cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Edison Su <Edison...@citrix.com>
Subject RE: CloudStack running in Virtualbox
Date Wed, 24 Oct 2012 16:14:47 GMT
When you import devcloud image into virtualbox, please do NOT select "re-initialize the MAC
address of all network cards"
I'll add it on the document.

> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: Wednesday, October 24, 2012 6:29 AM
> To: cloudstack-users@incubator.apache.org
> Subject: Re: CloudStack running in Virtualbox
> 
> Hi Rohit,
> 
> I have followed instructions here ((
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup)
> but I cannot ping the DevCloud VM machine at this address 192.168.56.2
> from
> the machine where VB is running.
> 
> Host = LinuxMint running VirtualBox
> 
> ping 192.168.56.2
> PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> 
>  ifconfig
> eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
>           inet addr:192.168.1.5  Bcast:192.168.1.255
> Mask:255.255.255.0
>           inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
>           Interrupt:20 Memory:e9600000-e9620000
> 
> vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
>           inet addr:192.168.56.1  Bcast:192.168.56.255
> Mask:255.255.255.0
>           inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> 
> Guest = DevCloud VM
> 
> After logging using root / password
> 
> ifconfig -->
> xenbr0 = 192.168.56.2/255.255.255.0
> eth0 is not configured
> eth1 has a MAC address but no IP address
> xenbr1 has a MAC address but no IP address
> 
> So something is missing in the config presented at the link ?
> 
> Regards,
> 
> Charles
> 
> On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch007m@gmail.com>
> wrote:
> 
> > Hi Rohit,
> >
> > Thx for the update.
> > Additional questions :
> > - If the machine containing the VB is linked by example to the
> following
> > network 192.168.1.x/255.255.255.0 and has access to internet using a
> DHCP
> > server, do you think that the network to be used for the host only
> adapter
> > should be 192.168.56.x as defined here (
> >
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup)
> > ?
> > - How will it be possible for the DevCloud VM machine to have access
> to
> > internet if we use only between VB and cloud machine the host only
> adapter
> > and not NAT or Bridge adapter as second adapter ?
> >
> > There is a missing piece in the wiki page : You should tell to the
> user
> > how it should configure the vboxnet0 adapter in VB that we will use
> with
> > the host only adapter ! The existing page explains only how to
> configure
> > the DevCloud VM (/etc/hosts file)
> >
> > Regards,
> >
> > Charles
> >
> >
> > On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav
> <rohit.yadav@citrix.com>wrote:
> >
> >> I think the bridge mode may not be a good idea, as it may pollute
> your
> >> LAN.
> >> I suggest you try the host-only adapter:
> >>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup
> >>
> >> Note: this for the latest asf master where we use maven and ant is
> only
> >> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you
> setup the
> >> network in devcloud for host-only adapter).
> >>
> >> Regards.
> >> ________________________________________
> >> From: Charles Moulliard [ch007m@gmail.com]
> >> Sent: Wednesday, October 24, 2012 4:34 PM
> >> To: cloudstack-users@incubator.apache.org
> >> Subject: Re: CloudStack running in Virtualbox
> >>
> >> Damned. By changing the network adapter from NAT to bridge adapter
> in VB,
> >> I
> >> cannot anymore connect to the management server from the browser
> running
> >> in
> >> the host machine (= ubuntu machine) using localhost or 192.168.1.3
> or
> >> 10.0.2.15 followed by 8080/client
> >>
> >> ssh works well from ubuntu to the VB image (CloudStack) like you can
> see
> >> hereafter
> >>
> >> ssh root@192.168.1.3
> >> root@192.168.1.3's password:
> >> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
> >>
> >>  * Documentation:  https://help.ubuntu.com/
> >>
> >>   System information as of Wed Oct 24 04:01:34 PDT 2012
> >>
> >>   System load:  0.07              Processes:             112
> >>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
> >>   Memory usage: 22%               IP address for eth0:   192.168.1.3
> >>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
> >>
> >>
> >> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard
> <ch007m@gmail.com
> >> >wrote:
> >>
> >> > I will change from NAT to bridge adapter.
