cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Marcus Sorensen <shadow...@gmail.com>
Subject Re: KVM Assistance
Date Fri, 06 Sep 2013 04:23:19 GMT
Well, you sort of have to know what you want to do, that is decide
where management, guest, public traffic is going to go. You don't
really need working public traffic just to run vms, and guest traffic
will stay local to the vm, so that leaves management traffic, which
also doesn't really need to access anything outside of the VM unless
you've got an external secondary storage or are running the mgmt
server on your mac or something.

I think if you've solved your fusion networking problem (meaning you
can create a vm and the host can talk to it),  you've already got a
head start with devcloud-kvm.  You may have to set it to use dhcp
again, ignoring the NAT setup that it does (which I mainly just use to
register templates and debug VPC networking) and ignore one of the
interfaces, but it's preconfigured with secondary storage, primary
storage, and dependencies. In other words, I hope you didn't give up
on it and start from scratch just because of the NAT issues, as it
would be much easier just to tweak it to do what you're doing now.

In either case, assuming you do care about networking, but host-only
is fine and you want that to be management, I'd set up a bridge on
eth0, assign it an IP that the host can reach (dhcp?), and then when
you fill out the pod network info I'd leave the vlan field blank. Then
filling out the network icons, I'd set the 'traffic label' to the name
of the bridge you created for eth0. Then for public traffic I'd make
up an ip range and vlan, and for guest traffic I'd also make up a vlan
range. Those bridges will be created automatically, and will work just
fine within the scope of the single host.  You can probably find
ubuntu-specific info on how to make a bridge on eth0, just a shot in
the dark, might be something like:

# change eth0 to have no config
iface eth0 inet manual

# mgt network
auto cloudmgt
iface cloudmgt inet dhcp
    bridge_ports eth0
    bridge_fd 5
    bridge_stp off
    bridge_maxwait 1

On Thu, Sep 5, 2013 at 9:05 PM, Mike Tutkowski
<mike.tutkowski@solidfire.com> wrote:
> So, I'm trying to follow the directions here on updating my interfaces file
> on Ubuntu 12.04.1:
>
> http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/hypervisor-kvm-install-flow.html
>
> I am running Ubuntu in a VMware Fusion VM with using what Fusion calls a
>  "custom network" (I believe this is a host-only network). I'm not using
> VLANs.
>
> Any thoughts on how I should modify my interfaces file for my situation
> (below is the interfaces file from the CS docs):
>
> Thanks!
>
> auto lo
> iface lo inet loopback
>
> # The primary network interface
> auto eth0.100
> iface eth0.100 inet static
>     address 192.168.42.11
>     netmask 255.255.255.240
>     gateway 192.168.42.1
>     dns-nameservers 8.8.8.8 8.8.4.4
>     dns-domain lab.example.org
>
> # Public network
> auto cloudbr0
> iface cloudbr0 inet manual
>     bridge_ports eth0.200
>     bridge_fd 5
>     bridge_stp off
>     bridge_maxwait 1
>
> # Private network
> auto cloudbr1
> iface cloudbr1 inet manual
>     bridge_ports eth0.300
>     bridge_fd 5
>     bridge_stp off
>     bridge_maxwait 1
>
>
>
> On Fri, Aug 30, 2013 at 8:06 PM, Marcus Sorensen <shadowsor@gmail.com>wrote:
>
>> I'm not sure about the history of the agent. The libvirt api  is remotely
>> accessible, but it has proven to be a moving target, and at least early on
>> it was insufficient. There are other things the agent does as well, which
>> are not directly related to libvirt, like logging into virtual routers and
>> programming them. On the Xen side I believe the APIs are sufficient for
>> that, but on Linux /kvm the alternative would be ssh commands wrapped in
>> ssh commands.
>>
>> I believe with the new architecture your plugin can still configure the SAN
>> via mgmt server, but connecting the disk on the host needs to be done by
>> the agent.
>> On Aug 30, 2013 7:46 PM, "Mike Tutkowski" <mike.tutkowski@solidfire.com>
>> wrote:
>>
>> > Hey Marcus,
>> >
>> > I have a general design question here.
>> >
>> > For the XenServer and VMware plug-ins, the Java code runs on the CSMS,
>> but
>> > for KVM it runs on the host.
>> >
>> > Can you give me an idea why there is this difference?
>> >
>> > I'm just getting up to speed on libvert, so maybe it doesn't have a
>> daemon
>> > that runs that accepts API calls (or its API is insufficient)? Can you
>> > clarify this for me?
