cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Kurt K <k...@ihnetworks.com>
Subject Re: Templates are not showing
Date Tue, 22 Nov 2016 12:14:07 GMT
Hi Dag,

It has been confirmed that the connectivity from system vm is the reason 
for the issue. This is still not resolved. I am not getting a ping to 
outside.

I have followed the documentation cloudstack provided and in the network 
part they says to create tagged vlan's. Also we have loaded the required 
kernel module(8021q) into the server.

===
etho -- no ip's
etho.100 -- Internal IP
eth0.200 -- points to cloudbr0
eth0.300 -- points to cloudbr1
====

In this procedure they says to add plain configuration without IP 
address. 
http://cloudstack-installation.readthedocs.io/en/4.3/hypervisor_installation.html#configure-the-network-bridges

I have followed the above procedure and entered all the required things 
in the initial setup. Am I wrong anywhere ? Is there any method other 
than tagged vlan's ?

I have one more NIC eth1 which have a public IP and is currently used to 
access the server.

Also, Can you suggest any URL's/blogs for creating network bridges on 
cloudstack

-kurt

On 11/17/2016 02:39 PM, Dag Sonstebo wrote:
> Hi Kurt,
>
> The results you have posted up are from your console proxy (v-2-VM), not your SSVM (possibly
typo?).
>
> Can you post up the same results from your SSVM? If this isn’t working – i.e. you
can’t connect to it – then try to recreate it, make a note of the private IP and connect
to it as per the wiki article.
>
> Regards,
> Dag Sonstebo
>
> On 17/11/2016, 02:51, "Kurt K" <kurt@ihnetworks.com> wrote:
>
>      Hi Dag,
>      
>      We have executed the *SSVM health check* systemvm-ssvm-check.sh script
>      on SSVM  and its results are pasted below.
>      
>      ====
>      root@v-2-VM:~# /usr/local/cloud/systemvm/ssvm-check.sh
>      ================================================
>      First DNS server is 8.8.8.8
>      PING 8.8.8.8 (8.8.8.8): 48 data bytes
>      --- 8.8.8.8 ping statistics ---
>      2 packets transmitted, 0 packets received, 100% packet loss
>      WARNING: cannot ping DNS server
>      route follows
>      Kernel IP routing table
>      Destination Gateway Genmask Flags Metric Ref Use Iface
>      0.0.0.0 XX.XX.XX.XX 0.0.0.0 UG 0 0 0 eth2
>      8.8.8.8 10.10.48.1 255.255.255.255 UGH 0 0 0 eth1
>      10.10.48.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
>      XX.XX.XX.XX 0.0.0.0 255.255.255.240 U 0 0 0 eth2
>      XX.XX.XX.XX 10.10.48.1 255.255.255.255 UGH 0 0 0 eth1
>      169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
>      ================================================
>      ERROR: DNS not resolving download.cloud.com
>      resolv.conf follows
>      nameserver 8.8.8.8
>      nameserver 8.8.8.8
>      nameserver 4.2.2.1
>      root@v-2-VM:~#
>      ====
>      
>      But we were unable to connect to in/out from SSVM.  There is one private
>      IP and public IP on SSVM.  We have checked the firewall and there was no
>      reject rules in it.
>      
>      Any suggestions?
>      
>      -Kurt
>      
>      On 11/11/2016 06:22 PM, Dag Sonstebo wrote:
>      > Hi Kurt,
>      >
>      > My original comment stands – it seems you do not have a healthy SSVM at the
moment – until this has been sorted you will not be able to upload templates.
>      >
>      > The systemvm-ssvm-check.sh script lives on the SSVM itself – please see https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM,+templates,+Secondary+storage+troubleshooting
for how to access this. When you run the script it will do the basic checks for connectivity
and NFS access and hopefully give you an idea what is wrong. If you can run this and post
up the results we can advise further.
>      >
>      > Regards,
>      > Dag Sonstebo
>      >
>      > On 11/11/2016, 12:42, "Kurt K" <kurt@ihnetworks.com> wrote:
>      >
>      >      Hi Dag,
>      >
>      >      We have recreated the SSVM, but still no luck :( . Regarding
>      >      ssvm-check.sh check script,  it was not presented on management server.
>      >
>      >      ===
>      >      [root@manage1 /]# ls /usr/local/cloud/systemvm-ssvm-check.sh
>      >      ls: cannot access /usr/local/cloud/systemvm-ssvm-check.sh: No such file
>      >      or directory
>      >      ===
>      >
>      >      While registering an ISO, we are getting the following errors.
>      >
>      >      ===
>      >      2016-11-11 03:27:28,998 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
>      >      (catalina-exec-7:ctx-23ce7527 ctx-47f4a89e) template 202 is not in
