cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From sebgoa <run...@gmail.com>
Subject Re: Docker Support?
Date Thu, 05 Feb 2015 09:07:02 GMT

On Feb 5, 2015, at 9:07 AM, cs user <acldstkusr@gmail.com> wrote:

> Hi Osay,
> 
> I'd be really interested to hear about how you get on with the Cloudstack
> Driver for Docker Machine, using the CoreOS template.
> 

FYI, there are two pull requests in Docker machine that support cloudstack.
One for exoscale which can be used with basic zones, it works just fine.
One for advanced zone from Sander @schuberg philis, also works

Unfortunately the docker team has not merged them yet…hopefully soon.

if you git clone docker machine and applied the patches by hand , you will be good to go.

> Cheers! :-)
> 
> On Thu, Feb 5, 2015 at 6:20 AM, Osay Osman Yuuni <oyuuni@gmail.com> wrote:
> 
>> Thanks Lucian.  Actually I'm running this off of Xenserver.  I'll try with
>> "Other PV 64bit" and perhaps Ubuntu 12.04 to see the differences.
>> Cheers,
>> 
>> Osay
>> 
>> On 5 February 2015 at 00:26, Nux! <nux@li.nux.ro> wrote:
>> 
>>> On KVM "Other PV 64bit" will give you VirtIO (paravirt) disk and network
>>> which give you the best performance. You should always aim to use VirtIO,
>>> even with FreeBSD or Windows (though drivers will be needed for this
>> one).
>>> 
>>> CentOS/Debian/Ubuntu profiles might work, too, but I think at this stage
>>> they don't give you anything extra.
>>> 
>>> 
>>> Lucian
>>> 
>>> --
>>> Sent from the Delta quadrant using Borg technology!
>>> 
>>> Nux!
>>> www.nux.ro
>>> 
>>> ----- Original Message -----
>>>> From: "Andrei Mikhailovsky" <andrei@arhont.com>
>>>> To: users@cloudstack.apache.org
>>>> Sent: Wednesday, 4 February, 2015 21:26:28
>>>> Subject: Re: Docker Support?
>>> 
>>>> Osay,
>>>> 
>>>> You might want to try other OS types that support PV, like Other PV
>>> (64bit) or
>>>> even one of the Linux distros like Ubuntu 12.04 (64bit). I think disk
>>>> performance might improve.
>>>> 
>>>> Andrei
>>>> 
>>>> ----- Original Message -----
>>>> 
>>>>> From: "Osay Osman Yuuni" <oyuuni@gmail.com>
>>>>> To: users@cloudstack.apache.org
>>>>> Sent: Wednesday, 4 February, 2015 6:57:51 PM
>>>>> Subject: Re: Docker Support?
>>>> 
>>>>> Andrei,
>>>>> I specified Other (64 bit).
>>>> 
>>>>> Osay
>>>> 
>>>>> On 4 February 2015 at 18:00, Andrei Mikhailovsky <andrei@arhont.com>
>>>>> wrote:
>>>> 
>>>>>> Osay, what OS Type did you specify when you've uploaded the
>>>>>> template to
>>>>>> your acs?
>>>>>> 
>>>>>> Thanks
>>>>>> 
>>>>>> Andrei
>>>>>> 
>>>>>> ----- Original Message -----
>>>>>> 
>>>>>>> From: "Osay Osman Yuuni" <oyuuni@gmail.com>
>>>>>>> To: users@cloudstack.apache.org
>>>>>>> Sent: Wednesday, 4 February, 2015 3:24:16 PM
>>>>>>> Subject: Re: Docker Support?
>>>>>> 
>>>>>>> Hi Lucian and others. Thanks very much to this. By following
your
>>>>>>> suggestions I now have this working like snake oil. Like you
>>>>>>> mentioned
>>>>>>> this works great out of the box. I'm now heading off to github
to
>>>>>>> download
>>>>>>> the cloudstack enabled machine program to start some serious
>>>>>>> work.
>>>>>>> Great
>>>>>>> work and thanks for sharing the template and suggestions.
>>>>>> 
>>>>>>> Cheers,
>>>>>> 
>>>>>>> Osay
>>>>>> 
>>>>>>> PS: I never gave cloudmonkey a thought but after this I think
I'm
>>>>>>> going to
>>>>>>> consign the web gui to very mundane tasks.
>>>>>> 
>>>>>>> On 3 February 2015 at 21:32, Nux! <nux@li.nux.ro> wrote:
>>>>>> 
