cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [8/9] break file into chapters
Date Mon, 27 Jan 2014 21:12:13 GMT
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-install/blob/b1401796/source/concepts.rst
----------------------------------------------------------------------
diff --git a/source/concepts.rst b/source/concepts.rst
new file mode 100644
index 0000000..ad60013
--- /dev/null
+++ b/source/concepts.rst
@@ -0,0 +1,313 @@
+.. Licensed to the Apache Software Foundation (ASF) under one
+   or more contributor license agreements.  See the NOTICE file
+   distributed with this work for additional information#
+   regarding copyright ownership.  The ASF licenses this file
+   to you under the Apache License, Version 2.0 (the
+   "License"); you may not use this file except in compliance
+   with the License.  You may obtain a copy of the License at
+   http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing,
+   software distributed under the License is distributed on an
+   "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+   KIND, either express or implied.  See the License for the
+   specific language governing permissions and limitations
+   under the License.
+
+Concepts
+========
+
+What Is CloudStack?
+-------------------
+
+CloudStack is an open source software platform that pools computing
+resources to build public, private, and hybrid Infrastructure as a
+Service (IaaS) clouds. CloudStack manages the network, storage, and
+compute nodes that make up a cloud infrastructure. Use CloudStack to
+deploy, manage, and configure cloud computing environments.
+
+Typical users are service providers and enterprises. With CloudStack,
+you can:
+
+-  
+
+   Set up an on-demand, elastic cloud computing service. Service
+   providers can sell self service virtual machine instances, storage
+   volumes, and networking configurations over the Internet.
+
+-  
+
+   Set up an on-premise private cloud for use by employees. Rather than
+   managing virtual machines in the same way as physical machines, with
+   CloudStack an enterprise can offer self-service virtual machines to
+   users without involving IT departments.
+
+|1000-foot-view.png: Overview of CloudStack|
+
+What Can CloudStack Do?
+-----------------------
+
+**Multiple Hypervisor Support**
+
+CloudStack works with a variety of hypervisors, and a single cloud
+deployment can contain multiple hypervisor implementations. The current
+release of CloudStack supports pre-packaged enterprise solutions like
+Citrix XenServer and VMware vSphere, as well as KVM or Xen running on
+Ubuntu or CentOS.
+
+**Massively Scalable Infrastructure Management**
+
+CloudStack can manage tens of thousands of servers installed in multiple
+geographically distributed datacenters. The centralized management
+server scales linearly, eliminating the need for intermediate
+cluster-level management servers. No single component failure can cause
+a cloud-wide outage. Periodic maintenance of the management server can
+be performed without affecting the functioning of virtual machines
+running in the cloud.
+
+**Automatic Configuration Management**
+
+CloudStack automatically configures each guest virtual machine’s
+networking and storage settings.
+
+CloudStack internally manages a pool of virtual appliances to support
+the cloud itself. These appliances offer services such as firewalling,
+routing, DHCP, VPN access, console proxy, storage access, and storage
+replication. The extensive use of virtual appliances simplifies the
+installation, configuration, and ongoing management of a cloud
+deployment.
+
+**Graphical User Interface**
+
+CloudStack offers an administrator's Web interface, used for
+provisioning and managing the cloud, as well as an end-user's Web
+interface, used for running VMs and managing VM templates. The UI can be
+customized to reflect the desired service provider or enterprise look
+and feel.
+
+**API and Extensibility**
+
+CloudStack provides an API that gives programmatic access to all the
+management features available in the UI. The API is maintained and
+documented. This API enables the creation of command line tools and new
+user interfaces to suit particular needs. See the Developer’s Guide and
+API Reference, both available at `Apache CloudStack
+Guides <http://cloudstack.apache.org/docs/en-US/index.html>`__ and
+`Apache CloudStack API
+Reference <http://cloudstack.apache.org/docs/api/index.html>`__
+respectively.
+
+The CloudStack pluggable allocation architecture allows the creation of
+new types of allocators for the selection of storage and Hosts. See the
+Allocator Implementation Guide
+(`http://docs.cloudstack.org/CloudStack\_Documentation/Allocator\_Implementation\_Guide <http://docs.cloudstack.org/CloudStack_Documentation/Allocator_Implementation_Guide>`__).