>> >
>> > Thanks!
>> >
>> >
>> > On Fri, Aug 30, 2013 at 7:28 PM, Mike Tutkowski <
>> > mike.tutkowski@solidfire.com> wrote:
>> >
>> > > Thanks, Marcus
>> > >
>> > > I believe I will only need to modify LibvirtComputingResource for KVM
>> > > support (based on my experience in 4.2 with CitrixResourceBase and
>> > > VmwareResource).
>> > >
>> > > It will need to be updated to work with CloudStack's managed storage
>> > > (first introduced in the new storage framework in 4.2 and supported in
>> > > XenServer and VMware).
>> > >
>> > > Edison made large modifications to the storage component in 4.2 and I
>> > > wrote a plug-in for SolidFire storage. To fully leverage what the
>> plug-in
>> > > does, I needed to modify logic in the storage framework and hypervisor
>> > > plug-ins (so they didn't assume that storage was necessarily
>> > preallocated -
>> > > it might be created on demand now).
>> > >
>> > >
>> > > On Fri, Aug 30, 2013 at 5:51 PM, Marcus Sorensen <shadowsor@gmail.com
>> > >wrote:
>> > >
>> > >> Er. I mean normal users don't have to deal with jar files. I always
>> > >> install the agent code via rpm when I'm developing, rather than
>> > >> messing with jars, since you rarely just touch one thing in the agent,
>> > >> it's usually a script, or LibvirtComputingResource + some other class
>> > >> files, and it can be easy to miss something. It's easier to just built
>> > >> the packages during the compile and install the whole thing.
>> > >>
>> > >> On Fri, Aug 30, 2013 at 5:49 PM, Marcus Sorensen <shadowsor@gmail.com
>> >
>> > >> wrote:
>> > >> > Package refers to a .deb or a .rpm, the packages used to install.
>> > >> > Normal users never have to deal with them.
>> > >> >
>> > >> > Since you're not developing, you can get them from the website and
>> > >> > install as a normal user would, but to create them look in the
>> > >> > 'packaging' directory, there's a script for ubuntu(debs) and one for
>> > >> > centos (rpms).
>> > >> >
>> > >> > On Fri, Aug 30, 2013 at 2:23 PM, Mike Tutkowski
>> > >> > <mike.tutkowski@solidfire.com> wrote:
>> > >> >> Looking at some CS docs on the web, it appears we are using the
>> term
>> > >> >> "package" here to refer to a JAR file.
>> > >> >>
>> > >> >>
>> > >> >> On Fri, Aug 30, 2013 at 2:20 PM, Mike Tutkowski <
>> > >> >> mike.tutkowski@solidfire.com> wrote:
>> > >> >>
>> > >> >>> I should be a litter clearer. :) I was referring to what you said
>> > >> here,
>> > >> >>> Marcus:
>> > >> >>>
>> > >> >>> "If you are developing, I'd generate the .debs, copy agent and
>> > common
>> > >> >>> packages over, install those"
>> > >> >>>
>> > >> >>> What I'm not sure how to do is generate the .deb files for CS 4.2.
>> > >> >>>
>> > >> >>> Also, when you say copy agent and common packages over, do you
>> just
>> > >> mean
>> > >> >>> the JAR files? If so, do you know where I put them? Is there an
>> > >> install
>> > >> >>> script of some sort on the KVM side I should be running then?
>> > >> >>>
>> > >> >>> Thanks!
>> > >> >>>
>> > >> >>>
>> > >> >>> On Fri, Aug 30, 2013 at 2:16 PM, Mike Tutkowski <
>> > >> >>> mike.tutkowski@solidfire.com> wrote:
>> > >> >>>
>> > >> >>>> Thanks for that info, Marcus
>> > >> >>>>
>> > >> >>>> I did have to assign a password explicitly to the root user
>> > >> (Ubuntu). Now
>> > >> >>>> I can SSH in with root.
>> > >> >>>>
>> > >> >>>> I've never needed to generate .debs and all of that for
>> CloudStack.
>> > >> Do
>> > >> >>>> you know where I might be able to find info on the process to
>> > follow
>> > >> to do
>> > >> >>>> what you wrote?
>> > >> >>>>
>> > >> >>>> Thanks again!
>> > >> >>>>
>> > >> >>>>
>> > >> >>>> On Fri, Aug 30, 2013 at 7:45 AM, Marcus Sorensen <
>> > >> shadowsor@gmail.com>wrote:
>> > >> >>>>
>> > >> >>>>> I'm not sure if you are developing or just trying to get a
>> system
>> > >> >>>>> running.