>      >      store:1, type:Image
>      >      2016-11-11 03:27:29,118 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
>      >      (catalina-exec-7:ctx-23ce7527 ctx-47f4a89e) template 202 is already in
>      >      store:1, type:Image
>      >      2016-11-11 03:27:29,257 DEBUG [o.a.c.s.i.BaseImageStoreDriverImpl]
>      >      (catalina-exec-7:ctx-23ce7527 ctx-47f4a89e) Downloading template to data
>      >      store 1
>      >      2016-11-11 03:27:29,263 WARN [c.c.s.d.DownloadMonitorImpl]
>      >      (catalina-exec-7:ctx-23ce7527 ctx-47f4a89e) There is no secondary
>      >      storage VM for downloading template to image store
>      >      nfs://162.x.x.x/export/secondary
>      >      ===
>      >
>      >      We had tried every possible workarounds, but none of them working. Is
>      >      this have any relation with NFS version on server? we are using nfs 4.
>      >      Moreover I did some searches and  some one recommend to set this
>      >      parameter "secstorage.allowed.internal.sites" value. I have set this to
>      >      our IP range, still no luck.
>      >
>      >
>      >      We have followed the general installation step on this doc
>      >      http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.6/index.html
>      >      . Are we miss anything on NFS server setup side? please let us know .
>      >      Also this time, we have excluded the NFS server and use management
>      >      server as NFS itself. The same issue out there.
>      >
>      >      Do you have any other specific step or any other instructions for
>      >      configuring the cloudstack apart from cloudstack doc ?
>      >
>      >      We were totally stuck here.
>      >
>      >      -Kurt
>      >
>      >      On 11/10/2016 09:09 PM, Dag Sonstebo wrote:
>      >      > Sounds like your SSVM isn’t too healthy – I would first of all
delete it, let CS recreate the new one and see if the template starts downloading thereafter.
>      >      > If you still have problems afterwards do some troubleshooting on
your new SSVM – e.g. run the /usr/local/cloud/systemvm-ssvm-check.sh script and see if all
your connectivity is in place.
>      >      >
>      >      > Regards,
>      >      > Dag Sonstebo
>      >      >
>      >      > On 10/11/2016, 13:46, "Kurt K" <kurt@ihnetworks.com> wrote:
>      >      >
>      >      >      Hi Dag,
>      >      >
>      >      >       >> Can you clarify what the problem is?
>      >      >
>      >      >      Please see the below URLs.
>      >      >      ===
>      >      >      http://s1152.photobucket.com/user/vincemd12/media/CloudS1_zps1uz6qwjt.png.html
>      >      >      http://s1152.photobucket.com/user/vincemd12/media/CloudS_zps59mfxgti.png.html
>      >      >      ===
>      >      >
>      >      >      When we try to create the instance via management UI, there
were no
>      >      >      default templates detected on template selection option. The
above
>      >      >      pasted URLs described the same. 2 system VMs are also running
fine. At
>      >      >      the same time, the management server log captures the below
debug errors.
>      >      >
>      >      >      ===
>      >      >      2016-11-10 05:42:10,947 DEBUG [c.c.s.StatsCollector]
>      >      >      (StatsCollector-3:ctx-81097a24) There is no secondary storage
VM for
>      >      >      secondary storage host nfs://162.x.x.x/export/secondary
>      >      >      ===
>      >      >
>      >      >      Any idea?
>      >      >
>      >      >      Regards,
>      >      >      Kurt
>      >      >
>      >      >
>      >      >      On 11/10/2016 04:27 PM, Dag Sonstebo wrote:
>      >      >      > Hi Kurt,
>      >      >      >
>      >      >      > That looks all healthy, and the following shows your system
VM template + the standard CentOS 5.6 template being OK:
>      >      >      >
>      >      >      > | 3 | routing-3 | SystemVM Template (KVM) | SYSTEM | 2016-11-10
01:48:12| NULL | KVM | Active |
>      >      >      > | 4 | centos55-x86_64 | CentOS 5.5(64-bit) no GUI (KVM)
| BUILTIN |2016-11-10 01:48:12 | NULL | KVM | Active |
>      >      >      >
>      >      >      > In addition to that – if you have system VMs running
you must by definition have the system VM template downloaded OK.
>      >      >      >
>      >      >      > Can you clarify what the problem is?
>      >      >      >
>      >      >      > Regards,
>      >      >      > Dag Sonstebo
>      >      >      >
>      >      >      > On 10/11/2016, 10:35, "Kurt K" <kurt@ihnetworks.com>
wrote:
>      >      >      >
>      >      >      >      Hi Dag,
>      >      >      >
>      >      >      >      The mentioned details are pasted below.
>      >      >      >
>      >      >      >      =====
>      >      >      >      [root@nfs1 secondary]# tree .
>      >      >      >      .
>      >      >      >      └── template
>      >      >      >           └── tmpl
>      >      >      >               └── 1
>      >      >      >                   └── 3
>      >      >      >                       ├── 073ecae0-38a0-4a08-87c2-0f5c0f725955.qcow2
>      >      >      >                       └── template.properties
>      >      >      >
>      >      >      >      4 directories, 2 files
>      >      >      >      ==
>      >      >      >      mysql> SELECT
>      >      >      >      id,unique_name,name,type,created,removed,hypervisor_type,state
FROM
>      >      >      >      cloud.vm_template;
>      >      >      >      +-----+---------------------+---------------------------------------+---------+---------------------+---------+-----------------+----------+
>      >      >      >      | id | unique_name | name | type | created | removed
| hypervisor_type |
>      >      >      >      state |
>      >      >      >      +-----+---------------------+---------------------------------------+---------+---------------------+---------+-----------------+----------+
>      >      >      >      | 1 | routing-1 | SystemVM Template (XenServer) |
SYSTEM | 2016-11-10
>      >      >      >      01:48:12 | NULL | XenServer | Active |
>      >      >      >      | 2 | centos53-x86_64 | CentOS 5.3(64-bit) no GUI
(XenServer) | BUILTIN
>      >      >      >      | 2016-11-10 01:48:12 | NULL | XenServer | Inactive
|
>      >      >      >      | 3 | routing-3 | SystemVM Template (KVM) | SYSTEM
| 2016-11-10 01:48:12
>      >      >      >      | NULL | KVM | Active |
>      >      >      >      | 4 | centos55-x86_64 | CentOS 5.5(64-bit) no GUI
(KVM) | BUILTIN |
>      >      >      >      2016-11-10 01:48:12 | NULL | KVM | Active |
>      >      >      >      | 5 | centos56-x86_64-xen | CentOS 5.6(64-bit) no
GUI (XenServer) |
>      >      >      >      BUILTIN | 2016-11-10 01:48:12 | NULL | XenServer |
Active |
>      >      >      >      | 6 | centos64-x64 | CentOS 6.4(64-bit) GUI (Hyperv)
| BUILTIN |
>      >      >      >      2016-11-10 01:48:13 | NULL | Hyperv | Active |
>      >      >      >      | 7 | centos53-x64 | CentOS 5.3(64-bit) no GUI (vSphere)
| BUILTIN |
>      >      >      >      2016-11-10 01:48:13 | NULL | VMware | Active |
>      >      >      >      | 8 | routing-8 | SystemVM Template (vSphere) | SYSTEM
| 2016-11-10
>      >      >      >      01:48:13 | NULL | VMware | Active |
>      >      >      >      | 9 | routing-9 | SystemVM Template (HyperV) | SYSTEM
| 2016-11-10
>      >      >      >      01:48:13 | NULL | Hyperv | Active |
>      >      >      >      | 10 | routing-10 | SystemVM Template (LXC) | SYSTEM
| 2016-11-10
>      >      >      >      01:50:37 | NULL | LXC | Active |
>      >      >      >      | 200 | vmware-tools.iso | vmware-tools.iso | PERHOST
| 2016-11-10
>      >      >      >      09:53:02 | NULL | VMware | Active |
>      >      >      >      | 201 | xs-tools.iso | xs-tools.iso | PERHOST | 2016-11-10
09:53:02 |
>      >      >      >      NULL | XenServer | Active |
>      >      >      >      +-----+---------------------+---------------------------------------+---------+---------------------+---------+-----------------+----------+
>      >      >      >      12 rows in set (0.00 sec)
>      >      >      >      =====
>      >      >      >
>      >      >      >       From SystemVMs under the infrastructure, shows 2
VMs running. One is
>      >      >      >      console-proxy server and other one is secondary storage
VM.
>      >      >      >
>      >      >      >      We have connected to the servers via internal IP.
>      >      >      >
>      >      >      >      -Kurt
>      >      >      >
>      >      >      >
>      >      >      >      On 11/10/2016 02:51 PM, Dag Sonstebo wrote:
>      >      >      >      > Hi Kurt,
>      >      >      >      >
>      >      >      >      > Can you provide the following:
>      >      >      >      >
>      >      >      >      > - A file listing (e.g. a “tree” dump) of
the contents of nfs://162.219.249.166/export/secondary
>      >      >      >      > - Output of the following from your DB: SELECT
id,unique_name,name,type,created,removed,hypervisor_type,state FROM cloud.vm_template;
>      >      >      >      >
