cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Matt Hohman <mhoh...@newheights.org>
Subject Help with advanced zone kvm networking setup.
Date Mon, 21 Jan 2013 03:44:59 GMT
Hey All,

I'm looking for some advice on setting up our advanced zone for our small private cloud. Here
is a rundown of how we are trying to get this going.

5 KVM Ubuntu 12.03 Hypervisors with 2 nics each

on eth0

management network is untagged 10.0.220.0/24
vlan 3001 tagged storage 10.0.221.0/24

on eth1
vlan 101 tagged Public 107.xxx.xxx.0/24
vlan 3100 - 3199 tagged Guest 10.0.223.0/24

KVM Hots are on:
10.0.220.101 mngt 10.0.221.101 storage
10.0.220.102 mngt 10.0.221.102 storage
10.0.220.103 mngt 10.0.221.103 storage
10.0.220.104 mngt 10.0.221.104 storage
10.0.220.105 mngt 10.0.221.105 storage

Cloudstack 4.0 is installed on Ubuntu 12.04 on ip 10.0.220.2
NFS is 10.0.221.200

Does this network scheme work well for cloudstack? Is there something that should be changed?

I'm a little confused on how to set this setup properly in /etc/network/interfaces. Do I need
to manually define all 100 guest vlans? How do I setup the guest bridge?

When I'm adding the zone to cloudstack what should my network labels be and do I assign these
in the /etc/network/interfaces file?

Here is my attempt at /etc/network/interfaces for host1

### /etc/network/interfaces
auto lo
iface lo inet loopback

# Hypervisor Management
auto eth0
iface eth0 inet static
    address 10.0.220.101
    netmask 255.255.255.0
    gateway 10.0.220.1
    dns-nameservers 8.8.8.8 8.8.4.4

#cloud-store storage network
auto eth0.3001
iface eth0.3001 inet static
    address 10.0.221.101
    netmask 255.255.255.0


# Public network
auto cloudbr0
iface cloudbr0 inet manual
    bridge_ports eth1.101
    bridge_fd 5
    bridge_stp off
    bridge_maxwait 1
### EOF

Any help would be greatly appreciated!

Thanks,
Matt Hohman
Technical Ministries
New Heights Church
Mime
View raw message