Repository: commonsmath
Updated Branches:
refs/heads/MATH_3_X 93cf7f1cb > 860434148
Improved BSPtree documentation.
Project: http://gitwipus.apache.org/repos/asf/commonsmath/repo
Commit: http://gitwipus.apache.org/repos/asf/commonsmath/commit/86043414
Tree: http://gitwipus.apache.org/repos/asf/commonsmath/tree/86043414
Diff: http://gitwipus.apache.org/repos/asf/commonsmath/diff/86043414
Branch: refs/heads/MATH_3_X
Commit: 8604341486908e88c58a92d33ef8e40b43e88419
Parents: 93cf7f1
Author: Luc Maisonobe <luc@apache.org>
Authored: Fri Aug 14 20:06:17 2015 +0200
Committer: Luc Maisonobe <luc@apache.org>
Committed: Fri Aug 14 20:34:41 2015 +0200

src/site/xdoc/userguide/geometry.xml  102 +++++++++++++++++++++++++++
src/site/xdoc/userguide/index.xml  1 +
2 files changed, 94 insertions(+), 9 deletions()

http://gitwipus.apache.org/repos/asf/commonsmath/blob/86043414/src/site/xdoc/userguide/geometry.xml

diff git a/src/site/xdoc/userguide/geometry.xml b/src/site/xdoc/userguide/geometry.xml
index c05620e..213d74e 100644
 a/src/site/xdoc/userguide/geometry.xml
+++ b/src/site/xdoc/userguide/geometry.xml
@@ 51,7 +51,7 @@
</p>
<p>
All these regions share common features. Regions can be defined from several nonconnected
parts.
 As an example, one PolygonsSet instance in Euclidean 2D (i.e. one the plane) can
represent a region composed
+ As an example, one PolygonsSet instance in Euclidean 2D (i.e. the plane) can represent
a region composed
of several separated polygons separate from each other. They also support regions
containing holes. As an example
a SphericalPolygonsSet on the 2Sphere can represent a land mass on the Earth with
an interior sea, where points
on this sea would not be considered to belong to the land mass. Of course more
complex models can also be represented
@@ 59,11 +59,12 @@
separate islands, some of which having lakes, which may have smaller island ...
In the infinite Euclidean spaces,
regions can have infinite parts. for example in 1D (i.e. along a line), one can
define an interval starting at
abscissa 3 and extending up to infinity. This is also possible in 2D and 3D. For
all spaces, regions without any
 boundaries are also possible so one can define the whole space or the empty region.
The classical set operations
 are available in all cases: union, intersection, symmetric difference (exclusive
or), difference, complement.
 There are also region predicates (point inside/outside/on boundary, emptiness,
other region contained). For some
 regions, they can be constructed directly from a boundary representation (for example
vertices in the case of 2D
 polygons, both on the Euclidean space or on the 2Sphere). Some geometric properties
like size, or boundary size
+ boundaries are also possible so one can define the whole space or the empty region.
+ </p>
+ <p>
+ The classical set operations are available in all cases: union, intersection, symmetric
difference (exclusive or),
+ difference, complement. There are also region predicates (point inside/outside/on
boundary, emptiness,
+ other region contained). Some geometric properties like size, or boundary size
can be computed, as well as barycenters on the Euclidean space. Another important
feature available for all these
regions is the projection of a point to the closest region boundary (if there is
a boundary). The projection provides
both the projected point and the signed distance between the point and its projection,
with the convention distance
@@ 80,7 +81,7 @@
Vector2D</a> and <a href="../apidocs/org/apache/commons/math3/geometry/euclidean/threed/Vector3D.html">
Vector3D</a> provide simple vector types. One important feature is
that instances of these classes are guaranteed
 to be immutable, this greatly simplifies modelling dynamical systems
+ to be immutable, this greatly simplifies modeling dynamical systems
with changing states: once a vector has been computed, a reference to it
is known to preserve its state as long as the reference itself is preserved.