+
+**High Availability**
+
+CloudStack has a number of features to increase the availability of the
+system. The Management Server itself may be deployed in a multi-node
+installation where the servers are load balanced. MySQL may be
+configured to use replication to provide for a manual failover in the
+event of database loss. For the hosts, CloudStack supports NIC bonding
+and the use of separate networks for storage as well as iSCSI Multipath.
+
+Deployment Architecture Overview
+--------------------------------
+
+A CloudStack installation consists of two parts: the Management Server
+and the cloud infrastructure that it manages. When you set up and manage
+a CloudStack cloud, you provision resources such as hosts, storage
+devices, and IP addresses into the Management Server, and the Management
+Server manages those resources.
+
+The minimum production installation consists of one machine running the
+CloudStack Management Server and another machine to act as the cloud
+infrastructure (in this case, a very simple infrastructure consisting of
+one host running hypervisor software). In its smallest deployment, a
+single machine can act as both the Management Server and the hypervisor
+host (using the KVM hypervisor).
+
+|basic-deployment.png: Basic two-machine deployment|
+
+A more full-featured installation consists of a highly-available
+multi-node Management Server installation and up to tens of thousands of
+hosts using any of several advanced networking setups. For information
+about deployment options, see the "Choosing a Deployment Architecture"
+section of the CloudStack Installation Guide.
+
+Management Server Overview
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Management Server is the CloudStack software that manages cloud
+resources. By interacting with the Management Server through its UI or
+API, you can configure and manage your cloud infrastructure.
+
+The Management Server runs on a dedicated server or VM. It controls
+allocation of virtual machines to hosts and assigns storage and IP
+addresses to the virtual machine instances. The Management Server runs
+in a Tomcat container and requires a MySQL database for persistence.
+
+The machine must meet the system requirements described in System
+Requirements.
+
+The Management Server:
+
+-  
+
+   Provides the web user interface for the administrator and a reference
+   user interface for end users.
+
+-  
+
+   Provides the APIs for CloudStack.
+
+-  
+
+   Manages the assignment of guest VMs to particular hosts.
+
+-  
+
+   Manages the assignment of public and private IP addresses to
+   particular accounts.
+
+-  
+
+   Manages the allocation of storage to guests as virtual disks.
+
+-  
+
+   Manages snapshots, templates, and ISO images, possibly replicating
+   them across data centers.
+
+-  
+
+   Provides a single point of configuration for the cloud.
+
+Cloud Infrastructure Overview
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Management Server manages one or more zones (typically, datacenters)
+containing host computers where guest virtual machines will run. The
+cloud infrastructure is organized as follows:
+
+-  
+
+   Zone: Typically, a zone is equivalent to a single datacenter. A zone
+   consists of one or more pods and secondary storage.
+
+-  
+
+   Pod: A pod is usually one rack of hardware that includes a layer-2
+   switch and one or more clusters.
+
+-  
+
+   Cluster: A cluster consists of one or more hosts and primary storage.
+
+-  
+
+   Host: A single compute node within a cluster. The hosts are where the
+   actual cloud services run in the form of guest virtual machines.
+
+-  
+
+   Primary storage is associated with a cluster, and it stores the disk
+   volumes for all the VMs running on hosts in that cluster.
+
+-  
+
+   Secondary storage is associated with a zone, and it stores templates,
+   ISO images, and disk volume snapshots.
+
+|infrastructure_overview.png: Nested organization of a zone|
+
+**More Information**
+
+For more information, see documentation on cloud infrastructure
+concepts.
+
+Networking Overview
+~~~~~~~~~~~~~~~~~~~
+
+CloudStack offers two types of networking scenario:
+
+-  
+
+   Basic. For AWS-style networking. Provides a single network where
+   guest isolation can be provided through layer-3 means such as
+   security groups (IP address source filtering).
+
+-  
+
+   Advanced. For more sophisticated network topologies. This network
+   model provides the most flexibility in defining guest networks.
