corinthia-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From j...@apache.org
Subject [57/83] [abbrv] incubator-corinthia git commit: removed zlib
Date Mon, 23 Mar 2015 16:19:45 GMT
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com b/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
deleted file mode 100644
index 65e9d0c..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
+++ /dev/null
@@ -1,867 +0,0 @@
-$! make libz under VMS written by
-$! Martin P.J. Zinser
-$!
-$! In case of problems with the install you might contact me at
-$! zinser@zinser.no-ip.info(preferred) or
-$! martin.zinser@eurexchange.com (work)
-$!
-$! Make procedure history for Zlib
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20060120 First version to receive a number
-$! 0.02 20061008 Adapt to new Makefile.in
-$! 0.03 20091224 Add support for large file check
-$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
-$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
-$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
-$!               subdir path, update module search in makefile.in
-$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
-$!               shared image creation
-$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
-$!               image
-$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
-$!               "" -> automatic, preference: MMK, MMS, built-in.
-$!
-$ on error then goto err_exit
-$!
-$ true  = 1
-$ false = 0
-$ tmpnam = "temp_" + f$getjpi("","pid")
-$ tt = tmpnam + ".txt"
-$ tc = tmpnam + ".c"
-$ th = tmpnam + ".h"
-$ define/nolog tconfig 'th'
-$ its_decc = false
-$ its_vaxc = false
-$ its_gnuc = false
-$ s_case   = False
-$!
-$! Setup variables holding "config" information
-$!
-$ Make    = "''p1'"
-$ name     = "Zlib"
-$ version  = "?.?.?"
-$ v_string = "ZLIB_VERSION"
-$ v_file   = "zlib.h"
-$ ccopt   = "/include = []"
-$ lopts   = ""
-$ dnsrl   = ""
-$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
-$ conf_check_string = ""
-$ linkonly = false
-$ optfile  = name + ".opt"
-$ mapfile  = name + ".map"
-$ libdefs  = ""
-$ vax      = f$getsyi("HW_MODEL").lt.1024
-$ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
-$ ia64     = f$getsyi("HW_MODEL").ge.4096
-$!
-$! 2012-03-05 SMS.
-$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
-$!
-$!!! if axp .or. ia64 then  set proc/parse=extended
-$!
-$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
-$ mydef  = F$parse(whoami,,,"DEVICE")
-$ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
-$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
-$!
-$! Check for MMK/MMS
-$!
-$ if (Make .eqs. "")
-$ then
-$   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
-$   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$ else
-$   Make = f$edit( Make, "trim")
-$ endif
-$!
-$ gosub find_version
-$!
-$  open/write topt tmp.opt
-$  open/write optf 'optfile'
-$!
-$ gosub check_opts
-$!
-$! Look for the compiler used
-$!
-$ gosub check_compiler
-$ close topt
-$ close optf
-$!
-$ if its_decc
-$ then
-$   ccopt = "/prefix=all" + ccopt
-$   if f$trnlnm("SYS") .eqs. ""
-$   then
-$     if axp
-$     then
-$       define sys sys$library:
-$     else
-$       ccopt = "/decc" + ccopt
-$       define sys decc$library_include:
-$     endif
-$   endif
-$!
-$! 2012-03-05 SMS.
-$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
-$!
-$   if axp .or. ia64
-$   then
-$       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
-$       s_case = true
-$   endif
-$ endif
-$ if its_vaxc .or. its_gnuc
-$ then
-$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ endif
-$!
-$! Build a fake configure input header
-$!
-$ open/write conf_hin config.hin
-$ write conf_hin "#undef _LARGEFILE64_SOURCE"
-$ close conf_hin
-$!
-$!
-$ i = 0
-$FIND_ACONF:
-$ fname = f$element(i,"#",aconf_in_file)
-$ if fname .eqs. "#" then goto AMISS_ERR
-$ if f$search(fname) .eqs. ""
-$ then
-$   i = i + 1
-$   goto find_aconf
-$ endif
-$ open/read/err=aconf_err aconf_in 'fname'
-$ open/write aconf zconf.h
-$ACONF_LOOP:
-$ read/end_of_file=aconf_exit aconf_in line
-$ work = f$edit(line, "compress,trim")
-$ if f$extract(0,6,work) .nes. "#undef"
-$ then
-$   if f$extract(0,12,work) .nes. "#cmakedefine"
-$   then
-$       write aconf line
-$   endif
-$ else
-$   cdef = f$element(1," ",work)
-$   gosub check_config
-$ endif
-$ goto aconf_loop
-$ACONF_EXIT:
-$ write aconf ""
-$ write aconf "/* VMS specifics added by make_vms.com: */"
-$ write aconf "#define VMS 1"
-$ write aconf "#include <unistd.h>"
-$ write aconf "#include <unixio.h>"
-$ write aconf "#ifdef _LARGEFILE"
-$ write aconf "# define off64_t __off64_t"
-$ write aconf "# define fopen64 fopen"
-$ write aconf "# define fseeko64 fseeko"
-$ write aconf "# define lseek64 lseek"
-$ write aconf "# define ftello64 ftell"
-$ write aconf "#endif"
-$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
-$ write aconf "# define HAVE_VSNPRINTF"
-$ write aconf "#endif"
-$ close aconf_in
-$ close aconf
-$ if f$search("''th'") .nes. "" then delete 'th';*
-$! Build the thing plain or with mms
-$!
-$ write sys$output "Compiling Zlib sources ..."
-$ if make.eqs.""
-$ then
-$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
-$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
-$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zlib.h zconf.h
-$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
-                compress.c zlib.h zconf.h
-$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zlib.h zconf.h
-$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflate.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
-                gzclose.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
-                gzlib.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
-                gzread.c zutil.h zlib.h zconf.h
-$   CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
-                gzwrite.c zutil.h zlib.h zconf.h
-$   CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
-                infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
-                inffast.c zutil.h zlib.h zconf.h inffast.h
-$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
-                inflate.c zutil.h zlib.h zconf.h infblock.h
-$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
-                inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
-                trees.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
-                uncompr.c zlib.h zconf.h
-$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
-                zutil.c zutil.h zlib.h zconf.h
-$   write sys$output "Building Zlib ..."
-$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
-$   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
-                [.test]example.c zlib.h zconf.h
-$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   write sys$output "Building minigzip..."
-$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
-              [.test]minigzip.c zlib.h zconf.h
-$   call make minigzip.exe -
-              "LINK minigzip,libz.olb/lib" -
-              minigzip.obj libz.olb
-$ else
-$   gosub crea_mms
-$   write sys$output "Make ''name' ''version' with ''Make' "
-$   'make'
-$ endif
-$!
-$! Create shareable image
-$!
-$ gosub crea_olist
-$ write sys$output "Creating libzshr.exe"
-$ call map_2_shopt 'mapfile' 'optfile'
-$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
-$ write sys$output "Zlib build completed"
-$ delete/nolog tmp.opt;*
-$ exit
-$AMISS_ERR:
-$ write sys$output "No source for config.hin found."
