cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Boris Roman Schrijver <BSchrij...@schubergphilis.com>
Subject Re: [VOTE] Apache CloudStack 4.8.0
Date Mon, 25 Jan 2016 07:55:50 GMT
Hi all,

My vote: +1 (binding)

Based on below integration tests and manual verification.

 
 
 Boris Roman Schrijver
Mission Critical Engineer

+31 20 7506500
Boeingavenue 271
1119 PD Schiphol-Rijk

 <https://www.schubergphilis.com/>
 







On 24/01/16 19:58, "Remi Bergsma" <RBergsma@schubergphilis.com> wrote:

>Hi all,
>
>My vote: +1 (binding) is based on the integration  tests below.
>
>Regards,
>Remi
>
>
>```
>nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true
\
>component/test_vpc_redundant.py \
>component/test_routers_iptables_default_policy.py \
>component/test_routers_network_ops.py \
>component/test_vpc_router_nics.py \
>smoke/test_loadbalance.py \
>smoke/test_internal_lb.py \
>smoke/test_ssvm.py \
>smoke/test_network.py
>
>```
>Result:
>
>```
>Check the password file in the Router VM ... === TestName: test_isolate_network_password_server
| Status : SUCCESS ===
>ok
>Create a redundant VPC with two networks with two VMs in each network ... === TestName:
test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
>ok
>Create a redundant VPC with two networks with two VMs in each network and check default
routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
>ok
>Create a redundant VPC with two networks with two VMs in each network ... === TestName:
test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers | Status : SUCCESS ===
>ok
>Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC Nics ... ===
TestName: test_04_rvpc_network_garbage_collector_nics | Status : SUCCESS ===
>ok
>Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC Nics ... ===
TestName: test_05_rvpc_multi_tiers | Status : SUCCESS ===
>ok
>Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies
| Status : SUCCESS ===
>ok
>Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies
| Status : SUCCESS ===
>ok
>Test redundant router internals ... === TestName: test_01_isolate_network_FW_PF_default_routes_egress_true
| Status : SUCCESS ===
>ok
>Test redundant router internals ... === TestName: test_02_isolate_network_FW_PF_default_routes_egress_false
| Status : SUCCESS ===
>ok
>Test redundant router internals ... === TestName: test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true
| Status : SUCCESS ===
>ok
>Test redundant router internals ... === TestName: test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false
| Status : SUCCESS ===
>ok
>Test redundant router internals ... === TestName: test_03_RVR_Network_check_router_state
| Status : SUCCESS ===
>ok
>Create a VPC with two networks with one VM in each network and test nics after destroy
... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
>ok
>Create a VPC with two networks with one VM in each network and test default routes ...
=== TestName: test_02_VPC_default_routes | Status : SUCCESS ===
>ok
>Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts
| Status : SUCCESS ===
>ok
>Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat
| Status : SUCCESS ===
>ok
>Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat
| Status : SUCCESS ===
>ok
>Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb
| Status : SUCCESS ===
>ok
>Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's in
a Single VPC ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status
: SUCCESS ===
>ok
>Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's in
a Redundant VPC ... === TestName: test_02_internallb_roundrobin_1RVPC_3VM_HTTP_port80 | Status
: SUCCESS ===
>ok
>Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test_03_vpc_internallb_haproxy_stats_on_all_interfaces
| Status : SUCCESS ===
>ok
>Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test_04_rvpc_internallb_haproxy_stats_on_all_interfaces
| Status : SUCCESS ===
>ok
>Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
>ok
>Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
>ok
>Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
>ok
>Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
>ok
>Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
>ok
>Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
>ok
>Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
>ok
>Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
>ok
>Test Site 2 Site VPN Across redundant VPCs ... === TestName: test_01_redundant_vpc_site2site_vpn
| Status : SUCCESS ===
>ok
>Test Remote Access VPN in VPC ... === TestName: test_01_vpc_remote_access_vpn | Status
: SUCCESS ===
>ok
>Test Site 2 Site VPN Across VPCs ... === TestName: test_01_vpc_site2site_vpn | Status
: SUCCESS ===
>ok
>test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ...
=== TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
>ok
>test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL)
... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
>ok
>test_03_vpc_privategw_restart_vpc_cleanup (integration.smoke.test_privategw_acl.TestPrivateGwACL)
... === TestName: test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
>ok
>test_04_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL)
... === TestName: test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
>ok
>Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat |
Status : SUCCESS ===
>ok
>Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat
| Status : SUCCESS ===
>ok
>Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
>ok
>Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule
| Status : SUCCESS ===
>ok
>Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule
| Status : SUCCESS ===
>ok
>Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule
| Status : SUCCESS ===
>ok
>----------------------------------------------------------------------
>Ran 44 tests in 22198.664s
>
>OK
>```
>
>
>And:
>
>```
>nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false
\
>smoke/test_routers.py \
>smoke/test_network_acl.py \
>smoke/test_privategw_acl.py \
>smoke/test_reset_vm_on_reboot.py \
>smoke/test_vm_life_cycle.py \
>smoke/test_vpc_vpn.py \
>smoke/test_service_offerings.py \
>component/test_vpc_offerings.py \
>component/test_vpc_routers.py
>```
>
>Result:
>
>```
>Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status
: SUCCESS ===
>ok
>Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS
===
>ok
>Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
>ok
>Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS
===
>ok
>Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
>ok
>Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
>ok
>Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
>ok
>Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status
: SUCCESS ===
>ok
>Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status
: SUCCESS ===
>ok
>Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
>ok
>Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status
: SUCCESS ===
>ok
>Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
>ok
>Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
>ok
>Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
>ok
>Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
>ok
>Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
>ok
>Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
>ok
>Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status :
SUCCESS ===
>ok
>Test to create service offering ... === TestName: test_01_create_service_offering | Status
: SUCCESS ===
>ok
>Test to update existing service offering ... === TestName: test_02_edit_service_offering
| Status : SUCCESS ===
>ok
>Test to delete service offering ... === TestName: test_03_delete_service_offering | Status
: SUCCESS ===
>ok
>Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
>ok
>Test for Associate/Disassociate public IP address for admin account ... === TestName:
test_public_ip_admin_account | Status : SUCCESS ===
>ok
>Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account
| Status : SUCCESS ===
>ok
>Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS
===
>ok
>Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS
===
>ok
>Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb
| Status : SUCCESS ===
>ok
>Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat
| Status : SUCCESS ===
>ok
>Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf
| Status : SUCCESS ===
>ok
>Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services
| Status : SUCCESS ===
>ok
>Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
>ok
>Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
>ok
>test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering)
... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
>ok
>Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network
| Status : SUCCESS ===
>ok
>Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network
| Status : SUCCESS ===
>ok
>Test to change service offering of router after addition of one guest network ... ===
TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS
===
>ok
>Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network
| Status : SUCCESS ===
>ok
>Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc
| Status : SUCCESS ===
>ok
>Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc
| Status : SUCCESS ===
>ok
>Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc
| Status : SUCCESS ===
>ok
>Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc
| Status : SUCCESS ===
>ok
>
>----------------------------------------------------------------------
>Ran 41 tests in 7269.824s
>
>OK
>```
>
>
>From: Remi Bergsma <RBergsma@schubergphilis.com<mailto:RBergsma@schubergphilis.com>>
>Date: Thursday 21 January 2016 00:01
>To: "dev@cloudstack.apache.org<mailto:dev@cloudstack.apache.org>" <dev@cloudstack.apache.org<mailto:dev@cloudstack.apache.org>>
>Subject: [VOTE] Apache CloudStack 4.8.0
>
>Hi all,
>
>I've created a 4.8.0 release candidate, with the following artifacts up for a vote:
>
>Git Branch and Commit SH:
>https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=4.8.0-RC20160120T2343
>
>Commit: 62f218b7bd0111105d201d1c8516180d8e6d6797
>
>Source release (checksums and signatures are available at the same location):
>https://dist.apache.org/repos/dist/dev/cloudstack/4.8.0/
>
>PGP release keys (signed using A47DDC4F):
>https://dist.apache.org/repos/dist/release/cloudstack/KEYS
>
>Vote will be open for at least 72 hours.
>
>For sanity in tallying the vote, can PMC members please be sure to indicate "(binding)"
with their vote?
>
>[ ] +1  approve
>[ ] +0  no opinion
>[ ] -1  disapprove (and reason why)
>
>
Mime
View raw message