cloudstack-users-cn mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "aix.niuy" <aix.n...@gmail.com>
Subject 回复: Re: 答复: 虚拟路由磁盘写满导致不工作
Date Fri, 29 Aug 2014 05:30:40 GMT
3Q 受教了 

2014-08-29



aix.niuy



发件人:"linuxbqj@gmail.com" <linuxbqj@gmail.com>
发送时间:2014-08-29 13:11
主题:Re: 答复: 虚拟路由磁盘写满导致不工作
收件人:"users-cn"<users-cn@cloudstack.apache.org>
抄送:

找下 conntrackd.conf  把其中的 LogFile on 把这条设置为off 
# 
# General settings 
# 
General { 
# 
# Set the nice value of the daemon. This value goes from -20 
# (most favorable scheduling) to 19 (least favorable). Using a 
# negative value reduces the chances to lose state-change events. 
# Default is 0. See man nice(1) for more information. 
# 
Nice -1 
# 
# Select a different scheduler for the daemon, you can select between 
# RR and FIFO and the process priority (minimum is 0, maximum is 99). 
# See man sched_setscheduler(2) for more information. Using a RT 
# scheduler reduces the chances to overrun the Netlink buffer. 
# 
# Scheduler { 
# Type FIFO 
# Priority 99 
# } 
# 
# Number of buckets in the caches: hash table 
# 
HashSize 8192 
# 
# Maximum number of conntracks: 
# it must be >= $ cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max 
# 
HashLimit 65535 
# 
# Logfile: on (/var/log/conntrackd.log), off, or a filename 
# Default: off 
# 
#LogFile on 
# 
# Syslog: on, off or a facility name (daemon (default) or local0..7) 
# Default: off 
# 
#Syslog on 
# 
# Lockfile 
# 
LockFile /var/lock/conntrack.lock 
# 
# Unix socket configuration 
# 
UNIX { 
Path /var/run/conntrackd.ctl 
Backlog 20 
} 
# 
# Netlink socket buffer size 
# 
NetlinkBufferSize 262142 
# 
# Increase the socket buffer up to maximun if required 
# 
NetlinkBufferSizeMaxGrowth 655355 
# 
# By default, the daemon receives state updates following an 
# event-driven model. You can modify this behaviour by switching to 
# polling mode with the PollSecs clause. This clause tells conntrackd 
# to dump the states in the kernel every N seconds. With regards to 
# synchronization mode, the polling mode can only guarantee that 
# long-lifetime states are recovered. The main advantage of this method 
# is the reduction in the state replication at the cost of reducing the 
# chances of recovering connections. 
# 
# PollSecs 15 
# 
# Event filtering: This clause allows you to filter certain traffic, 
# There are currently three filter-sets: Protocol, Address and 
# State. The filter is attached to an action that can be: Accept or 
# Ignore. Thus, you can define the event filtering policy of the 
# filter-sets in positive or negative logic depending on your needs. 
# 
Filter { 
# 
# Accept only certain protocols: You may want to log the 
# state of flows depending on their layer 4 protocol. 
# 
Protocol Accept { 
TCP 
# UDP 
} 
# 
# Ignore traffic for a certain set of IP's. 
# 
Address Ignore { 
IPv4_address 127.0.0.1 # loopback 
# IPv6_address ::1 
} 
# 
# Uncomment this line below if you want to filter by flow state. 
# The existing TCP states are: SYN_SENT, SYN_RECV, ESTABLISHED, 
# FIN_WAIT, CLOSE_WAIT, LAST_ACK, TIME_WAIT, CLOSED, LISTEN. 
# 
# State Accept { 
# ESTABLISHED CLOSED TIME_WAIT CLOSE_WAIT for TCP 
# } 
} 
} 
Stats { 
# 
# If you enable this option, the daemon writes the information about 
# destroyed connections to a logfile. Default is off. 
# Logfile: on, off, or a filename 
# Default file: (/var/log/conntrackd-stats.log) 
# 

LogFile on 把这条设置为off 


# If you want reliable event reporting over Netlink, set on this 
# option. If you set on this clause, it is a good idea to set off 
# NetlinkOverrunResync. This option is off by default and you need 
# a Linux kernel >= 2.6.31. 
# 
# NetlinkEventsReliable Off 
# 
# Enable connection logging via Syslog. Default is off. 
# Syslog: on, off or a facility name (daemon (default) or local0..7) 
# If you set the facility, use the same as in the General clause, 
# otherwise you'll get a warning message. 
# 
#Syslog on 
} 

2014-08-28 14:44 GMT+08:00 张仕博 <zhangshb@neusoft.com>: 
> 现在就是定时清的方式,急需根本的解决办法 
> 
> 
> -----邮件原件----- 
> 发件人: aix.niuy [mailto:aix.niuy@gmail.com] 
> 发送时间: 2014年8月28日 14:41 
> 收件人: users-cn 
> 主题: 回复: 虚拟路由磁盘写满导致不工作 
> 
> 做调度定时清空 我也遇到了没找到禁止写入的办法 现在1分钟进行一次

> 
> cat /dev/null > /var/log/conntrackd-stats.log 2>/dev/null 
> 
> 然后加入 
> /var/spool/cron/crontabs/root 
> 2014-08-28 
> 
> 
> 
> aix.niuy 
> 
> 
> 
> 发件人:张仕博 <zhangshb@neusoft.com> 
> 发送时间:2014-08-28 14:34 
> 主题:虚拟路由磁盘写满导致不工作 
> 收件人:"users-cn"<users-cn@cloudstack.apache.org> 
> 抄送: 
> 
> router虚拟机磁盘被conntrackd服务日志写满大家遇到过么? 
> 
> Conntrackd-stats.log文件太大了,有什么办法禁用日志写入么? 
> 
> 
> 
> ---------------------------------------------------------------------------------------------------

> Confidentiality Notice: The information contained in this e-mail and any accompanying
attachment(s) 
> is intended only for the use of the intended recipient and may be confidential and/or
privileged of 
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication
is 
> not the intended recipient, unauthorized use, forwarding, printing,  storing, disclosure
or copying 
> is strictly prohibited, and may be unlawful.If you have received this communication in
error,please 
> immediately notify the sender by return e-mail, and delete the original message and all
copies from 
> your system. Thank you. 
> ---------------------------------------------------------------------------------------------------

> ---------------------------------------------------------------------------------------------------

> Confidentiality Notice: The information contained in this e-mail and any accompanying
attachment(s) 
> is intended only for the use of the intended recipient and may be confidential and/or
privileged of 
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication
is 
> not the intended recipient, unauthorized use, forwarding, printing,  storing, disclosure
or copying 
> is strictly prohibited, and may be unlawful.If you have received this communication in
error,please 
> immediately notify the sender by return e-mail, and delete the original message and all
copies from 
> your system. Thank you. 
> ---------------------------------------------------------------------------------------------------




--  
白清杰 (Born Bai) 

Mail: linuxbqj@gmail.com 
Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message