corinthia-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From j...@apache.org
Subject [65/83] [abbrv] incubator-corinthia git commit: removed zlib
Date Mon, 23 Mar 2015 16:19:53 GMT
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.c
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.c b/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.c
deleted file mode 100644
index 6969577..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.c
+++ /dev/null
@@ -1,1967 +0,0 @@
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://tools.ietf.org/html/rfc1951
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* @(#) $Id$ */
-
-#include "deflate.h"
-
-const char deflate_copyright[] =
-   " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-#ifndef FASTEST
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-#endif
-local block_state deflate_rle    OF((deflate_state *s, int flush));
-local block_state deflate_huff   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-#ifdef FASTEST
-local const config configuration_table[2] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
-#else
-local const config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
-#endif
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
-#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-                         Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-                  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int wrap = 1;
-    static const char my_version[] = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-        return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-    if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-#endif
-    }
-    if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zfree = zcfree;
-#endif
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-
-    if (windowBits < 0) { /* suppress zlib wrapper */
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-#ifdef GZIP
-    else if (windowBits > 15) {
-        wrap = 2;       /* write gzip wrapper instead */
-        windowBits -= 16;
-    }
-#endif
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->wrap = wrap;
-    s->gzhead = Z_NULL;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->high_water = 0;      /* nothing written to s->window yet */
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        s->status = FINISH_STATE;
-        strm->msg = ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt str, n;
-    int wrap;
-    unsigned avail;
-    z_const unsigned char *next;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
-        return Z_STREAM_ERROR;
-    s = strm->state;
-    wrap = s->wrap;
-    if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
-        return Z_STREAM_ERROR;
-
-    /* when using zlib wrappers, compute Adler-32 for provided dictionary */
-    if (wrap == 1)
-        strm->adler = adler32(strm->adler, dictionary, dictLength);
-    s->wrap = 0;                    /* avoid computing Adler-32 in read_buf */
-
-    /* if dictionary would fill window, just replace the history */
-    if (dictLength >= s->w_size) {
-        if (wrap == 0) {            /* already empty otherwise */
-            CLEAR_HASH(s);
-            s->strstart = 0;
-            s->block_start = 0L;
-            s->insert = 0;
-        }
-        dictionary += dictLength - s->w_size;  /* use the tail */
-        dictLength = s->w_size;
-    }
-
-    /* insert dictionary into window and hash */
-    avail = strm->avail_in;
-    next = strm->next_in;
-    strm->avail_in = dictLength;
-    strm->next_in = (z_const Bytef *)dictionary;
-    fill_window(s);
-    while (s->lookahead >= MIN_MATCH) {
-        str = s->strstart;
-        n = s->lookahead - (MIN_MATCH-1);
-        do {
-            UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-            s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-            s->head[s->ins_h] = (Pos)str;
-            str++;
-        } while (--n);
-        s->strstart = str;
-        s->lookahead = MIN_MATCH-1;
-        fill_window(s);
-    }
-    s->strstart += s->lookahead;
-    s->block_start = (long)s->strstart;
-    s->insert = s->lookahead;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    strm->next_in = next;
-    strm->avail_in = avail;
-    s->wrap = wrap;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateResetKeep (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
-        return Z_STREAM_ERROR;
-    }
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->wrap < 0) {
-        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
-    }
-    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
-    strm->adler =
-#ifdef GZIP
-        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
-#endif
-        adler32(0L, Z_NULL, 0);
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
-    z_streamp strm;
-{
-    int ret;
-
-    ret = deflateResetKeep(strm);
-    if (ret == Z_OK)
-        lm_init(strm->state);
-    return ret;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetHeader (strm, head)
-    z_streamp strm;
-    gz_headerp head;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
-    strm->state->gzhead = head;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePending (strm, pending, bits)
-    unsigned *pending;
-    int *bits;
-    z_streamp strm;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (pending != Z_NULL)
-        *pending = strm->state->pending;
-    if (bits != Z_NULL)
-        *bits = strm->state->bi_valid;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePrime (strm, bits, value)
-    z_streamp strm;
-    int bits;
-    int value;
-{
-    deflate_state *s;
-    int put;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-    if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
-        return Z_BUF_ERROR;
-    do {
-        put = Buf_size - s->bi_valid;
-        if (put > bits)
-            put = bits;
-        s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
-        s->bi_valid += put;
-        _tr_flush_bits(s);
-        value >>= put;
-        bits -= put;
-    } while (bits);
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        strm->total_in != 0) {
-        /* Flush the last buffer: */
-        err = deflate(strm, Z_BLOCK);
-        if (err == Z_BUF_ERROR && s->pending == 0)
-            err = Z_OK;
-    }
-    if (s->level != level) {
-        s->level = level;
-        s->max_lazy_match   = configuration_table[level].max_lazy;
-        s->good_match       = configuration_table[level].good_length;
-        s->nice_match       = configuration_table[level].nice_length;
-        s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
-    z_streamp strm;
-    int good_length;
-    int max_lazy;
-    int nice_length;
-    int max_chain;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-    s->good_match = good_length;
-    s->max_lazy_match = max_lazy;
-    s->nice_match = nice_length;
-    s->max_chain_length = max_chain;
-    return Z_OK;
-}
-
-/* =========================================================================
- * For the default windowBits of 15 and memLevel of 8, this function returns
- * a close to exact, as well as small, upper bound on the compressed size.
