cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [1/7] CLOUDSTACK-1516: Added ko-KR po files from shibaboy@gmail.com
Date Wed, 20 Mar 2013 22:00:58 GMT
Updated Branches:
  refs/heads/4.1 6e7d4196a -> dd671814c


http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/dd671814/docs/ko-KR/vmware-install.po
----------------------------------------------------------------------
diff --git a/docs/ko-KR/vmware-install.po b/docs/ko-KR/vmware-install.po
new file mode 100644
index 0000000..29ae70c
--- /dev/null
+++ b/docs/ko-KR/vmware-install.po
@@ -0,0 +1,717 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Docs\n"
+"POT-Creation-Date: 2013-03-19T13:38:05\n"
+"PO-Revision-Date: 2013-02-02 20:50+0000\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ko_KR\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#. Tag: title
+#, no-c-format
+msgid "VMware vSphere Installation and Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"If you want to use the VMware vSphere hypervisor to run guest virtual "
+"machines, install vSphere on the host(s) in your cloud."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Preparation Checklist for VMware"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"For a smoother installation, gather the following information before you "
+"start:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Information listed in <xref linkend=\"vmware-vcenter-checklist\" />"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Information listed in <xref linkend=\"vmware-network-checklist\" />"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "vCenter Checklist"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You will need the following information about vCenter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Requirement"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Value"
+msgstr "값"
+
+#. Tag: para
+#, no-c-format
+msgid "Notes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter User"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This user must have admin privileges."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter User Password"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Password for the above user."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Datacenter Name"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Name of the datacenter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Cluster Name"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Name of the cluster."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Networking Checklist for VMware"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You will need the following information about VLAN."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN Information"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN on which all your ESXi hypervisors reside."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXI VLAN IP Address"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"IP Address Range in the ESXi VLAN. One address per Virtual Router is used "
+"from this range."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN IP Gateway"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN Netmask"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Management Server VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN on which the &PRODUCT; Management server is installed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN for the Public Network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN Gateway"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN Netmask"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN IP Address Range"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Range of Public IP Addresses available for &PRODUCT; use. These addresses "
+"will be used for virtual router on &PRODUCT; to route private traffic to "
+"external networks."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN Range for Customer use"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"A contiguous range of non-routable VLANs. One VLAN will be assigned for each"
+" customer."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "vSphere Installation Steps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"If you haven't already, you'll need to download and purchase vSphere from "
+"the VMware Website (<ulink "
+"url=\"https://www.vmware.com/tryvmware/index.php?p=vmware-"
+"vsphere&amp;lp=1\">https://www.vmware.com/tryvmware/index.php?p=vmware-"
+"vsphere&amp;lp=1</ulink>) and install it by following the VMware vSphere "
+"Installation Guide."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Following installation, perform the following configuration, which are "
+"described in the next few sections:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Required"
+msgstr "필수 사항"
+
+#. Tag: para
+#, no-c-format
+msgid "Optional"
+msgstr "옵션"
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi host setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "NIC bonding"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Configure host physical networking, virtual switch, vCenter Management "
+"Network, and extended port range"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Multipath storage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Prepare storage for iSCSI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Configure clusters in vCenter and add hosts to them, or add hosts without "
+"clusters to vCenter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ESXi Host setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"All ESXi hosts should enable CPU hardware virtualization support in BIOS. "
+"Please note hardware virtualization support is not enabled by default on "
+"most servers."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Physical Host Networking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"You should have a plan for cabling the vSphere hosts. Proper network "
+"configuration is required before adding a vSphere host to &PRODUCT;. To "
+"configure an ESXi host, you can use vClient to add it as standalone host to "
