cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Abdul Rasool <rasool...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Fri, 17 Oct 2014 05:27:38 GMT
My Network config details are below.

192.168.200.0/24        cloudbr3 --> Management NW
192.168.100.0/24        cloudbr0 --> Guest+Public N/W
192.168.201.0/24        cloudbr4 --> Storage N/W
NO IP mention on NIC cloudbr5 --> Guest Additional Network.

I am trying to use guest additional network offering without using any ACS
offering like VR, DNS, DHCP, Firewall etc. I have created a new network
offering called Ex-LAN-NO-Offering while creating this I have not selected
any of the default offering from the list. at the end I have mention this
particular interface tags.thatz all.

In this physical NIC (cloudbr5) doesn’t have any existing network when I
try configuring new network using Ex-LAN-NO-Offering I am getting this
error *Network offering with specified id doesn't support adding multiple
ip ranges*.

Please help me am I doing any thing wrong here .

Thanks
AR

On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <kirkkosinski@gmail.com>
wrote:

> Please provide the complete details of the Network Offering you are
> trying to use.
>
> Best regards,
> Kirk
>
> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
> > Hi Kirk,
> >
> > Thanks for your suggestion,
> >
> > I have tried doing the same mentioning some IPs with service offering
> which
> > has not selected any of the cloudstack service in the list, & account
> > specified.  I get this below error Network offering with specified id
> > doesn't support adding multiple ip ranges
> >
> >
> > This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
> > physical NIC --> Guest---> Network --> add guest Network.
> >
> >
> > Please guide me why I am not able to add this new network on ACS.
> >
> > Regards,
> > AR
> >
> >
> > On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com>
> > wrote:
> >
> >> Hi, Abdul.  In your previous message you wrote:
> >>
> >>> I want to add additional
> >>> physical NIC to VM without mention IPs and service offering from
> >>> cloudstack
> >>
> >> To me this sounds like you want to make changes directly to a VM at the
> >> hypervisor level, so I was trying to explain that this won't work as
> >> CloudStack can and will undo any such changes.  You will need to add
> >> every network to CloudStack that you want CloudStack-managed VMs to use.
> >>  As I explained earlier you may be required to input the IP addresses in
> >> CloudStack, but that range will not be used if the network offering has
> >> DHCP disabled; thus you can configure the NIC in the VM OS with any
> >> static IP address you want.
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> >>> Hi Kirk,
> >>>
> >>> I think we both are not on the same page, could you please go through
> my
> >>> below emails and let me know is my question is clear to you. if so
> please
> >>> help to configure this scenario.
> >>>
> >>> Thanks in advance.
> >>> AR
> >>>
> >>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
> kirkkosinski@gmail.com>
> >>> wrote:
> >>>
> >>>> Hi, all VM configuration needs to be done in CloudStack, otherwise it
> >>>> will be undone by CloudStack under various common circumstance
> (reboot,
> >>>> stop/start, etc.).
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk
> >>>>>
> >>>>> Thanks for your reply,
> >>>>>
> >>>>> adding to some more points on the same case I want to add additional
> >>>>> physical NIC to VM without mention IPs and service offering from
> >>>> cloudstack
> >>>>> is that possible ?. in my case I have 1 VM which has public NIC
and
> >> need
> >>>>> one more additional physical NIC for internal use. on the WAN side
> >> every
> >>>>> thing is working as expected in the same VM I would need to add
one
> >> more
> >>>>> physical NIC which I need to manually configure IPs in different
> range
> >>>>> apart from the default CIDR.(Eg - connecting to different network
> over
> >>>>> MPLS) meaning one guest VM will have two network one towards to
> public
> >>>> with
> >>>>> default CIDR and other network towards to MPLS on different IP range,
> >> is
> >>>>> that possible if so could you please assist me on this.