- * They are coded as constants here for a reason--if the #define's are
- * changed, then this function needs to be changed as well.  The return
- * value for 15 and 8 only works for those exact settings.
- *
- * For any setting other than those defaults for windowBits and memLevel,
- * the value returned is a conservative worst case for the maximum expansion
- * resulting from using fixed blocks instead of stored blocks, which deflate
- * can emit on compressed data for some combinations of the parameters.
- *
- * This function could be more sophisticated to provide closer upper bounds for
- * every combination of windowBits and memLevel.  But even the conservative
- * upper bound of about 14% expansion does not seem onerous for output buffer
- * allocation.
- */
-uLong ZEXPORT deflateBound(strm, sourceLen)
-    z_streamp strm;
-    uLong sourceLen;
-{
-    deflate_state *s;
-    uLong complen, wraplen;
-    Bytef *str;
-
-    /* conservative upper bound for compressed data */
-    complen = sourceLen +
-              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
-
-    /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return complen + 6;
-
-    /* compute wrapper length */
-    s = strm->state;
-    switch (s->wrap) {
-    case 0:                                 /* raw deflate */
-        wraplen = 0;
-        break;
-    case 1:                                 /* zlib wrapper */
-        wraplen = 6 + (s->strstart ? 4 : 0);
-        break;
-    case 2:                                 /* gzip wrapper */
-        wraplen = 18;
-        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
-            if (s->gzhead->extra != Z_NULL)
-                wraplen += 2 + s->gzhead->extra_len;
-            str = s->gzhead->name;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            str = s->gzhead->comment;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            if (s->gzhead->hcrc)
-                wraplen += 2;
-        }
-        break;
-    default:                                /* for compiler happiness */
-        wraplen = 6;
-    }
-
-    /* if not default parameters, return conservative bound */
-    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
-        return complen + wraplen;
-
-    /* default settings: return tight bound for that case */
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13 - 6 + wraplen;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    unsigned len;
-    deflate_state *s = strm->state;
-
-    _tr_flush_bits(s);
-    len = s->pending;
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    zmemcpy(strm->next_out, s->pending_out, len);
-    strm->next_out  += len;
-    s->pending_out  += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    s->pending -= len;
-    if (s->pending == 0) {
-        s->pending_out = s->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        flush > Z_BLOCK || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = strm->state;
-
-    if (strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
-        (s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the header */
-    if (s->status == INIT_STATE) {
-#ifdef GZIP
-        if (s->wrap == 2) {
-            strm->adler = crc32(0L, Z_NULL, 0);
-            put_byte(s, 31);
-            put_byte(s, 139);
-            put_byte(s, 8);
-            if (s->gzhead == Z_NULL) {
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, OS_CODE);
-                s->status = BUSY_STATE;
-            }
-            else {
-                put_byte(s, (s->gzhead->text ? 1 : 0) +
-                            (s->gzhead->hcrc ? 2 : 0) +
-                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                            (s->gzhead->name == Z_NULL ? 0 : 8) +
-                            (s->gzhead->comment == Z_NULL ? 0 : 16)
-                        );
-                put_byte(s, (Byte)(s->gzhead->time & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, s->gzhead->os & 0xff);
-                if (s->gzhead->extra != Z_NULL) {
-                    put_byte(s, s->gzhead->extra_len & 0xff);
-                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-                }
-                if (s->gzhead->hcrc)
-                    strm->adler = crc32(strm->adler, s->pending_buf,
-                                        s->pending);
-                s->gzindex = 0;
-                s->status = EXTRA_STATE;
-            }
-        }
-        else
-#endif
-        {
-            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-            uInt level_flags;
-
-            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-                level_flags = 0;
-            else if (s->level < 6)
-                level_flags = 1;
-            else if (s->level == 6)
-                level_flags = 2;
-            else
-                level_flags = 3;
-            header |= (level_flags << 6);
-            if (s->strstart != 0) header |= PRESET_DICT;
-            header += 31 - (header % 31);
-
-            s->status = BUSY_STATE;
-            putShortMSB(s, header);
-
-            /* Save the adler32 of the preset dictionary: */
-            if (s->strstart != 0) {
-                putShortMSB(s, (uInt)(strm->adler >> 16));
-                putShortMSB(s, (uInt)(strm->adler & 0xffff));
-            }
-            strm->adler = adler32(0L, Z_NULL, 0);
