cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Marty Sweet <msweet....@gmail.com>
Subject Re: Help needed for ip setup
Date Tue, 05 Nov 2013 12:04:11 GMT
Hi Mario,

Are you tagging VLANS to this host?
If so, is the switch connected to a Layer 3 switch, which you can then
configure as a router to route the traffic from your cloud VLANS to your
local working network.

Vlan bridges are added when network/vms are created.

I hope that makes sense,

Marty


On Tue, Nov 5, 2013 at 7:00 AM, Mario Giammarco <mgiammarco@gmail.com>wrote:

> Marty Sweet <msweet.dev@...> writes:
>
> >
> > Ok, is that IP a gateway? It would need to be able to route traffic.
> > If you haven't specified VLANS then VLANS will not be used (as far as I'm
> > aware), and it will just use the interfaces of your server. Example:
> > bridging eth0 for VM traffic
> >
> First I repeat the configuration because I have written in another thread:
>
> - only one  ubuntu server that is host AND manager (test lab...);
> - followed official guide so:
> -- three vlan (100,200,300);
> -- first vlan with ip 10.1.0.13 for management of server;
> -- cloudbr0 and cloudbr1 vlans without ip.
>
> Now I see that after installation of manager and agent many bridges and/or
> vlan are present not added by me.
>
> But I do not understand why it is not working, expecially what I should
> provide on each vlan and what is already provided by cloudstack.
>
> Thanks,
> Mario
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message