cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Ahmad Emneina <aemne...@gmail.com>
Subject Re: 4.2 snapshot: setting up ISOs - no go
Date Thu, 30 May 2013 20:09:43 GMT
can you check the output of /var/log/cloud/cloud.out when adding the iso.
Also if youre adding the iso from an internal web server, make sure you
have secstorage.allowed.internal.sites set to the internal ip or range of
where you host those images.


On Thu, May 30, 2013 at 12:25 PM, La Motta, David
<David.LaMotta@netapp.com>wrote:

> Ok, so I took a gander at some of the suggestions on that page, and though
> I feel I am close… I am not there yet.  Just so you all have a bit of
> context how my environment is setup:
>
> I am running MS in a CentOS 6.4 VM, inside XS 61.
> Cluster XS is another 6.1 VM
> MS has a public and private (vlan) IP address
> vlan itself can't access outside world (though MS can via the public IP)
>
> When I add my ISO, the MS console still continues to spit out:
>
> WARN  [storage.download.DownloadMonitorImpl] (1292666621@qtp-1329125626-10:)
> There is no secondary storage VM for secondary storage host nfs://
> 172.20.39.74/SnapCreator_secondary
>
> Both SSVM and proxy VM are running in XS, I can ssh to SSVM and execute
> commands per the troubleshooting guide.
>
> Things that I have done since the series of messages on this thread:
>
> 1. Blew away the DB
> 2. Started with a clean Cluster XS.
> 3. MS iptables disabled
> 4. Added secstorage.allowed.internal.sites value to have my vlan CIDR (
> 172.20.39.0/24) and public network CIDR (10.63.172.0/24)
> 5. Changed host value for the MS to be the vlan IP address instead of the
> public address
> 6. Ran ssvm-check.sh and it stops short at not being able to hit DNS
> (expected, because the vlan can't connect to the 'net)
> 7. Ran service cloud status and it came back fine, everything seems to be
> running a-ok.
> 8. Primary and secondary storage remain intact on the storage controller.
>
>
> Setup zone, pod, cluster, host, primary & secondary storage.  System VMs
> are up and running.  DB says:
>
> mysql> select name,status,type from host;
> +------------------------------------------+--------+------------------+
> | name                                     | status | type             |
> +------------------------------------------+--------+------------------+
> | XenServer-CS                             | Up     | Routing          |
> | nfs://172.20.39.74/SnapCreator_secondary | Alert  | SecondaryStorage |
> +------------------------------------------+--------+------------------+
> 2 rows in set (0.00 sec)
>
> mysql> select url,download_state,error_str from template_host_ref;
>
> +-----------------------------------------------------------------------------+----------------+-----------+
> | url
>     | download_state | error_str |
>
> +-----------------------------------------------------------------------------+----------------+-----------+
> |
> http://download.cloud.com/templates/acton/acton-systemvm-02062012.qcow2.bz2| DOWNLOADED
    | NULL      |
> |
> http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2  | DOWNLOADED
    | NULL      |
> |
> http://download.cloud.com/templates/burbank/burbank-systemvm-08012012.ova  | DOWNLOADED
    | NULL      |
> |
> http://download.cloud.com/templates/acton/acton-systemvm-02062012.qcow2.bz2| DOWNLOADED
    | NULL      |
> |
> http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2  | DOWNLOADED
    | NULL      |
> |
> http://172.20.39.51/software/linux/ubuntu/ubuntu-12.04.1-desktop-i386.iso  | NOT_DOWNLOADED
| NULL      |
>
> +-----------------------------------------------------------------------------+----------------+-----------+
> 6 rows in set (0.00 sec)
>
> root@s-1-VM:/# tail -20 /var/log/cloud.log
> Thu May 30 18:02:28 UTC 2013 Enable service cloud = 1
> Thu May 30 18:39:21 UTC 2013 Executing cloud-early-config
> Thu May 30 18:39:22 UTC 2013 Detected that we are running inside xen-domU
> guest
> Thu May 30 18:39:24 UTC 2013 Setting up secondary storage system vm
> Thu May 30 18:39:24 UTC 2013 checking that eth0 has IP
> Thu May 30 18:39:25 UTC 2013 checking that eth1 has IP
> Thu May 30 18:39:25 UTC 2013 checking that eth2 has IP
> Thu May 30 18:39:34 UTC 2013 checking that eth3 has IP
> Thu May 30 18:39:34 UTC 2013 Successfully setup storage network with
> STORAGE_IP:172.20.39.6, STORAGE_NETMASK:255.255.255.0, STORAGE_CIDR:
> Thu May 30 18:39:34 UTC 2013 Setting up apache web server
> Thu May 30 18:39:34 UTC 2013 cloud: disable rp_filter
> Thu May 30 18:39:34 UTC 2013 disable rpfilter
> Thu May 30 18:39:34 UTC 2013 cloud: enable_fwding = 0
> Thu May 30 18:39:34 UTC 2013 enable_fwding = 0
> Thu May 30 18:39:34 UTC 2013 Enable service haproxy = 0
> Thu May 30 18:39:34 UTC 2013 Enable service dnsmasq = 0
> Thu May 30 18:39:34 UTC 2013 Enable service cloud-passwd-srvr = 0
> Thu May 30 18:39:35 UTC 2013 Enable service cloud = 1
> Thu May 30 18:47:35 UTC 2013 User stops cloud.com<http://cloud.com>
> service
> Thu May 30 19:04:13 UTC 2013 User stops cloud.com<http://cloud.com>
> service
>
> (I ran a service cloud restart a couple of times, per troubleshooting
> instructions)
>
> I am at a loss, but happy to try anything else…
>
>
>
> David La Motta
> Technical Marketing Engineer
> Citrix Solutions
>
> NetApp
> 919.476.5042
> dlamotta@netapp.com<mailto:dlamotta@netapp.com>
>
>
>
> On May 30, 2013, at 9:44 AM, Nitin Mehta <Nitin.Mehta@citrix.com<mailto:
> Nitin.Mehta@citrix.com>>
>  wrote:
>
> David - Can you please follow
> https://cwiki.apache.org/CLOUDSTACK/ssvm-troubleshooting.html to
> troubleshoot the issues ?