>> > >> >>>>> If the latter, you should be using the same repo and deb
>> packages
>> > >> for
>> > >> >>>>> both
>> > >> >>>>> the mgt server and agent, such that everything can be installed
>> > via
>> > >> >>>>> 'apt-get install', which is hopefully covered in the docs.
>> > >> >>>>>
>> > >> >>>>> If you are developing, I'd generate the .debs, copy agent and
>> > common
>> > >> >>>>> packages over, install those, and then if agent code changes
>> > during
>> > >> >>>>> development you can either do that again, or manually replace
>> the
>> > >> >>>>> affected
>> > >> >>>>> jars/scripts and restart the agent.
>> > >> >>>>>
>> > >> >>>>> As far as I'm aware the agent needs to run with root permissions
>> > on
>> > >> the
>> > >> >>>>> box. It sounds like you need to fix ssh as a prerequisite before
>> > >> >>>>> beginning
>> > >> >>>>> setup. As mentioned it might be the PermitRootLogin option.
>> > >> >>>>> On Aug 29, 2013 11:22 PM, "Mike Tutkowski" <
>> > >> mike.tutkowski@solidfire.com
>> > >> >>>>> >
>> > >> >>>>> wrote:
>> > >> >>>>>
>> > >> >>>>> > I figured out how to assign a password to root on Ubuntu, but
>> > that
>> > >> >>>>> didn't
>> > >> >>>>> > solve the problem.
>> > >> >>>>> >
>> > >> >>>>> > As I thought about it more, I'm actually running the 4.2 CSMS,
>> > >> but the
>> > >> >>>>> 4.1
>> > >> >>>>> > version of the agent code on the KVM host.
>> > >> >>>>> >
>> > >> >>>>> > I'm not sure how to deploy the newest agent code from the 4.2
>> > >> branch
>> > >> >>>>> to the
>> > >> >>>>> > KVM host, though. Would you be able to tell me how to do that,
>> > >> Marcus?
>> > >> >>>>> >
>> > >> >>>>> > Is there any Java code of ours on the KVM host or is it all in
>> > the
>> > >> >>>>> form of
>> > >> >>>>> > scripts?
>> > >> >>>>> >
>> > >> >>>>> > Thanks!
>> > >> >>>>> >
>> > >> >>>>> >
>> > >> >>>>> > On Thu, Aug 29, 2013 at 10:30 PM, Mike Tutkowski <
>> > >> >>>>> > mike.tutkowski@solidfire.com> wrote:
>> > >> >>>>> >
>> > >> >>>>> > > Yeah, I wanted to use root, but got the following when
>> trying
>> > >> to SSH
>> > >> >>>>> in:
>> > >> >>>>> > >
>> > >> >>>>> > > mtutkowski-LT:~ mtutkowski$ ssh root@172.16.140.5
>> > >> >>>>> > > root@172.16.140.5's password:
>> > >> >>>>> > > Permission denied, please try again.
>> > >> >>>>> > >
>> > >> >>>>> > >
>> > >> >>>>> > > On Thu, Aug 29, 2013 at 10:28 PM, Marcus Sorensen <
>> > >> >>>>> shadowsor@gmail.com
>> > >> >>>>> > >wrote:
>> > >> >>>>> > >
>> > >> >>>>> > >> I've only ever seen it work with root. Do the docs say
>> > >> otherwise?
>> > >> >>>>> Maybe
>> > >> >>>>> > >> your user credentials will work if you have it set with
>> sudo
>> > >> >>>>> privileges
>> > >> >>>>> > >> and
>> > >> >>>>> > >> privileges to libvirtd.
>> > >> >>>>> > >> On Aug 29, 2013 10:25 PM, "Mike Tutkowski" <
>> > >> >>>>> > mike.tutkowski@solidfire.com>
>> > >> >>>>> > >> wrote:
>> > >> >>>>> > >>
>> > >> >>>>> > >> > By the way, I've been supplying the username I log into
>> > >> Ubuntu
>> > >> >>>>> with:
>> > >> >>>>> > >> > mtutkowski (not root). I think that's correct for Ubuntu.
