cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Mike Tutkowski <mike.tutkow...@solidfire.com>
Subject Re: [VOTE] Apache CloudStack 4.6.0
Date Thu, 05 Nov 2015 18:54:46 GMT
Hi,

I don't know if it's something in my environment, but I am running a basic
zone with one pod and one XenServer 6.5 cluster and my VMs don't seem to
get IP addresses from the range I specified.

The VM's hostname is not set properly nor does it produce the correct IP
address when I run ifconfig.

Looking in the GUI, an IP address in the proper range was selected for this
VM, though.

I hesitate to bring this up, though, because I'm currently running these
VMs on a network that has its own DHCP server and I don't know if that
would be causing this problem. I thought I should offer up the info,
though, just in case that DHCP server should not be causing any issue here.

Thanks,
Mike

On Thu, Nov 5, 2015 at 3:34 AM, Wilder Rodrigues <
WRodrigues@schubergphilis.com> wrote:

> Hi all,
>
> I have been busy testing the 4.6.0 RC since last night. The results below
> are still partial (I still have to test XenServer 6.5), but it looks very
> promising!
>
> My vote will be given once I’m done with Xen65 and upgrade tests.
>
> Cheers,
> Wilder
>
> :: Environment 1 ::
>
> * Hardware required: TRUE
> * Management Server + MySQL on CentOS 7.1
> * Two KVM hosts on CentOS 7.1
> * ACS Agent + Common RPMs built from source
>
>
> :: Tests Suites Executed ::
>
> nosetests --with-marvin
> --marvin-config=/data/shared/marvin/mct-zone1-kvm1-ISOLATED.cfg -s -a
> tags=advanced,required_hardware=true component/test_vpc_redundant.py
> component/test_routers_iptables_default_policy.py
> component/test_routers_network_ops.py component/test_vpc_router_nics.py
> component/test_password_server.py component/test_router_dhcphosts.py
> smoke/test_loadbalance.py smoke/test_internal_lb.py smoke/test_ssvm.py
> smoke/test_vpc_vpn.py smoke/test_network.py
>
> :: Environment 2 ::
>
> * Hardware required: FALSE
> * Management Server + MySQL on CentOS 7.1
> * Two KVM hosts on CentOS 7.1
> * ACS Agent + Common RPMs built from source
>
> :: Tests Suites Executed ::
>
> nosetests --with-marvin
> --marvin-config=/data/shared/marvin/mct-zone1-kvm1-ISOLATED.cfg -s -a
> tags=advanced,required_hardware=false smoke/test_routers.py
> smoke/test_reset_vm_on_reboot.py smoke/test_vm_life_cycle.py
> component/test_vpc_routers.py smoke/test_service_offerings.py
> component/test_vpc_offerings.py smoke/test_network_acl.py
> smoke/test_privategw_acl.py smoke/test_network.py
>
> :: Summary ::
>
> * Tests executed: 75
> * Successfull tests: 72
> * Skipped tests: 3(*)
> * Failed tests: 0
>
> (*) Tests were skipped because I had 2 hosts and the current logic in the
> tests does not cope with that: it lists the hosts and takes the one in
> index zero
>     - host = hosts[0]
>
>
> :: Test results for Environment 1 ::
>
> Create a redundant VPC with two networks with two VMs in each network ...
> SKIP: Marvin configuration has no host credentials to
>               check router services
> Create a redundant VPC with two networks with two VMs in each network and
> check default routes ... SKIP: Marvin configuration has no host credentials
> to                                    check router services
> Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName:
> test_02_routervm_iptables_policies | Status : SUCCESS ===
> ok
> Test iptables default INPUT/FORWARD policies on VPC router ... ===
> TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
> ok
> Test redundant router internals ... === TestName:
> test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS
> ===
> ok
> Test redundant router internals ... === TestName:
> test_02_isolate_network_FW_PF_default_routes_egress_false | Status :
> SUCCESS ===
> ok
> Test redundant router internals ... === TestName:
> test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS
> ===
> ok
> Test redundant router internals ... === TestName:
> test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status :
> SUCCESS ===
> ok
> Create a VPC with two networks with one VM in each network and test nics
> after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status :
> SUCCESS ===
> ok
> Create a VPC with two networks with one VM in each network and test
> default routes ... === TestName: test_02_VPC_default_routes | Status :
> SUCCESS ===
> ok
> Check the password file in the Router VM ... === TestName:
> test_isolate_network_password_server | Status : SUCCESS ===
> ok
> Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... ===
> TestName: test_router_dhcphosts | Status : SUCCESS ===
> ok
> Test to create Load balancing rule with source NAT ... === TestName:
> test_01_create_lb_rule_src_nat | Status : SUCCESS ===
> ok
> Test to create Load balancing rule with non source NAT ... === TestName:
> test_02_create_lb_rule_non_nat | Status : SUCCESS ===
> ok
> Test for assign & removing load balancing rule ... === TestName:
> test_assign_and_removal_lb | Status : SUCCESS ===
> ok
> Test to verify access to loadbalancer haproxy admin stats page ... ===
> TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status :
> SUCCESS ===
> ok
> Test create, assign, remove of an Internal LB with roundrobin http traffic
> to 3 vm's ... === TestName:
> test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
> ok
> Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status :
> SUCCESS ===
> ok
> Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status :
> SUCCESS ===
> ok
> Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
> ok
> Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
> ok
> Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS
> ===
> ok
> Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS
> ===
> ok
> Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status :
> SUCCESS ===
> ok
> Test destroy CPVM ... SKIP: Marvin configuration has no host
>               credentials to check router services
> Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn
> | Status : SUCCESS ===
> ok
> Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status :
> SUCCESS ===
> ok
> Test for port forwarding on source NAT ... === TestName:
> test_01_port_fwd_on_src_nat | Status : SUCCESS ===
> ok
> Test for port forwarding on non source NAT ... === TestName:
> test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
> ok
> Test for reboot router ... === TestName: test_reboot_router | Status :
> SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status
> : SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status :
> SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule |
> Status : SUCCESS ===
> ok
> ----------------------------------------------------------------------
> Ran 33 tests in 12005.160s
>
> OK (SKIP=3)
> (END)
>
>
> :: Test results for Environment 1 ::
>
>
> Test router internal advanced zone ... === TestName:
> test_02_router_internal_adv | Status : SUCCESS ===
> ok
> Test restart network ... === TestName: test_03_restart_network_cleanup |
> Status : SUCCESS ===
> ok
> Test router basic setup ... === TestName: test_05_router_basic | Status :
> SUCCESS ===
> ok
> Test router advanced setup ... === TestName: test_06_router_advanced |
> Status : SUCCESS ===
> ok
> Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS
> ===
> ok
> Test start router ... === TestName: test_08_start_router | Status :
> SUCCESS ===
> ok
> Test reboot router ... === TestName: test_09_reboot_router | Status :
> SUCCESS ===
> ok
> Test reset virtual machine on reboot ... === TestName:
> test_01_reset_vm_on_reboot | Status : SUCCESS ===
> ok
> Test advanced zone virtual router ... === TestName:
> test_advZoneVirtualRouter | Status : SUCCESS ===
> ok
> Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status :
> SUCCESS ===
> ok
> Test Multiple Deploy Virtual Machine ... === TestName:
> test_deploy_vm_multiple | Status : SUCCESS ===
> ok
> Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status :
> SUCCESS ===
> ok
> Test Start Virtual Machine ... === TestName: test_02_start_vm | Status :
> SUCCESS ===
> ok
> Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status :
> SUCCESS ===
> ok
> Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status
> : SUCCESS ===
> ok
> Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status
> : SUCCESS ===
> ok
> Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
> ok
> Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm
> | Status : SUCCESS ===
> ok
> Test start/stop of router after addition of one guest network ... ===
> TestName: test_01_start_stop_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test reboot of router after addition of one guest network ... ===
> TestName: test_02_reboot_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test to change service offering of router after addition of one guest
> network ... === TestName:
> test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status :
> SUCCESS ===
> ok
> Test destroy of router after addition of one guest network ... ===
> TestName: test_05_destroy_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test to stop and start router after creation of VPC ... === TestName:
> test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
> ok
> Test to reboot the router after creating a VPC ... === TestName:
> test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
> ok
> Tests to change service offering of the Router after ... === TestName:
> test_04_change_service_offerring_vpc | Status : SUCCESS ===
> ok
> Test to destroy the router after creating a VPC ... === TestName:
> test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
> ok
> Test to create service offering ... === TestName:
> test_01_create_service_offering | Status : SUCCESS ===
> ok
> Test to update existing service offering ... === TestName:
> test_02_edit_service_offering | Status : SUCCESS ===
> ok
> Test to delete service offering ... === TestName:
> test_03_delete_service_offering | Status : SUCCESS ===
> ok
> Test create VPC offering ... === TestName: test_01_create_vpc_offering |
> Status : SUCCESS ===
> ok
> Test VPC offering without load balancing service ... === TestName:
> test_03_vpc_off_without_lb | Status : SUCCESS ===
> ok
> Test VPC offering without static NAT service ... === TestName:
> test_04_vpc_off_without_static_nat | Status : SUCCESS ===
> ok
> Test VPC offering without port forwarding service ... === TestName:
> test_05_vpc_off_without_pf | Status : SUCCESS ===
> ok
> Test VPC offering with invalid services ... === TestName:
> test_06_vpc_off_invalid_services | Status : SUCCESS ===
> ok
> Test update VPC offering ... === TestName: test_07_update_vpc_off | Status
> : SUCCESS ===
> ok
> Test list VPC offering ... === TestName: test_08_list_vpc_off | Status :
> SUCCESS ===
> ok
> test_09_create_redundant_vpc_offering
> (integration.component.test_vpc_offerings.TestVPCOffering) ... ===
> TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
> ok
> test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL)
> ... === TestName: test_privategw_acl | Status : SUCCESS ===
> ok
> Test for delete account ... === TestName: test_delete_account | Status :
> SUCCESS ===
> ok
> Test for Associate/Disassociate public IP address for admin account ...
> === TestName: test_public_ip_admin_account | Status : SUCCESS ===
> ok
> Test for Associate/Disassociate public IP address for user account ... ===
> TestName: test_public_ip_user_account | Status : SUCCESS ===
> ok
> Test for release public IP address ... === TestName: test_releaseIP |
> Status : SUCCESS ===
> ok
>
> ----------------------------------------------------------------------
> Ran 42 tests in 7997,337s
>
> OK
> (END)
>
>
>
> > On 05 Nov 2015, at 09:48, Nux! <nux@li.nux.ro> wrote:
> >
> > Thanks Remi!
> >
> > --
> > Sent from the Delta quadrant using Borg technology!
> >
> > Nux!
> > www.nux.ro
> >
> > ----- Original Message -----
> >> From: "Remi Bergsma" <RBergsma@schubergphilis.com>
> >> To: dev@cloudstack.apache.org
> >> Sent: Wednesday, 4 November, 2015 20:45:59
> >> Subject: Re: [VOTE] Apache CloudStack 4.6.0
> >
> >> Kicked off some Jenkins builds:
> >>
> >> CentOS 6 packages:
> >>
> http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter/lastSuccessfulBuild/artifact/dist/rpmbuild/RPMS/x86_64/
> >>
> >> CentOS 7 packages:
> >>
> http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter-centos7/lastSuccessfulBuild/artifact/dist/rpmbuild/RPMS/x86_64/
> >>
> >> Ubuntu Trusty packages:
> >> http://cloudstack.apt-get.eu/ubuntu/dists/trusty/4.6/pool/
> >>
> >> SystemVM template:
> >>
> http://jenkins.buildacloud.org/view/parameterized/job/parameterized-sytemvm/lastSuccessfulBuild/artifact/tools/appliance/dist/
> >>
> >>
> >> You can always build packages from the source:
> >> cd packaging
> >> ./package.sh -h
> >>
> >> Happy testing!
> >>
> >> Regards,
> >> Remi
> >>
> >>
> >>
> >>
> >>
> >> On 04/11/15 18:12, "Remi Bergsma" <RBergsma@schubergphilis.com> wrote:
> >>
> >>> The jobs failed due to the git clone failing (time out). I also
> experience it is
> >>> quite slow at the moment.
> >>>
> >>> It is mirrored here (same commit id):
> >>> https://github.com/apache/cloudstack/tree/4.6.0-RC20151104T1522
> >>>
> >>> Regards,
> >>> Remi
> >>>
> >>>
> >>>
> >>>
> >>> On 04/11/15 17:17, "Rajani Karuturi" <Rajani.Karuturi@citrix.com>
> wrote:
> >>>
> >>>> I started jenkins builds for cloudstack RPM packages and systemvm
> templates for
> >>>> this branch here
> >>>>
> >>>>
> http://jenkins.buildacloud.org/view/parameterized/job/cloudstack-rpm-packages-with-branch-parameter/19/console
> >>>>
> http://jenkins.buildacloud.org/view/parameterized/job/parameterized-sytemvm/3/console
> >>>>
> >>>> We can use them once the build is complete.
> >>>>
> >>>> ~Rajani
> >>>>
> >>>> On 04-Nov-2015, at 8:58 PM, Nux! <nux@li.nux.ro<mailto:nux@li.nux.ro>>
> wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> Has jenkins built rpms for this somewhere?
> >>>>
> >>>> --
> >>>> Sent from the Delta quadrant using Borg technology!
> >>>>
> >>>> Nux!
> >>>> www.nux.ro<http://www.nux.ro>
> >>>>
> >>>> ----- Original Message -----
> >>>> From: "Remi Bergsma" <RBergsma@schubergphilis.com>
> >>>> To: dev@cloudstack.apache.org
> >>>> Sent: Wednesday, 4 November, 2015 14:55:11
> >>>> Subject: [VOTE] Apache CloudStack 4.6.0
> >>>>
> >>>> Hi all,
> >>>>
> >>>> I've created a 4.6.0 release candidate, with the following artifacts
> up for a
> >>>> vote:
> >>>>
> >>>> Git Branch and Commit SH:
> >>>>
> https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=4.6.0-RC20151104T1522
> >>>>
> >>>> Commit: b0ebe68e375432b28eef031ab62ccd5831234c77
> >>>>
> >>>> Source release (checksums and signatures are available at the same
> >>>> location):
> >>>> https://dist.apache.org/repos/dist/dev/cloudstack/4.6.0/
> >>>>
> >>>> PGP release keys (signed using A47DDC4F):
> >>>> https://dist.apache.org/repos/dist/release/cloudstack/KEYS
> >>>>
> >>>> Vote will be open for at least 72 hours.
> >>>>
> >>>> For sanity in tallying the vote, can PMC members please be sure to
> indicate
> >>>> "(binding)" with their vote?
> >>>>
> >>>> [ ] +1  approve
> >>>> [ ] +0  no opinion
> >>>> [ ] -1  disapprove (and reason why)
>
>


-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message