+
+.. |1000-foot-view.png: Overview of CloudStack| image:: ./_static/images/1000-foot-view.png
+.. |basic-deployment.png: Basic two-machine deployment| image:: ./_static/images/basic-deployment.png
+.. |infrastructure_overview.png: Nested organization of a zone| image:: ./_static/images/infrastructure-overview.png
+.. |region-overview.png: Nested structure of a region.| image:: ./_static/images/region-overview.png
+.. |zone-overview.png: Nested structure of a simple zone.| image:: ./_static/images/zone-overview.png
+.. |pod-overview.png: Nested structure of a simple pod| image:: ./_static/images/pod-overview.png
+.. |cluster-overview.png: Structure of a simple cluster| image:: ./_static/images/cluster-overview.png
+.. |installation-complete.png: Finished installs with single Management Server and multiple
Management Servers| image:: ./_static/images/installation-complete.png
+.. |change-password.png: button to change a user's password| image:: ./_static/images/change-password.png
+.. |provisioning-overview.png: Conceptual overview of a basic deployment| image:: ./_static/images/provisioning-overview.png
+.. |vsphereclient.png: vSphere client| image:: ./_static/images/vsphere-client.png
+.. |addcluster.png: add a cluster| image:: ./_static/images/add-cluster.png
+.. |ConsoleButton.png: button to launch a console| image:: ./_static/images/console-icon.png
+.. |DeleteButton.png: button to delete dvSwitch| image:: ./_static/images/delete-button.png
+.. |vds-name.png: Name of the dvSwitch as specified in the vCenter.| image:: ./_static/images/vds-name.png
+.. |traffic-type.png: virtual switch type| image:: ./_static/images/traffic-type.png
+.. |dvSwitchConfig.png: Configuring dvSwitch| image:: ./_static/images/dvSwitch-config.png
+.. |Small-Scale Deployment| image:: ./_static/images/small-scale-deployment.png
+.. |Large-Scale Redundant Setup| image:: ./_static/images/large-scale-redundant-setup.png
+.. |Multi-Node Management Server| image:: ./_static/images/multi-node-management-server.png
+.. |Example Of A Multi-Site Deployment| image:: ./_static/images/multi-site-deployment.png
+.. |Separate Storage Network| image:: ./_static/images/separate-storage-network.png
+.. |NIC Bonding And Multipath I/O| image:: ./_static/images/nic-bonding-and-multipath-io.png
+.. |Use the GUI to set the configuration variable to true| image:: ./_static/images/ec2-s3-configuration.png
+.. |Use the GUI to set the name of a compute service offering to an EC2 instance type API
name.| image:: ./_static/images/compute-service-offerings.png
+.. |parallel-mode.png: adding a firewall and load balancer in parallel mode.| image:: ./_static/images/parallel-mode.png
+.. |guest-traffic-setup.png: Depicts a guest traffic setup| image:: ./_static/images/guest-traffic-setup.png
+.. |networksinglepod.png: diagram showing logical view of network in a pod| image:: ./_static/images/network-singlepod.png
+.. |networksetupzone.png: Depicts network setup in a single zone| image:: ./_static/images/network-setup-zone.png
+.. |addguestnetwork.png: Add Guest network setup in a single zone| image:: ./_static/images/add-guest-network.png
+.. |remove-nic.png: button to remove a NIC| image:: ./_static/images/remove-nic.png
+.. |set-default-nic.png: button to set a NIC as default one.| image:: ./_static/images/set-default-nic.png
+.. |EditButton.png: button to edit a network| image:: ./_static/images/edit-icon.png
+.. |edit-icon.png: button to edit a network| image:: ./_static/images/edit-icon.png
+.. |addAccount-icon.png: button to assign an IP range to an account.| image:: ./_static/images/addAccount-icon.png
+.. |eip-ns-basiczone.png: Elastic IP in a NetScaler-enabled Basic Zone.| image:: ./_static/images/eip-ns-basiczone.png
+.. |add-ip-range.png: adding an IP range to a network.| image:: ./_static/images/add-ip-range.png
+.. |httpaccess.png: allows inbound HTTP access from anywhere| image:: ./_static/images/http-access.png
+.. |autoscaleateconfig.png: Configuring AutoScale| image:: ./_static/images/autoscale-config.png
