cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Satya Narayana <nsnaray...@gmail.com>
Subject Re: Unable to download CentOS 5.5 nogui (KVM)
Date Tue, 02 Dec 2014 05:54:32 GMT
Hi,

Following is the snapshot on my Systemvm console.

root@s-3-VM:~# route -n
Kernel IP routing table
Destination                            Gateway
Genmask                        Iface
0.0.0.0                                  192.168.1.27
0.0.0.0                            eth2
169.254.0.0.                           0.0.0.0
255.255.0.0                     eth0
192.168.1.0                            0.0.0.0
255.255.255.0                  eth1
192.168.1.0                            0.0.0.0
255.255.255.0                  eth2
192.168.1.0                            0.0.0.0
255.255.255.0                  eth3

root@s-3-VM:~# ping 192.168.1.2
2 packets transmitted 2 packets received, 0% loss

root@s-3-VM:~# ifconfig
eth0        169.254.0.110
eth1         192.168.1.6
eth2          192.168.1.27
eth3          192.168.1.9

I installed Management Server and configured NFS on same node with IP
192.168.1.2

Regards,
Satya



On Tue, Dec 2, 2014 at 11:04 AM, Jayapal Reddy Uradi <
jayapalreddy.uradi@citrix.com> wrote:

> Hi,
>
> Please check the routing table on the SSVM.
> Check the reachability of the storage network from the SSVM.
>
>
> Thanks,
> Jayapal
> On 02-Dec-2014, at 10:55 AM, Satya Narayana <nsnarayana@gmail.com>
>  wrote:
>
> > I am not getting Download Complete status after clicking on CentOS5.5(64
> > bit) no GUI (KVM) link in Templates page.
> >
> > My routing table on Management Server node is as follows.
> >
> > Destination          Gateway               Genmask            Iface
> > 192.168.1.0           0.0.0.0                 255.255.255.0      eth0
> > 192.168.122.0        0.0.0.0                255.255.255.0       virbr0
> > 10.244.10.0            0.0.0.0                255.255.254.0      wlan0
> > 169.254.0.0.          0.0.0.0                 255.255.0.0         eth0
> > 0.0.0.0                  192.168.1.2          0.0.0.0                eth0
> >
> > ifconfig result on MS node is as follows
> >
> > eth0       192.168.1.2
> > virbr0      192.168.122.1
> > wlan0      10.244.11.109
> >
> > --
> > Regds,
> > Satya
>
>


-- 
Regds,
Satya

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message