-$ write sys$output "Tried any of ''aconf_in_file'"
-$ goto err_exit
-$CC_ERR:
-$ write sys$output "C compiler required to build ''name'"
-$ goto err_exit
-$ERR_EXIT:
-$ set message/facil/ident/sever/text
-$ close/nolog optf
-$ close/nolog topt
-$ close/nolog aconf_in
-$ close/nolog aconf
-$ close/nolog out
-$ close/nolog min
-$ close/nolog mod
-$ close/nolog h_in
-$ write sys$output "Exiting..."
-$ exit 2
-$!
-$!
-$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
-$ V = 'F$Verify(0)
-$! P1 = What we are trying to make
-$! P2 = Command to make it
-$! P3 - P8  What it depends on
-$
-$ If F$Search(P1) .Eqs. "" Then Goto Makeit
-$ Time = F$CvTime(F$File(P1,"RDT"))
-$arg=3
-$Loop:
-$       Argument = P'arg
-$       If Argument .Eqs. "" Then Goto Exit
-$       El=0
-$Loop2:
-$       File = F$Element(El," ",Argument)
-$       If File .Eqs. " " Then Goto Endl
-$       AFile = ""
-$Loop3:
-$       OFile = AFile
-$       AFile = F$Search(File)
-$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
-$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
-$       Goto Loop3
-$NextEL:
-$       El = El + 1
-$       Goto Loop2
-$EndL:
-$ arg=arg+1
-$ If arg .Le. 8 Then Goto Loop
-$ Goto Exit
-$
-$Makeit:
-$ VV=F$VERIFY(0)
-$ write sys$output P2
-$ 'P2
-$ VV='F$Verify(VV)
-$Exit:
-$ If V Then Set Verify
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Check command line options and set symbols accordingly
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20041206 First version to receive a number
-$! 0.02 20060126 Add new "HELP" target
-$ CHECK_OPTS:
-$ i = 1
-$ OPT_LOOP:
-$ if i .lt. 9
-$ then
-$   cparm = f$edit(p'i',"upcase")
-$!
-$! Check if parameter actually contains something
-$!
-$   if f$edit(cparm,"trim") .nes. ""
-$   then
-$     if cparm .eqs. "DEBUG"
-$     then
-$       ccopt = ccopt + "/noopt/deb"
-$       lopts = lopts + "/deb"
-$     endif
-$     if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
-$     then
-$       start = f$locate("=",cparm) + 1
-$       len   = f$length(cparm) - start
-$       ccopt = ccopt + f$extract(start,len,cparm)
-$       if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
-          then s_case = true
-$     endif
-$     if cparm .eqs. "LINK" then linkonly = true
-$     if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
-$     then
-$       start = f$locate("=",cparm) + 1
-$       len   = f$length(cparm) - start
-$       lopts = lopts + f$extract(start,len,cparm)
-$     endif
-$     if f$locate("CC=",cparm) .lt. f$length(cparm)
-$     then
-$       start  = f$locate("=",cparm) + 1
-$       len    = f$length(cparm) - start
-$       cc_com = f$extract(start,len,cparm)
-        if (cc_com .nes. "DECC") .and. -
-           (cc_com .nes. "VAXC") .and. -
-           (cc_com .nes. "GNUC")
-$       then
-$         write sys$output "Unsupported compiler choice ''cc_com' ignored"
-$         write sys$output "Use DECC, VAXC, or GNUC instead"
-$       else
-$         if cc_com .eqs. "DECC" then its_decc = true
-$         if cc_com .eqs. "VAXC" then its_vaxc = true
-$         if cc_com .eqs. "GNUC" then its_gnuc = true
-$       endif
-$     endif
-$     if f$locate("MAKE=",cparm) .lt. f$length(cparm)
-$     then
-$       start  = f$locate("=",cparm) + 1
-$       len    = f$length(cparm) - start
-$       mmks = f$extract(start,len,cparm)
-$       if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
-$       then
-$         make = mmks
-$       else
-$         write sys$output "Unsupported make choice ''mmks' ignored"
-$         write sys$output "Use MMK or MMS instead"
-$       endif
-$     endif
-$     if cparm .eqs. "HELP" then gosub bhelp
-$   endif
-$   i = i + 1
-$   goto opt_loop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Look for the compiler used
-$!
-$! Version history
-$! 0.01 20040223 First version to receive a number
-$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
-$! 0.03 20060202 Extend handling of GNU C
-$! 0.04 20090402 Compaq -> hp
-$CHECK_COMPILER:
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then
-$   its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
-$   its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
-$   its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
-$ endif
-$!
-$! Exit if no compiler available
-$!
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then goto CC_ERR
-$ else
-$   if its_decc
-$   then
-$     write sys$output "CC compiler check ... hp C"
-$     if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
-$     then
-$       dnrsl = f$trnlnm("decc$no_rooted_search_lists")
-$     endif
-$     define/nolog decc$no_rooted_search_lists 1
-$   else
-$     if its_vaxc then write sys$output "CC compiler check ... VAX C"
-$     if its_gnuc
-$     then
-$         write sys$output "CC compiler check ... GNU C"
-$         if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
-$         if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
-$         cc = "gcc"
-$     endif
-$     if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
-$     if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! If MMS/MMK are available dump out the descrip.mms if required
-$!
-$CREA_MMS:
-$ write sys$output "Creating descrip.mms..."
-$ create descrip.mms
-$ open/append out descrip.mms
-$ copy sys$input: out
-$ deck
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
-       gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
-       deflate.obj, trees.obj, zutil.obj, inflate.obj, \
-       inftrees.obj, inffast.obj
-
-$ eod
-$ write out "CFLAGS=", ccopt
-$ write out "LOPTS=", lopts
-$ write out "all : example.exe minigzip.exe libz.olb"
-$ copy sys$input: out
-$ deck
-        @ write sys$output " Example applications available"
-
-libz.olb : libz.olb($(OBJS))
-	@ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
-              link $(LOPTS) example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
-              link $(LOPTS) minigzip,libz.olb/lib
-
-clean :
-	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
-
-
-# Other dependencies.
-adler32.obj  : adler32.c zutil.h zlib.h zconf.h
-compress.obj : compress.c zlib.h zconf.h
-crc32.obj    : crc32.c zutil.h zlib.h zconf.h
-deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj  : [.test]example.c zlib.h zconf.h
-gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
-gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
-gzread.obj   : gzread.c zutil.h zlib.h zconf.h
-gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
-inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
-inflate.obj  : inflate.c zutil.h zlib.h zconf.h
-inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : [.test]minigzip.c zlib.h zconf.h
-trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
-uncompr.obj  : uncompr.c zlib.h zconf.h
-zutil.obj    : zutil.c zutil.h zlib.h zconf.h
-infback.obj  : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$ eod
-$ close out
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Read list of core library sources from makefile.in and create options
-$! needed to build shareable image
-$!
-$CREA_OLIST:
-$ open/read min makefile.in
-$ open/write mod modules.opt
-$ src_check_list = "OBJZ =#OBJG ="
-$MRLOOP:
-$ read/end=mrdone min rec
-$ i = 0
-$SRC_CHECK_LOOP:
-$ src_check = f$element(i, "#", src_check_list)
-$ i = i+1
-$ if src_check .eqs. "#" then goto mrloop
-$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
-$ rec = rec - src_check
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
-$MRSLOOP:
-$ read/end=mrdone min rec
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
-$MRDONE:
-$ close min
-$ close mod
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Take record extracted in crea_olist and split it into single filenames
-$!