>> > >> >>>>> > >> >
>> > >> >>>>> > >> > After the script executes, I get the following back in
>> the
>> > >> CSMS
>> > >> >>>>> log:
>> > >> >>>>> > >> >
>> > >> >>>>> > >> > { Ans: , MgmtId: 1, via: 2, Ver: v1, Flags: 100010,
>> > >> >>>>> > >> >
>> > >> >>>>>
>> > >> [{"com.cloud.agent.api.AgentControlAnswer":{"result":true,"wait":0}}]
>> > >> >>>>> > }
>> > >> >>>>> > >> >
>> > >> >>>>> > >> >
>> > >> >>>>> > >> > On Thu, Aug 29, 2013 at 10:20 PM, Mike Tutkowski <
>> > >> >>>>> > >> > mike.tutkowski@solidfire.com> wrote:
>> > >> >>>>> > >> >
>> > >> >>>>> > >> > > I don't see a process by either name in System Monitor.
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > > Is that SSH call supposed to have started such a
>> process
>> > >> >>>>> running?
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > > On Thu, Aug 29, 2013 at 10:15 PM, Marcus Sorensen <
>> > >> >>>>> > >> shadowsor@gmail.com
>> > >> >>>>> > >> > >wrote:
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > >> Is the agent running? Or perhaps cloud-setup-agent?
>> > >> >>>>> > >> > >> On Aug 29, 2013 10:13 PM, "Mike Tutkowski" <
>> > >> >>>>> > >> > mike.tutkowski@solidfire.com>
>> > >> >>>>> > >> > >> wrote:
>> > >> >>>>> > >> > >>
>> > >> >>>>> > >> > >> > Interesting...there is an agent folder, but no files
>> > in
>> > >> it.
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> > On Thu, Aug 29, 2013 at 10:10 PM, Mike Tutkowski <
>> > >> >>>>> > >> > >> > mike.tutkowski@solidfire.com> wrote:
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> > > Thanks!
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > > By the way, these are the parameters I pass into
>> > >> >>>>> > >> > >> cloudstack-setup-agent
>> > >> >>>>> > >> > >> > > (just in case something looks odd to you there):
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > > -m 172.16.140.1 -z 1 -p 1 -c 3 -g
>> > >> >>>>> > >> > >> 8bd34de8-783c-387f-a043-aa53ee31df6b -a
>> > >> >>>>> > >> > >> > > --pubNic=cloudbr0 --prvNic=cloudbr0
>> > >> --guestNic=cloudbr0
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > > On Thu, Aug 29, 2013 at 10:07 PM, Marcus Sorensen
>> <
>> > >> >>>>> > >> > >> shadowsor@gmail.com
>> > >> >>>>> > >> > >> > >wrote:
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > >> /var/log/cloudstack/agent/agent.log ... There is
>> > >> also a
>> > >> >>>>> setup
>> > >> >>>>> > >> log
>> > >> >>>>> > >> > in
>> > >> >>>>> > >> > >> > that
>> > >> >>>>> > >> > >> > >> location to see if something in the agent setup
>> > went
>> > >> awry.
>> > >> >>>>> > >> > >> > >> On Aug 29, 2013 10:05 PM, "Mike Tutkowski" <
>> > >> >>>>> > >> > >> > mike.tutkowski@solidfire.com>
>> > >> >>>>> > >> > >> > >> wrote:
>> > >> >>>>> > >> > >> > >>
>> > >> >>>>> > >> > >> > >> > Thanks, Marcus
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> > I'm not used to playing around in a KVM
>> > >> environment.
>> > >> >>>>> Can you
>> > >> >>>>> > >> tell
>> > >> >>>>> > >> > >> me
>> > >> >>>>> > >> > >> > >> where
>> > >> >>>>> > >> > >> > >> > our agent logs are on KVM?
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> > Originally I didn't have SSH installed, but I
>> > >> noticed
>> > >> >>>>> that
>> > >> >>>>> > >> > problem
>> > >> >>>>> > >> > >> > while
>> > >> >>>>> > >> > >> > >> > stepping through the debugger. After I
>> installed
>> > >> it,
>> > >> >>>>> the SSH
>> > >> >>>>> > >> call
>> > >> >>>>> > >> > >> went
>> > >> >>>>> > >> > >> > >> > through just fine as far as the CSMS was
>> > >> concerned, so
>> > >> >>>>> - as
>> > >> >>>>> > >> you
>> > >> >>>>> > >> > >> say -
>> > >> >>>>> > >> > >> > I
>> > >> >>>>> > >> > >> > >> was
>> > >> >>>>> > >> > >> > >> > thinking I should take a look on the KVM side
>> and
>> > >> see if
>> > >> >>>>> > >> maybe an
>> > >> >>>>> > >> > >> > error
>> > >> >>>>> > >> > >> > >> > occurred that it didn't report back.
