cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Will Stevens <wstev...@cloudops.com>
Subject Re: CloudStack Dev Env
Date Fri, 01 Aug 2014 19:07:20 GMT
Thanks for the details.  Yes, I am setting up environment right now, so I
will see how it goes.  I just realized that your setup basically requires
all the same commands as what I use for devcloud, but we just point to your
json file instead of the devcloud json file.

*Correction*:  I was wrong about the 'skip tests' statement in my original
post.  It is not the skip tests that causes the problem with the clean
install command.  It is the 'developer' profile which fails when building
the 'apidocs'.  Thought I should clear that up...  I am using the skip
tests because i don't want to wait for the tests to be run the second time.
 :)

Will


*Will STEVENS*
Lead Developer

*CloudOps* *| *Cloud Solutions Experts
420 rue Guy *|* Montreal *|* Quebec *|* H3J 1S6
w cloudops.com *|* tw @CloudOps_


On Fri, Aug 1, 2014 at 2:44 PM, Ian Duffy <ian@ianduffy.ie> wrote:

> > I had issues getting advanced networking to work.  I also had issues with
> the VT pass through on Xen on VirtualBox
>
> Virtualbox is a no go for VT.
>
> However, with xenserver this isn't an issue (Open to correction here). We
> can run 32bit VMs nested without issue, we can run VMs in PV mode without
> issue.
>
> This remains an issue for testing KVM,  in that case vmware fusion is
> required.
>
>
> On 1 August 2014 19:01, Will Stevens <wstevens@cloudops.com> wrote:
>
> > Hey All,
> > I figure I should just start a thread for this because it is worth its
> own
> > discussion.
> >
> > I have been building, developing and testing CS code for quite some time
> > now.  I have a bit of a system down now, but it is still a battle every
> > time.  I know that a lot of you probably have your own systems in place,
> so
> > I am interested to know how you are working.
> >
> > Here are my requirements:
> > - I need to be able to write code on my laptop (Mac in my case).
> > - I need to be able to have different CS builds functional at the same
> time
> > (potentially with different versions).
> > - I need Advanced networking.
> > - I need to be able to connect from my CS environments to other network
> > providers (such as a Palo Alto firewall or an SDX) to orchestrate
> > configuration.
> >
> > Here is what I currently have setup.
> > - I have VMware Fusion 6 installed on my Mac.
> > - I have one VM setup as Xenserver.
> > - I have one VM setup for CS with NFS for secondary storage which just
> > points to itself.
> > - I have two networks which I use for management and guest/public traffic
> > configured between them.
> >
> > I have a clean install of Xenserver that is all setup and in a state
> where
> > it is ready to go for CS.  I then snapshot it in that state and that
> > snapshot is the starting point for all of my CS deploys.
> > I have a clean install of CentOS with all of the requirements setup
> (mysql,
> > maven, java, etc...) setup.  With everything installed and setup ready
> for
> > CS to be built and deployed, I snapshot that VM and work from it as the
> > starting point for my management server.
> >
> > I only ever have one environment running, but I can have multiple
> > environments snapshotted if I need to bring one up to test something.
> >
> > When I need to bring up a new environment or blow away an environment to
> > start from scratch, I revert to the two snapshots and start from there.
> >
> > I have the git repo's for CS on my local machine and I share the
> directory
> > with the CentOS VM.  This enables me to work on my local machine and then
> > build and deploy in the VM in an isolated environment.
> >
> > There is one little caveat with this though.  Before I build CS, I have
> to
> > modify the 'tools/marvin/pom.xml' file and change the install type from
> > 'sdist' to 'install' because the directory is shared, so 'sdist' does not
> > work.
> >
> > Right now I am installing using Devcloud, so my flow is as follows:
> >
> > Build Cloudstack (from scratch):
> >
> > $ mvn -P developer,systemvm clean install
> >
> > (this will work up to compiling 'marvin' and then it will fail)
> >
> > I then run:
> >
> > $ mvn -P systemvm -Dmaven.test.skip=true install
> >
> > (this now successfully builds everything.  i can not run with skip tests
> > initially because apparently there are some dependencies that are put in
> > place by the tests.  i have not investigated this, so i just use this
> flow
> > cause it works.)
> >
> > Now that everything is built, I install the latest Marvin:
> >
> > $ cd tools/marvin; python setup.py install
> >
> > (this is required on some versions and not on others, I put it here
> because
> > this is where you have to do it if it is required.)
> >
> > Now I deploy the database:
> >
> > $ mvn -P developer -pl developer,tools/devcloud -Ddeploydb
> >
> > Then I start the server (chmod path changes based on branch):
> >
> > $ chmod 755
> >
> >
> $cs/client/target/cloud-client-ui-4.3.0/WEB-INF/classes/scripts/vm/systemvm/injectkeys.sh
> > $ export MAVEN_OPTS="-Xmx1024m -XX:MaxPermSize=512m -Xdebug
> > -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n"
> > $ mvn -pl :cloud-client-ui jetty:run
> >
> > With the server running I then run the deploy server script to configure
> CS
> > according to the devcloud config:
> >
> > $ export MAVEN_OPTS=""
> > $ mvn -P developer -pl tools/devcloud -Ddeploysvr -X
> >
> > Assuming marvin is happy (which sometimes happens :) ), the configuration
> > is completed and I have an environment configured and ready to go.
> >
> > Note: woops, I forgot to put the install of system templates in my
> > workflow, but that is described in the 'build cloudstack from source'
> wiki
> > page.
> >
> > I have recently been pointed at this setup:
> > https://github.com/imduffy15/GSoC-2014
> >
> > I will give this a shot to see if it simplifies any of this.  When I
> tried
> > to use VirtualBox previously for this setup, I had issues getting
> advanced
> > networking to work.  I also had issues with the VT pass through on Xen on
> > VirtualBox, so we will see if that still causes problems with this setup.
> >  I also had problems with shared folders on VirtualBox, so I had issues
> > working with code from my host machine.
> >
> > I will give it a shot though.  Hopefully it will make this process
> easier.
> >
> > So, now for the question/discussion.  What do you use as your dev
> > environment?  Do you have a better system in place than what I have?
> >
> > Cheers,
> >
> > *Will STEVENS*
> > Lead Developer
> >
> > *CloudOps* *| *Cloud Solutions Experts
> > 420 rue Guy *|* Montreal *|* Quebec *|* H3J 1S6
> > w cloudops.com *|* tw @CloudOps_
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message