-$EXTRA_FILNAM:
-$ myrec = f$edit(rec - "\", "trim,compress")
-$ i = 0
-$FELOOP:
-$ srcfil = f$element(i," ", myrec)
-$ if (srcfil .nes. " ")
-$ then
-$   write mod f$parse(srcfil,,,"NAME"), ".obj"
-$   i = i + 1
-$   goto feloop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Find current Zlib version number
-$!
-$FIND_VERSION:
-$ open/read h_in 'v_file'
-$hloop:
-$ read/end=hdone h_in rec
-$ rec = f$edit(rec,"TRIM")
-$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
-$ rec = f$edit(rec - "#", "TRIM")
-$ if f$element(0," ",rec) .nes. "define" then goto hloop
-$ if f$element(1," ",rec) .eqs. v_string
-$ then
-$   version = 'f$element(2," ",rec)'
-$   goto hdone
-$ endif
-$ goto hloop
-$hdone:
-$ close h_in
-$ return
-$!------------------------------------------------------------------------------
-$!
-$CHECK_CONFIG:
-$!
-$ in_ldef = f$locate(cdef,libdefs)
-$ if (in_ldef .lt. f$length(libdefs))
-$ then
-$   write aconf "#define ''cdef' 1"
-$   libdefs = f$extract(0,in_ldef,libdefs) + -
-              f$extract(in_ldef + f$length(cdef) + 1, -
-                        f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
-                        libdefs)
-$ else
-$   if (f$type('cdef') .eqs. "INTEGER")
-$   then
-$     write aconf "#define ''cdef' ", 'cdef'
-$   else
-$     if (f$type('cdef') .eqs. "STRING")
-$     then
-$       write aconf "#define ''cdef' ", """", '''cdef'', """"
-$     else
-$       gosub check_cc_def
-$     endif
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check if this is a define relating to the properties of the C/C++
-$! compiler
-$!
-$ CHECK_CC_DEF:
-$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
-$ then
-$   copy sys$input: 'tc'
-$   deck
-#include "tconfig"
-#define _LARGEFILE
-#include <stdio.h>
-
-int main(){
-FILE *fp;
-  fp = fopen("temp.txt","r");
-  fseeko(fp,1,SEEK_SET);
-  fclose(fp);
-}
-
-$   eod
-$   test_inv = false
-$   comm_h = false
-$   gosub cc_prop_check
-$   return
-$ endif
-$ write aconf "/* ", line, " */"
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler
-$!
-$! Version history
-$! 0.01 20031020 First version to receive a number
-$! 0.02 20031022 Added logic for defines with value
-$! 0.03 20040309 Make sure local config file gets not deleted
-$! 0.04 20041230 Also write include for configure run
-$! 0.05 20050103 Add processing of "comment defines"
-$CC_PROP_CHECK:
-$ cc_prop = true
-$ is_need = false
-$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
-$ if f$search(th) .eqs. "" then create 'th'
-$ set message/nofac/noident/nosever/notext
-$ on error then continue
-$ cc 'tmpnam'
-$ if .not. ($status)  then cc_prop = false
-$ on error then continue
-$! The headers might lie about the capabilities of the RTL
-$ link 'tmpnam',tmp.opt/opt
-$ if .not. ($status)  then cc_prop = false
-$ set message/fac/ident/sever/text
-$ on error then goto err_exit
-$ delete/nolog 'tmpnam'.*;*/exclude='th'
-$ if (cc_prop .and. .not. is_need) .or. -
-     (.not. cc_prop .and. is_need)
-$ then
-$   write sys$output "Checking for ''cdef'... yes"
-$   if f$type('cdef_val'_yes) .nes. ""
-$   then
-$     if f$type('cdef_val'_yes) .eqs. "INTEGER" -
-         then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
-$     if f$type('cdef_val'_yes) .eqs. "STRING" -
-         then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
-$   else
-$     call write_config f$fao("#define !AS 1",cdef)
-$   endif
-$   if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
-       (cdef .eqs. "_LARGEFILE64_SOURCE") then -
-      call write_config f$string("#define _LARGEFILE 1")
-$ else
-$   write sys$output "Checking for ''cdef'... no"
-$   if (comm_h)
-$   then
-      call write_config f$fao("/* !AS */",line)
-$   else
-$     if f$type('cdef_val'_no) .nes. ""
-$     then
-$       if f$type('cdef_val'_no) .eqs. "INTEGER" -
-           then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
-$       if f$type('cdef_val'_no) .eqs. "STRING" -
-           then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
-$     else
-$       call write_config f$fao("#undef !AS",cdef)
-$     endif
-$   endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler with multiple result values
-$!
-$! Version history
-$! 0.01 20040127 First version
-$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
-$CC_MPROP_CHECK:
-$ cc_prop = true
-$ i    = 1
-$ idel = 1
-$ MT_LOOP:
-$ if f$type(result_'i') .eqs. "STRING"
-$ then
-$   set message/nofac/noident/nosever/notext
-$   on error then continue
-$   cc 'tmpnam'_'i'
-$   if .not. ($status)  then cc_prop = false
-$   on error then continue
-$! The headers might lie about the capabilities of the RTL
-$   link 'tmpnam'_'i',tmp.opt/opt
-$   if .not. ($status)  then cc_prop = false
-$   set message/fac/ident/sever/text
-$   on error then goto err_exit
-$   delete/nolog 'tmpnam'_'i'.*;*
-$   if (cc_prop)
-$   then
-$     write sys$output "Checking for ''cdef'... ", mdef_'i'
-$     if f$type(mdef_'i') .eqs. "INTEGER" -
-         then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
-$     if f$type('cdef_val'_yes) .eqs. "STRING" -
-         then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
-$     goto msym_clean
-$   else
-$     i = i + 1
-$     goto mt_loop
-$   endif
-$ endif
-$ write sys$output "Checking for ''cdef'... no"
-$ call write_config f$fao("#undef !AS",cdef)
-$ MSYM_CLEAN:
-$ if (idel .le. msym_max)
-$ then
-$   delete/sym mdef_'idel'
-$   idel = idel + 1
-$   goto msym_clean
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Write configuration to both permanent and temporary config file
-$!
-$! Version history
-$! 0.01 20031029 First version to receive a number
-$!
-$WRITE_CONFIG: SUBROUTINE
-$  write aconf 'p1'
-$  open/append confh 'th'
-$  write confh 'p1'
-$  close confh
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Analyze the project map file and create the symbol vector for a shareable
-$! image from it
-$!
-$! Version history
-$! 0.01 20120128 First version
-$! 0.02 20120226 Add pre-load logic
-$!
-$ MAP_2_SHOPT: Subroutine
-$!
-$ SAY := "WRITE_ SYS$OUTPUT"
-$!
-$ IF F$SEARCH("''P1'") .EQS. ""
-$ THEN
-$    SAY "MAP_2_SHOPT-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
-$    goto exit_m2s
-$ ENDIF
-$ IF "''P2'" .EQS. ""
-$ THEN
-$    SAY "MAP_2_SHOPT:  Error, no output file provided"
-$    goto exit_m2s
-$ ENDIF
-$!