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> > On Thu, Aug 29, 2013 at 9:57 PM, Marcus
>> Sorensen
>> > <
>> > >> >>>>> > >> > >> shadowsor@gmail.com
>> > >> >>>>> > >> > >> > >> > >wrote:
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> > > Normally the agent service starts and
>> connects
>> > >> up. The
>> > >> >>>>> > mgmt
>> > >> >>>>> > >> > >> server
>> > >> >>>>> > >> > >> > >> uses
>> > >> >>>>> > >> > >> > >> > ssh
>> > >> >>>>> > >> > >> > >> > > to start the agent and set it up for the
>> first
>> > >> time.
>> > >> >>>>> You
>> > >> >>>>> > >> will
>> > >> >>>>> > >> > >> > probably
>> > >> >>>>> > >> > >> > >> > need
>> > >> >>>>> > >> > >> > >> > > to look at the agent logs and see if it is
>> > having
>> > >> >>>>> trouble
>> > >> >>>>> > >> > >> connecting
>> > >> >>>>> > >> > >> > >> to
>> > >> >>>>> > >> > >> > >> > the
>> > >> >>>>> > >> > >> > >> > > mgmt server or something (firewall?).
>> > >> >>>>> > >> > >> > >> > > On Aug 29, 2013 9:55 PM, "Mike Tutkowski" <
>> > >> >>>>> > >> > >> > >> mike.tutkowski@solidfire.com>
>> > >> >>>>> > >> > >> > >> > > wrote:
>> > >> >>>>> > >> > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > So, now I'm trying to add a KVM host to CS
>> > and
>> > >> am
>> > >> >>>>> > having a
>> > >> >>>>> > >> > bit
>> > >> >>>>> > >> > >> of
>> > >> >>>>> > >> > >> > >> > trouble
>> > >> >>>>> > >> > >> > >> > > > with LibvirtServerDiscoverer finding it
>> (this
>> > >> line
>> > >> >>>>> > below:
>> > >> >>>>> > >> > >> > >> List<HostVO>
>> > >> >>>>> > >> > >> > >> > > > hosts =
>> > >> >>>>> > >> > >>
>> _resourceMgr.listAllUpAndEnabledHosts(Host.Type.Routing,
>> > >> >>>>> > >> > >> > >> > > clusterId,
>> > >> >>>>> > >> > >> > >> > > > podId, dcId);).
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >     private HostVO waitForHostConnect(long
>> > >> dcId,
>> > >> >>>>> long
>> > >> >>>>> > >> podId,
>> > >> >>>>> > >> > >> > >> > > > longclusterId, String guid) {
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >         for (int i = 0; i < _waitTime * 2;
>> > >> i++) {
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >             List<HostVO> hosts =
>> _resourceMgr
>> > >> >>>>> > >> > >> > >> > > >
>> .listAllUpAndEnabledHosts(Host.Type.Routing,
>> > >> >>>>> clusterId,
>> > >> >>>>> > >> > podId,
>> > >> >>>>> > >> > >> > >> dcId);
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >             for (HostVO host : hosts) {
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >                 if
>> > >> >>>>> > >> (host.getGuid().equalsIgnoreCase(guid)) {
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >                     return host;
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >                 }
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >             }
>> > >> >>>>> > >> > >> > >> > > > Any thoughts on how I might debug this? Is
>> > >> there a
>> > >> >>>>> log
>> > >> >>>>> > on
>> > >> >>>>> > >> the
>> > >> >>>>> > >> > >> KVM
>> > >> >>>>> > >> > >> > >> host
>> > >> >>>>> > >> > >> > >> > I
>> > >> >>>>> > >> > >> > >> > > > should be looking at? I don't see a
>> relevant
>> > >> entry
>> > >> >>>>> in my
>> > >> >>>>> > >> > >> > cloud.host
>> > >> >>>>> > >> > >> > >> > > table.
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > > Thanks!
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > > On Thu, Aug 29, 2013 at 7:56 PM, Mike
>> > >> Tutkowski <
>> > >> >>>>> > >> > >> > >> > > > mike.tutkowski@solidfire.com> wrote:
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > > > Thanks, Marty - that solved the problem!
