cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Erik Weber <terbol...@gmail.com>
Subject Re: Adding an ISO image
Date Sun, 15 Dec 2013 19:33:13 GMT
What does your management server log say? Or the ssvm log if the ms log is
clean?

Regards,
Erik Weber
15. des. 2013 20:29 skrev "Ron Gage" <ron@rongage.org> følgende:

> I have added a CIDR list of "10.0.0.0/8,192.168.0.0/24" to the
> secstorage.allowed.internal.sites parameter and restarted the management
> server.  I can wget from the storage server to the management server
> (management server is 10.0.0.10 and 192.168.0.190, secondary NAS is
> 192.168.0.220).  I have tried to pull the ISO from the secondary storage
> into Cloudstack and from the management server itself (installed httpd on
> the management server just for this).  It all works independently but not
> in unison.  The "register ISO" screen goes through the motions all right,
> but then silently fails.
>
> Ron
>
>
> On 12/15/2013 1:04 PM, Ahmad Emneina wrote:
>
>> I'd try to do a simple wget from, say, your management server box. if that
>> succeeds, you'll need to modify a global setting on your management server
>> to allow for downloading from a private address space
>> (secstorage.allowed.internal.sites).
>>
>>
>> On Sun, Dec 15, 2013 at 9:59 AM, Ron Gage <ron@rongage.org> wrote:
>>
>>  Hi!
>>>
>>> I am trying to add an ISO image to my test environment and it appears to
>>> not be going too well.
>>>
>>> I went through the "Register ISO" process in the templates section under
>>> the ISO view.  No errors came back, the notification came through at the
>>> top, and the ISO I registered showed up in the list of ISOs.  When I
>>> refreshed the ISO page view, the just-registered ISO disappeared.
>>>
>>> Looking at my secondary storage does not show anything getting copied
>>> over
>>> to it at all (the free disk space is staying constant). The ISO location
>>> is
>>> a secondary NFS server where I have WebDAV enabled and no credentials
>>> required for access.
>>>
>>> Any idea what I could be doing wrong?
>>>
>>> Ron
>>>
>>>
>>>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message