cocoon-docs mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From d...@cocoon.apache.org
Subject [Cocoon Wiki] Updated: JBossDeployment
Date Sat, 05 Mar 2005 16:42:16 GMT
   Date: 2005-03-05T08:42:16
   Editor: BertrandDelacretaz
   Wiki: Cocoon Wiki
   Page: JBossDeployment
   URL: http://wiki.apache.org/cocoon/JBossDeployment

   point to NoServletContainerRequired

Change Log:

------------------------------------------------------------------------------
@@ -1,3 +1,5 @@
+'''Warning''': many pages on this wiki imply that a servlet container must be installed before
running Cocoon, this is '''wrong''' - see NoServletContainerRequired. A basic installation
of Cocoon for test or development purposes can be ''very simple''.
+
 == How to deploy Cocoon on JBoss and Tomcat ==
 
 1. Deploy tomcat/jboss. Versions 4.0/2.4.3 are apparently known
@@ -27,34 +29,34 @@
 [[BR]]
 [[BR]]
 4. new run.bat file in [your path]/JBoss-2.4.3_Tomcat-4.0/jboss/bin to:
-{{{
-   @echo off
-   @if not "%ECHO%" == "" echo %ECHO%
-   @if "%OS%" == "Windows_NT" setlocal
-
-   set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;run.jar
-
-   REM Add all login modules for JAAS-based security
-   REM and all libraries that are used by them here
-
-   REM need one of the two following lines for xerces support
-   set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;../lib/xerces.jar
-   REM set JBOSS_CLASSPATH=$JBOSS_CLASSPATH:../lib/xml-apis.jar
-
-   REM Add the XML parser jars and set the JAXP factory names
-   REM Crimson parser JAXP setup(default)
-   REM set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;../lib/crimson.jar
-   REM set JAXP=-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.crimson.jaxp.DocumentBuilderFactoryImpl
-   REM set JAXP=%JAXP% -Djavax.xml.parsers.SAXParserFactory=org.apache.crimson.jaxp.SAXParserFactoryImpl
-   echo JBOSS_CLASSPATH=%JBOSS_CLASSPATH%
-   java %JAXP% -classpath "%JBOSS_CLASSPATH%" org.jboss.Main %1 %2 %3 %4 %5 %6 %7 %8 %9
-
-   pause
+{{{
+   @echo off
+   @if not "%ECHO%" == "" echo %ECHO%
+   @if "%OS%" == "Windows_NT" setlocal
+
+   set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;run.jar
+
+   REM Add all login modules for JAAS-based security
+   REM and all libraries that are used by them here
+
+   REM need one of the two following lines for xerces support
+   set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;../lib/xerces.jar
+   REM set JBOSS_CLASSPATH=$JBOSS_CLASSPATH:../lib/xml-apis.jar
+
+   REM Add the XML parser jars and set the JAXP factory names
+   REM Crimson parser JAXP setup(default)
+   REM set JBOSS_CLASSPATH=%JBOSS_CLASSPATH%;../lib/crimson.jar
+   REM set JAXP=-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.crimson.jaxp.DocumentBuilderFactoryImpl
+   REM set JAXP=%JAXP% -Djavax.xml.parsers.SAXParserFactory=org.apache.crimson.jaxp.SAXParserFactoryImpl
+   echo JBOSS_CLASSPATH=%JBOSS_CLASSPATH%
+   java %JAXP% -classpath "%JBOSS_CLASSPATH%" org.jboss.Main %1 %2 %3 %4 %5 %6 %7 %8 %9
+
+   pause
 }}}
 5. If you want to be able to debug JBoss/Tomcat/Cocoon2 replace the last
 line (before pause) with:
-{{{
-   java -Xint -Xdebug -Xnoagent -classpath "%JBOSS_CLASSPATH%" -Xrunjdwp:transport=dt_socket,server=y,address=12999,suspend=n
org.jboss.Main %1 %2 %3 %4 %5 %6 %7 %8 %9
+{{{
+   java -Xint -Xdebug -Xnoagent -classpath "%JBOSS_CLASSPATH%" -Xrunjdwp:transport=dt_socket,server=y,address=12999,suspend=n
org.jboss.Main %1 %2 %3 %4 %5 %6 %7 %8 %9
 }}}
 If you use Netbeans 3.2.1 for programming/debugging remember to add 
 port 12999 to debugging environment.
@@ -87,14 +89,14 @@
 '''JBoss will NOT read the server.xml of Catalina (tomcat4).'''
 