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > > On Thu, Aug 29, 2013 at 4:56 PM, Marty
>> > Sweet
>> > >> <
>> > >> >>>>> > >> > >> > >> msweet.dev@gmail.com>
>> > >> >>>>> > >> > >> > >> > > > wrote:
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > >> Hi Mike,
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > > >> Something like this should help:
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> >
>> > >> >>>>>
>> http://en.kioskea.net/faq/809-debian-apt-get-no-pubkey-gpg-error
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > > >> Marty
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > > >> On Thursday, August 29, 2013, Mike
>> > Tutkowski
>> > >> >>>>> wrote:
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > > >> > Any thoughts on this, Wei?
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > W: GPG error:
>> > >> http://cloudstack.apt-get.euprecise
>> > >> >>>>> > >> > >> Release:
>> > >> >>>>> > >> > >> > >> The
>> > >> >>>>> > >> > >> > >> > > > >> following
>> > >> >>>>> > >> > >> > >> > > > >> > signatures couldn't be verified
>> because
>> > >> the
>> > >> >>>>> public
>> > >> >>>>> > >> key
>> > >> >>>>> > >> > is
>> > >> >>>>> > >> > >> not
>> > >> >>>>> > >> > >> > >> > > > available:
>> > >> >>>>> > >> > >> > >> > > > >> > NO_PUBKEY BBFCFE5386C278E3
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > On Thu, Aug 29, 2013 at 4:21 PM, Mike
>> > >> >>>>> Tutkowski <
>> > >> >>>>> > >> > >> > >> > > > >> > mike.tutkowski@solidfire.com> wrote:
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > > Thanks for the repo info, Wei!
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > > On Thu, Aug 29, 2013 at 4:19 PM, Wei
>> > >> ZHOU <
>> > >> >>>>> > >> > >> > >> > ustcweizhou@gmail.com>
>> > >> >>>>> > >> > >> > >> > > > >> wrote:
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> You need to add a repo, or download
>> > >> the deb
>> > >> >>>>> > files
>> > >> >>>>> > >> and
>> > >> >>>>> > >> > >> > >> install
>> > >> >>>>> > >> > >> > >> > > them.
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> > >> for CentOS/RHEL,
>> > >> >>>>> > >> > >> http://cloudstack.apt-get.eu/rhel/4.1/
>> > >> >>>>> > >> > >> > >> > > > >> > >> for Ubuntu,
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> >
>> > http://cloudstack.apt-get.eu/ubuntu/dists/precise/4.1/pool/
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> > >> 2013/8/29 Mike Tutkowski <
>> > >> >>>>> > >> > mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> > >> > Maybe I need to add a repo for
>> > >> >>>>> CloudStack? I
>> > >> >>>>> > >> didn't
>> > >> >>>>> > >> > >> see
>> > >> >>>>> > >> > >> > >> that
>> > >> >>>>> > >> > >> > >> > in
>> > >> >>>>> > >> > >> > >> > > > the
>> > >> >>>>> > >> > >> > >> > > > >> > KVM
>> > >> >>>>> > >> > >> > >> > > > >> > >> > section, but perhaps it was
>> earlier
>> > >> in the
>> > >> >>>>> > >> > >> > documentation.
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > On Thu, Aug 29, 2013 at 3:35 PM,
>> > Mike
>> > >> >>>>> > Tutkowski
>> > >> >>>>> > >> <
>> > >> >>>>> > >> > >> > >> > > > >> > >> > mike.tutkowski@solidfire.com>
>> > wrote:
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Hi,
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > For the past nine months that
>> > I've
>> > >> been
>> > >> >>>>> > >> working
>> > >> >>>>> > >> > >> with
>> > >> >>>>> > >> > >> > >> > > > CloudStack,
>> > >> >>>>> > >> > >> > >> > > > >> > I've
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > exclusively used XenServer and
>> > >> ESXi as
>> > >> >>>>> my
>> > >> >>>>> > >> hosts.
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > I am now trying out KVM and
>> > >> following
>> > >> >>>>> the
>> > >> >>>>> > >> > >> instruction
>> > >> >>>>> > >> > >> > >> here:
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > >
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >>
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >>
>> > >> >>>>> > >> >
>> > >> >>>>> > >>
>> > >> >>>>> >
>> > >> >>>>>
>> > >>
>> >
>> http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.1.1/html/Installation_Guide/hypervisor-kvm-install-flow.html
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > I am unable to install the
>> > >> >>>>> cloudstack-agent
>> > >> >>>>> > >> > >> package on
>> > >> >>>>> > >> > >> > >> my
>> > >> >>>>> > >> > >> > >> > KVM
>> > >> >>>>> > >> > >> > >> > > > >> host
>> > >> >>>>> > >> > >> > >> > > > >> > >> > (Ubuntu
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > 12.04.1), however.