> >> > DHCP is configured on the DSL router (= LAN where the machine is
> >> plugged)
> >> >
> >> >
> >> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> >> > donal.lafferty@citrix.com> wrote:
> >> >
> >> >> This seems to explain the problem you are seeing.
> >> >>
> >> >> "The disadvantage of NAT mode is that, much like a private
> network
> >> behind
> >> >> a router, the virtual machine is invisible and unreachable from
> the
> >> outside
> >> >> internet; you cannot run a server this way unless you set up port
> >> >> forwarding (described below)."
> >> >>
> >> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
> >> >>
> >> >>
> >> >> If you want to stick with NAT, you should create a VM in the
> virtual
> >> box
> >> >> install that can run your browser.  Alternatively, use a bridge
> >> adapter.
> >> >>
> >> >>
> >> >> BTW, where is the DHCP daemon that is allocating addresses to
> your VMs?
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> -----Original Message-----
> >> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> >> Sent: 24 October 2012 10:37
> >> >> To: cloudstack-users@incubator.apache.org
> >> >> Subject: Re: CloudStack running in Virtualbox
> >> >>
> >> >> Are you connecting from the host running virtual box to the VM
> running
> >> the
> >> >> management server over SSH or HTTP?
> >> >> > No.
> >> >>
> >> >>  10.0.2.50 = VirtualBox IP address
> >> >>  10.0.2.15 = CloudStack management server
> >> >>  10.0.2.179 = an instance created using the console (
> >> >> http://localhost:8080/client/). I can connect to the web console
> from
> >> the
> >> >> ubuntu machine where VirtualBox has been installed and running
> the
> >> image
> >> >> CloudStack
> >> >>
> >> >> I cannot connect to the management server using address
> >> >> http://10.0.2.15:8080/client
> >> >>
> >> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> >> >> <donal.lafferty@citrix.com>wrote:
> >> >>
> >> >> > Hi Charles,
> >> >> >
> >> >> > Need more information.
> >> >> >
> >> >> > Are you connecting from the host running virtual box to the VM
> >> running
> >> >> the
> >> >> > management server over SSH or HTTP?
> >> >> >
> >> >> > For HTTP, AFAIK you not to include the port and virtual path.
> E.g.
> >> >> > http://10.0.2.179:8080/client
> >> >> >
> >> >> > Also, can you confirm what IP addresses you have?  10.0.2.50
> seems
> >> to be
> >> >> > the VirtualBox gateway and 10.0.2.179 the management server.
> So
> >> what is
> >> >> > 10.0.2.15?
> >> >> >
> >> >> > DL
> >> >> >
> >> >> >
> >> >> > -----Original Message-----
> >> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> >> > Sent: 24 October 2012 09:49
> >> >> > To: cloudstack-users@incubator.apache.org
> >> >> > Subject: CloudStack running in Virtualbox
> >> >> >
> >> >> > Hi,
> >> >> >
> >> >> > Hi. I have installed successfully the following image in
> virtualbox (
> >> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and
> >> created
> >> >> an
> >> >> > instance. Unfortunately, I cannot connect to it with its IP
> address
> >> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter +
> vboxnet
> >> >> > (10.0.2.50). Is there something else to configure ?
> >> >> > When I log to the Unix machine (where CloudStack has been
> deployed),
> >> I
> >> >> can
> >> >> > ping 10.0.2.15 address but not 10.0.2.179.
> >> >> >
> >> >> > Regards,
> >> >> >
> >> >> > --
> >> >> > Charles Moulliard
> >> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> >> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Charles Moulliard
> >> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> > Charles Moulliard
> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >
> >> >
> >> >
> >>
> >>
> >> --
> >> Charles Moulliard
> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>
> >
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >
> >
> >
> 
> 
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Mime
View raw message