> Let us know how it goes ?
>
> On 30/05/13 7:02 PM, "La Motta, David" <David.LaMotta@netapp.com<mailto:
> David.LaMotta@netapp.com>> wrote:
>
> Hi EdisonŠ
>
> The table is empty, which would indicate the error message I see on the
> console is accurate.  However, that I see the VM running in XenServer and
> I have it listed in the Infrastructure area in CS doesn't make much sense.
>
>
>
> David La Motta
> Technical Marketing Engineer
> Citrix Solutions
>
> NetApp
> 919.476.5042
> dlamotta@netapp.com<mailto:dlamotta@netapp.com><mailto:dlamotta@netapp.com
> >
>
>
>
> On May 29, 2013, at 5:41 PM, Edison Su
> <Edison.su@citrix.com<mailto:Edison.su@citrix.com><mailto:
> Edison.su@citrix.com>>
> wrote:
>
> Can you try:
> select status from host where type = 'SecondaryStorageVM';
> in db?
>
> Make sure the agent in ssvm can connect back to mgt serer.
>
> -----Original Message-----
> From: La Motta, David [mailto:David.LaMotta@netapp.com<http://netapp.com><
> http://netapp.com>]
> Sent: Wednesday, May 29, 2013 2:28 PM
> To: <dev@cloudstack.apache.org<mailto:dev@cloudstack.apache.org><mailto:
> dev@cloudstack.apache.org>>
> Subject: 4.2 snapshot: setting up ISOs - no go
>
> So my 4.2 instance is up and running, system VMs are running (secondary
> storage VM and console proxy VM), primary and secondary storage are up
> on NFS... all things considered and at a glance, things look good.
> However,
> when I try to add an ISO so that I can provision a VM, I am getting:
>
> WARN  [storage.download.DownloadMonitorImpl] (1018141210@qtp-
> 2013781391-38:) There is no secondary storage VM for secondary storage
> host nfs://172.20.39.74/SnapCreator_secondary
>
> Which is throwing me off, because the secondary storage VM seems to be
> up and happy.  I can see it on XenCenter alive and well, too.  When I go
> through the ISO registration wizard, registration seems to be successful
> in
> the UI, since the ISOs get added to the templates table--except I get the
> warning in the console above.
>
> If I try to add another secondary storage, I get:
>
> ERROR [cloud.api.ApiServer] (1260872222@qtp-2013781391-40:) unhandled
> exception executing api command: addSecondaryStorage
> com.cloud.utils.exception.CloudRuntimeException: Cannot transit agent
> status with event AgentDisconnected for host 9, mangement server id is
> 271423992217301,Unable to transition to a new state from Creating via
> AgentDisconnected at
> com.cloud.agent.manager.AgentManagerImpl.agentStatusTransitTo(Agent
> ManagerImpl.java:1436)
>
>
> When in doubt, reboot, right?  So I shutdown my CS mgmt server and
> XenServer host and tried again.  I even added more secondary storage
> without anything in it (the first NFS volume had the system VM template on
> it).  Still, I get the same behavior as described above:  the UI says the
> ISO was
> added, but the log file warns about the lack of a secondary storage VM.
>
> If I attempt to go through the instance provisioning wizard, long and
> behold,
> the ISO is not listed in the "My ISOs" tab.
>
>
> There is also something strange that I've noticed (slightly off topic):
> if I have
> primary storage allocated and resize the underlying volume on the storage
> controller, CS doesn't see the new size.  Is there any way to force that
> to take
> place from the UI?  Clicking on refresh did nothing about it.
>
> Thanks!
>
>
>
> David La Motta
> Technical Marketing Engineer - Citrix
>
> NetApp
> 919.476.5042
> dlamotta@netapp.com<mailto:dlamotta@netapp.com><mailto:dlamotta@netapp.com
> ><mailto:dlamotta@netapp.com
>
>
>
>
>
>
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message