cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Semih Tolga DEMİR <semihtolgade...@gmail.com>
Subject Re: Adding Ethernet Card
Date Thu, 04 Feb 2016 16:12:37 GMT
Hi,

Ok,we will give up Security Groups  option but if we use NAT + Shared
network,  Is it possible to evaluate both ethernet usage which taken ACS?
and Can we will see ethernet usage separately?

Thanks.

2016-02-04 17:06 GMT+02:00 Nux! <nux@li.nux.ro>:

> Hello,
>
> You can't have Security Groups in a pure advanced zone (ie without
> security groups).
> If you opt for an Advanced zone with Security Groups then you can't have
> more than one NIC per VM (sux, I know).
> So basically it can't be done.
>
> The closest you can go for IMHO is in an Advanced Zone to add your VM to a
> NAT-ed 10.x network (I highly discourage you to use /8) and if you really
> must have public IPs, then go for a shared network - however security
> groups are not available, so you will need to firewall this somehow
> yourself.
>
> HTH
> Lucian
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> ----- Original Message -----
> > From: "Semih Tolga DEMİR" <semihtolgademir@gmail.com>
> > To: users@cloudstack.apache.org
> > Sent: Thursday, 4 February, 2016 11:51:48
> > Subject: Adding Ethernet Card
>
> > Hi;
> >
> > I need to setup/design an advanced networking with the following features
> > like below and i like to ask if its possbile or not.
> >
> >
> >
> > All vm's have 2 ethernet cards.
> >
> > 1) This ethernet uses real ip(public) for internet access with security
> > groups enabled. This ethernets, networks default gateway directly points
> to
> > the gateway at network, it will not pass thru ACS virtual router, we do
> not
> > want to make any NAT or SNAT operation over ACS virtual router.
> >
> >
> >
> > 2) This ethernet will use virtual ip like 10.0.0.0/8 for guest network
> and
> > all vm's use this ip for vm interconnect.
> >
> >
> >
> > After this setup we like to calculate bandwidth usage only for the first
> > ethernet card, we do not want to calculate usage for vm interconnect.
> >
> >
> >
> > Thanks
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message