>>>>>>>> I use cloudmonkey for that, much better than the UI in many
>>>>>>>> respects.
>>>>>>>> 
>>>>>>>> Lucian
>>>>>>>> 
>>>>>>>> --
>>>>>>>> Sent from the Delta quadrant using Borg technology!
>>>>>>>> 
>>>>>>>> Nux!
>>>>>>>> www.nux.ro
>>>>>>>> 
>>>>>>>> ----- Original Message -----
>>>>>>>>> From: "Osay Osman Yuuni" <oyuuni@gmail.com>
>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>> Sent: Tuesday, 3 February, 2015 18:10:20
>>>>>>>>> Subject: Re: Docker Support?
>>>>>>>> 
>>>>>>>>> Thanks. I thought about it later and realised that
>>>>>>>>> functionality
>>>>>>>>> existed
>>>>>>>>> through the API.
>>>>>>>>> 
>>>>>>>>> Great work.
>>>>>>>>> 
>>>>>>>>> On Feb 3, 2015 6:29 PM, "Andrei Mikhailovsky"
>>>>>>>>> <andrei@arhont.com>
>>>>>>>>> wrote:
>>>>>>>>>> 
>>>>>>>>>> I think there is an API call for that (cloudmonkey
should
>>>>>>>>>> also
>>>>>>>>>> do that).
>>>>>>>>> the ACS GUI currently doesn't have that ability.
>>>>>>>>>> 
>>>>>>>>>> Andrei
>>>>>>>>>> ----- Original Message -----
>>>>>>>>>> 
>>>>>>>>>>> From: "Osay Osman Yuuni" <oyuuni@gmail.com>
>>>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>>>> Sent: Tuesday, 3 February, 2015 4:11:57 PM
>>>>>>>>>>> Subject: Re: Docker Support?
>>>>>>>>>> 
>>>>>>>>>>> Thanks Seb. Sorry forbabdb question but how do
I specify
>>>>>>>>>>> the
>>>>>>>>>>> key
>>>>>>>>>>> during
>>>>>>>>>>> instance creation based on the template?
>>>>>>>>>>> Osay
>>>>>>>>>>> On Feb 3, 2015 6:05 PM, "Sebastien Goasguen"
>>>>>>>>>>> <runseb@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>> 
>>>>>>>>>>>> 
>>>>>>>>>>>> On Feb 3, 2015, at 9:39 AM, Osay Osman Yuuni
>>>>>>>>>>>> <oyuuni@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>> 
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>> What do you mean "works totally out of
the box?".
>>>>>>>>>>>>> Without
>>>>>>>>>>>>> injecting ssh
>>>>>>>>>>>>> keys how does it work or are you referring
to running
>>>>>>>>>>>>> docker and
>>>>>>>>>>>>> related
>>>>>>>>>>>>> stuff straight out of the box?
>>>>>>>>>>>> 
>>>>>>>>>>>> I am saying that you don't need to tweak
the template.
>>>>>>>>>>>> 
>>>>>>>>>>>> if you register ssh keys in cloudstack and
deploy a VM
>>>>>>>>>>>> based
>>>>>>>>>>>> on
>>>>>>>>>>>> that
>>>>>>>>>>>> template specifying your ssh keys, you will
be logged in
>>>>>>>>>>>> ….out of
>>>>>>>>>>>> the box…
>>>>>>>>>>>> 
>>>>>>>>>>>> no need to install additional scripts in
the templates,
>>>>>>>>>>>> etc...
>>>>>>>>>>>> 
>>>>>>>>>>>>> 
>>>>>>>>>>>>> Osay
>>>>>>>>>>>>> 
>>>>>>>>>>>>> On 2 February 2015 at 15:31, Sebastien
Goasguen
>>>>>>>>>>>>> <runseb@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>> 
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> On Jan 31, 2015, at 7:27 PM, Andrei
Mikhailovsky
>>>>>>>>>>>>>> <andrei@arhont.com>
>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> I guess there has been a lot
of changes since i've
>>>>>>>>>>>>>>> last
>>>>>>>>>>>>>>> checked. When I
>>>>>>>>>>>>>> was testing it about half a year
ago, the ssh keys
>>>>>>>>>>>>>> did
>>>>>>>>>>>>>> not work
>>>>>>>>>>>>>> out of
>>>>>>>>>>>> the
>>>>>>>>>>>>>> box and had to be scipted into the
image itself
>>>>>>>>>>>>>> before
>>>>>>>>>>>>>> uploading
>>>>>>>>>>>>>> to acs.
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> it works totally out of the box.
As Lucian mentioned
>>>>>>>>>>>>>> if
>>>>>>>>>>>>>> you
>>>>>>>>>>>>>> start an
>>>>>>>>>>>>>> instance specifying an SSH key, the
instance will get
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> from
