cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [24/52] [partial] Revert "CLOUDSTACK-1516: Added .po files for translations"
Date Wed, 20 Mar 2013 09:55:37 GMT
http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/citrix-xenserver-installation.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/citrix-xenserver-installation.po b/docs/pt-BR/citrix-xenserver-installation.po
deleted file mode 100644
index 8afc497..0000000
--- a/docs/pt-BR/citrix-xenserver-installation.po
+++ /dev/null
@@ -1,1504 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:05+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Citrix XenServer Installation for &PRODUCT;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you want to use the Citrix XenServer hypervisor to run guest virtual "
-"machines, install XenServer 6.0 or XenServer 6.0.2 on the host(s) in your "
-"cloud. For an initial installation, follow the steps below. If you have "
-"previously installed XenServer and want to upgrade to another version, see "
-"<xref linkend=\"xenserver-version-upgrading\" />."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "System Requirements for XenServer Hosts"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The host must be certified as compatible with one of the following. See the "
-"Citrix Hardware Compatibility Guide: <ulink "
-"url=\"http://hcl.xensource.com\">http://hcl.xensource.com</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 SP2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You must re-install Citrix XenServer if you are going to re-use a host from "
-"a previous install."
-msgstr "Você deve reinstalar o Citrix XenServer caso queira utilizar uma instalação anterior."
-
-#. Tag: para
-#, no-c-format
-msgid "Must support HVM (Intel-VT or AMD-V enabled)"
-msgstr "Deve suportar HVM (Intel-VT ou AMD-V habilitados)."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure all the hotfixes provided by the hypervisor vendor are applied. "
-"Track the release of hypervisor patches through your hypervisor vendor’s "
-"support channel, and apply patches as soon as possible after they are "
-"released. &PRODUCT; will not track or notify you of required hypervisor "
-"patches. It is essential that your hosts are completely up to date with the "
-"provided hypervisor patches. The hypervisor vendor is likely to refuse to "
-"support any system that is not up to date with patches."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All hosts within a cluster must be homogenous. The CPUs must be of the same "
-"type, count, and feature flags."
-msgstr "Todos os em um cluster devem ser homogêneos. As CPUs devem ser do mesmo tipo, número e mesmos recursos."
-
-#. Tag: para
-#, no-c-format
-msgid "Must support HVM (Intel-VT or AMD-V enabled in BIOS)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "64-bit x86 CPU (more cores results in better performance)"
-msgstr "CPU x86 64-bit (mais cores resultam em melhor performance)"
-
-#. Tag: para
-#, no-c-format
-msgid "Hardware virtualization support required"
-msgstr "Suporte de virtualização de hardware requerido"
-
-#. Tag: para
-#, no-c-format
-msgid "4 GB of memory"
-msgstr "4 GB de memória"
-
-#. Tag: para
-#, no-c-format
-msgid "36 GB of local disk"
-msgstr "36 GB de disco local"
-
-#. Tag: para
-#, no-c-format
-msgid "At least 1 NIC"
-msgstr "No mínimo 1 NIC"
-
-#. Tag: para
-#, no-c-format
-msgid "Statically allocated IP Address"
-msgstr "Endereço IP estaticamente assinalado"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you deploy &PRODUCT;, the hypervisor host must not have any VMs already"
-" running"
-msgstr "Quando você implementa o &PRODUCT;, o host hipervisor não pode ter máquinas virtuais já ativas"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The lack of up-do-date hotfixes can lead to data corruption and lost VMs."
-msgstr "A falta de hotfixes atualizadas pode levar a dados corrompidos e à perda de máquinas virtuais."
-
-#. Tag: title
-#, no-c-format
-msgid "XenServer Installation Steps"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"From <ulink "
-"url=\"https://www.citrix.com/English/ss/downloads/\">https://www.citrix.com/English/ss/downloads/</ulink>,"
-" download the appropriate version of XenServer for your &PRODUCT; version "
-"(see <xref linkend=\"system-requirements-xenserver-hosts\" />). Install it "
-"using the Citrix XenServer Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After installation, perform the following configuration steps, which are "
-"described in the next few sections:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Required"
-msgstr "Obrigatório"
-
-#. Tag: para
-#, no-c-format
-msgid "Optional"
-msgstr "Opcional"
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"config-xenserver-dom0-memory\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-support-pkg-installation\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-username-password\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Set up SR if not using NFS, iSCSI, or local disk; see <xref linkend"
-"=\"xenserver-primary-storage-setup\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-time-sync\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-iscsi-multipath-setup\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-get-deploy-license\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-physical-network-setup\" />"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configure XenServer dom0 Memory"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Configure the XenServer dom0 settings to allocate more memory to dom0. This "
-"can enable XenServer to handle larger numbers of virtual machines. We "
-"recommend 2940 MB of RAM for XenServer dom0. For instructions on how to do "
-"this, see <ulink "
-"url=\"http://support.citrix.com/article/CTX126531\">http://support.citrix.com/article/CTX126531</ulink>."