-        }
-    }
-#ifdef GZIP
-    if (s->status == EXTRA_STATE) {
-        if (s->gzhead->extra != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-
-            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size)
-                        break;
-                }
-                put_byte(s, s->gzhead->extra[s->gzindex]);
-                s->gzindex++;
-            }
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (s->gzindex == s->gzhead->extra_len) {
-                s->gzindex = 0;
-                s->status = NAME_STATE;
-            }
-        }
-        else
-            s->status = NAME_STATE;
-    }
-    if (s->status == NAME_STATE) {
-        if (s->gzhead->name != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->name[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0) {
-                s->gzindex = 0;
-                s->status = COMMENT_STATE;
-            }
-        }
-        else
-            s->status = COMMENT_STATE;
-    }
-    if (s->status == COMMENT_STATE) {
-        if (s->gzhead->comment != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->comment[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0)
-                s->status = HCRC_STATE;
-        }
-        else
-            s->status = HCRC_STATE;
-    }
-    if (s->status == HCRC_STATE) {
-        if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size)
-                flush_pending(strm);
-            if (s->pending + 2 <= s->pending_buf_size) {
-                put_byte(s, (Byte)(strm->adler & 0xff));
-                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-                strm->adler = crc32(0L, Z_NULL, 0);
-                s->status = BUSY_STATE;
-            }
-        }
-        else
-            s->status = BUSY_STATE;
-    }
-#endif
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
-            s->last_flush = -1;
-            return Z_OK;
-        }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                        (*(configuration_table[s->level].func))(s, flush));
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-            if (strm->avail_out == 0) {
-                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-            }
-            return Z_OK;
-            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-             * of deflate should use the same flush parameter to make sure
-             * that the flush is complete. So we don't have to output an
-             * empty block here, this will be done at next call. This also
-             * ensures that for a very small output buffer, we emit at most
-             * one empty block.
-             */
-        }
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                    if (s->lookahead == 0) {
-                        s->strstart = 0;
-                        s->block_start = 0L;
-                        s->insert = 0;
-                    }
-                }
-            }
-            flush_pending(strm);
-            if (strm->avail_out == 0) {
-              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-              return Z_OK;
-            }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->wrap <= 0) return Z_STREAM_END;
-
-    /* Write the trailer */
-#ifdef GZIP
-    if (s->wrap == 2) {
-        put_byte(s, (Byte)(strm->adler & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
-        put_byte(s, (Byte)(strm->total_in & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
-    }
-    else
-#endif
-    {
-        putShortMSB(s, (uInt)(strm->adler >> 16));
-        putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    }
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
-    status = strm->state->status;
-    if (status != INIT_STATE &&
-        status != EXTRA_STATE &&
-        status != NAME_STATE &&
-        status != COMMENT_STATE &&
-        status != HCRC_STATE &&
-        status != BUSY_STATE &&
-        status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, strm->state->pending_buf);
-    TRY_FREE(strm, strm->state->head);
-    TRY_FREE(strm, strm->state->prev);
-    TRY_FREE(strm, strm->state->window);
-
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-#ifdef MAXSEG_64K
-    return Z_STREAM_ERROR;
-#else
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
-        return Z_STREAM_ERROR;
-    }
-
-    ss = source->state;
-
-    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* following zmemcpy do not work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-#endif /* MAXSEG_64K */
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    Bytef *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    zmemcpy(buf, strm->next_in, len);
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, buf, len);
-    }
-#ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, buf, len);
-    }
-#endif
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->insert = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifndef FASTEST
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-#endif
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2.  Note that the checks below
-         * for insufficient lookahead only occur occasionally for performance
-         * reasons.  Therefore uninitialized memory will be accessed, and
-         * conditional jumps will be made that depend on those values.