-$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
-$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
-$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
-$ module4 = "inflateSync#uncompress#zlibVersion#compress"
-$ open/read map 'p1
-$ if axp .or. ia64
-$ then
-$     open/write aopt a.opt
-$     open/write bopt b.opt
-$     write aopt " CASE_SENSITIVE=YES"
-$     write bopt "SYMBOL_VECTOR= (-"
-$     mod_sym_num = 1
-$ MOD_SYM_LOOP:
-$     if f$type(module'mod_sym_num') .nes. ""
-$     then
-$         mod_in = 0
-$ MOD_SYM_IN:
-$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$         if shared_proc .nes. "#"
-$         then
-$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
-        		       f$edit(shared_proc,"upcase"),shared_proc)
-$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$             mod_in = mod_in + 1
-$             goto mod_sym_in
-$         endif
-$         mod_sym_num = mod_sym_num + 1
-$         goto mod_sym_loop
-$     endif
-$MAP_LOOP:
-$     read/end=map_end map line
-$     if (f$locate("{",line).lt. f$length(line)) .or. -
-         (f$locate("global:", line) .lt. f$length(line))
-$     then
-$         proc = true
-$         goto map_loop
-$     endif
-$     if f$locate("}",line).lt. f$length(line) then proc = false
-$     if f$locate("local:", line) .lt. f$length(line) then proc = false
-$     if proc
-$     then
-$         shared_proc = f$edit(line,"collapse")
-$         chop_semi = f$locate(";", shared_proc)
-$         if chop_semi .lt. f$length(shared_proc) then -
-              shared_proc = f$extract(0, chop_semi, shared_proc)
-$         write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
-        			 f$edit(shared_proc,"upcase"),shared_proc)
-$         write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$     endif
-$     goto map_loop
-$MAP_END:
-$     close/nolog aopt
-$     close/nolog bopt
-$     open/append libopt 'p2'
-$     open/read aopt a.opt
-$     open/read bopt b.opt
-$ALOOP:
-$     read/end=aloop_end aopt line
-$     write libopt line
-$     goto aloop
-$ALOOP_END:
-$     close/nolog aopt
-$     sv = ""
-$BLOOP:
-$     read/end=bloop_end bopt svn
-$     if (svn.nes."")
-$     then
-$        if (sv.nes."") then write libopt sv
-$        sv = svn
-$     endif
-$     goto bloop
-$BLOOP_END:
-$     write libopt f$extract(0,f$length(sv)-2,sv), "-"
-$     write libopt ")"
-$     close/nolog bopt
-$     delete/nolog/noconf a.opt;*,b.opt;*
-$ else
-$     if vax
-$     then
-$     open/append libopt 'p2'
-$     mod_sym_num = 1
-$ VMOD_SYM_LOOP:
-$     if f$type(module'mod_sym_num') .nes. ""
-$     then
-$         mod_in = 0
-$ VMOD_SYM_IN:
-$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$         if shared_proc .nes. "#"
-$         then
-$     	      write libopt f$fao("UNIVERSAL=!AS",-
-      	  			     f$edit(shared_proc,"upcase"))
-$             mod_in = mod_in + 1
-$             goto vmod_sym_in
-$         endif
-$         mod_sym_num = mod_sym_num + 1
-$         goto vmod_sym_loop
-$     endif
-$VMAP_LOOP:
-$     	  read/end=vmap_end map line
-$     	  if (f$locate("{",line).lt. f$length(line)) .or. -
-   	      (f$locate("global:", line) .lt. f$length(line))
-$     	  then
-$     	      proc = true
-$     	      goto vmap_loop
-$     	  endif
-$     	  if f$locate("}",line).lt. f$length(line) then proc = false
-$     	  if f$locate("local:", line) .lt. f$length(line) then proc = false
-$     	  if proc
-$     	  then
-$     	      shared_proc = f$edit(line,"collapse")
-$     	      chop_semi = f$locate(";", shared_proc)
-$     	      if chop_semi .lt. f$length(shared_proc) then -
-      	  	  shared_proc = f$extract(0, chop_semi, shared_proc)
-$     	      write libopt f$fao("UNIVERSAL=!AS",-
-      	  			     f$edit(shared_proc,"upcase"))
-$     	  endif
-$     	  goto vmap_loop
-$VMAP_END:
-$     else
-$         write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
-$         write sys$output "No options file created"
-$     endif
-$ endif
-$ EXIT_M2S:
-$ close/nolog map
-$ close/nolog libopt
-$ endsubroutine

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
deleted file mode 100644
index 3d12a2c..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
+++ /dev/null
@@ -1,115 +0,0 @@
-# Makefile for zlib
-# Borland C++
-# Last updated: 15-Mar-2003
-
-# To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=s
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------ Turbo C++, Borland C++ ------------
-
-#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-#    to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# memory model: one of s, m, c, l (small, medium, compact, large)
-MODEL=l
-
-# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-CC=bcc
-LD=bcc
-AR=tlib
-
-# compiler flags
-# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
-CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
-
-LDFLAGS=-m$(MODEL) -f-
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
-
-
-# targets
-all: $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
-	$(CC) -c $(CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	-del $(ZLIB_LIB)
-	$(AR) $(ZLIB_LIB) $(OBJP1)
-	$(AR) $(ZLIB_LIB) $(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d
-
-clean:
-	-del *.obj
-	-del *.lib
-	-del *.exe
-	-del zlib_*.bak
-	-del foo.gz

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2 b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
deleted file mode 100644
index 29b0395..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
+++ /dev/null
@@ -1,104 +0,0 @@
-# Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-#   make -fmakefile.dj2;  make test -fmakefile.dj2
-#
-# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
-#
-#    make install -fmakefile.dj2
-#
-# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
-# in the sample below if the pattern of the DJGPP distribution is to
-# be followed.  Remember that, while <sp>'es around <=> are ignored in
-# makefiles, they are *not* in batch files or in djgpp.env.
-# - - - - -
-# [make]
-# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
-# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
-# BUTT=-m486
-# - - - - -
-# Alternately, these variables may be defined below, overriding the values
-# in djgpp.env, as
-# INCLUDE_PATH=c:\usr\include
-# LIBRARY_PATH=c:\usr\lib
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lz
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
-       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
-
-OBJA =
-# to use the asm code: make OBJA=match.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-check: test
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
-
-.PHONY : uninstall clean
-
-install: $(INCL) $(LIBS)
-	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
-	$(INSTALL) zlib.h $(INCLUDE_PATH)
-	$(INSTALL) zconf.h $(INCLUDE_PATH)
-	$(INSTALL) libz.a $(LIBRARY_PATH)
-
-uninstall:
-	$(RM) $(INCLUDE_PATH)\zlib.h
-	$(RM) $(INCLUDE_PATH)\zconf.h
-	$(RM) $(LIBRARY_PATH)\libz.a
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) libz.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
deleted file mode 100644
index 9c1b57a..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
+++ /dev/null
@@ -1,69 +0,0 @@
-# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-#   make -fmakefile.emx;  make test -fmakefile.emx
-#
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
-       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) zlib.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
deleted file mode 100644
index ae83786..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
+++ /dev/null
@@ -1,112 +0,0 @@
-# Makefile for zlib
-# Microsoft C 5.1 or later
-# Last updated: 19-Mar-2003
-
-# To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=S
-
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Microsoft C 5.1 and later -------------
-
-#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-#    to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# Memory model: one of S, M, C, L (small, medium, compact, large)
-MODEL=L
-
-CC=cl
-CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
-#-Ox generates bad code with MSC 5.1
-LIB_CFLAGS=-Zl $(CFLAGS)
-
-LD=link
-LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
-# "/farcall/packcode" are only useful for `large code' memory models
-# but should be a "no-op" for small code models.