-" The article refers to XenServer 5.6, but the same information applies to "
-"XenServer 6.0."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Username and Password"
-msgstr "Usuário e Senha."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All XenServers in a cluster must have the same username and password as "
-"configured in &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Time Synchronization"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The host must be set to use NTP. All hosts in a pod must have the same time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Install NTP."
-msgstr "Instale o NTP"
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# yum install ntp"
-msgstr "# yum install ntp"
-
-#. Tag: para
-#, no-c-format
-msgid "Edit the NTP configuration file to point to your NTP server."
-msgstr "Edite o arquivo de configuração do NTP para apontar para o seu servidor NTP."
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# vi /etc/ntp.conf"
-msgstr "# vi /etc/ntp.conf"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Add one or more server lines in this file with the names of the NTP servers "
-"you want to use. For example:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"server 0.xenserver.pool.ntp.org\n"
-"server 1.xenserver.pool.ntp.org\n"
-"server 2.xenserver.pool.ntp.org\n"
-"server 3.xenserver.pool.ntp.org\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Restart the NTP client."
-msgstr "Reinicie o cliente NTP."
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# service ntpd restart"
-msgstr "# service ntpd restart"
-
-#. Tag: para
-#, no-c-format
-msgid "Make sure NTP will start again upon reboot."
-msgstr "Certifique-se de que o NTP será iniciado novamente após um boot."
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# chkconfig ntpd on"
-msgstr "# chkconfig ntpd on"
-
-#. Tag: title
-#, no-c-format
-msgid "Licensing"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Citrix XenServer Free version provides 30 days usage without a license. "
-"Following the 30 day trial, XenServer requires a free activation and "
-"license. You can choose to install a license now or skip this step. If you "
-"skip this step, you will need to install a license when you activate and "
-"license the XenServer."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Getting and Deploying a License"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you choose to install a license now you will need to use the XenCenter to"
-" activate and get a license."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In XenCenter, click Tools &gt; License manager."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select your XenServer and select Activate Free XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Request a license."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can install the license with XenCenter or using the xe command line "
-"tool."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Install &PRODUCT; XenServer Support Package (CSP)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "(Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To enable security groups, elastic load balancing, and elastic IP on "
-"XenServer, download and install the &PRODUCT; XenServer Support Package "
-"(CSP). After installing XenServer, perform the following additional steps on"
-" each XenServer host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Download the CSP software onto the XenServer host from one of the following "
-"links:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 6.0.2:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/3.0.1/XS-6.0.2/xenserver-"
-"cloud-supp.tgz\">http://download.cloud.com/releases/3.0.1/XS-6.0.2"
-"/xenserver-cloud-supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 5.6 SP2:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/2.2.0/xenserver-cloud-"
-"supp.tgz\">http://download.cloud.com/releases/2.2.0/xenserver-cloud-"
-"supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 6.0:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/3.0/xenserver-cloud-"
-"supp.tgz\">http://download.cloud.com/releases/3.0/xenserver-cloud-"
-"supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Extract the file:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# tar xf xenserver-cloud-supp.tgz"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the following script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# xe-install-supplemental-pack xenserver-cloud-supp.iso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the XenServer host is part of a zone that uses basic networking, disable "
-"Open vSwitch (OVS):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# xe-switch-network-backend  bridge"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Restart the host machine when prompted."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The XenServer host is now ready to be added to &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Primary Storage Setup for XenServer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; natively supports NFS, iSCSI and local storage. If you are using "
-"one of these storage types, there is no need to create the XenServer Storage"
-" Repository (\"SR\")."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If, however, you would like to use storage connected via some other "
-"technology, such as FiberChannel, you must set up the SR yourself. To do so,"
-" perform the following steps. If you have your hosts in a XenServer pool, "
-"perform the steps on the master node. If you are working with a single "
-"XenServer which is not part of a cluster, perform the steps on that "
-"XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Connect FiberChannel cable to all hosts in the cluster and to the "
-"FiberChannel storage host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Rescan the SCSI bus. Either use the following command or use XenCenter to "
-"perform an HBA rescan."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# scsi-rescan"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Repeat step <xref linkend=\"rescan-scsi\" /> on every host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Check to be sure you see the new SCSI disk."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# ls /dev/disk/by-id/scsi-360a98000503365344e6f6177615a516b -l"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The output should look like this, although the specific file name will be "