-         * However the length of the match is limited to the lookahead, so
-         * the output of deflate is not affected by the uninitialized values.
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#else /* FASTEST */
-
-/* ---------------------------------------------------------------------------
- * Optimized version for FASTEST only
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    Assert(cur_match < s->strstart, "no future");
-
-    match = s->window + cur_match;
-
-    /* Return failure if the match length is less than 2:
-     */
-    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
-    /* The check at best_len-1 can be removed because it will be made
-     * again later. (This heuristic is not always a win.)
-     * It is not necessary to compare scan[2] and match[2] since they
-     * are always equal when the other bytes match, given that
-     * the hash keys are equal and that HASH_BITS >= 8.
-     */
-    scan += 2, match += 2;
-    Assert(*scan == *match, "match[2]?");
-
-    /* We check for insufficient lookahead only every 8th comparison;
-     * the 256th check will be made at strstart+258.
-     */
-    do {
-    } while (*++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             scan < strend);
-
-    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-    len = MAX_MATCH - (int)(strend - scan);
-
-    if (len < MIN_MATCH) return MIN_MATCH - 1;
-
-    s->match_start = cur_match;
-    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
-}
-
-#endif /* FASTEST */
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp(s->window + match,
-                s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-                start, match, length);
-        do {
-            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-        } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif /* DEBUG */
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (sizeof(int) <= 2) {
-            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-                more = wsize;
-
-            } else if (more == (unsigned)(-1)) {
-                /* Very unlikely, but possible on 16 bit machine if
-                 * strstart == 0 && lookahead == 1 (input done a byte at time)
-                 */
-                more--;
-            }
-        }
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-#ifndef FASTEST
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-#endif
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) break;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead + s->insert >= MIN_MATCH) {
-            uInt str = s->strstart - s->insert;
-            s->ins_h = s->window[str];
-            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-            while (s->insert) {
-                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
-#ifndef FASTEST
-                s->prev[str & s->w_mask] = s->head[s->ins_h];
-#endif
-                s->head[s->ins_h] = (Pos)str;
-                str++;
-                s->insert--;
-                if (s->lookahead + s->insert < MIN_MATCH)
-                    break;
-            }
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-
-    /* If the WIN_INIT bytes after the end of the current data have never been
-     * written, then zero those bytes in order to avoid memory check reports of
-     * the use of uninitialized (or uninitialised as Julian writes) bytes by
-     * the longest match routines.  Update the high water mark for the next
-     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
-     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
-     */
-    if (s->high_water < s->window_size) {
-        ulg curr = s->strstart + (ulg)(s->lookahead);
-        ulg init;
-
-        if (s->high_water < curr) {
-            /* Previous high water mark below current data -- zero WIN_INIT
-             * bytes or up to end of window, whichever is less.
-             */
-            init = s->window_size - curr;
-            if (init > WIN_INIT)
-                init = WIN_INIT;
-            zmemzero(s->window + curr, (unsigned)init);
-            s->high_water = curr + init;
-        }
-        else if (s->high_water < (ulg)curr + WIN_INIT) {
-            /* High water mark at or above current data, but below current data
-             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
-             * to end of window, whichever is less.