+.. |EnableDisable.png: button to enable or disable AutoScale.| image:: ./_static/images/enable-disable-autoscale.png
+.. |gslb.png: GSLB architecture| image:: ./_static/images/gslb.png
+.. |gslb-add.png: adding a gslb rule| image:: ./_static/images/add-gslb.png
+.. |ReleaseIPButton.png: button to release an IP| image:: ./_static/images/release-ip-icon.png
+.. |EnableNATButton.png: button to enable NAT| image:: ./_static/images/enable-disable.png
+.. |egress-firewall-rule.png: adding an egress firewall rule| image:: ./_static/images/egress-firewall-rule.png
+.. |AttachDiskButton.png: button to attach a volume| image:: ./_static/images/vpn-icon.png
+.. |vpn-icon.png: button to enable VPN| image:: ./_static/images/vpn-icon.png
+.. |addvpncustomergateway.png: adding a customer gateway.| image:: ./_static/images/add-vpn-customer-gateway.png
+.. |edit.png: button to edit a VPN customer gateway| image:: ./_static/images/edit-icon.png
+.. |delete.png: button to remove a VPN customer gateway| image:: ./_static/images/delete-button.png
+.. |createvpnconnection.png: creating a VPN connection to the customer gateway.| image::
./_static/images/create-vpn-connection.png
+.. |remove-vpn.png: button to remove a VPN connection| image:: ./_static/images/remove-vpn.png
+.. |reset-vpn.png: button to reset a VPN connection| image:: ./_static/images/reset-vpn.png
+.. |mutltier.png: a multi-tier setup.| image:: ./_static/images/multi-tier-app.png
+.. |add-vpc.png: adding a vpc.| image:: ./_static/images/add-vpc.png
+.. |add-tier.png: adding a tier to a vpc.| image:: ./_static/images/add-tier.png
+.. |replace-acl-icon.png: button to replace an ACL list| image:: ./_static/images/replace-acl-icon.png
+.. |add-new-gateway-vpc.png: adding a private gateway for the VPC.| image:: ./_static/images/add-new-gateway-vpc.png
+.. |replace-acl-icon.png: button to replace the default ACL behaviour.| image:: ./_static/images/replace-acl-icon.png
+.. |add-vm-vpc.png: adding a VM to a vpc.| image:: ./_static/images/add-vm-vpc.png
+.. |addvm-tier-sharednw.png: adding a VM to a VPC tier and shared network.| image:: ./_static/images/addvm-tier-sharednw.png
+.. |release-ip-icon.png: button to release an IP.| image:: ./_static/images/release-ip-icon.png
+.. |enable-disable.png: button to enable Static NAT.| image:: ./_static/images/enable-disable.png
+.. |select-vmstatic-nat.png: selecting a tier to apply staticNAT.| image:: ./_static/images/select-vm-staticnat-vpc.png
+.. |vpc-lb.png: Configuring internal LB for VPC| image:: ./_static/images/vpc-lb.png
+.. |del-tier.png: button to remove a tier| image:: ./_static/images/del-tier.png
+.. |remove-vpc.png: button to remove a VPC| image:: ./_static/images/remove-vpc.png
+.. |edit-icon.png: button to edit a VPC| image:: ./_static/images/edit-icon.png
+.. |restart-vpc.png: button to restart a VPC| image:: ./_static/images/restart-vpc.png

http://git-wip-us.apache.org/repos/asf/cloudstack-docs-install/blob/b1401796/source/config_params.rst
----------------------------------------------------------------------
diff --git a/source/config_params.rst b/source/config_params.rst
new file mode 100644
index 0000000..fd34de1
--- /dev/null
+++ b/source/config_params.rst
@@ -0,0 +1,445 @@
+.. Licensed to the Apache Software Foundation (ASF) under one
+   or more contributor license agreements.  See the NOTICE file
+   distributed with this work for additional information#
+   regarding copyright ownership.  The ASF licenses this file
+   to you under the Apache License, Version 2.0 (the
+   "License"); you may not use this file except in compliance
+   with the License.  You may obtain a copy of the License at
+   http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing,
+   software distributed under the License is distributed on an
+   "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+   KIND, either express or implied.  See the License for the
+   specific language governing permissions and limitations
+   under the License.
