db-derby-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Peter Ondruska" <peter.ondru...@gmail.com>
Subject Re: AW: AW: somtimes no connect
Date Wed, 06 Dec 2006 16:26:27 GMT
I guess you must be using Windows. Try to disable network connection
detection (not sure how it is named precisely, see your network card
settings--I have become Mac user...)

On 12/6/06, Steffen Winkler <steffen.winkler@danprodukte.de> wrote:
> Thank you Stan.
>
> We come closer to the solution:
>
> Application, database and Network server is installed on the same computer
> (Laptop).
> Url contains computername (e.g. danxpu73).
>
> If the network-cable is plugged off, the connection closes with following
> error:
>  -4499: A communications error has been detected: Connection reset by peer:
> socket write error.
>
> Restart the application and ping leads to the error:
> DRDA_NoIO.S:Es konnte keine Verbindung zu Derby Network Server auf dem Host
> danxpu73, Port 1527, hergestellt werden.
> That means "no connection possible".
>
> Shutdown the server leads to the error:
> -4499 java.net.NoRouteToHostException : Error connecting to server danxpu73
> on port 1527 with message No route to host: connect.
> Restarting the Network-Sever solves this problem.
>
> If the network-cable is plugged off and re-plugged in, then new connection
> of the application is possible.
>
> Similar problems occur, when I use IP-Number instead of computername.
>
> No problem occurs, when I use "localhost".
>
>
>
> -----Urspr√ľngliche Nachricht-----
> Von: Stanley Bradbury [mailto:Stan.Bradbury@gmail.com]
> Gesendet: Dienstag, 5. Dezember 2006 19:30
> An: Derby Discussion
> Betreff: Re: AW: somtimes no connect
>
>
> Steffen Winkler wrote:
> > Thank you for reply.
> >
> >> Check to be sure that the application does not shutdown the Network
> Server
> >>
> > when it shutsdown.
> > If the network server was shutdown, i should see it in the log. But the
> log
> > shows that the network server was shut down after the ConnectException.
> > Are there any other reasons why connection was not possible?
> >
> >
> ==  SNIP ===
>
> I've seen instances where the Network server has been terminated without
> any messages being sent so I recommend testing availability using
> 'NetworkServerControl sysinfo' or 'ping'.  If these commands indicate
> that the Network Server is running and the application still cannot
> connect I would check that the correct hostname and port are being
> supplied on the connection URL.  To remove any possible problems
> stemming from name resolution perform a test using the IP address of the
> server machine rather than 'localhost' or the hostname.
>
> I hope these guesses help.  You might try to create a small test case
> that could be used to demonstrate the problem.  Knowing the specifics of
> the configurations of the client, server and seeing the code that
> manages the Server and the establishes the client connection would help
> in looking into this further and, if this is a bug, filing a Jira bug
> entry for the problem.
>
>
>
>

Mime
View raw message