Same as repayment period" compounding type for interest and principal.
> This sample loan (https://demo.openmf.org/#/loanaccount/333/disburse)  cannot
> be disbursed as a result of an EMI error:

> *error.msg.loanschedule.emi.amount.must.be.greter.than.interest*, when


> you disburse with date of 1st of October.
>
> If you try to disburse as per 1st of November then it does work fine,
> which leads me to believe there is an issue in the error handling around
> compounding for backdated loans. As there are no params on a loan level,
> that we can adjust to not trigger interest recalculation when disbursing
> I'm not sure how to get around this one?
>
> Thanks,
> Sander
>
>
>
>
> Sander van der Heyden
>
> CTO Musoni Services
>
>
>
>

> Mobile (NL): +31 (0)6 14239505 <tel:+31%206%2014239505> 
> Skype: s.vdheyden
> Website: musonisystem.com
> Follow us on Twitter!  <https://twitter.com/musonimfi>
> Postal address: Hillegomstraat 12-14, office 0.09, 1058 LS, Amsterdam,
> The Netherlands
>

> On 13 December 2016 at 08:52, Sander van der Heyden <
> sandervanderheyden@musonisystem.com> wrote:
>
>> Hi Adi,
>>
>> Thanks for your feedback, but not sure whether we can make this
>> calculation work, see attached excel using the same logic. It works fine
>> for working out instalment one, but does leave us with a 0.4 difference on
>> the second instalment compared to today's schedule. Could you let me know
>> where we are going wrong, or whether this is actually a bug?
>>
>> Thanks,
>> Sander
>>
>>
>>
>> On 12 December 2016 at 06:20, Adi Raju <adi.raju@confluxtechnologies.com>
>> wrote:
>>
>>> Interest calculation on future dates will be based on the assumption
>>> that payment has been made up-to-date and assuming no arrears.
>>> Interest on the unpaid or compounded amount will be calculated and
>>> provided as part of schedule only till as of that day.
>>>
>>> So in the example,
>>> EMI is due on 1st  Dec and 2nd Jan. No repayment is made as of today
>>> (12/12).
>>> So interest calculation will be as follows:
>>> Interest on compounded amount as of 1 Dec for 11 days (1st to 12th of
>>> dec)
>>> Plus
>>> Interest on amount as per original schedule for 21 days (13th dec to 2nd
>>> of jan)
>>>
>>> As and when interest recalculation job runs every day, interest will be
>>> revised to include calculations as of that day.
>>>
>>> Regards,
>>> Adi Raju
>>>
>>> Principal Architect, Conflux Technologies Pvt Ltd
>>> Address: #304, 2nd Floor, 7th Main Road, HRBR Layout 1st Block,
>>> Bengaluru, Karnataka, 560043 INDIA
>>>
>>>
>>> Disclaimer: The information contained in this e-mail message and any
>>> files/attachment transmitted with it is confidential and for the sole use
>>> of the intended recipient(s) or entity identified. If you are not the
>>> intended recipient, please email: support@confluxtechnologies.com and
>>> destroy/delete all copies and attachment thereto along with the original
>>> message. Any unauthorised review, use, disclosure, dissemination,
>>> forwarding, printing or copying of this email or any action taken in
>>> reliance on this e-mail is strictly prohibited and is unlawful. The
>>> recipient acknowledges that Conflux Technologies Private Limited or its
>>> subsidiaries and associated companies are unable to exercise control or
>>> ensure or guarantee the integrity of/over the contents of the information
>>> contained in e-mail transmissions. Before opening any attachments, please
>>> check.
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Sander van der Heyden [mailto:sandervanderheyden@musonisystem.com]
>>> Sent: 09 December 2016 22:08
>>> To: dev@fineract.incubator.apache.org
>>> Cc: A good place to start for users or folks new to Mifos.
>>> Subject: Re: Issues in interest recalculation
>>>
>>> Hi Adi,
>>>
>>> Thanks for your feedback, makes sense on the early payments and I agree
>>> the duplicate instalments is a bug. Looks like the holiday/workingdays
>>> config is ignored for that bit. However I think we'll indeed need to
>>> introduce this in the payment schedules as well. In addition I found
>>> another strange scenario which is: https://demo.openmf.org/#/view
>>> loanaccount/321