-             */
-            init = (ulg)curr + WIN_INIT - s->high_water;
-            if (init > s->window_size - s->high_water)
-                init = s->window_size - s->high_water;
-            zmemzero(s->window + s->high_water, (unsigned)init);
-            s->high_water += init;
-        }
-    }
-
-    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
-           "not enough room for search");
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, last) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-                (ulg)((long)s->strstart - s->block_start), \
-                (last)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, last) { \
-   FLUSH_BLOCK_ONLY(s, last); \
-   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
-     */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-                   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-        Assert(s->block_start >= 0L, "block gone");
-
-        s->strstart += s->lookahead;
-        s->lookahead = 0;
-
-        /* Emit a stored block if pending_buf will be full: */
-        max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-            /* strstart == 0 is possible when wraparound on 16-bit machine */
-            s->lookahead = (uInt)(s->strstart - max_start);
-            s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
-        }
-        /* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
-         */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-        }
-    }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if ((long)s->strstart > s->block_start)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;       /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            _tr_tally_dist(s, s->strstart - s->match_start,
-                           s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-#ifndef FASTEST
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++;
-            } else
-#endif
-            {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;          /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
-#if TOO_FAR <= 32767
-                || (s->match_length == MIN_MATCH &&
-                    s->strstart - s->match_start > TOO_FAR)
-#endif
-                )) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                           s->prev_length - MIN_MATCH, bflush);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-            if (bflush) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-        s->match_available = 0;
-    }
-    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-#endif /* FASTEST */
-
-/* ===========================================================================
- * For Z_RLE, simply look for runs of bytes, generate matches only of distance
- * one.  Do not maintain a hash table.  (It will be regenerated if this run of
- * deflate switches away from Z_RLE.)
- */
-local block_state deflate_rle(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-    uInt prev;              /* byte at distance one to match */
-    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the longest run, plus one for the unrolled loop.
-         */
-        if (s->lookahead <= MAX_MATCH) {
-            fill_window(s);
-            if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* See how many times the previous byte repeats */
-        s->match_length = 0;
-        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
-            scan = s->window + s->strstart - 1;
-            prev = *scan;
-            if (prev == *++scan && prev == *++scan && prev == *++scan) {
-                strend = s->window + s->strstart + MAX_MATCH;
-                do {
-                } while (prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         scan < strend);
-                s->match_length = MAX_MATCH - (int)(strend - scan);
-                if (s->match_length > s->lookahead)
-                    s->match_length = s->lookahead;
-            }
-            Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
-        }
-
-        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->strstart - 1, s->match_length);
-
-            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-            s->strstart += s->match_length;
-            s->match_length = 0;
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}
-
-/* ===========================================================================
- * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
- * (It will be regenerated if this run of deflate switches away from Huffman.)
- */
-local block_state deflate_huff(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we have a literal to write. */
-        if (s->lookahead == 0) {
-            fill_window(s);
-            if (s->lookahead == 0) {
-                if (flush == Z_NO_FLUSH)
-                    return need_more;
-                break;      /* flush the current block */
-            }
-        }
-
-        /* Output a literal byte */
-        s->match_length = 0;
-        Tracevv((stderr,"%c", s->window[s->strstart]));
-        _tr_tally_lit (s, s->window[s->strstart], bflush);
-        s->lookahead--;
-        s->strstart++;
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
-        return finish_done;
-    }
-    if (s->last_lit)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
-}

http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.h
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.h b/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.h
deleted file mode 100644
index ce0299e..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/deflate.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2012 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef DEFLATE_H
-#define DEFLATE_H
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip encoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define Buf_size 16
-/* size of bit buffer in bi_buf */
-
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
-    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
-    Byte  method;        /* can only be DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to suppress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    uInt matches;       /* number of string matches in current block */
-    uInt insert;        /* bytes at end of window left to insert */
-
-#ifdef DEBUG
-    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
-    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    ulg high_water;
-    /* High water mark offset in window for initialized bytes -- bytes above
-     * this are set to zero in order to avoid memory check warnings when
-     * longest match routines access bytes past the input.  This is then
-     * updated to the new high water mark.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-#define WIN_INIT MAX_MATCH
-/* Number of bytes after end of data in window to initialize in order to avoid
-   memory checker errors from longest match routines */
-
-        /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-
-#define d_code(dist) \
-   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch ZLIB_INTERNAL _length_code[];
-  extern uch ZLIB_INTERNAL _dist_code[];
-#else
-  extern const uch ZLIB_INTERNAL _length_code[];
-  extern const uch ZLIB_INTERNAL _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
-  { uch cc = (c); \
-    s->d_buf[s->last_lit] = 0; \
-    s->l_buf[s->last_lit++] = cc; \
-    s->dyn_ltree[cc].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-   }
-# define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (length); \
-    ush dist = (distance); \
-    s->d_buf[s->last_lit] = dist; \
-    s->l_buf[s->last_lit++] = len; \
-    dist--; \
-    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
-    s->dyn_dtree[d_code(dist)].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-  }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* DEFLATE_H */


Mime
View raw message