cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Charles Moulliard <ch0...@gmail.com>
Subject Re: CloudStack running in Virtualbox
Date Wed, 24 Oct 2012 16:30:58 GMT
I do not re initialize the mac address

On Wed, Oct 24, 2012 at 6:14 PM, Edison Su <Edison.su@citrix.com> wrote:

> When you import devcloud image into virtualbox, please do NOT select
> "re-initialize the MAC address of all network cards"
> I'll add it on the document.
>
> > -----Original Message-----
> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> > Sent: Wednesday, October 24, 2012 6:29 AM
> > To: cloudstack-users@incubator.apache.org
> > Subject: Re: CloudStack running in Virtualbox
> >
> > Hi Rohit,
> >
> > I have followed instructions here ((
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup)
> > but I cannot ping the DevCloud VM machine at this address 192.168.56.2
> > from
> > the machine where VB is running.
> >
> > Host = LinuxMint running VirtualBox
> >
> > ping 192.168.56.2
> > PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> > From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> >
> >  ifconfig
> > eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
> >           inet addr:192.168.1.5  Bcast:192.168.1.255
> > Mask:255.255.255.0
> >           inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
> >           Interrupt:20 Memory:e9600000-e9620000
> >
> > vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
> >           inet addr:192.168.56.1  Bcast:192.168.56.255
> > Mask:255.255.255.0
> >           inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> >
> > Guest = DevCloud VM
> >
> > After logging using root / password
> >
> > ifconfig -->
> > xenbr0 = 192.168.56.2/255.255.255.0
> > eth0 is not configured
> > eth1 has a MAC address but no IP address
> > xenbr1 has a MAC address but no IP address
> >
> > So something is missing in the config presented at the link ?
> >
> > Regards,
> >
> > Charles
> >
> > On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch007m@gmail.com>
> > wrote:
> >
> > > Hi Rohit,
> > >
> > > Thx for the update.
> > > Additional questions :
> > > - If the machine containing the VB is linked by example to the
> > following
> > > network 192.168.1.x/255.255.255.0 and has access to internet using a
> > DHCP
> > > server, do you think that the network to be used for the host only
> > adapter
> > > should be 192.168.56.x as defined here (
> > >
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup)
> > > ?
> > > - How will it be possible for the DevCloud VM machine to have access
> > to
> > > internet if we use only between VB and cloud machine the host only
> > adapter
> > > and not NAT or Bridge adapter as second adapter ?
> > >
> > > There is a missing piece in the wiki page : You should tell to the
> > user
> > > how it should configure the vboxnet0 adapter in VB that we will use
> > with
> > > the host only adapter ! The existing page explains only how to
> > configure
> > > the DevCloud VM (/etc/hosts file)
> > >
> > > Regards,
> > >
> > > Charles
> > >
> > >
> > > On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav
> > <rohit.yadav@citrix.com>wrote:
> > >
> > >> I think the bridge mode may not be a good idea, as it may pollute
> > your
> > >> LAN.
> > >> I suggest you try the host-only adapter:
> > >>
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup
> > >>
> > >> Note: this for the latest asf master where we use maven and ant is
> > only
> > >> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you
> > setup the
> > >> network in devcloud for host-only adapter).
> > >>
> > >> Regards.
> > >> ________________________________________
> > >> From: Charles Moulliard [ch007m@gmail.com]
> > >> Sent: Wednesday, October 24, 2012 4:34 PM
> > >> To: cloudstack-users@incubator.apache.org
> > >> Subject: Re: CloudStack running in Virtualbox
> > >>
> > >> Damned. By changing the network adapter from NAT to bridge adapter
> > in VB,
> > >> I
> > >> cannot anymore connect to the management server from the browser
> > running
> > >> in
> > >> the host machine (= ubuntu machine) using localhost or 192.168.1.3
> > or
> > >> 10.0.2.15 followed by 8080/client
> > >>
> > >> ssh works well from ubuntu to the VB image (CloudStack) like you can
> > see
> > >> hereafter
> > >>
> > >> ssh root@192.168.1.3
> > >> root@192.168.1.3's password:
> > >> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
> > >>
> > >>  * Documentation:  https://help.ubuntu.com/
> > >>
> > >>   System information as of Wed Oct 24 04:01:34 PDT 2012
> > >>
> > >>   System load:  0.07              Processes:             112
> > >>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
> > >>   Memory usage: 22%               IP address for eth0:   192.168.1.3
> > >>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
> > >>
> > >>
> > >> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard
> > <ch007m@gmail.com
> > >> >wrote:
> > >>
> > >> > I will change from NAT to bridge adapter.