>      >      >      >      > Going by the logs it could look like the system
VM template is downloaded OK, but your problem may be that system VMs are unable to start.
>      >      >      >      >
>      >      >      >      >
>      >      >      >      > Regards,
>      >      >      >      > Dag Sonstebo
>      >      >      >      >
>      >      >      >      > On 10/11/2016, 05:54, "Kurt K" <kurt@ihnetworks.com>
wrote:
>      >      >      >      >
>      >      >      >      >      Hi Dag,
>      >      >      >      >
>      >      >      >      >      We were getting below logs from management
server.
>      >      >      >      >
>      >      >      >      >
>      >      >      >      >      ====
>      >      >      >      >      2016-11-09 21:36:53,096 DEBUG [c.c.a.t.Request]
>      >      >      >      >      (AgentManager-Handler-4:null) Seq 1-4251679523214458881:
Processing:  {
>      >      >      >      >      Ans: , MgmtId: 207381009036, via: 1, Ver:
v1, Flags: 10,
>      >      >      >      >      [{"com.cloud.agent.api.ModifyStoragePoolAnswer":{"poolInfo":{"host":"162.x.x.x","localPath":"/mnt//380ea4ee-87df-39eb-92f4-730dfea4655a","hostPath":"/export/primary","poolType":"NetworkFilesystem","capacityBytes":979751665664,"availableBytes":977581113344},"templateInfo":{},"result":true,"wait":0}}]
>      >      >      >      >      }
>      >      >      >      >      2016-11-09 21:36:53,451 INFO  [o.a.c.s.i.TemplateServiceImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) Downloading
builtin template
>      >      >      >      >      centos55-x86_64 to data center: 1
>      >      >      >      >      2016-11-09 21:36:53,461 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) template
4 is already in store:1,
>      >      >      >      >      type:Image
>      >      >      >      >      2016-11-09 21:36:53,571 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) template
4 is already in store:1,
>      >      >      >      >      type:Image
>      >      >      >      >      2016-11-09 21:36:53,709 DEBUG [o.a.c.s.i.BaseImageStoreDriverImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) Downloading
template to data store 1
>      >      >      >      >      2016-11-09 21:36:53,720 WARN  [c.c.s.d.DownloadMonitorImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) There
is no secondary storage VM
>      >      >      >      >      for downloading template to image store
>      >      >      >      >      nfs://162.219.249.166/export/secondary
>      >      >      >      >      2016-11-09 21:36:53,725 DEBUG [o.a.c.s.i.TemplateDataFactoryImpl]
>      >      >      >      >      (AgentConnectTaskPool-1:ctx-4e501d7e) template
4 is already in store:1,
>      >      >      >      >      type:Image
>      >      >      >      >      ====
>      >      >      >      >
>      >      >      >      >      -Kurt
>      >      >      >      >
>      >      >      >      >      On 11/10/2016 11:05 AM, Kurt K wrote:
>      >      >      >      >      > Hi Dag,
>      >      >      >      >      >
>      >      >      >      >      > We had mounted the NFS share on management
server before executed the
>      >      >      >      >      > script. Also there was no  /secondary
or other local directory on our
>      >      >      >      >      > management server. All that presented
is NFS secondary share.
>      >      >      >      >      >
>      >      >      >      >      > Can we change any global settings or
alter cloud DB entries for the
>      >      >      >      >      > working of this template?
>      >      >      >      >      >
>      >      >      >      >      > -Kurt
>      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      > On 11/09/2016 07:54 PM, Dag Sonstebo
wrote:
>      >      >      >      >      >> Hi Kurt,
>      >      >      >      >      >>
>      >      >      >      >      >> As Simon is hinting at it looks
like you didn’t mount the secondary
>      >      >      >      >      >> storage NFS share on your management
server before running:
>      >      >      >      >      >>
>      >      >      >      >      >> "/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
>      >      >      >      >      >>
>      >      >      >      >      >> -m /secondary -u
>      >      >      >      >      >> http://cloudstack.apt-get.eu/systemvm/4.6/systemvm64template-4.6.0-kvm.qcow2.bz2
>      >      >      >      >      >>
>      >      >      >      >      >> -h kvm -F"
>      >      >      >      >      >>
>      >      >      >      >      >> In other words the template downloaded