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-
-
-# targets
-all:  $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	if exist $(ZLIB_LIB) del $(ZLIB_LIB)
-	lib $(ZLIB_LIB) $(OBJ1);
-	lib $(ZLIB_LIB) $(OBJ2);
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d
-
-clean:
-	-del *.obj
-	-del *.lib
-	-del *.exe
-	-del *.map
-	-del zlib_*.bak
-	-del foo.gz

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
deleted file mode 100644
index 5aec82a..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
+++ /dev/null
@@ -1,100 +0,0 @@
-# Makefile for zlib
-# Turbo C 2.01, Turbo C++ 1.01
-# Last updated: 15-Mar-2003
-
-# To use, do "make -fmakefile.tc"
-# To compile in small model, set below: MODEL=s
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------
-MODEL=l
-CC=tcc
-LD=tcc
-AR=tlib
-# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z -m$(MODEL)
-LDFLAGS=-m$(MODEL) -f-
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
-
-
-# targets
-all: $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
-	$(CC) -c $(CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	-del $(ZLIB_LIB)
-	$(AR) $(ZLIB_LIB) $(OBJP1)
-	$(AR) $(ZLIB_LIB) $(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d
-
-clean:
-	-del *.obj
-	-del *.lib
-	-del *.exe
-	-del zlib_*.bak
-	-del foo.gz

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile b/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
deleted file mode 100644
index 21337d0..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
+++ /dev/null
@@ -1,126 +0,0 @@
-#---------------------------------------------------------------------------------
-.SUFFIXES:
-#---------------------------------------------------------------------------------
-
-ifeq ($(strip $(DEVKITARM)),)
-$(error "Please set DEVKITARM in your environment. export DEVKITARM=<path to>devkitARM")
-endif
-
-include $(DEVKITARM)/ds_rules
-
-#---------------------------------------------------------------------------------
-# TARGET is the name of the output
-# BUILD is the directory where object files & intermediate files will be placed
-# SOURCES is a list of directories containing source code
-# DATA is a list of directories containing data files
-# INCLUDES is a list of directories containing header files
-#---------------------------------------------------------------------------------
-TARGET		:=	$(shell basename $(CURDIR))
-BUILD		:=	build
-SOURCES		:=	../../
-DATA		:=	data
-INCLUDES	:=	include
-
-#---------------------------------------------------------------------------------
-# options for code generation
-#---------------------------------------------------------------------------------
-ARCH	:=	-mthumb -mthumb-interwork
-
-CFLAGS	:=	-Wall -O2\
-		-march=armv5te -mtune=arm946e-s \
-		-fomit-frame-pointer -ffast-math \
-		$(ARCH)
-
-CFLAGS	+=	$(INCLUDE) -DARM9
-CXXFLAGS	:= $(CFLAGS) -fno-rtti -fno-exceptions
-
-ASFLAGS	:=	$(ARCH) -march=armv5te -mtune=arm946e-s
-LDFLAGS	=	-specs=ds_arm9.specs -g $(ARCH) -Wl,-Map,$(notdir $*.map)
-
-#---------------------------------------------------------------------------------
-# list of directories containing libraries, this must be the top level containing
-# include and lib
-#---------------------------------------------------------------------------------
-LIBDIRS	:=	$(LIBNDS)
-
-#---------------------------------------------------------------------------------
-# no real need to edit anything past this point unless you need to add additional
-# rules for different file extensions
-#---------------------------------------------------------------------------------
-ifneq ($(BUILD),$(notdir $(CURDIR)))
-#---------------------------------------------------------------------------------
-
-export OUTPUT	:=	$(CURDIR)/lib/libz.a
-
-export VPATH	:=	$(foreach dir,$(SOURCES),$(CURDIR)/$(dir)) \
-			$(foreach dir,$(DATA),$(CURDIR)/$(dir))
-
-export DEPSDIR	:=	$(CURDIR)/$(BUILD)
-
-CFILES		:=	$(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.c)))
-CPPFILES	:=	$(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.cpp)))
-SFILES		:=	$(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.s)))
-BINFILES	:=	$(foreach dir,$(DATA),$(notdir $(wildcard $(dir)/*.*)))
-
-#---------------------------------------------------------------------------------
-# use CXX for linking C++ projects, CC for standard C
-#---------------------------------------------------------------------------------
-ifeq ($(strip $(CPPFILES)),)
-#---------------------------------------------------------------------------------
-	export LD	:=	$(CC)
-#---------------------------------------------------------------------------------
-else
-#---------------------------------------------------------------------------------
-	export LD	:=	$(CXX)
-#---------------------------------------------------------------------------------
-endif
-#---------------------------------------------------------------------------------
-
-export OFILES	:=	$(addsuffix .o,$(BINFILES)) \
-			$(CPPFILES:.cpp=.o) $(CFILES:.c=.o) $(SFILES:.s=.o)
-
-export INCLUDE	:=	$(foreach dir,$(INCLUDES),-I$(CURDIR)/$(dir)) \
-			$(foreach dir,$(LIBDIRS),-I$(dir)/include) \
-			-I$(CURDIR)/$(BUILD)
-
-.PHONY: $(BUILD) clean all
-
-#---------------------------------------------------------------------------------
-all: $(BUILD)
-	@[ -d $@ ] || mkdir -p include
-	@cp ../../*.h include
-
-lib:
-	@[ -d $@ ] || mkdir -p $@
-	
-$(BUILD): lib
-	@[ -d $@ ] || mkdir -p $@
-	@$(MAKE) --no-print-directory -C $(BUILD) -f $(CURDIR)/Makefile
-
-#---------------------------------------------------------------------------------
-clean:
-	@echo clean ...
-	@rm -fr $(BUILD) lib
-
-#---------------------------------------------------------------------------------
-else
-
-DEPENDS	:=	$(OFILES:.o=.d)
-
-#---------------------------------------------------------------------------------
-# main targets
-#---------------------------------------------------------------------------------
-$(OUTPUT)	:	$(OFILES)
-
-#---------------------------------------------------------------------------------
-%.bin.o	:	%.bin
-#---------------------------------------------------------------------------------
-	@echo $(notdir $<)
-	@$(bin2o)
-
-
--include $(DEPENDS)
-
-#---------------------------------------------------------------------------------------
-endif
-#---------------------------------------------------------------------------------------

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README b/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
deleted file mode 100644
index ba7a37d..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
+++ /dev/null
@@ -1,5 +0,0 @@
-This Makefile requires devkitARM (http://www.devkitpro.org/category/devkitarm/) and works inside "contrib/nds". It is based on a devkitARM template.
