cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Kirk Kosinski <kirkkosin...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Fri, 17 Oct 2014 08:42:32 GMT
If you didn't check anything at all when creating the Network Offering
it is probably not configured correctly.  Look at the default shared
Network Offering and create a new offering based on that but without the
things you specifically know you don't want, such as DHCP, DNS, etc..
If you don't know what the setting is then just set it the same as the
default offering.  I believe the error you pasted is occurring because
the offering has Specify IP ranges = no.

Best regards,
Kirk

On 10/16/2014 10:27 PM, Abdul Rasool wrote:
> My Network config details are below.
> 
> 192.168.200.0/24        cloudbr3 --> Management NW
> 192.168.100.0/24        cloudbr0 --> Guest+Public N/W
> 192.168.201.0/24        cloudbr4 --> Storage N/W
> NO IP mention on NIC cloudbr5 --> Guest Additional Network.
> 
> I am trying to use guest additional network offering without using any ACS
> offering like VR, DNS, DHCP, Firewall etc. I have created a new network
> offering called Ex-LAN-NO-Offering while creating this I have not selected
> any of the default offering from the list. at the end I have mention this
> particular interface tags.thatz all.
> 
> In this physical NIC (cloudbr5) doesn’t have any existing network when I
> try configuring new network using Ex-LAN-NO-Offering I am getting this
> error *Network offering with specified id doesn't support adding multiple
> ip ranges*.
> 
> Please help me am I doing any thing wrong here .
> 
> Thanks
> AR
> 
> On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <kirkkosinski@gmail.com>
> wrote:
> 
>> Please provide the complete details of the Network Offering you are
>> trying to use.
>>
>> Best regards,
>> Kirk
>>
>> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
>>> Hi Kirk,
>>>
>>> Thanks for your suggestion,
>>>
>>> I have tried doing the same mentioning some IPs with service offering
>> which
>>> has not selected any of the cloudstack service in the list, & account
>>> specified.  I get this below error Network offering with specified id
>>> doesn't support adding multiple ip ranges
>>>
>>>
>>> This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
>>> physical NIC --> Guest---> Network --> add guest Network.
>>>
>>>
>>> Please guide me why I am not able to add this new network on ACS.
>>>
>>> Regards,
>>> AR
>>>
>>>
>>> On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com>
>>> wrote:
>>>
>>>> Hi, Abdul.  In your previous message you wrote:
>>>>
>>>>> I want to add additional
>>>>> physical NIC to VM without mention IPs and service offering from
>>>>> cloudstack
>>>>
>>>> To me this sounds like you want to make changes directly to a VM at the
>>>> hypervisor level, so I was trying to explain that this won't work as
>>>> CloudStack can and will undo any such changes.  You will need to add
>>>> every network to CloudStack that you want CloudStack-managed VMs to use.
>>>>  As I explained earlier you may be required to input the IP addresses in
>>>> CloudStack, but that range will not be used if the network offering has
>>>> DHCP disabled; thus you can configure the NIC in the VM OS with any
>>>> static IP address you want.
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
>>>>> Hi Kirk,
>>>>>
>>>>> I think we both are not on the same page, could you please go through
>> my
>>>>> below emails and let me know is my question is clear to you. if so
>> please
>>>>> help to configure this scenario.
>>>>>
>>>>> Thanks in advance.
>>>>> AR
>>>>>
>>>>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
>> kirkkosinski@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi, all VM configuration needs to be done in CloudStack, otherwise
it
>>>>>> will be undone by CloudStack under various common circumstance
>> (reboot,
>>>>>> stop/start, etc.).
>>>>>>
>>>>>> Best regards,
>>>>>> Kirk
>>>>>>
>>>>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
>>>>>>> Hi Kirk
>>>>>>>
>>>>>>> Thanks for your reply,
>>>>>>>
>>>>>>> adding to some more points on the same case I want to add additional
>>>>>>> physical NIC to VM without mention IPs and service offering from
>>>>>> cloudstack
>>>>>>> is that possible ?. in my case I have 1 VM which has public NIC
and
>>>> need
>>>>>>> one more additional physical NIC for internal use. on the WAN
side
>>>> every
>>>>>>> thing is working as expected in the same VM I would need to add
one
>>>> more
>>>>>>> physical NIC which I need to manually configure IPs in different
>> range
>>>>>>> apart from the default CIDR.(Eg - connecting to different network
