cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Swastik Mittal <mittal.swas...@gmail.com>
Subject Re: systemvm
Date Wed, 04 Apr 2018 08:23:34 GMT
@Dag

By legacy I meant one way ssl. I have set ca strictness for client as false.

I am using 1 nic common for all the network, that is one bridge serving
both public and private network.

I am setting up a basic zone so I set my management within ip range of 10
and guest within a range of 100, and my statement vms get ip assigned
within those ranges successfully.

I used these similar configuration with ACL 4.6 and was able to run vm's
successfully.

Regards
Swastik

On 4 Apr 2018 1:44 p.m., "Dag Sonstebo" <Dag.Sonstebo@shapeblue.com> wrote:

> Swastik,
>
> Your issue is most likely with your network configuration rather than
> anything to do with firewalls or system VM templates.
>
> First of all – what do you mean by legacy mode? Are you referring to
> advanced or basic zone?
>
> Secondly – can you tell us how you have configured your networking?
>
> - How many NICs you are using and how have you configured them
> - What management vs public IP ranges you are using
> - How you have mapped your networking in CloudStack against the underlying
> hardware NICs
> - Can you also check what your “host” global setting is set to
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
> On 04/04/2018, 09:07, "Swastik Mittal" <mittal.swastik@gmail.com> wrote:
>
>     @jagdish
>
>     Yes I was using the same link.
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London  WC2N 4HSUK
> @shapeblue
>
>
>
> On 4 Apr 2018 1:07 p.m., "Jagdish Patil" <jagdishpatil316@gmail.com>
> wrote:
>
>     > Hey Swastik,
>     >
>     > download.cloudstack.org link doesn't look like an issue, but which
> version
>     > and which hypervisor are you using?
>     >
>     > For KVM, download this:
>     > http://download.cloudstack.org/systemvm/4.11/systemvmtemplat
> e-4.11.0-kvm.
>     > qcow2.bz2
>     >
>     > Regards,
>     > Jagdish Patil
>     >
>     > On Wed, Apr 4, 2018 at 1:00 PM Swastik Mittal <
> mittal.swastik@gmail.com>
>     > wrote:
>     >
>     > > Hey @jagdish
>     > >
>     > > I was using download.cloudstack.org to download systemVM. Is
> there any
>     > > bug within the template uploaded here?
>     > >
>     > > @Soundar
>     > >
>     > > I did disable firewall services but din't work. I'll check it again
>     > though.
>     > >
>     > > On 4/4/18, soundar rajan <bsoundarajan@gmail.com> wrote:
>     > > > disabled firewalld service on the hostname and check. you should
> able
>     > to
>     > > > access using console window.
>     > > >
>     > > > On Wed, Apr 4, 2018 at 10:07 AM, Swastik Mittal <
>     > > mittal.swastik@gmail.com>
>     > > > wrote:
>     > > >
>     > > >> Hey,
>     > > >>
>     > > >> I am installing ACS 4.11 (legacy mode), with management and
> host on
>     > same
>     > > >> server and out-of-band management disabled. My host is enabled
> and up
>     > > and
>     > > >> ssvm successfully running. Though agent state column shows only
> '-'.
>     > > >>
>     > > >> CPVM is also running successfully but when I open console
> window I get
>     > > >> unable to connect. Also I din't find check file in SSVM
> (accessed
>     > > through
>     > > >> terminal using ssh).
>     > > >>
>     > > >> From SSVM I can ssh into management but wget command to
> management
>     > local
>     > > >> host ain't working (is stuck at connecting but is not able to
>     > connect.).
>     > > >>
>     > > >> Agent log does not show any error, just mentions "trying to
> fetch
>     > > storage
>     > > >> pool from libvirt" all the time. I checked my storage pool
> through
>     > > "virsh
>     > > >> pool-list" and it shows the storage pool mentioned in local
> storage
>     > > under
>     > > >> agent.properties.
>     > > >>
>     > > >> Any ideas?
>     > > >>
>     > > >> Regards
>     > > >> Swastik
>     > > >>
>     > > >
>     > >
>     >
>
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message