>>>
>>> Can you explain to me how the calculation for the interest for the 2nd
>>> instalment is made, so the first instalment which was due 8 days ago is now
>>> overdue by 8 days and interest (should have) compounded as well. However I
>>> cannot work out the formula used to get to that amount of interest, when
>>> running the same example for a loan just 1 day overdue, I was able to work
>>> out the amount, but only as long as I calculated 2 extra days. Is there any
>>> docs on this on the wiki (I could not spot them).
>>>
>>> Thanks,
>>> Sander
>>>
>>>
>>>
>>> Sander van der Heyden
>>>
>>> CTO Musoni Services
>>>
>>>
>>>
>>>
>>> Mobile (NL): +31 (0)6 14239505 <tel:+31%206%2014239505> 
>>> Skype: s.vdheyden
>>> Website: musonisystem.com
>>> Follow us on Twitter!  <https://twitter.com/musonimfi> Postal address:
>>> Hillegomstraat 12-14, office 0.09, 1058 LS, Amsterdam, The Netherlands
>>>
>>> On 8 December 2016 at 06:23, Adi Raju <adi.raju@confluxtechnologies.com>
>>> wrote:
>>>
>>> > Hi Sander
>>> >
>>> > PSB
>>> >
>>> > Regards,
>>> > Adi Raju
>>> >
>>> > Principal Architect, Conflux Technologies Pvt Ltd
>>> > Address: #304, 2nd Floor, 7th Main Road, HRBR Layout 1st Block,
>>> > Bengaluru, Karnataka, 560043 INDIA
>>> >
>>> >
>>> > Disclaimer: The information contained in this e-mail message and any
>>> > files/attachment transmitted with it is confidential and for the sole
>>> > use of the intended recipient(s) or entity identified. If you are not
>>> > the intended recipient, please email: support@confluxtechnologies.com
>>> > and destroy/delete all copies and attachment thereto along with the
>>> > original message. Any unauthorised review, use, disclosure,
>>> > dissemination, forwarding, printing or copying of this email or any
>>> > action taken in reliance on this e-mail is strictly prohibited and is
>>> > unlawful. The recipient acknowledges that Conflux Technologies Private
>>> > Limited or its subsidiaries and associated companies are unable to
>>> > exercise control or ensure or guarantee the integrity of/over the
>>> > contents of the information contained in e-mail transmissions. Before
>>> > opening any attachments, please check.
>>> >
>>> >
>>> >
>>> >
>>> > -----Original Message-----
>>> > From: Sander van der Heyden
>>> > [mailto:sandervanderheyden@musonisystem.com]
>>> > Sent: 07 December 2016 22:24
>>> > To: dev@fineract.incubator.apache.org
>>> > Cc: A good place to start for users or folks new to Mifos.
>>> > Subject: Re: Issues in interest recalculation
>>> >
>>> > Hi Adi,
>>> >
>>> > Thanks for your feedback. I already left some test cases on the demo
>>> > (but have updated the same product in between so you'll need to check
>>> > the derived data for these). I'll work on some more cases that we've
>>> > seen locally tomorrow, but these are the ones that were already there.
>>> >
>>> >
>>> > *Incorrect interest in Loan Schedule for first instalment when making
>>> > an early payment* See https://demo.openmf.org/#/viewloanaccount/302,
>>> > where you see 3.85 of interest paid on the summary and loan
>>> > transactions, yet the
>>> > 3.85 is still due on the instalment and if you look at the schedule
>>> > via the API is reported as outstanding interest (which the transaction
>>> > has already paid).
>>> >
>>> > [Adi] In case of interest recalculation enabled loans, there is no way
>>> > to realise a complete EMI components whose due date is in the future.
>>> > Any early payments gets adjusted to the principal, and hence there
>>> > will be some interest component which will remain due as of the future
>>> > due date. From calculations or schedule point of view the early paid
>>> > amount is completely getting adjusted to Principal and interest is
>>> pending.
>>> > Repayment strategy decides the splitting of components in a
>>> transaction.
>>> > Looks like the repayment strategy needs a correction not to consider
>>> > the interest component in case of early payment.
>>> >
>>> > *Interest recalculation causes incorrect schedule with duplicate
>>> > instalments* For the daily loans with duplicate instalments see:
>>> > https://demo.openmf.org/#/viewloanaccount/304, where you can see that