>>>>>>>>>>>>>> the VR
>>>>>>>>>>>>>> userdata….
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> as easy as pie and exactly like on
AWS or EC2
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> I pointed to the automated builds
from coreOS
>>>>>>>>>>>>>> directly
>>>>>>>>>>>>>> and the
>>>>>>>>>>>>>> scripts
>>>>>>>>>>>>>> used to setup the keys automatically.
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Andrei
>>>>>>>>>>>>>>> From: "Nux!" <nux@li.nux.ro>
>>>>>>>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>>>>>>>> Cc: runseb@gmail.com
>>>>>>>>>>>>>>> Sent: Saturday, 31 January, 2015
1:16:12 AM
>>>>>>>>>>>>>>> Subject: Re: Docker Support?
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Oh, forgot to add that userdata
scripts have also
>>>>>>>>>>>>>>> worked
>>>>>>>>>>>>>>> upon
>>>>>>>>>>>>>>> VM
>>>>>>>>>>>>>> deployment out of the box, so if
you'd like your
>>>>>>>>>>>>>> CoreOS
>>>>>>>>>>>>>> instance
>>>>>>>>>>>>>> to do
>>>>>>>>>>>> some
>>>>>>>>>>>>>> action you can script it here.
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Not sure how exactly it would
work better on
>>>>>>>>>>>>>>> Openstack
>>>>>>>>>>>>>>> as
>>>>>>>>>>>>>>> Andrei
>>>>>>>>>>>>>> intimated. Pretty much everything
seemed to work to
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> best of
>>>>>>>>>>>>>> my
>>>>>>>>>>>> (limited
>>>>>>>>>>>>>> Coreos) knowledge.
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Lucian
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sent from the Delta quadrant
using Borg technology!
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> Nux!
>>>>>>>>>>>>>>> www.nux.ro
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>>> From: "Nux!" <nux@li.nux.ro>
>>>>>>>>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>>>>>>>>> Cc: runseb@gmail.com
>>>>>>>>>>>>>>>> Sent: Saturday, 31 January,
2015 01:08:08
>>>>>>>>>>>>>>>> Subject: Re: Docker Support?
>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> What I needed to do in order
to get it working is
>>>>>>>>>>>>>>>> convert the
>>>>>>>>>>>>>>>> image to
>>>>>>>>>>>>>> QCOW2 (I
>>>>>>>>>>>>>>>> use KVM).
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> After that I have registered
the template with SSH
>>>>>>>>>>>>>>>> key
>>>>>>>>>>>>>>>> enabled
>>>>>>>>>>>>>>>> (You
>>>>>>>>>>>>>> can also
>>>>>>>>>>>>>>>> enable this feature in the
DB if you would like to
>>>>>>>>>>>>>>>> avoid
>>>>>>>>>>>>>> re-downloading the
>>>>>>>>>>>>>>>> template).
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> Once an instance was created
with one of my ssh
>>>>>>>>>>>>>>>> keys, I
>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>> login
>>>>>>>>>>>>>> via ssh as
>>>>>>>>>>>>>>>> core@IP with the said keypair.
>>>>>>>>>>>>>>>> The template has also nicely
expanded to fit my
>>>>>>>>>>>>>>>> custom
>>>>>>>>>>>>>>>> root
>>>>>>>>>>>>>>>> disk size.
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> For future convenience I've
added a daily jenkins
>>>>>>>>>>>>>>>> job
>>>>>>>>>>>>>>>> to build
>>>>>>>>>>>>>> Cloudstack
>>>>>>>>>>>>>>>> CoreOS, they should be available
shortly at:
>>>>>>>>>>>>>>>> http://dl.openvm.eu/cloudstack/coreos/x86_64/
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> HTH
>>>>>>>>>>>>>>>> Lucian
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Sent from the Delta quadrant
using Borg technology!
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> Nux!
>>>>>>>>>>>>>>>> www.nux.ro
