cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Kirk Kosinski <kirkkosin...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Mon, 13 Oct 2014 19:26:02 GMT
Hi, all VM configuration needs to be done in CloudStack, otherwise it
will be undone by CloudStack under various common circumstance (reboot,
stop/start, etc.).

Best regards,
Kirk

On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> Hi Kirk
> 
> Thanks for your reply,
> 
> adding to some more points on the same case I want to add additional
> physical NIC to VM without mention IPs and service offering from cloudstack
> is that possible ?. in my case I have 1 VM which has public NIC and need
> one more additional physical NIC for internal use. on the WAN side every
> thing is working as expected in the same VM I would need to add one more
> physical NIC which I need to manually configure IPs in different range
> apart from the default CIDR.(Eg - connecting to different network over
> MPLS) meaning one guest VM will have two network one towards to public with
> default CIDR and other network towards to MPLS on different IP range, is
> that possible if so could you please assist me on this.
> 
> Thanks
> AR
> 
> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <kirkkosinski@gmail.com>
> wrote:
> 
>> Hi, as I said before you may still be required to input an IP range when
>> creating the network, but it won't be used if DHCP is disabled for the
>> network.  So just input any IP range when creating the network and then
>> configure the desired IP address in the VM.
>>
>> Best regards,
>> Kirk
>>
>>
>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>> Hi Kirk
>>>
>>> Thanks for your response
>>> I have tried creating service offering  without dhcp but while creating
>>> guest network its forcing me to mention IP range. My requirement  is
>> that i
>>> will get only 1 IP from each branch network that I have to configure in
>>> guest VM directly. In the branch network switch is created with multiple
>> L2
>>> vlans. Please guide me how to setup this network.
>>>
>>> I hope you have seen my model network diagram which  i have uploaded in
>>> google drive.
>>>
>>> Thx in advance
>>> AR.
>>>  On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com> wrote:
>>>
>>>> Hi, if you don't want DHCP for your branch office network you need to
>>>> create a Network Offering without DHCP and select that offering when
>>>> adding the network in CloudStack.  You may still be required to input an
>>>> IP range when creating the network, but CloudStack won't be able to
>>>> assign the IPs with DHCP disabled.
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>> Hi All,
>>>>>
>>>>>
>>>>>
>>>>> I am new to Cloudstack I would required your help to achieve my
>> advanced
>>>>> networking configuration. right now I am using CS-4.4.0 management
>> server
>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs to
>> test
>>>>> my environment. As per the study guide I could able to test all the
>>>>> functionality except my topology point view. Basically I would need my
>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) &
VM to
>>>> VM
>>>>> communication and other Physical NIC (eth1) for my branch office
>>>>> connectivity without configuring gateway on the interface. I will
>>>> manually
>>>>> add route on the VM. I have tried all the possibility ways with my poor
>>>>> knowledge on the CS I could not able to add guest network without
>>>>> mentioning IP range on the UI also cloudmonkey.  I want to configure
>> IPs
>>>> on
>>>>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
>>>> could
>>>>> someone please guide me on this.  We are already running similar setup
>> on
>>>>> VMware I hope this can be done on cloudstack as well.
>>>>>
>>>>>
>>>>>
>>>>> Configuration details.
>>>>>
>>>>>
>>>>>
>>>>> Management Server / computing server is running on Ubuntu detail are
>>>> below.
>>>>>
>>>>>
>>>>>
>>>>> Distributor ID: Ubuntu
>>>>>
>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>
>>>>> Release: 12.04
>>>>>
>>>>> Codename: precise
>>>>>
>>>>> Virtualization is on = KVM
>>>>>
>>>>> Guest VM OS = Windows -7, CentOS
>>>>>
>>>>>
>>>>>
>>>>> I have attached detailed diagram for your better understanding, please
>>>> help
>>>>> me to configure my scenario.
>>>>>
>>>>>
>>>>> Please find this below link for network diagram.
>>>>>
>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>
>>>>>
>>>>>
>>>>> Thanks in Advance.
>>>>>
>>>>>
>>>>>
>>>>> Abdul Rasool.
>>>>>
>>>>> +91 98865 18767
>>>>>
>>>>
>>>
>>
> 

Mime
View raw message