</p>
@@ 119,7 +120,7 @@
can build a rotation from any of these representations, and any of
these representations can be retrieved from a <code>Rotation</code>
instance (see the various constructors and getters). In addition, a
 rotation can also be built implicitely from a set of vectors and their
+ rotation can also be built implicitly from a set of vectors and their
image.
</p>
<p>
@@ 184,7 +185,7 @@
on the 1sphere (i.e. the one dimensional circle corresponding to the boundary
of
a twodimensional disc) and the 2sphere (i.e. the two dimensional sphere surface
corresponding to the boundary of a threedimensional ball). The main classes in
 this package corresopnd to the region explained above, i.e.
+ this package correspond to the region explained above, i.e.
<a href="../apidocs/org/apache/commons/math3/geometry/spherical/oned/ArcsSet.html">ArcsSet</a>
and <a href="../apidocs/org/apache/commons/math3/geometry/spherical/twod/SphericalPolygonsSet.html">SphericalPolygonsSet</a>.
</p>
@@ 232,6 +233,89 @@
internal nodes may become leaf nodes and some leaf nodes may become
internal nodes.
</p>
+ </subsection>
+ <subsection name="11.5 Regions">
+ <p>
+ The regions in all Euclidean and spherical spaces are based on BSPtree using a
<code>Boolean</code>
+ attribute in the leaf cells representing the inside status of the corresponding
cell
+ (true for inside cells, false for outside cells). They all need a <code>tolerance</code>
setting that
+ is either provided at construction when the region is built from scratch or inherited
from the input
+ regions when a region is build by set operations applied to other regions. This
setting is used when
+ the region itself will be used later in another set operation or when points are
tested against the
+ region to compute inside/outside/on boundary status. This tolerance is the <em>thickness</em>
+ of the hyperplane. Points closer than this value to a boundary hyperplane will
be considered
+ <em>on boundary</em>. There are no default values anymore for this
setting (there was one when
+ BSPtree support was introduced, but it created more problems than it solved, so
it has been intentionally
+ removed). Setting this tolerance really depends on the expected values for the
various coordinates. If for
+ example the region is used to model a geological structure with a scale of a few
thousand meters, the expected
+ coordinates order of magnitude will be about 10<sup>3</sup> and the
tolerance could be set to 10<sup>7</sup>
+ (i.e. 0.1 micrometer) or above. If very thin triangles or nearly parallel lines
occur, it may be safer to use
+ a larger value like 10<sup>3</sup> for example. Of course if the BSPtree
is used to model a crystal at
+ atomic level with coordinates of the order of magnitude about 10<sup>9</sup>
the tolerance should be
+ drastically reduced (perhaps down to 10<sup>20</sup> or so).
+ </p>
+ <p>
+ The recommended way to build regions is to start from basic shapes built from their
boundary representation
+ and to use the set operations to combine these basic shapes into more complex shapes.
The basic shapes
+ that can be constructed from boundary representations must have a closed boundary
and be in one part
+ without holes. Regions in several nonconnected parts or with holes must be built
by building the parts
+ beforehand and combining them. All regions (<code>IntervalsSet</code>,
<code>PolygonsSet</code>,
+ <code>PolyhedronsSet</code>, <code>ArcsSet</code>, <code>SphericalPolygonsSet</code>)
provide a dedicated
+ constructor using only the mandatory tolerance distance without any other parameters
that always create
+ the region covering the full space. The empty region case, can be built by building
first the full space
+ region and applying the <code>RegionFactory.getComplement()</code>
method to it to get the corresponding
+ empty region, it can also be built directly for a onecell BSPtree as explained
below.
+ </p>
+ <p>
+ Another way to build regions is to create directly the underlying BSPtree. All
regions (<code>IntervalsSet</code>,
+ <code>PolygonsSet</code>, <code>PolyhedronsSet</code>,
<code>ArcsSet</code>, <code>SphericalPolygonsSet</code>)
+ provide a dedicated constructor that accepts a BSPtree and a tolerance. This way
to build regions should be
+ reserved to dimple cases like the full space, the empty space of regions with only
one or two cut hyperplances.