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>>>> From: "Andrei Mikhailovsky"
<andrei@arhont.com>
>>>>>>>>>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>>>>>>>>>> Cc: runseb@gmail.com
>>>>>>>>>>>>>>>>> Sent: Friday, 30 January,
2015 14:39:32
>>>>>>>>>>>>>>>>> Subject: Re: Docker Support?
>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> Osay,
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> You need to check the
documentation on how to
>>>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>> ssh keys
>>>>>>>>>>>>>> into the
>>>>>>>>>>>>>>>>> template. Once you've
done this, you should be
>>>>>>>>>>>>>>>>> able to
>>>>>>>>>>>>>>>>> login
>>>>>>>>>>>>>>>>> with ssh
>>>>>>>>>>>>>> keys.
>>>>>>>>>>>>>>>>> I've done this once about
6 months back and it
>>>>>>>>>>>>>>>>> worked
>>>>>>>>>>>>>>>>> perfectly well.
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> I think the coreos is
works much better with
>>>>>>>>>>>>>>>>> openstack
>>>>>>>>>>>>>>>>> as it
>>>>>>>>>>>>>> integrates well
>>>>>>>>>>>>>>>>> with the environment
and automatically get's the
>>>>>>>>>>>>>>>>> user
>>>>>>>>>>>>>>>>> keys
>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>> openstack. So,
>>>>>>>>>>>>>>>>> you don't have to mess
about the recreating the
>>>>>>>>>>>>>>>>> template. I
>>>>>>>>>>>>>>>>> think
>>>>>>>>>>>>>> similar is
>>>>>>>>>>>>>>>>> done for major cloud
providers like amazon and
>>>>>>>>>>>>>>>>> rackspace,
>>>>>>>>>>>>>>>>> etc.
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>> Andrei
>>>>>>>>>>>>>>>>> ----- Original Message
-----
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> From: "Osay Osman
Yuuni" <oyuuni@gmail.com>
>>>>>>>>>>>>>>>>>> To: users@cloudstack.apache.org,
runseb@gmail.com
>>>>>>>>>>>>>>>>>> Sent: Friday, 30
January, 2015 8:22:28 AM
>>>>>>>>>>>>>>>>>> Subject: Re: Docker
Support?
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> Hi Seb,
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> I've converted the
.bin file into a .vhd file and
>>>>>>>>>>>>>>>>>> successfully
>>>>>>>>>>>>>>>>>> registered
>>>>>>>>>>>>>>>>>> this in Cloudstack.
However when I create an
>>>>>>>>>>>>>>>>>> instance
>>>>>>>>>>>>>>>>>> I'm
>>>>>>>>>>>>>>>>>> unable to
>>>>>>>>>>>>>>>>>> login.
>>>>>>>>>>>>>>>>>> I've tried core but
it asks for a password (which
>>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>>> don't
>>>>>>>>>>>>>>>>>> have). Do
>>>>>>>>>>>>>>>>>> you by
>>>>>>>>>>>>>>>>>> any chance know how
this template is used?
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> Osay
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>> On 28 January 2015
at 09:50, sebgoa
>>>>>>>>>>>>>>>>>> <runseb@gmail.com>
>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> On Jan 28, 2015,
at 1:12 AM, Phillip Kent
>>>>>>>>>>>>>>>>>>> <phillip.kent@xmlsoup.com>
>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Sorry for
naive question... I did not catch if
>>>>>>>>>>>>>>>>>>>> there is
a
>>>>>>>>>>>>>>>>>>>> simple
>>>>>>>>>>>>>>>>>>>> way
>>>>>>>>>>>>>>>>>>>> to convert
from the .bin file offered by CoreOS
>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>> an OVA
>>>>>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>> would upload
to ESX hypervisor in CloudStack ?
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> The .bin file
is just a raw image (last time I
>>>>>>>>>>>>>>>>>>> checked).
>>>>>>>>>>>>>>>>>>> You can
>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>> things like qemu-convert