 To change port, edit $JBOSSHOME/conf/Catalina/jboss.jcml and look for the mbean configuration:
-{{{
-   <mbean code="org.jboss.web.catalina.EmbeddedCatalinaServiceSX" name="DefaultDomain:service=EmbeddedTomcat"/>
+{{{
+   <mbean code="org.jboss.web.catalina.EmbeddedCatalinaServiceSX" name="DefaultDomain:service=EmbeddedTomcat"/>
 }}}
 then change it as follows:
-{{{
-   <mbean code="org.jboss.web.catalina.EmbeddedCatalinaServiceSX" name="DefaultDomain:service=EmbeddedTomcat">
-      <attribute name="Port">80</attribute>
-   </mbean>
+{{{
+   <mbean code="org.jboss.web.catalina.EmbeddedCatalinaServiceSX" name="DefaultDomain:service=EmbeddedTomcat">
+      <attribute name="Port">80</attribute>
+   </mbean>
 }}}
 restart JBoss (with Tomcat/Catalina).
 
@@ -102,9 +104,9 @@
 warning: see [http://marc.theaimsgroup.com/?l=xml-cocoon-users&m=103581609814762&w=2]
 
 Using these instructions, you can use CMP beans or connect to Oracle via:
-{{{
-   InitialContext context = new InitialContext();
-   DataSource ds = (DataSource) context.lookup("java:/ctdb");
+{{{
+   InitialContext context = new InitialContext();
+   DataSource ds = (DataSource) context.lookup("java:/ctdb");
 }}}
 1. Copy oracle's classes12.zip (this is available from Oracle technet,and
 has the jdbc driver) to $JBOSS_DIST/lib/ext.
@@ -114,78 +116,78 @@
 
 3. Modify $JBOSS_DIST/conf/tomcat/jboss.jcml: Uncomment the !XidClassName
 attribute shown below:
-{{{
-   <!-- ==================================================================== -->
-   <!-- Transactions -->
-   <!-- ==================================================================== -->
-   <mbean code="org.jboss.tm.TransactionManagerService" name="DefaultDomain:service=TransactionManager">
-      <attribute name="TransactionTimeout">300</attribute>
-
-      <!-- Use this attribute if you need to use a specific Xid implementation -->
-      <attribute name="XidClassName">oracle.jdbc.xa.OracleXid</attribute>
-   </mbean>
+{{{
+   <!-- ==================================================================== -->
+   <!-- Transactions -->
+   <!-- ==================================================================== -->
+   <mbean code="org.jboss.tm.TransactionManagerService" name="DefaultDomain:service=TransactionManager">
+      <attribute name="TransactionTimeout">300</attribute>
+
+      <!-- Use this attribute if you need to use a specific Xid implementation -->
+      <attribute name="XidClassName">oracle.jdbc.xa.OracleXid</attribute>
+   </mbean>
 }}}
 
 4. Also in jboss.jcml: add the Oracle driver to the JDBC drivers (this
 driver is in classes12.zip):
-{{{
-   <!-- ==================================================================== -->
-   <!-- JDBC -->
-   <!-- ==================================================================== -->
-
-   <mbean code="org.jboss.jdbc.JdbcProvider" name="DefaultDomain:service=JdbcProvider">
-      <attribute name="Drivers">org.hsql.jdbcDriver,org.enhydra.instantdb.jdbc.idbDriver,oracle.jdbc.driver.OracleDriver</attribute>
-   </mbean>
+{{{
+   <!-- ==================================================================== -->
+   <!-- JDBC -->
+   <!-- ==================================================================== -->
+
+   <mbean code="org.jboss.jdbc.JdbcProvider" name="DefaultDomain:service=JdbcProvider">
+      <attribute name="Drivers">org.hsql.jdbcDriver,org.enhydra.instantdb.jdbc.idbDriver,oracle.jdbc.driver.OracleDriver</attribute>
+   </mbean>
 }}}
 