+
+Configuration Parameters
+========================
+
+About Configuration Parameters
+------------------------------
+
+CloudStack provides a variety of settings you can use to set limits,
+configure features, and enable or disable features in the cloud. Once
+your Management Server is running, you might need to set some of these
+configuration parameters, depending on what optional features you are
+setting up. You can set default values at the global level, which will
+be in effect throughout the cloud unless you override them at a lower
+level. You can make local settings, which will override the global
+configuration parameter values, at the level of an account, zone,
+cluster, or primary storage.
+
+The documentation for each CloudStack feature should direct you to the
+names of the applicable parameters. The following table shows a few of
+the more useful parameters.
+
+Field
+
+Value
+
+management.network.cidr
+
+A CIDR that describes the network that the management CIDRs reside on.
+This variable must be set for deployments that use vSphere. It is
+recommended to be set for other deployments as well. Example:
+192.168.3.0/24.
+
+xen.setup.multipath
+
+For XenServer nodes, this is a true/false variable that instructs
+CloudStack to enable iSCSI multipath on the XenServer Hosts when they
+are added. This defaults to false. Set it to true if you would like
+CloudStack to enable multipath.
+
+If this is true for a NFS-based deployment multipath will still be
+enabled on the XenServer host. However, this does not impact NFS
+operation and is harmless.
+
+secstorage.allowed.internal.sites
+
+This is used to protect your internal network from rogue attempts to
+download arbitrary files using the template download feature. This is a
+comma-separated list of CIDRs. If a requested URL matches any of these
+CIDRs the Secondary Storage VM will use the private network interface to
+fetch the URL. Other URLs will go through the public interface. We
+suggest you set this to 1 or 2 hardened internal machines where you keep
+your templates. For example, set it to 192.168.1.66/32.
+
+use.local.storage
+
+Determines whether CloudStack will use storage that is local to the Host
+for data disks, templates, and snapshots. By default CloudStack will not
+use this storage. You should change this to true if you want to use
+local storage and you understand the reliability and feature drawbacks
+to choosing local storage.
+
+host
+
+This is the IP address of the Management Server. If you are using
+multiple Management Servers you should enter a load balanced IP address
+that is reachable via the private network.
+
+default.page.size
+
+Maximum number of items per page that can be returned by a CloudStack
+API command. The limit applies at the cloud level and can vary from
+cloud to cloud. You can override this with a lower value on a particular
+API call by using the page and pagesize API command parameters. For more
+information, see the Developer's Guide. Default: 500.
+
+ha.tag
+
+The label you want to use throughout the cloud to designate certain
+hosts as dedicated HA hosts. These hosts will be used only for
+HA-enabled VMs that are restarting due to the failure of another host.
+For example, you could set this to ha\_host. Specify the ha.tag value as
+a host tag when you add a new host to the cloud.
+
+vmware.vcenter.session.timeout
+
+Determines the vCenter session timeout value by using this parameter.
+The default value is 20 minutes. Increase the timeout value to avoid
+timeout errors in VMware deployments because certain VMware operations
+take more than 20 minutes.
+
+Setting Global Configuration Parameters
+---------------------------------------
+
+Use the following steps to set global configuration parameters. These
+values will be the defaults in effect throughout your CloudStack
+deployment.
+
+#. 
+
+   Log in to the UI as administrator.
+
+#. 
+
+   In the left navigation bar, click Global Settings.
+
+#. 
+
+   In Select View, choose one of the following:
+
+   -  
+
+      Global Settings. This displays a list of the parameters with brief
+      descriptions and current values.
+
+   -  
+
+      Hypervisor Capabilities. This displays a list of hypervisor
+      versions with the maximum number of guests supported for each.
+
+#. 
+
+   Use the search box to narrow down the list to those you are
+   interested in.
+
+#. 
+
+   In the Actions column, click the Edit icon to modify a value. If you
+   are viewing Hypervisor Capabilities, you must click the name of the
+   hypervisor first to display the editing screen.
+
+Setting Local Configuration Parameters
+--------------------------------------
+
+Use the following steps to set local configuration parameters for an
+account, zone, cluster, or primary storage. These values will override
+the global configuration settings.
+
+#. 
+
+   Log in to the UI as administrator.
+
+#. 
+
+   In the left navigation bar, click Infrastructure or Accounts,
+   depending on where you want to set a value.
