cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Alexandre Bruyere <bruyere.alexan...@gmail.com>
Subject Re: ISOs not readying?
Date Fri, 26 Oct 2018 19:35:00 GMT
NFS was not in fact mounted. How'd I fix that?

(Thanks a lot for the help)

On Fri, Oct 26, 2018 at 3:26 PM Andrija Panic <andrija.panic@gmail.com>
wrote:

> my typo on key name - name of the key (my installation) is
> "/root/.ssh/id_rsa.cloud" (on the agent KVM node) - I swapped dot and
> underscore in previous email, sorry - same key is also avilable on MGMT
> server: /usr/share/cloudstack-common/scripts/vm/systemvm/id_rsa.cloud
>
> Anyway, via Console Access::
> open Console windows of Secondary Storage VM
> root / password (yes... ssh listens only on local interface, so no security
> issue...)
>
> here again execute the script from previous email...
>
> should report all fine - especially check agent connection says connected,
> that it says "NFS is mounted" or similar, and also make sure DNS resolution
> works :) - all from the script.
>
>
> Cheers
>
> On Fri, 26 Oct 2018 at 21:12, Alexandre Bruyere <
> bruyere.alexandre@gmail.com>
> wrote:
>
> > Command doesn't seem to work (says it can't find the ID file). Though if
> > there's a default password for system VMs I could use the console.
> >
> > Adding that template doesn't seem to work.
> >
> > On Fri, Oct 26, 2018 at 2:47 PM Andrija Panic <andrija.panic@gmail.com>
> > wrote:
> >
> > > Just tested URL above, with normal (not direct) download, and it works
> > > fine. (ACS 4.11.2 RC3)
> > >
> > > Did you check the health of the Secondary Storage Virtual Machine - I
> > would
> > > suggest to do so, since this seems as possible issue with SSVM and it
> > might
> > > means other issues for your deployment also.
> > >
> > >
> > >    1.
> > >
> > >    ssh -i  /root/.ssh/id.rsa_cloud  -p 3922 root@<Private Ip address
> of
> > >    SSVM>
> > >    2. *SSVM health check* - Run the following script inside ssvm:
> > >    /usr/local/cloud/systemvm/ssvm-check.sh
> > >    It checks for 1)connectivity with  DNS server 2) resolving of
> domain
> > >    names 3)status of secondary storage 4)ability to write to secondary
> > > storage
> > >    5)connectivity with management server at port 8250 and 6) status of
> > java
> > >    process.
> > >
> > >
> > > Please try to add template:
> > >
> http://dl.openvm.eu/cloudstack/ubuntu/x86_64/ubuntu-16.04-kvm.qcow2.bz2
> > -
> > > if this works...
> > >
> > > Cheers,
> > > Andrija
> > >
> > > On Fri, 26 Oct 2018 at 19:41, Alexandre Bruyere <
> > > bruyere.alexandre@gmail.com>
> > > wrote:
> > >
> > > > Direct download that bypasses secondary storage seems to make it
> ready
> > > > instantly (with the correct filesize), so I'm going to assume the
> link
> > is
> > > > good.
> > > >
> > > > On Fri, Oct 26, 2018 at 1:28 PM Alexandre Bruyere <
> > > > bruyere.alexandre@gmail.com> wrote:
> > > >
> > > > > No progress in UI, no status.
> > > > >
> > > > > How would I make sure there are no redirections? At a glance there
> > > > doesn't
> > > > > seem to be any.
> > > > >
> > > > > On Fri, Oct 26, 2018 at 12:33 PM Andrija Panic <
> > > andrija.panic@gmail.com>
> > > > > wrote:
> > > > >
> > > > >> Make sure no http redirections, no ssl support (not sure if https
> > URLs
> > > > are
> > > > >> supported now in 4.11 or not). Only plain http adn status code
200
> > :)
> > > > >>
> > > > >> Do you see percentage /download progress in UI ?
> > > > >>
> > > > >> On Fri, Oct 26, 2018, 18:20 Alexandre Bruyere <
> > > > >> bruyere.alexandre@gmail.com>
> > > > >> wrote:
> > > > >>
> > > > >> > Hello.
> > > > >> >
> > > > >> > I've set up a Ubuntu 16.04.5 Cloudstack setup using this
> tutorial:
> > > > >> >
> > > > >> > https://rohityadav.cloud/blog/cloudstack-kvm/
> > > > >> >
> > > > >> > The only place I've strayed is that I've configured four
network
> > > > >> interfaces
> > > > >> > - enp3s0 set as manual config, enp3s0.10 set as manual config
> > (I've
> > > > made
> > > > >> > sure my system was VLAN-enabled), cloudbr0 as a
> > > statically-configured
> > > > >> > bridge to enp3s0 and cloudbr1 as a statically-configured
bridge
> to
> > > > >> > enp3s0.10 on VLAN 10.
> > > > >> >
> > > > >> > My problem is, I'm currently trying to import an iso (Ubuntu
> > Server)
> > > > >> from
> > > > >> > URL (
> > > http://releases.ubuntu.com/16.04/ubuntu-16.04.5-server-amd64.iso
> > > > )
> > > > >> in
> > > > >> > two zones (one on cloudbr0, one on cloudbr1).
> > > > >> >
> > > > >> > Adding the ISO seems to work fine, but they never become
> "ready".
> > > Any
> > > > >> tips
> > > > >> > as to why?
> > > > >> >
> > > > >> > (I will be testing direct download shortly)
> > > > >> >
> > > > >>
> > > > >
> > > >
> > >
> > >
> > > --
> > >
> > > Andrija Panić
> > >
> >
>
>
> --
>
> Andrija Panić
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message