+"vCenter first. Once you see the host appearing in the vCenter inventory "
+"tree, click the host node in the inventory tree, and navigate to the "
+"Configuration tab."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In the host configuration tab, click the \"Hardware/Networking\" link to "
+"bring up the networking configuration page as above."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure Virtual Switch"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"A default virtual switch vSwitch0 is created. &PRODUCT; requires all ESXi "
+"hosts in the cloud to use the same set of virtual switch names. If you "
+"change the default virtual switch name, you will need to configure one or "
+"more &PRODUCT; configuration variables as well."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Separating Traffic"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"&PRODUCT; allows you to use vCenter to configure three separate networks per"
+" ESXi host. These networks are identified by the name of the vSwitch they "
+"are connected to. The allowed networks for configuration are public (for "
+"traffic to/from the public internet), guest (for guest-guest traffic), and "
+"private (for management and usually storage traffic). You can use the "
+"default virtual switch for all three, or create one or two other vSwitches "
+"for those traffic types."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"If you want to separate traffic in this way you should first create and "
+"configure vSwitches in vCenter according to the vCenter instructions. Take "
+"note of the vSwitch names you have used for each traffic type. You will "
+"configure &PRODUCT; to use these vSwitches."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Increasing Ports"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"By default a virtual switch on ESXi hosts is created with 56 ports. We "
+"recommend setting it to 4088, the maximum number of ports allowed. To do "
+"that, click the \"Properties...\" link for virtual switch (note this is not "
+"the Properties link for Networking)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In vSwitch properties dialog, select the vSwitch and click Edit. You should "
+"see the following dialog:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In this dialog, you can change the number of switch ports. After you've done"
+" that, ESXi hosts are required to reboot in order for the setting to take "
+"effect."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure vCenter Management Network"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In the vSwitch properties dialog box, you may see a vCenter management "
+"network. This same network will also be used as the &PRODUCT; management "
+"network. &PRODUCT; requires the vCenter management network to be configured "
+"properly. Select the management network item in the dialog, then click Edit."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Make sure the following values are set:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN ID set to the desired ID"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vMotion enabled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Management traffic enabled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"If the ESXi hosts have multiple VMKernel ports, and ESXi is not using the "
+"default value \"Management Network\" as the management network name, you "
+"must follow these guidelines to configure the management network port group "
+"so that &PRODUCT; can find it:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Use one label for the management network port across all ESXi hosts."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In the &PRODUCT; UI, go to Configuration - Global Settings and set "
+"vmware.management.portgroup to the management network label from the ESXi "
+"hosts."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Extend Port Range for &PRODUCT; Console Proxy"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Applies only to VMware vSphere version 4.x)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"You need to extend the range of firewall ports that the console proxy works "
+"with on the hosts. This is to enable the console proxy to work with VMware-"
+"based VMs. The default additional port range is 59000-60000. To extend the "
+"port range, log in to the VMware ESX service console on each host and run "
+"the following commands:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid ""
+"\n"
+"esxcfg-firewall -o 59000-60000,tcp,in,vncextras\n"
+"esxcfg-firewall -o 59000-60000,tcp,out,vncextras\n"
+"        "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure NIC Bonding for vSphere"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"NIC bonding on vSphere hosts may be done according to the vSphere "
+"installation guide."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Storage Preparation for vSphere (iSCSI only)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Use of iSCSI requires preparatory work in vCenter. You must add an iSCSI "
+"target and create an iSCSI datastore."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are using NFS, skip this section."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Enable iSCSI initiator for ESXi hosts"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"In vCenter, go to hosts and Clusters/Configuration, and click Storage "
+"Adapters link. You will see:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Select iSCSI software adapter and click Properties."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click the Configure... button."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Check Enabled to enable the initiator."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click OK to save."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Add iSCSI target"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Under the properties dialog, add the iSCSI target info:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Repeat these steps for all ESXi hosts in the cluster."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Create an iSCSI datastore"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You should now create a VMFS datastore. Follow these steps to do so:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Select Home/Inventory/Datastores."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Right click on the datacenter node."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Choose Add Datastore... command."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Follow the wizard to create a iSCSI datastore."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"This procedure should be done on one host in the cluster. It is not "
