cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Nux! <...@li.nux.ro>
Subject Re: Adding Ethernet Card
Date Thu, 04 Feb 2016 16:30:25 GMT
Virtual NICs/networks can be linked to different physical interfaces on the hypervisor, if
that's what you're asking.

--
Sent from the Delta quadrant using Borg technology!

Nux!
www.nux.ro

----- Original Message -----
> From: "Semih Tolga DEMİR" <semihtolgademir@gmail.com>
> To: users@cloudstack.apache.org
> Sent: Thursday, 4 February, 2016 16:12:37
> Subject: Re: Adding Ethernet Card

> Hi,
> 
> Ok,we will give up Security Groups  option but if we use NAT + Shared
> network,  Is it possible to evaluate both ethernet usage which taken ACS?
> and Can we will see ethernet usage separately?
> 
> Thanks.
> 
> 2016-02-04 17:06 GMT+02:00 Nux! <nux@li.nux.ro>:
> 
>> Hello,
>>
>> You can't have Security Groups in a pure advanced zone (ie without
>> security groups).
>> If you opt for an Advanced zone with Security Groups then you can't have
>> more than one NIC per VM (sux, I know).
>> So basically it can't be done.
>>
>> The closest you can go for IMHO is in an Advanced Zone to add your VM to a
>> NAT-ed 10.x network (I highly discourage you to use /8) and if you really
>> must have public IPs, then go for a shared network - however security
>> groups are not available, so you will need to firewall this somehow
>> yourself.
>>
>> HTH
>> Lucian
>>
>> --
>> Sent from the Delta quadrant using Borg technology!
>>
>> Nux!
>> www.nux.ro
>>
>> ----- Original Message -----
>> > From: "Semih Tolga DEMİR" <semihtolgademir@gmail.com>
>> > To: users@cloudstack.apache.org
>> > Sent: Thursday, 4 February, 2016 11:51:48
>> > Subject: Adding Ethernet Card
>>
>> > Hi;
>> >
>> > I need to setup/design an advanced networking with the following features
>> > like below and i like to ask if its possbile or not.
>> >
>> >
>> >
>> > All vm's have 2 ethernet cards.
>> >
>> > 1) This ethernet uses real ip(public) for internet access with security
>> > groups enabled. This ethernets, networks default gateway directly points
>> to
>> > the gateway at network, it will not pass thru ACS virtual router, we do
>> not
>> > want to make any NAT or SNAT operation over ACS virtual router.
>> >
>> >
>> >
>> > 2) This ethernet will use virtual ip like 10.0.0.0/8 for guest network
>> and
>> > all vm's use this ip for vm interconnect.
>> >
>> >
>> >
>> > After this setup we like to calculate bandwidth usage only for the first
>> > ethernet card, we do not want to calculate usage for vm interconnect.
>> >
>> >
>> >
>> > Thanks

Mime
View raw message