-
-Eduardo Costa <eduardo.m.costa@gmail.com>
-January 3, 2009
-

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx b/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
deleted file mode 100644
index 4d6ab0e..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
+++ /dev/null
@@ -1,69 +0,0 @@
-# Makefile for zlib.  Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-#   make -fmakefile.emx;  make test -fmakefile.emx
-#
-
-CC=gcc -Zwin32
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
-       gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) zlib.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos b/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
deleted file mode 100644
index 57e29d3..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
+++ /dev/null
@@ -1,151 +0,0 @@
-# Project:   zlib_1_03
-# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
-# test works out-of-the-box, installs `somewhere' on demand
-
-# Toolflags:
-CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah
-C++flags = -c -depend !Depend -IC: -throwback
-Linkflags = -aif -c++ -o $@
-ObjAsmflags = -throwback -NoCache -depend !Depend
-CMHGflags =
-LibFileflags = -c -l -o $@
-Squeezeflags = -o $@
-
-# change the line below to where _you_ want the library installed.
-libdest = lib:zlib
-
-# Final targets:
-@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
-        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
-        @.o.uncompr @.o.zutil
-        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
-        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
-        @.o.trees @.o.uncompr @.o.zutil
-test:   @.minigzip @.example @.lib
-	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
-	@echo running tests: hang on.
-	@/@.minigzip -f -9 libc
-	@/@.minigzip -d libc-gz
-	@/@.minigzip -f -1 libc
-	@/@.minigzip -d libc-gz
-	@/@.minigzip -h -9 libc
-	@/@.minigzip -d libc-gz
-	@/@.minigzip -h -1 libc
-	@/@.minigzip -d libc-gz
-	@/@.minigzip -9 libc
-	@/@.minigzip -d libc-gz
-	@/@.minigzip -1 libc
-	@/@.minigzip -d libc-gz
-	@diff @.lib @.libc
-	@echo that should have reported '@.lib and @.libc identical' if you have diff.
-	@/@.example @.fred @.fred
-	@echo that will have given lots of hello!'s.
-
-@.minigzip:   @.o.minigzip @.lib C:o.Stubs
-        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
-@.example:   @.o.example @.lib C:o.Stubs
-        Link $(Linkflags) @.o.example @.lib C:o.Stubs
-
-install: @.lib
-	cdir $(libdest)
-	cdir $(libdest).h
-	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
-	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
-	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
-	@echo okay, installed zlib in $(libdest)
-
-clean:; remove @.minigzip
-	remove @.example
-	remove @.libc
-	-wipe @.o.* F~r~cV
-	remove @.fred
-
-# User-editable dependencies:
-.c.o:
-        cc $(ccflags) -o $@ $<
-
-# Static dependencies:
-
-# Dynamic dependencies:
-o.example:	c.example
-o.example:	h.zlib
-o.example:	h.zconf
-o.minigzip:	c.minigzip
-o.minigzip:	h.zlib
-o.minigzip:	h.zconf
-o.adler32:	c.adler32
-o.adler32:	h.zlib
-o.adler32:	h.zconf
-o.compress:	c.compress
-o.compress:	h.zlib
-o.compress:	h.zconf
-o.crc32:	c.crc32
-o.crc32:	h.zlib
-o.crc32:	h.zconf
-o.deflate:	c.deflate
-o.deflate:	h.deflate
-o.deflate:	h.zutil
-o.deflate:	h.zlib
-o.deflate:	h.zconf
-o.gzio:	c.gzio
-o.gzio:	h.zutil
-o.gzio:	h.zlib
-o.gzio:	h.zconf
-o.infblock:	c.infblock
-o.infblock:	h.zutil
-o.infblock:	h.zlib
-o.infblock:	h.zconf
-o.infblock:	h.infblock
-o.infblock:	h.inftrees
-o.infblock:	h.infcodes
-o.infblock:	h.infutil
-o.infcodes:	c.infcodes
-o.infcodes:	h.zutil
-o.infcodes:	h.zlib
-o.infcodes:	h.zconf
-o.infcodes:	h.inftrees
-o.infcodes:	h.infblock
-o.infcodes:	h.infcodes
-o.infcodes:	h.infutil
-o.infcodes:	h.inffast
-o.inffast:	c.inffast
-o.inffast:	h.zutil
-o.inffast:	h.zlib
-o.inffast:	h.zconf
-o.inffast:	h.inftrees
-o.inffast:	h.infblock
-o.inffast:	h.infcodes
-o.inffast:	h.infutil
-o.inffast:	h.inffast
-o.inflate:	c.inflate
-o.inflate:	h.zutil
-o.inflate:	h.zlib
-o.inflate:	h.zconf
-o.inflate:	h.infblock
-o.inftrees:	c.inftrees
-o.inftrees:	h.zutil
-o.inftrees:	h.zlib
-o.inftrees:	h.zconf
-o.inftrees:	h.inftrees
-o.inftrees:	h.inffixed
-o.infutil:	c.infutil
-o.infutil:	h.zutil
-o.infutil:	h.zlib
-o.infutil:	h.zconf
-o.infutil:	h.infblock
-o.infutil:	h.inftrees
-o.infutil:	h.infcodes
-o.infutil:	h.infutil
-o.trees:	c.trees
-o.trees:	h.deflate
-o.trees:	h.zutil
-o.trees:	h.zlib
-o.trees:	h.zconf
-o.trees:	h.trees
-o.uncompr:	c.uncompr
-o.uncompr:	h.zlib
-o.uncompr:	h.zconf
-o.zutil:	c.zutil
-o.zutil:	h.zutil
-o.zutil:	h.zlib
-o.zutil:	h.zconf

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/README b/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
deleted file mode 100644
index 800bf07..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
+++ /dev/null
@@ -1,3 +0,0 @@
-This directory contains files that have not been updated for zlib 1.2.x
-
-(Volunteers are encouraged to help clean this up.  Thanks.)

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms b/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
deleted file mode 100644
index 7066da5..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
+++ /dev/null
@@ -1,48 +0,0 @@
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser <m.zinser@gsi.de>
-
-cc_defs =
-c_deb =
-
-.ifdef __DECC__
-pref = /prefix=all
-.endif
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
-       deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
-       inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
-
-CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
-
-all : example.exe minigzip.exe
-        @ write sys$output " Example applications available"
-libz.olb : libz.olb($(OBJS))
-	@ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
-              link example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
-              link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
-
-clean :
-	delete *.obj;*,libz.olb;*
-
-
-# Other dependencies.
-adler32.obj : zutil.h zlib.h zconf.h
-compress.obj : zlib.h zconf.h
-crc32.obj : zutil.h zlib.h zconf.h
-deflate.obj : deflate.h zutil.h zlib.h zconf.h
-example.obj : zlib.h zconf.h
-gzio.obj : zutil.h zlib.h zconf.h
-infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.obj : zutil.h zlib.h zconf.h infblock.h
-inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
-infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.obj : zlib.h zconf.h
-trees.obj : deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : zlib.h zconf.h
-zutil.obj : zutil.h zlib.h zconf.h

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2 b/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
deleted file mode 100644
index a105aaa..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
+++ /dev/null
@@ -1,136 +0,0 @@
-# Makefile for zlib under OS/2 using GCC (PGCC)
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile and test, type:
-#   cp Makefile.os2 ..