>>> > 2 payments fall due on the same day. If you undo disburse the loan and
>>> > preview the schedule before disbursement you'll not see duplicate
>>> > payments on the same day.
>>> > [Adi] As I see original schedule is fine, but during repayments some
>>> > duplicates are seen. This is definitely a bug.
>>> >
>>> > Thanks,
>>> > Sander
>>> >
>>> >
>>> >
>>> >
>>> > Sander van der Heyden
>>> >
>>> > CTO Musoni Services
>>> >
>>> >
>>> >
>>> >
>>> > Mobile (NL): +31 (0)6 14239505 <tel:+31%206%2014239505> 
>>> > Skype: s.vdheyden
>>> > Website: musonisystem.com
>>> > Follow us on Twitter!  <https://twitter.com/musonimfi> Postal address:
>>> > Hillegomstraat 12-14, office 0.09, 1058 LS, Amsterdam, The Netherlands
>>> >
>>> > On 7 December 2016 at 11:20, Adi Raju
>>> > <adi.raju@confluxtechnologies.com>
>>> > wrote:
>>> >
>>> > > Hi Sander,
>>> > >
>>> > > Interest recalculation is allowed only when "Calculate interest for
>>> > > exact days in partial period" is enabled in product definition.
>>> > > Consider the scenario: holidays calendar is empty, all days are
>>> > > considered working days and payments are always on time, you will
>>> > > see the interest applied equally with interest rate 1% considering
>>> > > 12%pa interest with monthly payment period.
>>> > >
>>> > > In case there is any date difference due to holidays/working days
>>> > > consideration or early payments etc, the calculation happens as
>>> follows:
>>> > > Assume installment is falling on 1st Feb, but due to holiday the
>>> > > installment is postponed to 2nd Feb and consider 12%pa interest rate.
>>> > > Interest for the whole month of Jan is calculated at 1% and interest
>>> > > for the 1 additional day in Feb is calculated as 1%*(1/28).
>>> > > For the installment on 1st Mar, interest is calculated as 1%*(27/28)
>>> > > would be used.
>>> > > This is how the current interest recalculation happens to make sure
>>> > > the interest is collected for each and every day.
>>> > > And partial interest for any day is calculated based on the number
>>> > > of days in the loan installment period.
>>> > >
>>> > > I am unable to reproduce other issues that you have mentioned. Looks
>>> > > like they are linked to some other factors as well. If you can
>>> > > reproduce them on demo.openmf.org and provide with loan ids or
>>> > > relevant details, we can get back with clarifications or verify if
>>> > > it is
>>> > really a bug.
>>> > >
>>> > > Regards,
>>> > > Adi Raju
>>> > >
>>> > > Principal Architect, Conflux Technologies Pvt Ltd
>>> > > Address: #304, 2nd Floor, 7th Main Road, HRBR Layout 1st Block,
>>> > > Bengaluru, Karnataka, 560043 INDIA
>>> > >
>>> > >
>>> > > Disclaimer: The information contained in this e-mail message and any
>>> > > files/attachment transmitted with it is confidential and for the
>>> > > sole use of the intended recipient(s) or entity identified. If you
>>> > > are not the intended recipient, please email:
>>> > > support@confluxtechnologies.com and destroy/delete all copies and
>>> > > attachment thereto along with the original message. Any unauthorised
>>> > > review, use, disclosure, dissemination, forwarding, printing or
>>> > > copying of this email or any action taken in reliance on this e-mail
>>> > > is strictly prohibited and is unlawful. The recipient acknowledges
>>> > > that Conflux Technologies Private Limited or its subsidiaries and
>>> > > associated companies are unable to exercise control or ensure or
>>> > > guarantee the integrity of/over the contents of the information
>>> > > contained in e-mail transmissions. Before opening any attachments,
>>> please check.
>>> > >
>>> > >
>>> > >
>>> > >
>>> > > -----Original Message-----
>>> > > From: Sander van der Heyden
>>> > > [mailto:sandervanderheyden@musonisystem.com]
>>> > > Sent: 05 December 2016 17:06
>>> > > To: dev@fineract.incubator.apache.org; A good place to start for
>>> > > users or folks new to Mifos.
>>> > > Subject: Issues in interest recalculation
>>> > >
>>> > > Hi All,
>>> > >
>>> > > We've been doing a relatively extensive round of testing on interest
>>> > > recalculation loans and found the following issues (on