to the local folder /secondary
>      >      >      >      >      >> on the management server rather
than to a mounted NFS share.
>      >      >      >      >      >> If this is the case delete the
contents of your local /secondary
>      >      >      >      >      >> folder, mount the NFS share in
the same folder and re-run the script
>      >      >      >      >      >> above.
>      >      >      >      >      >>
>      >      >      >      >      >> With regards to downloading from
the GUI – keep in mind you have a
>      >      >      >      >      >> chicken-and-egg scenario – until
you have first downloaded the system
>      >      >      >      >      >> VM template with the above script
CloudStack can not create a SSVM,
>      >      >      >      >      >> hence it will not be able to download
any further templates.
>      >      >      >      >      >>
>      >      >      >      >      >> Regards,
>      >      >      >      >      >> Dag Sonstebo
>      >      >      >      >      >>
>      >      >      >      >      >> From: Kurt K <kurt@ihnetworks.com>
>      >      >      >      >      >> Reply-To: "users@cloudstack.apache.org"
<users@cloudstack.apache.org>
>      >      >      >      >      >> Date: Wednesday, 9 November 2016
at 14:14
>      >      >      >      >      >> To: "users@cloudstack.apache.org"
<users@cloudstack.apache.org>
>      >      >      >      >      >> Subject: Re: Templates are not
showing
>      >      >      >      >      >>
>      >      >      >      >      >> Hi Simon,
>      >      >      >      >      >>
>      >      >      >      >      >> Thanks for the response.
>      >      >      >      >      >>
>      >      >      >      >      >>   >> Is your secondary storage
on a separate NFS server?
>      >      >      >      >      >>
>      >      >      >      >      >> Yeah, we have used separate NFS
server.
>      >      >      >      >      >>
>      >      >      >      >      >>>> Have you added the secondary
storage mount to CloudStack Management?
>      >      >      >      >      >> We had tried this.  But no luck.
>      >      >      >      >      >>
>      >      >      >      >      >> ===
>      >      >      >      >      >> 162.x.x.x:/export/secondary nfs
913G 2.0G 865G 1% /mnt/secondary
>      >      >      >      >      >> ===
>      >      >      >      >      >>
>      >      >      >      >      >> However, we have tried to download
a CentOS 6.5 ISO directly using
>      >      >      >      >      >> register ISO option from Management
UI. There was no downloading
>      >      >      >      >      >> status shows and ready status as
no. Please see the below snippets
>      >      >      >      >      >> and attached screen shots.
>      >      >      >      >      >>
>      >      >      >      >      >> ===
>      >      >      >      >      >> [root@nfs1 3]# pwd;ll
>      >      >      >      >      >> /export/secondary/template/tmpl/1/3
>      >      >      >      >      >> total 315396
>      >      >      >      >      >> -rw-r--r--. 1 root root 322954240
Nov 8 23:45
>      >      >      >      >      >> 37ad47be-223d-43ff-ae2c-f10548274c95.qcow2
>      >      >      >      >      >> -rw-r--r--. 1 root root 295 Nov
9 04:30 template.properties
>      >      >      >      >      >> ===
>      >      >      >      >      >>
>      >      >      >      >      >> Any idea about this?
>      >      >      >      >      >>
>      >      >      >      >      >> -Kurt
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> On 11/08/2016 10:25 PM, Simon Weller
wrote:
>      >      >      >      >      >>
>      >      >      >      >      >> Hi Kurt,
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> Is your secondary storage on a
separate NFS server?
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> Have you added the secondary storage
mount to CloudStack Management?
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> If so, have you tried mounting
your secondary storage on a different
>      >      >      >      >      >> server to make sure the permissions
are set correctly?
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> - Si
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> ________________________________
>      >      >      >      >      >>
>      >      >      >      >      >> From: Kurt K <kurt@ihnetworks.com><mailto:kurt@ihnetworks.com>
>      >      >      >      >      >>
>      >      >      >      >      >> Sent: Tuesday, November 8, 2016
8:48 AM
>      >      >      >      >      >>