-#   cd ..
-#   make -f Makefile.os2 test
-
-# This makefile will build a static library z.lib, a shared library
-# z.dll and a import library zdll.lib. You can use either z.lib or
-# zdll.lib by specifying either -lz or -lzdll on gcc's command line
-
-CC=gcc -Zomf -s
-
-CFLAGS=-O6 -Wall
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-#################### BUG WARNING: #####################
-## infcodes.c hits a bug in pgcc-1.0, so you have to use either
-## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
-## This bug is reportedly fixed in pgcc >1.0, but this was not tested
-CFLAGS+=-fno-force-mem
-
-LDFLAGS=-s -L. -lzdll -Zcrtdll
-LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
-
-VER=1.1.0
-ZLIB=z.lib
-SHAREDLIB=z.dll
-SHAREDLIBIMP=zdll.lib
-LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
-
-AR=emxomfar cr
-IMPLIB=emximp
-RANLIB=echo
-TAR=tar
-SHELL=bash
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
-  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
-  contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
-
-all: example.exe minigzip.exe
-
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-$(ZLIB): $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-$(SHAREDLIB): $(OBJS) os2/z.def
-	$(LDSHARED) -o $@ $^
-
-$(SHAREDLIBIMP): os2/z.def
-	$(IMPLIB) -o $@ $^
-
-example.exe: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip.exe: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
-
-distclean:	clean
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def b/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
deleted file mode 100644
index 4c753f1..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
+++ /dev/null
@@ -1,51 +0,0 @@
-;
-; Slightly modified version of ../nt/zlib.dnt :-)
-;
-
-LIBRARY		Z
-DESCRIPTION	"Zlib compression library for OS/2"
-CODE		PRELOAD MOVEABLE DISCARDABLE
-DATA		PRELOAD MOVEABLE MULTIPLE
-
-EXPORTS
-    adler32
-    compress
-    crc32
-    deflate
-    deflateCopy
-    deflateEnd
-    deflateInit2_
-    deflateInit_
-    deflateParams
-    deflateReset
-    deflateSetDictionary
-    gzclose
-    gzdopen
-    gzerror
-    gzflush
-    gzopen
-    gzread
-    gzwrite
-    inflate
-    inflateEnd
-    inflateInit2_
-    inflateInit_
-    inflateReset
-    inflateSetDictionary
-    inflateSync
-    uncompress
-    zlibVersion
-    gzprintf
-    gzputc
-    gzgetc
-    gzseek
-    gzrewind
-    gztell
-    gzeof
-    gzsetparams
-    zError
-    inflateSyncPoint
-    get_crc_table
-    compress2
-    gzputs
-    gzgets

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt b/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
deleted file mode 100644
index 57efe58..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-See below some functions declarations for Visual Basic.
-
-Frequently Asked Question:
-
-Q: Each time I use the compress function I get the -5 error (not enough
-   room in the output buffer).
-
-A: Make sure that the length of the compressed buffer is passed by
-   reference ("as any"), not by value ("as long"). Also check that
-   before the call of compress this length is equal to the total size of
-   the compressed buffer and not zero.
-
-
-From: "Jon Caruana" <jon-net@usa.net>
-Subject: Re: How to port zlib declares to vb?
-Date: Mon, 28 Oct 1996 18:33:03 -0600
-
-Got the answer! (I haven't had time to check this but it's what I got, and
-looks correct):
-
-He has the following routines working:
-        compress
-        uncompress
-        gzopen
-        gzwrite
-        gzread
-        gzclose
-
-Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
-
-#If Win16 Then   'Use Win16 calls.
-Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
-        String, comprLen As Any, ByVal buf As String, ByVal buflen
-        As Long) As Integer
-Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
-        As String, uncomprLen As Any, ByVal compr As String, ByVal
-        lcompr As Long) As Integer
-Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
-        String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
-        Long) As Integer
-#Else
-Declare Function compress Lib "ZLIB32.DLL"
-        (ByVal compr As String, comprLen As Any, ByVal buf As
-        String, ByVal buflen As Long) As Integer
-Declare Function uncompress Lib "ZLIB32.DLL"
-        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
-        String, ByVal lcompr As Long) As Long
-Declare Function gzopen Lib "ZLIB32.DLL"
-        (ByVal file As String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzwrite Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzclose Lib "ZLIB32.DLL"
-        (ByVal file As Long) As Long
-#End If
-
--Jon Caruana
-jon-net@usa.net
-Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
-
-
-Here is another example from Michael <michael_borgsys@hotmail.com> that he
-says conforms to the VB guidelines, and that solves the problem of not
-knowing the uncompressed size by storing it at the end of the file:
-
-'Calling the functions:
-'bracket meaning: <parameter> [optional] {Range of possible values}
-'Call subCompressFile(<path with filename to compress> [, <path with
-filename to write to>, [level of compression {1..9}]])
-'Call subUncompressFile(<path with filename to compress>)
-
-Option Explicit
-Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
-Private Const SUCCESS As Long = 0
-Private Const strFilExt As String = ".cpr"
-Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
-ByVal level As Integer) As Long
-Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
-As Long
-
-Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
-strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
-    Dim strCprPth As String
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim bytaryOri() As Byte
-    Dim bytaryCpr() As Byte
-    lngOriSiz = FileLen(strargOriFilPth)
-    ReDim bytaryOri(lngOriSiz - 1)
-    Open strargOriFilPth For Binary Access Read As #1
-        Get #1, , bytaryOri()
-    Close #1
-    strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
-'Select file path and name
-    strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
-strFilExt, "", strFilExt) 'Add file extension if not exists
-    lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
-more space then original file size
-    ReDim bytaryCpr(lngCprSiz - 1)
-    If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
-SUCCESS Then
-        lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
-        ReDim Preserve bytaryCpr(lngCprSiz - 1)
-        Open strCprPth For Binary Access Write As #1
-            Put #1, , bytaryCpr()
-            Put #1, , lngOriSiz 'Add the the original size value to the end
-(last 4 bytes)
-        Close #1
-    Else
-        MsgBox "Compression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-
-Public Sub subUncompressFile(ByVal strargFilPth As String)
-    Dim bytaryCpr() As Byte
-    Dim bytaryOri() As Byte
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim strOriPth As String
-    lngCprSiz = FileLen(strargFilPth)
-    ReDim bytaryCpr(lngCprSiz - 1)
-    Open strargFilPth For Binary Access Read As #1
-        Get #1, , bytaryCpr()
