cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From motty cruz <motty.c...@gmail.com>
Subject Re: CS 4.2 System VMs not starting
Date Sat, 19 Oct 2013 18:58:02 GMT
management traffic is an separate interface eth1 bridge to cloudbr1,
public traffic and guest on eth0 bridge to cloudbr0

I can't ping public ip, private(management) or local lik

Public IP Address 98.234.34.208
Private IP Address 10.107.0.89
Link Local IP Address 169.254.1.180

both system VMs are running, I can't go past this? any ideas? or
suggestions?

Thanks




On Sat, Oct 19, 2013 at 10:59 AM, motty cruz <motty.cruz@gmail.com> wrote:

> Thanks for you support on this matter! it is of a streamly importance. I
> can't VNC into the macine, I get the error "no route to hosts"
>
> yes the zone is enable!
>
> I personally don't think it has to do with VLANs because management
> traffic does not have VLANs but I could be wrong, also I disabled iptables
> and selinux but not able to resolve this issue.
>
>
>
>
> On Sat, Oct 19, 2013 at 10:08 AM, raj kumar <rajkumar600003@gmail.com>wrote:
>
>> Can you check whether zone is enabled? if not enabled it.
>>
>>
>> On Sat, Oct 19, 2013 at 9:34 PM, Erdősi Péter <fazy@niif.hu> wrote:
>>
>> > Hy,
>> >
>> > Can you try to vnc to sysvm machine?
>> > root/password should be work, if you use the default sysvm template.
>> >
>> >
>> > Peter
>> >
>> > 2013.10.19. 17:33 keltezéssel, motty cruz írta:
>> >
>> >  thank you;
>> >> I found the file :
>> >> [root@kvm1 .ssh]# ls
>> >> id_rsa.cloud  id_rsa.pub.cloud  known_hosts
>> >> [root@kvm1 .ssh]#
>> >>
>> >>
>> >> [root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922
>> >> 169.254.2.56
>> >> ssh: connect to host 169.254.2.56 port 3922: No route to host
>> >> [root@kvm1 network-scripts]#
>> >>
>> >>
>> >> I get no route to host, I'm running out of ideas. please help
>> >>
>> >>
>> >>
>> >> On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi <
>> >> jayapalreddy.uradi@citrix.com> wrote:
>> >>
>> >>  Hi,
>> >>>
>> >>> use the key file at /root/.ssh/id_rsa.cloud
>> >>> If it not found, locate key file
>> >>>
>> >>>
>> >>> Thanks,
>> >>> Jayapal
>> >>>
>> >>> On 18-Oct-2013, at 2:41 AM, motty cruz <motty.cruz@gmail.com>
wrote:
>> >>>
>> >>>  Thanks Peter,
>> >>>> I tried the command you suggested,
>> >>>>
>> >>>> [root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922
>> >>>>
>> >>> 169.254.3.53
>> >>>
>> >>>> Warning: Identity file .ssh/id_rsa.cloud not accessible: No such
>> file or
>> >>>> directory.
>> >>>> ssh: connect to host 169.254.3.53 port 3922: No route to host
>> >>>> [root@kvm1 network-scripts]#
>> >>>>
>> >>>> do you mind providing  the config file of your vlans? I believe
VLANs
>> >>>> are
>> >>>> not configure properly
>> >>>> here is my management/storage bridge
>> >>>> less ifcfg-eth1:
>> >>>>
>> >>>> DEVICE=eth1
>> >>>> HWADDR=00:25:90:88:51:5D
>> >>>> ONBOOT=yes
>> >>>> BRIDGE=cloudbr1
>> >>>> [root@kvm1 network-scripts]#
>> >>>>
>> >>>> less ifcfg-cloudbr1:
>> >>>> DEVICE=cloudbr1
>> >>>> ONBOOT=yes
>> >>>> TYPE=Bridge
>> >>>> IPADDR=10.107.0.7
>> >>>> NETMASK=255.255.255.0
>> >>>> DNS1=8.8.8.8
>> >>>> DNS2=10.0.10.0
>> >>>>
>> >>>> Thank you for your support!
>> >>>>
>> >>>>
>> >>>> On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <fazy@niif.hu>
wrote:
>> >>>>
>> >>>>  Hello!
>> >>>>>
>> >>>>> I stucked something like this in Xen.
>> >>>>> The problem was the networks (and vlans) on sysvm.
>> >>>>> Can you ssh it (in xen,  ssh -i .ssh/id_rsa.cloud -p 3922
>> 169.254.X.Y
>> >>>>> from the xen host machine, which own the guest), and check the
>> network
>> >>>>> avaibility of the system vm?
>> >>>>>
>> >>>>> Best regards,
>> >>>>> Peter
>> >>>>>
>> >>>>>
>> >>>>> 2013.10.17. 22:31 keltezéssel, motty cruz írta:
>> >>>>>
>> >>>>> Hello, install Cloudstack 4.2 with KVM hypervisors, Console
Proxy MV
>> >>>>>
>> >>>>>> started but I am not able to ping the private or public
IP, second
>> VM
>> >>>>>> won't
>> >>>>>> start. When I ran the command
>> >>>>>> [root@kvm1 network-scripts]# virsh list
>> >>>>>>   Id    Name                           State
>> >>>>>> ------------------------------****----------------------
>> >>>>>>   2     v-2-VM                         running
>> >>>>>>   4     s-3-VM                         running
>> >>>>>>
>> >>>>>> [root@kvm1 network-scripts]#
>> >>>>>>
>> >>>>>> I see both VMs running; I configured zone with advance network,
>> >>>>>> guest/public network on eth0, management/storage on eth1
>> >>>>>>
>> >>>>>> any ideas or suggestions?
>> >>>>>>
>> >>>>>> Thanks,
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>
>> >
>>
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message