cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Yugandhar Yetham <yugandhar.yet...@gmail.com>
Subject Re: ssvm fails to start, [BOOTLOADER_FAILED, OpaqueRef:..., Unable to find partition containing kernel
Date Thu, 24 Oct 2013 15:45:11 GMT
Hi,

As per you given the info,

Your secondary storage is "/export/secondary, But you have downloaded the
template into /mnt/secondary. Please check the below command and reply it.

You reran command is :

# cloud-install-sys-tmplt -m* /mnt/secondary* -u
http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2-h
xenserver -F

Please run this below command instead of above

cloud-install-sys-tmplt -m */export/secondary* -u
http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2-h
xenserver -F


----
Thanks,
Yugnadhar Yetham




On Thu, Oct 24, 2013 at 9:00 PM, Lisa B. <nordlicht1984@hotmail.de> wrote:

> Hey!
>
> I have installed XenServer 6.2 and Cloudstack 4.2.
> Added local primary storage via CS UI
> Added NFS secondary storage "/export/secondary" via CS UI
> Added NFS secondary storage "/export/secondary" via XenCenter to the host
> (to check the connectivity between hypervisor host and management server
> (also NFS server))
>
> I followed the instructions on how to download and install the system vm
> template via command line.The UI shows the system vm template as downloaded
> and ready.
>
> The automatically added "CentOS 5.6(64-bit) no GUI (XenServer)" is "ready:
> no" and its state field is empty.
> A manually added ISO from a local webserver is also "ready: no" and has an
> empty state field.
>
> I also added the NFS /export/secondary directory as NFS secondary storage
> staging. Is that correct? I got confused whether the staging is necessary
> or not.(?)
>
> The SSVM tries to start about every 2 minutes (CS UI shows both SSVM and
> CPVM in either starting or stopped state). In XenCenter I am observing that
> the VM gets started for two seconds and is powered down immediately.
> In XenCenter I can see Virtual disks "Template routing-1" and "ROOT-2601"
> in <local primary storage uuid of host>.
> When the SSVM tries to start, XenCenter shows v-2601-VM as the connected
> VM for ROOT-2601 for 2 seconds. The ROOT-2601 remains on the host, but the
> VM shuts down immediately. v-2601-VM will start once more, connect to the
> ROOT-2601 volume and immediately shut down again. After the second attempt
> the ROOT-2601 will be deleted and on the next try the instance id will
> increase by 1 (2602).
>
> The Xenserver error log points to a problem with the pygrub bootloader.
> [BOOTLOADER_FAILED, OpaqueRef:f7ae32b4-a32a-6278-7ecb-9904bbd20875, Unable
> to find partition containing kernel
> (starting from line 132 in the attached logfile)
>
> I mounted nfs:/export/secondary/template/tmpl/1/1 to /tmp/secondary on the
> xenserver host but that didn't make any difference.
>
> I also reran the systemvm template command
> cloud-install-sys-tmplt -m /mnt/secondary -u
> http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2-h xenserver
-F
> Is it still the correct URL for CS 4.2? It was successfully installed once
> again as it was during installation.
>
> Now where should I investigate more? I assume the SSVM has to start first
> and then download the templates so I should fix the SSVM issue first. But
> how?
>
> You can find the variables passed to the SSVM and my network details below.
>
> Thanks in advance!
> Lisa
>
> variables passed to ssvm on startup
>
> -- quiet console=hvc0%
> template=domP%
> type=secstorage%
> host=192.168.2.50%
> port=8250%
> name=s-2601-VM%
> zone=1%
> pod=1%
> guid=s-2601-VM%
>
> resource=org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource%
> instance=SecStorage%
> sslcopy=true%
> role=templateProcessor%
> mtu=1500%
> eth2ip=192.168.2.151%
> eth2mask=255.255.255.0%
> gateway=192.168.2.1%
> eth0ip=169.254.3.153%
> eth0mask=255.255.0.0%
> eth1ip=192.168.2.68%
> eth1mask=255.255.255.0%
> mgmtcidr=192.168.2.0/24%
> localgw=192.168.2.1%
> private.network.device=eth1%
> eth3ip=192.168.2.69%
> eth3mask=255.255.255.0%
> storageip=192.168.2.69%
> storagenetmask=255.255.255.0%
> storagegateway=192.168.2.1%
> internaldns1=192.168.2.1%
> dns1=192.168.2.1
>
> (basic) network setup:
> #zone
> #       name: cloudstack1
> #       externer dns: 192.168.2.1
> #       interner dns: 192.168.2.1
> #pod
> #       name: cloudstack1-pod1
> #       gateway: 192.168.2.1
> #       netzmaske: 255.255.255.0
> #       ip-range: 192.168.2.51 - 192.168.2.90
> #add guest network (cloudstack1-pod1> ip allocations)
> #       schnittstelle: 192.168.2.1
> #       netzmaske: 255.255.255.0
> #       ip range: 192.168.2.151 - 192.168.2.190
> #host hinzuf├╝gen
> #       host name: 192.168.2.98

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message