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > mtutkowski@ubuntu:~$ sudo
>> > apt-get
>> > >> >>>>> install
>> > >> >>>>> > >> > >> > >> cloudstack-agent
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Reading package lists... Done
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Building dependency tree
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Reading state information...
>> Done
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > E: Unable to locate package
>> > >> >>>>> cloudstack-agent
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Any thoughts on this?
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Thanks!
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > --
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *Senior CloudStack Developer,
>> > >> SolidFire
>> > >> >>>>> > Inc.*
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > e:
>> mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > Advancing the way the world
>> uses
>> > >> the
>> > >> >>>>> cloud<
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> http://solidfire.com/solution/overview/?video=play
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > > *™*
>> > >> >>>>> > >> > >> > >> > > > >> > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >> > --
>> > >> >>>>> > >> > >> > >> > > > >> > >> > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > >> > >> > *Senior CloudStack Developer,
>> > >> SolidFire
>> > >> >>>>> Inc.*
>> > >> >>>>> > >> > >> > >> > > > >> > >> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > >> > >> > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > >> > >> > Advancing the way the world uses
>> > the
>> > >> >>>>> > >> > >> > >> > > > >> > >> > cloud<
>> > >> >>>>> > >> > >> > http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > >> > > > >> > >> > *™*
>> > >> >>>>> > >> > >> > >> > > > >> > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > >>
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> > > --
>> > >> >>>>> > >> > >> > >> > > > >> > > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > >> > > *Senior CloudStack Developer,
>> > SolidFire
>> > >> Inc.*
>> > >> >>>>> > >> > >> > >> > > > >> > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > >> > > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > >> > > Advancing the way the world uses the
>> > >> cloud<
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> http://solidfire.com/solution/overview/?video=play
>> > >> >>>>> > >
>> > >> >>>>> > >> > >> > >> > > > >> > > *™*
>> > >> >>>>> > >> > >> > >> > > > >> > >
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> >
>> > >> >>>>> > >> > >> > >> > > > >> > --
>> > >> >>>>> > >> > >> > >> > > > >> > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > >> > *Senior CloudStack Developer,
>> SolidFire
>> > >> Inc.*
>> > >> >>>>> > >> > >> > >> > > > >> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > >> > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > >> > Advancing the way the world uses the
>> > >> >>>>> > >> > >> > >> > > > >> > cloud<
>> > >> >>>>> > >> > http://solidfire.com/solution/overview/?video=play
>> > >> >>>>> > >> > >> > >> > > > >>
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > > > --
>> > >> >>>>> > >> > >> > >> > > > > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > > *Senior CloudStack Developer, SolidFire
>> > Inc.*
>> > >> >>>>> > >> > >> > >> > > > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > > Advancing the way the world uses the
>> cloud<
>> > >> >>>>> > >> > >> > >> > > >
>> > >> http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > >> > > > > *™*
>> > >> >>>>> > >> > >> > >> > > > >
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > > > --
>> > >> >>>>> > >> > >> > >> > > > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > > > *Senior CloudStack Developer, SolidFire
>> Inc.*
>> > >> >>>>> > >> > >> > >> > > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > > > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > > > Advancing the way the world uses the
>> > >> >>>>> > >> > >> > >> > > > cloud<
>> > >> >>>>> > http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > >> > > > *™*
>> > >> >>>>> > >> > >> > >> > > >
>> > >> >>>>> > >> > >> > >> > >
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >> > --
>> > >> >>>>> > >> > >> > >> > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > >> > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > >> > >> > >> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > >> > o: 303.746.7302
>> > >> >>>>> > >> > >> > >> > Advancing the way the world uses the
