cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From motty cruz <motty.c...@gmail.com>
Subject Re: CS 4.2 System VMs not starting
Date Sat, 19 Oct 2013 17:59:00 GMT
Thanks for you support on this matter! it is of a streamly importance. I
can't VNC into the macine, I get the error "no route to hosts"

yes the zone is enable!

I personally don't think it has to do with VLANs because management traffic
does not have VLANs but I could be wrong, also I disabled iptables and
selinux but not able to resolve this issue.




On Sat, Oct 19, 2013 at 10:08 AM, raj kumar <rajkumar600003@gmail.com>wrote:

> Can you check whether zone is enabled? if not enabled it.
>
>
> On Sat, Oct 19, 2013 at 9:34 PM, Erdősi Péter <fazy@niif.hu> wrote:
>
> > Hy,
> >
> > Can you try to vnc to sysvm machine?
> > root/password should be work, if you use the default sysvm template.
> >
> >
> > Peter
> >
> > 2013.10.19. 17:33 keltezéssel, motty cruz írta:
> >
> >  thank you;
> >> I found the file :
> >> [root@kvm1 .ssh]# ls
> >> id_rsa.cloud  id_rsa.pub.cloud  known_hosts
> >> [root@kvm1 .ssh]#
> >>
> >>
> >> [root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922
> >> 169.254.2.56
> >> ssh: connect to host 169.254.2.56 port 3922: No route to host
> >> [root@kvm1 network-scripts]#
> >>
> >>
> >> I get no route to host, I'm running out of ideas. please help
> >>
> >>
> >>
> >> On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi <
> >> jayapalreddy.uradi@citrix.com> wrote:
> >>
> >>  Hi,
> >>>
> >>> use the key file at /root/.ssh/id_rsa.cloud
> >>> If it not found, locate key file
> >>>
> >>>
> >>> Thanks,
> >>> Jayapal
> >>>
> >>> On 18-Oct-2013, at 2:41 AM, motty cruz <motty.cruz@gmail.com> wrote:
> >>>
> >>>  Thanks Peter,
> >>>> I tried the command you suggested,
> >>>>
> >>>> [root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922
> >>>>
> >>> 169.254.3.53
> >>>
> >>>> Warning: Identity file .ssh/id_rsa.cloud not accessible: No such file
> or
> >>>> directory.
> >>>> ssh: connect to host 169.254.3.53 port 3922: No route to host
> >>>> [root@kvm1 network-scripts]#
> >>>>
> >>>> do you mind providing  the config file of your vlans? I believe VLANs
> >>>> are
> >>>> not configure properly
> >>>> here is my management/storage bridge
> >>>> less ifcfg-eth1:
> >>>>
> >>>> DEVICE=eth1
> >>>> HWADDR=00:25:90:88:51:5D
> >>>> ONBOOT=yes
> >>>> BRIDGE=cloudbr1
> >>>> [root@kvm1 network-scripts]#
> >>>>
> >>>> less ifcfg-cloudbr1:
> >>>> DEVICE=cloudbr1
> >>>> ONBOOT=yes
> >>>> TYPE=Bridge
> >>>> IPADDR=10.107.0.7
> >>>> NETMASK=255.255.255.0
> >>>> DNS1=8.8.8.8
> >>>> DNS2=10.0.10.0
> >>>>
> >>>> Thank you for your support!
> >>>>
> >>>>
> >>>> On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <fazy@niif.hu>
wrote:
> >>>>
> >>>>  Hello!
> >>>>>
> >>>>> I stucked something like this in Xen.
> >>>>> The problem was the networks (and vlans) on sysvm.
> >>>>> Can you ssh it (in xen,  ssh -i .ssh/id_rsa.cloud -p 3922 169.254.X.Y
> >>>>> from the xen host machine, which own the guest), and check the
> network
> >>>>> avaibility of the system vm?
> >>>>>
> >>>>> Best regards,
> >>>>> Peter
> >>>>>
> >>>>>
> >>>>> 2013.10.17. 22:31 keltezéssel, motty cruz írta:
> >>>>>
> >>>>> Hello, install Cloudstack 4.2 with KVM hypervisors, Console Proxy
MV
> >>>>>
> >>>>>> started but I am not able to ping the private or public IP,
second
> VM
> >>>>>> won't
> >>>>>> start. When I ran the command
> >>>>>> [root@kvm1 network-scripts]# virsh list
> >>>>>>   Id    Name                           State
> >>>>>> ------------------------------****----------------------
> >>>>>>   2     v-2-VM                         running
> >>>>>>   4     s-3-VM                         running
> >>>>>>
> >>>>>> [root@kvm1 network-scripts]#
> >>>>>>
> >>>>>> I see both VMs running; I configured zone with advance network,
> >>>>>> guest/public network on eth0, management/storage on eth1
> >>>>>>
> >>>>>> any ideas or suggestions?
> >>>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>>
> >>>>>>
> >>>
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message