cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Steven Liang <stevenli...@yesup.com>
Subject Re: How to add new IPs on CS 4.2 (Basic Networking)?
Date Wed, 18 Dec 2013 15:15:02 GMT
Hi Chiradeep,

Thank you very much.
My problem has been solved. The reason is the space of my temp primary
storage had not enough.
After I added a new primary storage, the new ips was able to be assigned.
Thank you for your teaching me using Cloudmonkey.

Regards,
Steven



On 12/17/2013 04:45 PM, Chiradeep Vittal wrote:
> Cloudmonkey is very user friendly. Just <tab> if you don't know the
> parameters
> > list pods
> count = 1
> pod:
> name = POD0
> id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
> allocationstate = Enabled
> endip = 172.16.15.200
> gateway = 172.16.15.1
> netmask = 255.255.255.0
> startip = 172.16.15.2
> zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
> zonename = Sandbox-simulator
>
> > update pod 
> allocationstate=  endip=            gateway=          id=            
>   name=             netmask=          startip=        
> > update pod startip=172.16.15.2 endip=172.16.15.202
> netmask=255.255.255.0 gateway=172.16.15.1
> id=83f13f18-7fa6-422b-be35-ecb8f4d75a9f
> pod:
> name = POD0
> id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
> allocationstate = Enabled
> endip = 172.16.15.202
> gateway = 172.16.15.1
> netmask = 255.255.255.0
> startip = 172.16.15.2
> zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
> zonename = Sandbox-simulator
>
>
> From: Steven Liang <stevenliang@yesup.com <mailto:stevenliang@yesup.com>>
> Reply-To: "users@cloudstack.apache.org
> <mailto:users@cloudstack.apache.org>" <users@cloudstack.apache.org
> <mailto:users@cloudstack.apache.org>>
> Date: Tuesday, December 17, 2013 12:24 PM
> To: "users@cloudstack.apache.org <mailto:users@cloudstack.apache.org>"
> <users@cloudstack.apache.org <mailto:users@cloudstack.apache.org>>
> Subject: Re: How to add new IPs on CS 4.2 (Basic Networking)?
>
> Thank you, Chiradeep.
> I am not very familiar with cloudmonkey. Most time I just uses it for
> "list".
> Could you give me a example 'update pod'?
> Thank you.
> The following is the list of my two pods.
> +--------------+------+--------------+-----------------+--------------------------------------+---------------+--------------------------------------+------------+----------+
> |    endip     | name |   startip    | allocationstate
> |                zoneid                |    netmask   
> |                  id                  |  gateway   | zonename |
> +--------------+------+--------------+-----------------+--------------------------------------+---------------+--------------------------------------+------------+----------+
> | 172.16.1.250 | pod1 | 172.16.1.230 |     Enabled     |
> eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
> 14de769a-16d6-4b4b-b4cd-6f088c5e1654 | 172.16.1.1 | zone1 |
> | 172.16.2.250 | pod2 | 172.16.2.230 |     Enabled     |
> eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
> cd558724-6a77-40fa-8df8-acd82f12911f | 172.16.2.1 | zone1 |
> +--------------+------+--------------+-----------------+--------------------------------------+---------------+--------------------------------------+------------+----------+
>
>
>
> On 12/16/2013 07:19 PM, Chiradeep Vittal wrote:
>> Steven, I assume you want to add ip addresses that are available to VMs.
>> I am also assuming that the IP for VMs is drawn from the pod ip range. In
>> that case, you can use the 'update pod' api with cloudmonkey.
>>
>> On 12/16/13 1:44 PM, "Steven Liang" <stevenliang@yesup.com> wrote:
>>
>>> Hi James,
>>>
>>> Thank you anyway.
>>> But I don't understand what Mr. Chiradeep said.
>>> I listed my pods using cloudmonkey, the two pods have the same netmask
>>> and gateway(management ips).
>>> What should I update? Please help me.
>>> Thank you.
>>>
>>> Steven
>>>
>>>
>>>
>>> On 12/16/2013 04:35 PM, ogiljae wrote:
>>>> Hi,
>>>>
>>>> Sorry about confusing.
>>>> The way I wrote is for advanced network not basic zone.
>>>> I believe that you should stick to Mr. Chiradeep's guide.
>>>>
>>>> James.
>>>>
>>>>
>>>> On 12/17/13, 6:29 AM, Steven Liang wrote:
>>>>> Hi Giljae,
>>>>>
>>>>> I can not read your picture, can you send me again?
>>>>> BTW, I didn't set any vlans, you mean I must set vlan?
>>>>> Thank you.
>>>>>
>>>>> Steven
>>>>>
>>>>> On 12/16/2013 04:24 PM, giljae o wrote:
>>>>>> Hi,
>>>>>>
>>>>>> You can add additional public ip addresses with the new vlan or
>>>>>> existing vlan on UI below.
>>>>>>
>>>>>> Inline image 1
>>>>>>
>>>>>>
>>>>>> On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang<stevenliang@yesup.com<mailto:stevenliang@yesup.com>>
 wrote:
>>>>>>
>>>>>>      Hi Chiradeep,
>>>>>>
>>>>>>      Thank you for updating.
>>>>>>      I haven't tried. Can I use cloudmonkey? I've installed
>>>>>>      cloudmonkey, just
>>>>>>      used for "list".
>>>>>>
>>>>>>      Steven
>>>>>>
>>>>>>
>>>>>>      On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
>>>>>>      >  Have you tried expanding your pod with
>>>>>>      >
>>>>>>     
>>>>>>
>>>>>> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.
>>>>>> html
>>>>>>      >
>>>>>>      >  On 12/16/13 7:22 AM, "Steven Liang"<stevenliang@yesup.com
>>>>>>      <mailto:stevenliang@yesup.com>>  wrote:
>>>>>>      >
>>>>>>      >>  Hi All,
>>>>>>      >>
>>>>>>      >>  I have a question. If I would use up my existing public
>>>>>> IPs(for
>>>>>>      example:
>>>>>>      >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24)
to my
>>>>>>      new pod?
>>>>>>      >>  Thank you.
>>>>>>      >>
>>>>>>      >>  Steven
>>>>>>
>>>>>>
>>>>>>
>
>
> -- 
> *Steven Liang*
> *Linux System Admin*
> *Phone*: 1.416.499.8009 ext. 2865
> *Cell Phone*: 1.647.718.5292
> *Email*: stevenliang@yesup.com <mailto:stevenliang@yesup.com>
> www.yesup.com <http://www.yesup.com> | account.yesup.com
> <http://account.yesup.com>
>
> Yesup


-- 
*Steven Liang*
*Linux System Admin*
*Phone*: 1.416.499.8009 ext. 2865
*Cell Phone*: 1.647.718.5292
*Email*: stevenliang@yesup.com <mailto:stevenliang@yesup.com>
www.yesup.com <http://www.yesup.com> | account.yesup.com
<http://account.yesup.com>

Yesup

Mime
View raw message