+
+#. 
+
+   Find the name of the particular resource that you want to work with.
+   For example, if you are in Infrastructure, click View All on the
+   Zones, Clusters, or Primary Storage area.
+
+#. 
+
+   Click the name of the resource where you want to set a limit.
+
+#. 
+
+   Click the Settings tab.
+
+#. 
+
+   Use the search box to narrow down the list to those you are
+   interested in.
+
+#. 
+
+   In the Actions column, click the Edit icon to modify a value.
+
+Granular Global Configuration Parameters
+----------------------------------------
+
+The following global configuration parameters have been made more
+granular. The parameters are listed under three different scopes:
+account, cluster, and zone.
+
+Field
+
+Field
+
+Value
+
+account
+
+remote.access.vpn.client.iprange
+
+The range of IPs to be allocated to remotely access the VPN clients. The
+first IP in the range is used by the VPN server.
+
+account
+
+allow.public.user.templates
+
+If false, users will not be able to create public templates.
+
+account
+
+use.system.public.ips
+
+If true and if an account has one or more dedicated public IP ranges,
+IPs are acquired from the system pool after all the IPs dedicated to the
+account have been consumed.
+
+account
+
+use.system.guest.vlans
+
+If true and if an account has one or more dedicated guest VLAN ranges,
+VLANs are allocated from the system pool after all the VLANs dedicated
+to the account have been consumed.
+
+cluster
+
+cluster.storage.allocated.capacity.notificationthreshold
+
+The percentage, as a value between 0 and 1, of allocated storage
+utilization above which alerts are sent that the storage is below the
+threshold.
+
+cluster
+
+cluster.storage.capacity.notificationthreshold
+
+The percentage, as a value between 0 and 1, of storage utilization above
+which alerts are sent that the available storage is below the threshold.
+
+cluster
+
+cluster.cpu.allocated.capacity.notificationthreshold
+
+The percentage, as a value between 0 and 1, of cpu utilization above
+which alerts are sent that the available CPU is below the threshold.
+
+cluster
+
+cluster.memory.allocated.capacity.notificationthreshold
+
+The percentage, as a value between 0 and 1, of memory utilization above
+which alerts are sent that the available memory is below the threshold.
+
+cluster
+
+cluster.cpu.allocated.capacity.disablethreshold
+
+The percentage, as a value between 0 and 1, of CPU utilization above
+which allocators will disable that cluster from further usage. Keep the
+corresponding notification threshold lower than this value to be
+notified beforehand.
+
+cluster
+
+cluster.memory.allocated.capacity.disablethreshold
+
+The percentage, as a value between 0 and 1, of memory utilization above
+which allocators will disable that cluster from further usage. Keep the
+corresponding notification threshold lower than this value to be
+notified beforehand.
+
+cluster
+
+cpu.overprovisioning.factor
+
+Used for CPU over-provisioning calculation; the available CPU will be
+the mathematical product of actualCpuCapacity and
+cpu.overprovisioning.factor.
+
+cluster
+
+mem.overprovisioning.factor
+
+Used for memory over-provisioning calculation.
+
+cluster
+
+vmware.reserve.cpu
+
+Specify whether or not to reserve CPU when not over-provisioning; In
+case of CPU over-provisioning, CPU is always reserved.
+
+cluster
+
+vmware.reserve.mem
+
+Specify whether or not to reserve memory when not over-provisioning; In
+case of memory over-provisioning memory is always reserved.
+
+zone
+
+pool.storage.allocated.capacity.disablethreshold
+
+The percentage, as a value between 0 and 1, of allocated storage
+utilization above which allocators will disable that pool because the
+available allocated storage is below the threshold.
+
+zone
+
+pool.storage.capacity.disablethreshold
+
+The percentage, as a value between 0 and 1, of storage utilization above
+which allocators will disable the pool because the available storage
+capacity is below the threshold.
+
+zone
+
+storage.overprovisioning.factor
+
+Used for storage over-provisioning calculation; available storage will
+be the mathematical product of actualStorageSize and
+storage.overprovisioning.factor.
+
+zone
+
+network.throttling.rate
+
+Default data transfer rate in megabits per second allowed in a network.