 5. Also in jboss.jcml in the JDBC section, define what the oracle datasource name is (say
OracleDB), and the connection URL. In the code below, replace {{{jdbc:oracle:thin:@<host>:<port>:<sid>}}}
with the appropriate string for your installation. Such as {{{jdbc:oracle:thin:@192.168.1.111:1521:testdb}}}
-{{{
-   <mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=datasourcename">
-      <attribute name="PoolName">DefaultDS</attribute>
-      <attribute name="DataSourceClass">org.jboss.pool.jdbc.xa.wrapper.XADataSourceImpl</a
-ttribute>
-      <attribute name="URL">jdbc:oracle:thin:@<host>:<port>:<sid></attribute>
-      <attribute name="JDBCUser">username</attribute>
-      <!-- set correct username here -->
-      <attribute name="Password">password</attribute>     
-     <!-- set correct password here -->
-   </mbean>
+{{{
+   <mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=datasourcename">
+      <attribute name="PoolName">DefaultDS</attribute>
+      <attribute name="DataSourceClass">org.jboss.pool.jdbc.xa.wrapper.XADataSourceImpl</a
+ttribute>
+      <attribute name="URL">jdbc:oracle:thin:@<host>:<port>:<sid></attribute>
+      <attribute name="JDBCUser">username</attribute>
+      <!-- set correct username here -->
+      <attribute name="Password">password</attribute>     
+     <!-- set correct password here -->
+   </mbean>
 }}}
    or alternatively, this may be necessary:
-{{{
-   <mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=datasourcename">
-      <attribute name="PoolName">poolname</attribute>	
-       <!-- as needed -->
-      <attribute name="DataSourceClass">org.jboss.pool.jdbc.xa.wrapper.XADataSourceImpl</attribute>
-      <attribute name="Properties"></attribute>
-      <attribute name="URL">jdbc:oracle:thin:@sjmemctd2:1521:ctdev2</attribute>
-      <attribute name="GCMinIdleTime">1200000</attribute>
-      <attribute name="JDBCUser">username</attribute>	
-      <!-- set correct user name here -->
-      <attribute name="MaxSize">10</attribute>
-      <attribute name="Password">password</attribute      
-      <!-- set correct password here -->
-      <attribute name="GCEnabled">false</attribute>
-      <attribute name="InvalidateOnError">true</attribute>
-      <attribute name="TimestampUsed">false</attribute>
-      <attribute name="Blocking">true</attribute          
-      <!-- may cause exception if set false -->
-      <attribute name="GCInterval">120000</attribute>
-      <attribute name="IdleTimeout">1800000</attribute>
-      <attribute name="IdleTimeoutEnabled">false</attribute>
-      <attribute name="LoggingEnabled">true</attribute>
-      <attribute name="MaxIdleTimeoutPercent">1.0</attribute>
-      <attribute name="MinSize">0</attribute>
-   </mbean>
+{{{
+   <mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=datasourcename">
+      <attribute name="PoolName">poolname</attribute>	
+       <!-- as needed -->
+      <attribute name="DataSourceClass">org.jboss.pool.jdbc.xa.wrapper.XADataSourceImpl</attribute>
+      <attribute name="Properties"></attribute>
+      <attribute name="URL">jdbc:oracle:thin:@sjmemctd2:1521:ctdev2</attribute>
+      <attribute name="GCMinIdleTime">1200000</attribute>
+      <attribute name="JDBCUser">username</attribute>	
+      <!-- set correct user name here -->
+      <attribute name="MaxSize">10</attribute>
+      <attribute name="Password">password</attribute      
+      <!-- set correct password here -->
+      <attribute name="GCEnabled">false</attribute>
+      <attribute name="InvalidateOnError">true</attribute>
+      <attribute name="TimestampUsed">false</attribute>
+      <attribute name="Blocking">true</attribute          
+      <!-- may cause exception if set false -->
+      <attribute name="GCInterval">120000</attribute>
+      <attribute name="IdleTimeout">1800000</attribute>
+      <attribute name="IdleTimeoutEnabled">false</attribute>
+      <attribute name="LoggingEnabled">true</attribute>
+      <attribute name="MaxIdleTimeoutPercent">1.0</attribute>
+      <attribute name="MinSize">0</attribute>
+   </mbean>
 }}}
 
 6. Modify $JBOSS_DIST/conf/tomcat/standardjaws.xml to use the proper datasource via the datasourceelement,
and to use Oracle8 jdbc-sql type mappings. (This is for container managed persistance.)  Make
sure the datasource name matches whatever you defined for the datasource name in step 5.
-{{{
-   <jaws>
-      <datasource>java:/datasourcename</datasource
-         .
-         .
-         .
+{{{
+   <jaws>
+      <datasource>java:/datasourcename</datasource
+         .
+         .
+         .
 }}}
 
 ----

Mime
View raw message