cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Chris Sears <chris.x.se...@sungard.com>
Subject Re: Blue screen appear if using the template uploaded
Date Tue, 05 Feb 2013 17:03:50 GMT
Hi Fabrice,

I'm not aware of any such feature, but there have been other
situations where people have needed ways to customize the virtual
hardware or VMX file gat CloudStack creates, so it might be an
improvement worth exploring.

In your case, I'm curious why you would need/prefer LSI Logic SAS over
LSI Logic Parallel. I've found the performance to be roughly identical
and I've found it easier to do guest-level automation with the LSI
Parallel controller (due to how disks are detected).

Thanks,

 - Chris

On Tue, Feb 5, 2013 at 11:49 AM, Fabrice Brazier
<fabrice.brazier@apalia.net> wrote:
> Hi Kirk,
>
> Do you know if a new feature to change the disk controller used by the
> guest VM will be available in CloudStack soon ? e.g (for VMware): LSI
> Logic SAS Controller instead of LSI Logic Parallel
>
> Thanks,
> Fabrice
>
> -----Original Message-----
> From: Kirk Kosinski [mailto:kirkkosinski@gmail.com]
> Sent: 2013年2月1日 15:12
> To: cloudstack-users@incubator.apache.org
> Subject: Re: Blue screen appear if using the template uploaded
>
> Hi, Xintao.  What disk controller did you configure on your uploaded
> template?  CloudStack only uses lsilogic and will ignore any special
> configuration in the OVF of an uploaded OVA template, so make sure that
> any VMs to be imported to CloudStack use the lsilogic disk controller.
>
> This should be simple if you are creating the template yourself, but might
> be a problem if you are using a virtual appliance from a vendor.
> I saw someone recently who wanted to use a Juniper virtual appliance, but
> it was configured with the buslogic controller for some reason and
> wouldn't boot when deployed via CloudStack with lsilogic.  In that case
> Juniper built a new version that used lsilogic, but some vendors might not
> be so helpful.
>
> Another possible problem would be if the uploaded template includes
> multiple VMDKs and needs them all to boot.  CloudStack doesn't support
> OVAs with multiple VMDKs (or with ISOs) and it will only use one VMDK from
> the OVA.
>
> I'm not sure what else would cause the BSOD you're seeing.  If the above
> doesn't help, share a screen shot of the BSOD or at least the error code
> since it may help narrow down the problem.
>
> Kirk
>
> On 01/31/2013 07:02 PM, Xintao Song wrote:
>> Hello,
>>
>>
>> I had some trouble to create instance by template. But I could not know
> how to solve it.
>>
>>
>>
>> Problems as below:
>>
>> I uploaded OVA template to cloudstack, and then create instance by this
> template, but the bluescreen appears when the instance start.
>>
>> I am sure this template uploaded is well. But I did not know why the
> bluescreen appeared by using this template uploaded to create instance on
> cloudstack.
>> If I used ISO to create instance and convert it to template, and then
> create instance again by this template, it is very well.
>>
>> My environment:
>> Cloudstack4.0+Vcenter5+Esxi5
>>
>> Regards,
>> Xintao Song
>>
>

Mime
View raw message