> >>>>>
> >>>>> Thanks
> >>>>> AR
> >>>>>
> >>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
> kirkkosinski@gmail.com
> >>>
> >>>>> wrote:
> >>>>>
> >>>>>> Hi, as I said before you may still be required to input an IP
range
> >> when
> >>>>>> creating the network, but it won't be used if DHCP is disabled
for
> the
> >>>>>> network.  So just input any IP range when creating the network
and
> >> then
> >>>>>> configure the desired IP address in the VM.
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>>
> >>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>>>> Hi Kirk
> >>>>>>>
> >>>>>>> Thanks for your response
> >>>>>>> I have tried creating service offering  without dhcp but
while
> >> creating
> >>>>>>> guest network its forcing me to mention IP range. My requirement
> is
> >>>>>> that i
> >>>>>>> will get only 1 IP from each branch network that I have
to
> configure
> >> in
> >>>>>>> guest VM directly. In the branch network switch is created
with
> >>>> multiple
> >>>>>> L2
> >>>>>>> vlans. Please guide me how to setup this network.
> >>>>>>>
> >>>>>>> I hope you have seen my model network diagram which  i have
> uploaded
> >> in
> >>>>>>> google drive.
> >>>>>>>
> >>>>>>> Thx in advance
> >>>>>>> AR.
> >>>>>>>  On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com>
> >> wrote:
> >>>>>>>
> >>>>>>>> Hi, if you don't want DHCP for your branch office network
you need
> >> to
> >>>>>>>> create a Network Offering without DHCP and select that
offering
> when
> >>>>>>>> adding the network in CloudStack.  You may still be
required to
> >> input
> >>>> an
> >>>>>>>> IP range when creating the network, but CloudStack won't
be able
> to
> >>>>>>>> assign the IPs with DHCP disabled.
> >>>>>>>>
> >>>>>>>> Best regards,
> >>>>>>>> Kirk
> >>>>>>>>
> >>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>>>> Hi All,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I am new to Cloudstack I would required your help
to achieve my
> >>>>>> advanced
> >>>>>>>>> networking configuration. right now I am using CS-4.4.0
> management
> >>>>>> server
> >>>>>>>>> with Mysql DB on it. I have 2 computing server with
multiple NICs
> >> to
> >>>>>> test
> >>>>>>>>> my environment. As per the study guide I could able
to test all
> the
> >>>>>>>>> functionality except my topology point view. Basically
I would
> need
> >>>> my
> >>>>>>>>> guest VM to have 2 Physical NICs one towards to
Internet (eth0) &
> >> VM
> >>>> to
> >>>>>>>> VM
> >>>>>>>>> communication and other Physical NIC (eth1) for
my branch office
> >>>>>>>>> connectivity without configuring gateway on the
interface. I will
> >>>>>>>> manually
> >>>>>>>>> add route on the VM. I have tried all the possibility
ways with
> my
> >>>> poor
> >>>>>>>>> knowledge on the CS I could not able to add guest
network without
> >>>>>>>>> mentioning IP range on the UI also cloudmonkey.
 I want to
> >> configure
> >>>>>> IPs
> >>>>>>>> on
> >>>>>>>>> the eth1 nic (Branch network) manually without getting
IPs from
> >> DHCP,
> >>>>>>>> could
> >>>>>>>>> someone please guide me on this.  We are already
running similar
> >>>> setup
> >>>>>> on
> >>>>>>>>> VMware I hope this can be done on cloudstack as
well.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Configuration details.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Management Server / computing server is running
on Ubuntu detail
> >> are
> >>>>>>>> below.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Distributor ID: Ubuntu
> >>>>>>>>>
> >>>>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>>>
> >>>>>>>>> Release: 12.04
> >>>>>>>>>
> >>>>>>>>> Codename: precise
> >>>>>>>>>
> >>>>>>>>> Virtualization is on = KVM
> >>>>>>>>>
> >>>>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I have attached detailed diagram for your better
understanding,
> >>>> please
> >>>>>>>> help
> >>>>>>>>> me to configure my scenario.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Please find this below link for network diagram.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Thanks in Advance.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Abdul Rasool.
> >>>>>>>>>
> >>>>>>>>> +91 98865 18767
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message