+ It is not recommended in the general case and is considered expert use. The leaf
nodes of the BSPtree
+ <em>must</em> have a <code>Boolean</code> attribute representing
the inside status of the corresponding cell
+ (true for inside cells, false for outside cells). In order to avoid building too
many small objects, it is
+ recommended to use the predefined constants <code>Boolean.TRUE</code>
and <code>Boolean.FALSE</code>. Using
+ this method, one way to build directly an empty region without complementing the
full region is as follows
+ (note the tolerance parameter which must be present even for the empty region):
+ </p>
+ <source>
+PolygonsSet empty = new PolygonsSet(new BSPTree<Euclidean2D>(false), tolerance);
+ </source>
+ <p>
+ In the Euclidean 3D case, the <a href="../apidocs/org/apache/commons/math3/geometry/euclidean/threed/PolyhedronsSet.html">PolyhedronsSet</a>
+ class has another specific constructor to build regions from vertices and facets.
The signature of this
+ constructor is:
+ </p>
+ <source>
+PolyhedronsSet(List<Vector3D> vertices, List<int[]> facets, double
tolerance);
+ </source>
+ <p>
+ The vertices list contains all the vertices of the polyhedrons, the facets list
defines the facets,
+ as an indirection in the vertices list. Each facet is a short integer array and
each element in a
+ facet array is the index of one vertex in the list. So in our cube example, the
vertices list would
+ contain 8 points corresponding to the cube vertices, the facets list would contain
6 facets (the sides
+ of the cube) and each facet would contain 4 integers corresponding to the indices
of the 4 vertices
+ defining one side. Of course, each vertex would be referenced once in three different
facets.
+ </p>
+ <p>
+ Beware that despite some basic consistency checks are performed in the constructor,
not everything
+ is checked, so it remains under caller responsibility to ensure the vertices and
facets are consistent
+ and properly define a polyhedrons set. One particular trick is that when defining
a facet, the vertices
+ <em>must</em> be provided as walking the polygons boundary in <em>trigonometric</em>
order (i.e.
+ counterclockwise) as seen from the *external* side of the facet. The reason for
this is that the walking
+ order does define the orientation of the inside and outside parts, so walking the
boundary on the wrong
+ order would reverse the facet and the polyhedrons would not be the one you intended
to define. Coming
+ back to our cube example, a logical orientation of the facets would define the
polyhedrons as the finite
+ volume within the cube to be the inside and the infinite space surrounding the
cube as the outside, but
+ reversing all facets would also define a perfectly well behaved polyhedrons which
would have the infinite
+ space surrounding the cube as its inside and the finite volume within the cube
as its outside!
+ </p>
+ <p>
+ If one wants to further look at how it works, there is a test parser for PLY file
formats in the unit tests
+ section of the library and some basic ply files for a simple geometric shape (the
N pentomino) in the test
+ resources. This parser uses the constructor defined above as the PLY file format
uses vertices and facets
+ to represent 3D shapes.
+ </p>
</subsection>
</section>
</body>
http://gitwipus.apache.org/repos/asf/commonsmath/blob/86043414/src/site/xdoc/userguide/index.xml

diff git a/src/site/xdoc/userguide/index.xml b/src/site/xdoc/userguide/index.xml
index 0dfd8e6..81bdd22 100644
 a/src/site/xdoc/userguide/index.xml
+++ b/src/site/xdoc/userguide/index.xml
@@ 119,6 +119,7 @@
<li><a href="geometry.html#a11.2_Euclidean_spaces">11.2 Euclidean
spaces</a></li>
<li><a href="geometry.html#a11.3_nSphere">11.3 nSphere</a></li>
<li><a href="geometry.html#a11.4_Binary_Space_Partitioning">11.4
Binary Space Partitioning</a></li>
+ <li><a href="geometry.html#a11.5_Regions">11.5 Regions</a></li>
</ul></li>
<li><a href="optimization.html">12. Optimization</a>
<ul>