>> > >> >>>>> > >> > >> > >> > cloud<
>> > >> >>>>> http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > >> > *™*
>> > >> >>>>> > >> > >> > >> >
>> > >> >>>>> > >> > >> > >>
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> > > --
>> > >> >>>>> > >> > >> > > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > >> > >> > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > > o: 303.746.7302
>> > >> >>>>> > >> > >> > > Advancing the way the world uses the cloud<
>> > >> >>>>> > >> > >> > http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > > *™*
>> > >> >>>>> > >> > >> > >
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >> > --
>> > >> >>>>> > >> > >> > *Mike Tutkowski*
>> > >> >>>>> > >> > >> > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > >> > >> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > >> > o: 303.746.7302
>> > >> >>>>> > >> > >> > Advancing the way the world uses the
>> > >> >>>>> > >> > >> > cloud<
>> > >> http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > >> > *™*
>> > >> >>>>> > >> > >> >
>> > >> >>>>> > >> > >>
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> > > --
>> > >> >>>>> > >> > > *Mike Tutkowski*
>> > >> >>>>> > >> > > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > >> > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > > o: 303.746.7302
>> > >> >>>>> > >> > > Advancing the way the world uses the cloud<
>> > >> >>>>> > >> > http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > >> > > *™*
>> > >> >>>>> > >> > >
>> > >> >>>>> > >> >
>> > >> >>>>> > >> >
>> > >> >>>>> > >> >
>> > >> >>>>> > >> > --
>> > >> >>>>> > >> > *Mike Tutkowski*
>> > >> >>>>> > >> > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > >> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > >> > o: 303.746.7302
>> > >> >>>>> > >> > Advancing the way the world uses the
>> > >> >>>>> > >> > cloud<http://solidfire.com/solution/overview/?video=play
>> >
>> > >> >>>>> > >> > *™*
>> > >> >>>>> > >> >
>> > >> >>>>> > >>
>> > >> >>>>> > >
>> > >> >>>>> > >
>> > >> >>>>> > >
>> > >> >>>>> > > --
>> > >> >>>>> > > *Mike Tutkowski*
>> > >> >>>>> > > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > > o: 303.746.7302
>> > >> >>>>> > > Advancing the way the world uses the cloud<
>> > >> >>>>> > http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > > *™*
>> > >> >>>>> > >
>> > >> >>>>> >
>> > >> >>>>> >
>> > >> >>>>> >
>> > >> >>>>> > --
>> > >> >>>>> > *Mike Tutkowski*
>> > >> >>>>> > *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>>> > e: mike.tutkowski@solidfire.com
>> > >> >>>>> > o: 303.746.7302
>> > >> >>>>> > Advancing the way the world uses the
>> > >> >>>>> > cloud<http://solidfire.com/solution/overview/?video=play>
>> > >> >>>>> > *™*
>> > >> >>>>> >
>> > >> >>>>>
>> > >> >>>>
>> > >> >>>>
>> > >> >>>>
>> > >> >>>> --
>> > >> >>>> *Mike Tutkowski*
>> > >> >>>> *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>>> e: mike.tutkowski@solidfire.com
>> > >> >>>> o: 303.746.7302
>> > >> >>>> Advancing the way the world uses the cloud<
>> > >> http://solidfire.com/solution/overview/?video=play>
>> > >> >>>> *™*
>> > >> >>>>
>> > >> >>>
>> > >> >>>
>> > >> >>>
>> > >> >>> --
>> > >> >>> *Mike Tutkowski*
>> > >> >>> *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >>> e: mike.tutkowski@solidfire.com
>> > >> >>> o: 303.746.7302
>> > >> >>> Advancing the way the world uses the cloud<
>> > >> http://solidfire.com/solution/overview/?video=play>
>> > >> >>> *™*
>> > >> >>>
>> > >> >>
>> > >> >>
>> > >> >>
>> > >> >> --
>> > >> >> *Mike Tutkowski*
>> > >> >> *Senior CloudStack Developer, SolidFire Inc.*
>> > >> >> e: mike.tutkowski@solidfire.com
>> > >> >> o: 303.746.7302
>> > >> >> Advancing the way the world uses the
>> > >> >> cloud<http://solidfire.com/solution/overview/?video=play>
>> > >> >> *™*
>> > >>
>> > >
>> > >
>> > >
>> > > --
>> > > *Mike Tutkowski*
>> > > *Senior CloudStack Developer, SolidFire Inc.*
>> > > e: mike.tutkowski@solidfire.com
>> > > o: 303.746.7302
>> > > Advancing the way the world uses the cloud<
>> > http://solidfire.com/solution/overview/?video=play>
>> > > *™*
>> > >
>> >
>> >
>> >
>> > --
>> > *Mike Tutkowski*
>> > *Senior CloudStack Developer, SolidFire Inc.*
>> > e: mike.tutkowski@solidfire.com
>> > o: 303.746.7302
>> > Advancing the way the world uses the
>> > cloud<http://solidfire.com/solution/overview/?video=play>
>> > *™*
>> >
>>
>
>
>
> --
> *Mike Tutkowski*
> *Senior CloudStack Developer, SolidFire Inc.*
> e: mike.tutkowski@solidfire.com
> o: 303.746.7302
> Advancing the way the world uses the
> cloud<http://solidfire.com/solution/overview/?video=play>
> *™*

Mime
View raw message