+
+zone
+
+guest.domain.suffix
+
+Default domain name for VMs inside a virtual networks with a router.
+
+zone
+
+router.template.xen
+
+Name of the default router template on Xenserver.
+
+zone
+
+router.template.kvm
+
+Name of the default router template on KVM.
+
+zone
+
+router.template.vmware
+
+Name of the default router template on VMware.
+
+zone
+
+enable.dynamic.scale.vm
+
+Enable or diable dynamically scaling of a VM.
+
+zone
+
+use.external.dns
+
+Bypass internal DNS, and use the external DNS1 and DNS2
+
+zone
+
+blacklisted.routes
+
+Routes that are blacklisted cannot be used for creating static routes
+for a VPC Private Gateway.
+
+
+
+.. |1000-foot-view.png: Overview of CloudStack| image:: ./_static/images/1000-foot-view.png
+.. |basic-deployment.png: Basic two-machine deployment| image:: ./_static/images/basic-deployment.png
+.. |infrastructure_overview.png: Nested organization of a zone| image:: ./_static/images/infrastructure-overview.png
+.. |region-overview.png: Nested structure of a region.| image:: ./_static/images/region-overview.png
+.. |zone-overview.png: Nested structure of a simple zone.| image:: ./_static/images/zone-overview.png
+.. |pod-overview.png: Nested structure of a simple pod| image:: ./_static/images/pod-overview.png
+.. |cluster-overview.png: Structure of a simple cluster| image:: ./_static/images/cluster-overview.png
+.. |installation-complete.png: Finished installs with single Management Server and multiple
Management Servers| image:: ./_static/images/installation-complete.png
+.. |change-password.png: button to change a user's password| image:: ./_static/images/change-password.png
+.. |provisioning-overview.png: Conceptual overview of a basic deployment| image:: ./_static/images/provisioning-overview.png
+.. |vsphereclient.png: vSphere client| image:: ./_static/images/vsphere-client.png
+.. |addcluster.png: add a cluster| image:: ./_static/images/add-cluster.png
+.. |ConsoleButton.png: button to launch a console| image:: ./_static/images/console-icon.png
+.. |DeleteButton.png: button to delete dvSwitch| image:: ./_static/images/delete-button.png
+.. |vds-name.png: Name of the dvSwitch as specified in the vCenter.| image:: ./_static/images/vds-name.png
+.. |traffic-type.png: virtual switch type| image:: ./_static/images/traffic-type.png
+.. |dvSwitchConfig.png: Configuring dvSwitch| image:: ./_static/images/dvSwitch-config.png
+.. |Small-Scale Deployment| image:: ./_static/images/small-scale-deployment.png
+.. |Large-Scale Redundant Setup| image:: ./_static/images/large-scale-redundant-setup.png
+.. |Multi-Node Management Server| image:: ./_static/images/multi-node-management-server.png
+.. |Example Of A Multi-Site Deployment| image:: ./_static/images/multi-site-deployment.png
+.. |Separate Storage Network| image:: ./_static/images/separate-storage-network.png
+.. |NIC Bonding And Multipath I/O| image:: ./_static/images/nic-bonding-and-multipath-io.png
+.. |Use the GUI to set the configuration variable to true| image:: ./_static/images/ec2-s3-configuration.png
+.. |Use the GUI to set the name of a compute service offering to an EC2 instance type API
name.| image:: ./_static/images/compute-service-offerings.png
+.. |parallel-mode.png: adding a firewall and load balancer in parallel mode.| image:: ./_static/images/parallel-mode.png
+.. |guest-traffic-setup.png: Depicts a guest traffic setup| image:: ./_static/images/guest-traffic-setup.png
+.. |networksinglepod.png: diagram showing logical view of network in a pod| image:: ./_static/images/network-singlepod.png
+.. |networksetupzone.png: Depicts network setup in a single zone| image:: ./_static/images/network-setup-zone.png
+.. |addguestnetwork.png: Add Guest network setup in a single zone| image:: ./_static/images/add-guest-network.png