-    Close #1
-    'Read the original file size value:
-    lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
-              + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
-              + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
-              + bytaryCpr(lngCprSiz - 4)
-    ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
-    ReDim bytaryOri(lngOriSiz - 1)
-    If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
-Then
-        strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
-        Open strOriPth For Binary Access Write As #1
-            Put #1, , bytaryOri()
-        Close #1
-    Else
-        MsgBox "Uncompression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-Public Property Get lngPercentSmaller() As Long
-    lngPercentSmaller = lngpvtPcnSml
-End Property

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg b/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
deleted file mode 100644
index aebf6e3..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
+++ /dev/null
@@ -1,141 +0,0 @@
-<QPG:Generation>
-   <QPG:Options>
-      <QPG:User unattended="no" verbosity="2" listfiles="yes"/>
-      <QPG:Defaults type="qnx_package"/>
-      <QPG:Source></QPG:Source>
-      <QPG:Release number="+"/>
-      <QPG:Build></QPG:Build>
-      <QPG:FileSorting strip="yes"/>
-      <QPG:Package targets="combine"/>
-      <QPG:Repository generate="yes"/>
-      <QPG:FinalDir></QPG:FinalDir>
-      <QPG:Cleanup></QPG:Cleanup>
-   </QPG:Options>
-
-   <QPG:Responsible>
-      <QPG:Company></QPG:Company>
-      <QPG:Department></QPG:Department>
-      <QPG:Group></QPG:Group>
-      <QPG:Team></QPG:Team>
-      <QPG:Employee></QPG:Employee>
-      <QPG:EmailAddress></QPG:EmailAddress>
-   </QPG:Responsible>
-
-   <QPG:Values>
-      <QPG:Files>
-         <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.8"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.8"/>
-         <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" component="slib"/>
-      </QPG:Files>
-
-      <QPG:PackageFilter>
-         <QPM:PackageManifest>
-            <QPM:PackageDescription>
-               <QPM:PackageType>Library</QPM:PackageType>
-               <QPM:PackageReleaseNotes></QPM:PackageReleaseNotes>
-               <QPM:PackageReleaseUrgency>Medium</QPM:PackageReleaseUrgency>
-               <QPM:PackageRepository></QPM:PackageRepository>
-               <QPM:FileVersion>2.0</QPM:FileVersion>
-            </QPM:PackageDescription>
-
-            <QPM:ProductDescription>
-               <QPM:ProductName>zlib</QPM:ProductName>
-               <QPM:ProductIdentifier>zlib</QPM:ProductIdentifier>
-               <QPM:ProductEmail>alain.bonnefoy@icbt.com</QPM:ProductEmail>
-               <QPM:VendorName>Public</QPM:VendorName>
-               <QPM:VendorInstallName>public</QPM:VendorInstallName>
-               <QPM:VendorURL>www.gzip.org/zlib</QPM:VendorURL>
-               <QPM:VendorEmbedURL></QPM:VendorEmbedURL>
-               <QPM:VendorEmail></QPM:VendorEmail>
-               <QPM:AuthorName>Jean-Loup Gailly,Mark Adler</QPM:AuthorName>
-               <QPM:AuthorURL>www.gzip.org/zlib</QPM:AuthorURL>
-               <QPM:AuthorEmbedURL></QPM:AuthorEmbedURL>
-               <QPM:AuthorEmail>zlib@gzip.org</QPM:AuthorEmail>
-               <QPM:ProductIconSmall></QPM:ProductIconSmall>
-               <QPM:ProductIconLarge></QPM:ProductIconLarge>
-               <QPM:ProductDescriptionShort>A massively spiffy yet delicately unobtrusive compression library.</QPM:ProductDescriptionShort>
-               <QPM:ProductDescriptionLong>zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system.</QPM:ProductDescriptionLong>
-               <QPM:ProductDescriptionURL>http://www.gzip.org/zlib</QPM:ProductDescriptionURL>
-               <QPM:ProductDescriptionEmbedURL></QPM:ProductDescriptionEmbedURL>
-            </QPM:ProductDescription>
-
-            <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.8</QPM:ReleaseVersion>
-               <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
-               <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
-               <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
-               <QPM:ReleaseNoteMajor></QPM:ReleaseNoteMajor>
-               <QPM:ExcludeCountries>
-                  <QPM:Country></QPM:Country>
-               </QPM:ExcludeCountries>
-
-               <QPM:ReleaseCopyright>No License</QPM:ReleaseCopyright>
-            </QPM:ReleaseDescription>
-
-            <QPM:ContentDescription>
-               <QPM:ContentTopic xmlmultiple="true">Software Development/Libraries and Extensions/C Libraries</QPM:ContentTopic>
-               <QPM:ContentKeyword>zlib,compression</QPM:ContentKeyword>
-               <QPM:TargetOS>qnx6</QPM:TargetOS>
-               <QPM:HostOS>qnx6</QPM:HostOS>
-               <QPM:DisplayEnvironment xmlmultiple="true">None</QPM:DisplayEnvironment>
-               <QPM:TargetAudience xmlmultiple="true">Developer</QPM:TargetAudience>
-            </QPM:ContentDescription>
-         </QPM:PackageManifest>
-      </QPG:PackageFilter>
-
-      <QPG:PackageFilter proc="none" target="none">
-         <QPM:PackageManifest>
-            <QPM:ProductInstallationDependencies>
-               <QPM:ProductRequirements></QPM:ProductRequirements>
-            </QPM:ProductInstallationDependencies>
-
-            <QPM:ProductInstallationProcedure>
-               <QPM:Script xmlmultiple="true">
-                  <QPM:ScriptName></QPM:ScriptName>
-                  <QPM:ScriptType>Install</QPM:ScriptType>
-                  <QPM:ScriptTiming>Post</QPM:ScriptTiming>
-                  <QPM:ScriptBlocking>No</QPM:ScriptBlocking>
-                  <QPM:ScriptResult>Ignore</QPM:ScriptResult>
-                  <QPM:ShortDescription></QPM:ShortDescription>
-                  <QPM:UseBinaries>No</QPM:UseBinaries>
-                  <QPM:Priority>Optional</QPM:Priority>
-               </QPM:Script>
-            </QPM:ProductInstallationProcedure>
-         </QPM:PackageManifest>
-
-         <QPM:Launch>
-         </QPM:Launch>
-      </QPG:PackageFilter>
-
-      <QPG:PackageFilter type="core" component="none">
-         <QPM:PackageManifest>
-            <QPM:ProductInstallationProcedure>
-	       <QPM:OrderDependency xmlmultiple="true">
-	          <QPM:Order>InstallOver</QPM:Order>
-	          <QPM:Product>zlib</QPM:Product>
-	       </QPM:OrderDependency>
-            </QPM:ProductInstallationProcedure>
-         </QPM:PackageManifest>
-
-         <QPM:Launch>
-         </QPM:Launch>
-      </QPG:PackageFilter>
-
-      <QPG:PackageFilter type="core" component="dev">
-         <QPM:PackageManifest>
-            <QPM:ProductInstallationProcedure>
-	       <QPM:OrderDependency xmlmultiple="true">
-	          <QPM:Order>InstallOver</QPM:Order>
-	          <QPM:Product>zlib-dev</QPM:Product>
-	       </QPM:OrderDependency>
-            </QPM:ProductInstallationProcedure>
-         </QPM:PackageManifest>
-
-         <QPM:Launch>
-         </QPM:Launch>
-      </QPG:PackageFilter>
-   </QPG:Values>
-</QPG:Generation>


Mime
View raw message