>> over
>>>>>>> MPLS) meaning one guest VM will have two network one towards
to
>> public
>>>>>> with
>>>>>>> default CIDR and other network towards to MPLS on different IP
range,
>>>> is
>>>>>>> that possible if so could you please assist me on this.
>>>>>>>
>>>>>>> Thanks
>>>>>>> AR
>>>>>>>
>>>>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
>> kirkkosinski@gmail.com
>>>>>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi, as I said before you may still be required to input an
IP range
>>>> when
>>>>>>>> creating the network, but it won't be used if DHCP is disabled
for
>> the
>>>>>>>> network.  So just input any IP range when creating the network
and
>>>> then
>>>>>>>> configure the desired IP address in the VM.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Kirk
>>>>>>>>
>>>>>>>>
>>>>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>>>>>>>> Hi Kirk
>>>>>>>>>
>>>>>>>>> Thanks for your response
>>>>>>>>> I have tried creating service offering  without dhcp
but while
>>>> creating
>>>>>>>>> guest network its forcing me to mention IP range. My
requirement
>> is
>>>>>>>> that i
>>>>>>>>> will get only 1 IP from each branch network that I have
to
>> configure
>>>> in
>>>>>>>>> guest VM directly. In the branch network switch is created
with
>>>>>> multiple
>>>>>>>> L2
>>>>>>>>> vlans. Please guide me how to setup this network.
>>>>>>>>>
>>>>>>>>> I hope you have seen my model network diagram which 
i have
>> uploaded
>>>> in
>>>>>>>>> google drive.
>>>>>>>>>
>>>>>>>>> Thx in advance
>>>>>>>>> AR.
>>>>>>>>>  On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com>
>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi, if you don't want DHCP for your branch office
network you need
>>>> to
>>>>>>>>>> create a Network Offering without DHCP and select
that offering
>> when
>>>>>>>>>> adding the network in CloudStack.  You may still
be required to
>>>> input
>>>>>> an
>>>>>>>>>> IP range when creating the network, but CloudStack
won't be able
>> to
>>>>>>>>>> assign the IPs with DHCP disabled.
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>> Kirk
>>>>>>>>>>
>>>>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>>>>>>>> Hi All,
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I am new to Cloudstack I would required your
help to achieve my
>>>>>>>> advanced
>>>>>>>>>>> networking configuration. right now I am using
CS-4.4.0
>> management
>>>>>>>> server
>>>>>>>>>>> with Mysql DB on it. I have 2 computing server
with multiple NICs
>>>> to
>>>>>>>> test
>>>>>>>>>>> my environment. As per the study guide I could
able to test all
>> the
>>>>>>>>>>> functionality except my topology point view.
Basically I would
>> need
>>>>>> my
>>>>>>>>>>> guest VM to have 2 Physical NICs one towards
to Internet (eth0) &
>>>> VM
>>>>>> to
>>>>>>>>>> VM
>>>>>>>>>>> communication and other Physical NIC (eth1) for
my branch office
>>>>>>>>>>> connectivity without configuring gateway on the
interface. I will
>>>>>>>>>> manually
>>>>>>>>>>> add route on the VM. I have tried all the possibility
ways with
>> my
>>>>>> poor
>>>>>>>>>>> knowledge on the CS I could not able to add guest
network without
>>>>>>>>>>> mentioning IP range on the UI also cloudmonkey.
 I want to
>>>> configure
>>>>>>>> IPs
>>>>>>>>>> on
>>>>>>>>>>> the eth1 nic (Branch network) manually without
getting IPs from
>>>> DHCP,
>>>>>>>>>> could
>>>>>>>>>>> someone please guide me on this.  We are already
running similar
>>>>>> setup
>>>>>>>> on
>>>>>>>>>>> VMware I hope this can be done on cloudstack
as well.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Configuration details.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Management Server / computing server is running
on Ubuntu detail
>>>> are
>>>>>>>>>> below.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Distributor ID: Ubuntu
>>>>>>>>>>>
>>>>>>>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>>>>>>>
>>>>>>>>>>> Release: 12.04
>>>>>>>>>>>
>>>>>>>>>>> Codename: precise
>>>>>>>>>>>
>>>>>>>>>>> Virtualization is on = KVM
>>>>>>>>>>>
>>>>>>>>>>> Guest VM OS = Windows -7, CentOS
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I have attached detailed diagram for your better
understanding,
>>>>>> please
>>>>>>>>>> help
>>>>>>>>>>> me to configure my scenario.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Please find this below link for network diagram.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks in Advance.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Abdul Rasool.
>>>>>>>>>>>
>>>>>>>>>>> +91 98865 18767
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
> 


Mime
View raw message