>      >      >      >      >      >> To: users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>
>      >      >      >      >      >>
>      >      >      >      >      >> Subject: Fwd: Templates are not
showing
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> -------- Forwarded Message --------
>      >      >      >      >      >>
>      >      >      >      >      >> Subject:         Templates are
not showing
>      >      >      >      >      >>
>      >      >      >      >      >> Date:    Tue, 8 Nov 2016 20:09:17
+0530
>      >      >      >      >      >> Dag.Sonstebo@shapeblue.com
>      >      >      >      >      >> www.shapeblue.com
>      >      >      >      >      >> 53 Chandos Place, Covent Garden,
London  WC2N 4HSUK
>      >      >      >      >      >> @shapeblue
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> From:    Kurt K <kurt@ihnetworks.com><mailto:kurt@ihnetworks.com>
>      >      >      >      >      >>
>      >      >      >      >      >> To: users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> Hi There,
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> We have started to build our own
cloud platform on our organization. Our
>      >      >      >      >      >>
>      >      >      >      >      >> deployment is like a small scale
arch. We have used 4 KVM hyper visor
>      >      >      >      >      >>
>      >      >      >      >      >> servers and 1 management server
and 3 storage servers. We have
>      >      >      >      >      >>
>      >      >      >      >      >> successfully configured all those
servers. But while creating the
>      >      >      >      >      >>
>      >      >      >      >      >> instance, there were no templates
shown on management UI. We have
>      >      >      >      >      >>
>      >      >      >      >      >> downloaded the templates using
this script
>      >      >      >      >      >>
>      >      >      >      >      >> "/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> -m /secondary -u
>      >      >      >      >      >>
>      >      >      >      >      >> http://cloudstack.apt-get.eu/systemvm/4.6/systemvm64template-4.6.0-kvm.qcow2.bz2
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> -h kvm -F", it was on secondary
partition. But didn't show up there on
>      >      >      >      >      >>
>      >      >      >      >      >> management UI. Is there any other
thing need to be done to show up
>      >      >      >      >      >>
>      >      >      >      >      >> templates on UI?
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> Any help or suggestions from your
end is much appreciated.
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> Regards,
>      >      >      >      >      >>
>      >      >      >      >      >> Kurt K
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >>
>      >      >      >      >      >> --
>      >      >      >      >      >> ~Kurt
>      >      >      >      >
>      >      >      >      >
>      >      >      >      >      --
>      >      >      >      >      *~Kurt *
>      >      >      >      >
>      >      >      >      >
>      >      >      >      >
>      >      >      >      > Dag.Sonstebo@shapeblue.com
>      >      >      >      > www.shapeblue.com
>      >      >      >      > 53 Chandos Place, Covent Garden, London  WC2N
4HSUK
>      >      >      >      > @shapeblue
>      >      >      >      >
>      >      >      >      >
>      >      >      >      >
>      >      >      >
>      >      >      >
>      >      >      >      --
>      >      >      >      *~Kurt *
>      >      >      >
>      >      >      >
>      >      >      >
>      >      >      > Dag.Sonstebo@shapeblue.com
>      >      >      > www.shapeblue.com
>      >      >      > 53 Chandos Place, Covent Garden, London  WC2N 4HSUK
>      >      >      > @shapeblue
>      >      >      >
>      >      >      >
>      >      >      >
>      >      >
>      >      >
>      >      >      --
>      >      >      *~Kurt *
>      >      >
>      >      >
>      >      >
>      >      > Dag.Sonstebo@shapeblue.com
>      >      > www.shapeblue.com
>      >      > 53 Chandos Place, Covent Garden, London  WC2N 4HSUK
>      >      > @shapeblue
>      >      >
>      >      >
>      >      >
>      >
>      >
>      >      --
>      >      *~Kurt *
>      >
>      >
>      >
>      >
>      >
>      >
>      
>      
>      --
>      *~Kurt *
>      
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London  WC2N 4HSUK
> @shapeblue
>    
>   
>


-- 
*~Kurt *

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message