+.. |remove-nic.png: button to remove a NIC| image:: ./_static/images/remove-nic.png
+.. |set-default-nic.png: button to set a NIC as default one.| image:: ./_static/images/set-default-nic.png
+.. |EditButton.png: button to edit a network| image:: ./_static/images/edit-icon.png
+.. |edit-icon.png: button to edit a network| image:: ./_static/images/edit-icon.png
+.. |addAccount-icon.png: button to assign an IP range to an account.| image:: ./_static/images/addAccount-icon.png
+.. |eip-ns-basiczone.png: Elastic IP in a NetScaler-enabled Basic Zone.| image:: ./_static/images/eip-ns-basiczone.png
+.. |add-ip-range.png: adding an IP range to a network.| image:: ./_static/images/add-ip-range.png
+.. |httpaccess.png: allows inbound HTTP access from anywhere| image:: ./_static/images/http-access.png
+.. |autoscaleateconfig.png: Configuring AutoScale| image:: ./_static/images/autoscale-config.png
+.. |EnableDisable.png: button to enable or disable AutoScale.| image:: ./_static/images/enable-disable-autoscale.png
+.. |gslb.png: GSLB architecture| image:: ./_static/images/gslb.png
+.. |gslb-add.png: adding a gslb rule| image:: ./_static/images/add-gslb.png
+.. |ReleaseIPButton.png: button to release an IP| image:: ./_static/images/release-ip-icon.png
+.. |EnableNATButton.png: button to enable NAT| image:: ./_static/images/enable-disable.png
+.. |egress-firewall-rule.png: adding an egress firewall rule| image:: ./_static/images/egress-firewall-rule.png
+.. |AttachDiskButton.png: button to attach a volume| image:: ./_static/images/vpn-icon.png
+.. |vpn-icon.png: button to enable VPN| image:: ./_static/images/vpn-icon.png
+.. |addvpncustomergateway.png: adding a customer gateway.| image:: ./_static/images/add-vpn-customer-gateway.png
+.. |edit.png: button to edit a VPN customer gateway| image:: ./_static/images/edit-icon.png
+.. |delete.png: button to remove a VPN customer gateway| image:: ./_static/images/delete-button.png
+.. |createvpnconnection.png: creating a VPN connection to the customer gateway.| image::
./_static/images/create-vpn-connection.png
+.. |remove-vpn.png: button to remove a VPN connection| image:: ./_static/images/remove-vpn.png
+.. |reset-vpn.png: button to reset a VPN connection| image:: ./_static/images/reset-vpn.png
+.. |mutltier.png: a multi-tier setup.| image:: ./_static/images/multi-tier-app.png
+.. |add-vpc.png: adding a vpc.| image:: ./_static/images/add-vpc.png
+.. |add-tier.png: adding a tier to a vpc.| image:: ./_static/images/add-tier.png
+.. |replace-acl-icon.png: button to replace an ACL list| image:: ./_static/images/replace-acl-icon.png
+.. |add-new-gateway-vpc.png: adding a private gateway for the VPC.| image:: ./_static/images/add-new-gateway-vpc.png
+.. |replace-acl-icon.png: button to replace the default ACL behaviour.| image:: ./_static/images/replace-acl-icon.png
+.. |add-vm-vpc.png: adding a VM to a vpc.| image:: ./_static/images/add-vm-vpc.png
+.. |addvm-tier-sharednw.png: adding a VM to a VPC tier and shared network.| image:: ./_static/images/addvm-tier-sharednw.png
+.. |release-ip-icon.png: button to release an IP.| image:: ./_static/images/release-ip-icon.png
+.. |enable-disable.png: button to enable Static NAT.| image:: ./_static/images/enable-disable.png
+.. |select-vmstatic-nat.png: selecting a tier to apply staticNAT.| image:: ./_static/images/select-vm-staticnat-vpc.png
+.. |vpc-lb.png: Configuring internal LB for VPC| image:: ./_static/images/vpc-lb.png
+.. |del-tier.png: button to remove a tier| image:: ./_static/images/del-tier.png
+.. |remove-vpc.png: button to remove a VPC| image:: ./_static/images/remove-vpc.png
+.. |edit-icon.png: button to edit a VPC| image:: ./_static/images/edit-icon.png
+.. |restart-vpc.png: button to restart a VPC| image:: ./_static/images/restart-vpc.png


Mime
View raw message