>>> demo.openmf.org).
>>> > > All of the cases below have:
>>> > > - Interest recalculation on
>>> > > - Interest calculation = same as repayment period
>>> > > - Amortization set to Equal instalments
>>> > > - Advance payments set to Reduce EMI Amount
>>> > > - No grace periods
>>> > > - No sliding interest rates, or multi-disbursements
>>> > > - No fixed EMI amounts
>>> > >
>>> > > I've not yet created JIRA items on it, because I was wondering
>>> > > whether other people had seen these and there was a work-around by
>>> > > specifying the right params? Also when trying to debug some of this
>>> > > I think the calculations have now been made so incredibly complex
>>> > > that it is very hard to fix some of these without creating other
>>> bugs in exchange.
>>> > >
>>> > > *Daily interest on Same as Repayment period* On monthly loans, even
>>> > > though same as repayment period is selected, the interest
>>> > > calculation seems to happen on a daily basis. We see jumps up and
>>> > > down in the schedule, which should not happen especially before any
>>> > > payments are made, as in that case the interest calculation should
>>> > > be identical for each month (we are using same as repayment period)
>>> > > and therefore the interest amount should always drop month over
>>> > > month, with principal
>>> > going up.
>>> > >
>>> > > *Incorrect interest in Loan Schedule for first instalment when
>>> > > making an early payment* When setting up any interest recalculation
>>> > > loan, and making an early payment on the first instalment, this
>>> > > updates the schedule with all of it going to principal, leaving the
>>> > > interest outstanding. However the actual transaction does split part
>>> > > of it to interest and so does the loan summary.
>>> > > In subsequent instalments this no longer happens.
>>> > >
>>> > > *Interest recalculation causes incorrect schedule with duplicate
>>> > > instalments*
>>> > > On a daily loan, when an installment was originally due on a weekend
>>> > > day, it get's pushed forward, skipping that day correctly. However
>>> > > in recalculation this is no longer happening therefore introducing
2
>>> > > installments on the same date one with a 0 length. So what happens
>>> > > is pre-correction you have an instalment on the 3rd of December,
>>> > > then one on the 5th (skipping sunday). After the payment and
>>> > > recalculation it has 2 instalments due on the 5th, one with 0 days
>>> and no interest.
>>> > >
>>> > > *Single instalment loans do not recalculate* When a loan with 1
>>> > > instalment is created and the client prepays on that one instalment,
>>> > > interest is not recalculated.
>>> > >
>>> > > *Early payment of all principal throws an EMI error* When repaying
>>> > > the full principal due on the loan in an early instalment it throws
>>> > > an EMI error, which should not happen, there is still a bit of
>>> > > interest to pay, but no more principal. This means the schedule
>>> > > should just show that interest remaining (or close the loan as there
>>> is no interest).
>>> > >
>>> > >
>>> > > Thanks,
>>> > > Sander
>>> > >
>>> > >
>>> >
>>> >
>>>
>>>
>>
>

------------------------------------------------------------
------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/intel
_______________________________________________
Mifos-users mailing list
Mifos-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mifos-users





 

-- 

Thanks

Namaste

 

Rajan Maurya

Contact Number : +91 9015090523 <tel:+91%2090150%2090523> 

Github: https://github.com/therajanmaurya

College: Cluster Innovation Centre, University of Delhi

Student : B.Tech. (Information Technology & Mathematical Innovations)

 

 

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot


_______________________________________________
Mifos-users mailing list
Mifos-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mifos-users

 


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Mifos-users mailing list
Mifos-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mifos-users

 


Mime
  • Unnamed multipart/related (inline, None, 0 bytes)
View raw message