to get it in the format
>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>> want.
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> ----------
Forwarded message ----------
>>>>>>>>>>>>>>>>>>>> From: Osay
Osman Yuuni <oyuuni@gmail.com>
>>>>>>>>>>>>>>>>>>>> To: users@cloudstack.apache.org
>>>>>>>>>>>>>>>>>>>> Cc:
>>>>>>>>>>>>>>>>>>>> Date: Tue,
27 Jan 2015 09:09:15 +0200
>>>>>>>>>>>>>>>>>>>> Subject:
Re: Docker Support?
>>>>>>>>>>>>>>>>>>>> Hi Nux!,
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> I got it
at last.
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> Thx.
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>> On 26 January
2015 at 17:46, Nux!
>>>>>>>>>>>>>>>>>>>> <nux@li.nux.ro>
>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Osay,
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> You might
want to get in touch with its
>>>>>>>>>>>>>>>>>>>>> creator,
I
>>>>>>>>>>>>>>>>>>>>> do not
>>>>>>>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>> https://github.com/svanharmelen
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> HTH
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> Sent
from the Delta quadrant using Borg
>>>>>>>>>>>>>>>>>>>>> technology!
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> Nux!
>>>>>>>>>>>>>>>>>>>>> www.nux.ro
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> -----
Original Message -----
>>>>>>>>>>>>>>>>>>>>>> From:
"Osay Osman Yuuni" <oyuuni@gmail.com>
>>>>>>>>>>>>>>>>>>>>>> To:
users@cloudstack.apache.org
>>>>>>>>>>>>>>>>>>>>>> Sent:
Monday, 26 January, 2015 14:25:48
>>>>>>>>>>>>>>>>>>>>>> Subject:
Re: Docker Support?
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Hi
Lucian,
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Thanks
for the pointer. I seem to be blind to
>>>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>>>> updated
>>>>>>>>>>>>>>>>>>>>>> README
>>>>>>>>>>>>>>>>>>>>> referred
>>>>>>>>>>>>>>>>>>>>>> to
in the pull request. I don't see any entry
>>>>>>>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>>>>>>>> cloudstack.
>>>>>>>>>>>>>>>>>>>>>> Still
>>>>>>>>>>>>>>>>>>>>>> searching.
Also I just found that there is an
>>>>>>>>>>>>>>>>>>>>>> image
for
>>>>>>>>>>>>>>>>>>>>>> cloudstact
at
>>>>>>>>>>>>>>>>>>>>>> CoreOS
(
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> 
>>>>>>>>>>>> 
>>>>>>>>> 
>>>>>>>> 
>>>>>> 
>>> 
>> http://stable.release.core-os.net/amd64-usr/current/coreos_production_cloudstack_image.bin.bz2
>>>>>>>>>>>>>>>>>>>>> ).
>>>>>>>>>>>>>>>>>>>>>> I'm
now wondering how this gets into a
>>>>>>>>>>>>>>>>>>>>>> template.
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Cheers
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> Osay
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>> On
26 January 2015 at 15:22, Nux!
>>>>>>>>>>>>>>>>>>>>>> <nux@li.nux.ro>
>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>> 
>>>>>>>>>>>>>>>>>>>>>>>
I've just stumbled upon this recently
>>>>>>>>>>>>>>>>>>>>>>>
https://github.com/docker/machine/pull/129
>>>>>>>>>>>>>>>>>>>>>>>

>>>>>>>>>>>>>>>>>>>>>>>
HTH
>>>>>>>>>>>>>>>>>>>>>>>
Lucian
>>>>>>>>>>>>>>>>>>>>>>>

>>>>>>>>>>>>>>>>>>>>>>>
--
>>>>>>>>>>>>>>>>>>>>>>>
Sent from the Delta quadrant using Borg
>>>>>>>>>>>>>>>>>>>>>>>
technology!
>>>>>>>>>>>>>>>>>>>>>>>

>>>>>>>>>>>>>>>>>>>>>>>
Nux!
>>>>>>>>>>>>>>>>>>>>>>>
www.nux.ro
>>>>>>>>>>>>>>>>>>>>>>>

>>>>>>>>>>>>>> 
>>>>>>>>>>>>>> 
>>>>>>>>>>>> 
>>>>>>>> 
>>> 
>> 


Mime
View raw message