> > >> > DHCP is configured on the DSL router (= LAN where the machine is
> > >> plugged)
> > >> >
> > >> >
> > >> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> > >> > donal.lafferty@citrix.com> wrote:
> > >> >
> > >> >> This seems to explain the problem you are seeing.
> > >> >>
> > >> >> "The disadvantage of NAT mode is that, much like a private
> > network
> > >> behind
> > >> >> a router, the virtual machine is invisible and unreachable from
> > the
> > >> outside
> > >> >> internet; you cannot run a server this way unless you set up port
> > >> >> forwarding (described below)."
> > >> >>
> > >> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
> > >> >>
> > >> >>
> > >> >> If you want to stick with NAT, you should create a VM in the
> > virtual
> > >> box
> > >> >> install that can run your browser.  Alternatively, use a bridge
> > >> adapter.
> > >> >>
> > >> >>
> > >> >> BTW, where is the DHCP daemon that is allocating addresses to
> > your VMs?
> > >> >>
> > >> >>
> > >> >>
> > >> >>
> > >> >> -----Original Message-----
> > >> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
> > >> >> Sent: 24 October 2012 10:37
> > >> >> To: cloudstack-users@incubator.apache.org
> > >> >> Subject: Re: CloudStack running in Virtualbox
> > >> >>
> > >> >> Are you connecting from the host running virtual box to the VM
> > running
> > >> the
> > >> >> management server over SSH or HTTP?
> > >> >> > No.
> > >> >>
> > >> >>  10.0.2.50 = VirtualBox IP address
> > >> >>  10.0.2.15 = CloudStack management server
> > >> >>  10.0.2.179 = an instance created using the console (
> > >> >> http://localhost:8080/client/). I can connect to the web console
> > from
> > >> the
> > >> >> ubuntu machine where VirtualBox has been installed and running
> > the
> > >> image
> > >> >> CloudStack
> > >> >>
> > >> >> I cannot connect to the management server using address
> > >> >> http://10.0.2.15:8080/client
> > >> >>
> > >> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> > >> >> <donal.lafferty@citrix.com>wrote:
> > >> >>
> > >> >> > Hi Charles,
> > >> >> >
> > >> >> > Need more information.
> > >> >> >
> > >> >> > Are you connecting from the host running virtual box to the
VM
> > >> running
> > >> >> the
> > >> >> > management server over SSH or HTTP?
> > >> >> >
> > >> >> > For HTTP, AFAIK you not to include the port and virtual path.
> > E.g.
> > >> >> > http://10.0.2.179:8080/client
> > >> >> >
> > >> >> > Also, can you confirm what IP addresses you have?  10.0.2.50
> > seems
> > >> to be
> > >> >> > the VirtualBox gateway and 10.0.2.179 the management server.
> > So
> > >> what is
> > >> >> > 10.0.2.15?
> > >> >> >
> > >> >> > DL
> > >> >> >
> > >> >> >
> > >> >> > -----Original Message-----
> > >> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> > >> >> > Sent: 24 October 2012 09:49
> > >> >> > To: cloudstack-users@incubator.apache.org
> > >> >> > Subject: CloudStack running in Virtualbox
> > >> >> >
> > >> >> > Hi,
> > >> >> >
> > >> >> > Hi. I have installed successfully the following image in
> > virtualbox (
> > >> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova)
and
> > >> created
> > >> >> an
> > >> >> > instance. Unfortunately, I cannot connect to it with its
IP
> > address
> > >> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter
+
> > vboxnet
> > >> >> > (10.0.2.50). Is there something else to configure ?
> > >> >> > When I log to the Unix machine (where CloudStack has been
> > deployed),
> > >> I
> > >> >> can
> > >> >> > ping 10.0.2.15 address but not 10.0.2.179.
> > >> >> >
> > >> >> > Regards,
> > >> >> >
> > >> >> > --
> > >> >> > Charles Moulliard
> > >> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >> >
> > >> >>
> > >> >>
> > >> >>
> > >> >> --
> > >> >> Charles Moulliard
> > >> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> > Charles Moulliard
> > >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >
> > >> >
> > >> >
> > >>
> > >>
> > >> --
> > >> Charles Moulliard
> > >> Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >>
> > >
> > >
> > >
> > > --
> > > Charles Moulliard
> > > Apache Committer / Sr. Enterprise Architect (RedHat)
> > > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >
> > >
> > >
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message