+"necessary to do this on all hosts."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Multipathing for vSphere (Optional)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Storage multipathing on vSphere nodes may be done according to the vSphere "
+"installation guide."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Add Hosts or Configure Clusters (vSphere)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Use vCenter to create a vCenter cluster and add your desired hosts to the "
+"cluster. You will later add the entire cluster to &PRODUCT;. (see <xref "
+"linkend=\"add-clusters-vsphere\" />)."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Applying Hotfixes to a VMware vSphere Host"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Disconnect the VMware vSphere cluster from &PRODUCT;. It should remain "
+"disconnected long enough to apply the hotfix on the host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Log in to the &PRODUCT; UI as root."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "See <xref linkend=\"log-in\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Navigate to the VMware cluster, click Actions, and select Unmanage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Watch the cluster status until it shows Unmanaged."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Perform the following on each of the ESXi hosts in the cluster:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Move each of the ESXi hosts in the cluster to maintenance mode."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Ensure that all the VMs are migrated to other hosts in that cluster."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"If there is only one host in that cluster, shutdown all the VMs and move the"
+" host into maintenance mode."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Apply the patch on the ESXi host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Restart the host if prompted."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Cancel the maintenance mode on the host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Reconnect the cluster to &PRODUCT;:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Navigate to the VMware cluster, click Actions, and select Manage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Watch the status to see that all the hosts come up. It might take several "
+"minutes for the hosts to come up."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Alternatively, verify the host state is properly synchronized and updated in"
+" the &PRODUCT; database."
+msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/dd671814/docs/ko-KR/vpn.po
----------------------------------------------------------------------
diff --git a/docs/ko-KR/vpn.po b/docs/ko-KR/vpn.po
new file mode 100644
index 0000000..2f1b1d9
--- /dev/null
+++ b/docs/ko-KR/vpn.po
@@ -0,0 +1,80 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+# 
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Docs\n"
+"POT-Creation-Date: 2013-03-19T13:38:05\n"
+"PO-Revision-Date: 2013-03-19 14:13+0000\n"
+"Last-Translator: sebgoa <runseb@gmail.com>\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ko_KR\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#. Tag: title
+#, no-c-format
+msgid "VPN"
+msgstr "가상 사설망(VPN)"
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"&PRODUCT; account owners can create virtual private networks (VPN) to access"
+" their virtual machines. If the guest network is instantiated from a network"
+" offering that offers the Remote Access VPN service, the virtual router "
+"(based on the System VM) is used to provide the service. &PRODUCT; provides "
+"a L2TP-over-IPsec-based remote access VPN service to guest virtual networks."
+" Since each network gets its own virtual router, VPNs are not shared across "
+"the networks. VPN clients native to Windows, Mac OS X and iOS can be used to"
+" connect to the guest networks. The account owner can create and manage "
+"users for their VPN. &PRODUCT; does not use its account database for this "
+"purpose but uses a separate table. The VPN user database is shared across "
+"all the VPNs created by the account owner. All VPN users get access to all "
+"VPNs created by the account owner."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"Make sure that not all traffic goes through the VPN. That is, the route "
+"installed by the VPN should be only for the guest network and not for all "
+"traffic."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"<emphasis role=\"bold\">Road Warrior / Remote Access</emphasis>. Users want
"
+"to be able to connect securely from a home or office to a private network in"
+" the cloud. Typically, the IP address of the connecting client is dynamic "
+"and cannot be preconfigured on the VPN server."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid ""
+"<emphasis role=\"bold\">Site to Site</emphasis>. In this scenario, two "
+"private subnets are connected over the public Internet with a secure VPN "
+"tunnel. The cloud user’s subnet (for example, an office network) is "
+"connected through a gateway to the network in the cloud. The address of the "
+"user’s gateway must be preconfigured on the VPN server in the cloud. Note "
+"that although L2TP-over-IPsec can be used to set up Site-to-Site VPNs, this "
+"is not the primary intent of this feature. For more information, see <xref "
+"linkend=\"site-to-site-vpn\" />"
+msgstr ""


Mime
View raw message