-"different (scsi-&lt;scsiID&gt;):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"lrwxrwxrwx 1 root root 9 Mar 16 13:47\n"
-"/dev/disk/by-id/scsi-360a98000503365344e6f6177615a516b -&gt; ../../sdc\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Repeat step <xref linkend=\"verify-scsi\" /> on every host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"On the storage server, run this command to get a unique ID for the new SR."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# uuidgen"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The output should look like this, although the specific ID will be "
-"different:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "e6849e96-86c3-4f2c-8fcc-350cc711be3d"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create the FiberChannel SR. In name-label, use the unique ID you just "
-"generated."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"# xe sr-create type=lvmohba shared=true\n"
-"device-config:SCSIid=360a98000503365344e6f6177615a516b\n"
-"name-label=\"e6849e96-86c3-4f2c-8fcc-350cc711be3d\"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This command returns a unique ID for the SR, like the following example "
-"(your ID will be different):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "7a143820-e893-6c6a-236e-472da6ee66bf"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To create a human-readable description for the SR, use the following "
-"command. In uuid, use the SR ID returned by the previous command. In name-"
-"description, set whatever friendly text you prefer."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe sr-param-set uuid=7a143820-e893-6c6a-236e-472da6ee66bf name-"
-"description=\"Fiber Channel storage repository\""
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Make note of the values you will need when you add this storage to &PRODUCT;"
-" later (see <xref linkend=\"primary-storage-add\" />). In the Add Primary "
-"Storage dialog, in Protocol, you will choose PreSetup. In SR Name-Label, you"
-" will enter the name-label you set earlier (in this example, e6849e96-86c3"
-"-4f2c-8fcc-350cc711be3d)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"(Optional) If you want to enable multipath I/O on a FiberChannel SAN, refer "
-"to the documentation provided by the SAN vendor."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "iSCSI Multipath Setup for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When setting up the storage repository on a Citrix XenServer, you can enable"
-" multipath I/O, which uses redundant physical components to provide greater "
-"reliability in the connection between the server and the SAN. To enable "
-"multipathing, use a SAN solution that is supported for Citrix servers and "
-"follow the procedures in Citrix documentation. The following links provide a"
-" starting point:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink "
-"url=\"http://support.citrix.com/article/CTX118791\">http://support.citrix.com/article/CTX118791</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink "
-"url=\"http://support.citrix.com/article/CTX125403\">http://support.citrix.com/article/CTX125403</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can also ask your SAN vendor for advice about setting up your Citrix "
-"repository for multipathing."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Make note of the values you will need when you add this storage to the "
-"&PRODUCT; later (see <xref linkend=\"primary-storage-add\" />). In the Add "
-"Primary Storage dialog, in Protocol, you will choose PreSetup. In SR Name-"
-"Label, you will enter the same name used to create the SR."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you encounter difficulty, address the support team for the SAN provided "
-"by your vendor. If they are not able to solve your issue, see Contacting "
-"Support."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Physical Networking Setup for XenServer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Once XenServer has been installed, you may need to do some additional "
-"network configuration. At this point in the installation, you should have a "
-"plan for what NICs the host will have and what traffic each NIC will carry. "
-"The NICs should be cabled as necessary to implement your plan."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you plan on using NIC bonding, the NICs on all hosts in the cluster must "
-"be cabled exactly the same. For example, if eth0 is in the private bond on "
-"one host in a cluster, then eth0 must be in the private bond on all hosts in"
-" the cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The IP address assigned for the management network interface must be static."
-" It can be set on the host itself or obtained via static DHCP."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; configures network traffic of various types to use different NICs "
-"or bonds on the XenServer host. You can control this process and provide "
-"input to the Management Server through the use of XenServer network name "
-"labels. The name labels are placed on physical interfaces or bonds and "
-"configured in &PRODUCT;. In some simple cases the name labels are not "
-"required."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid ""
-"Configuring Public Network with a Dedicated NIC for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; supports the use of a second NIC (or bonded pair of NICs, "
-"described in <xref linkend=\"xenserver-nic-bonding\" />) for the public "
-"network. If bonding is not used, the public network can be on any NIC and "
-"can be on different NICs on the hosts in a cluster. For example, the public "
-"network can be on eth0 on node A and eth1 on node B. However, the XenServer "
-"name-label for the public network must be identical across all hosts. The "
-"following examples set the network label to \"cloud-public\". After the "
-"management server is installed and running you must configure it with the "
-"name of the chosen network label (e.g. \"cloud-public\"); this is discussed "
-"in <xref linkend=\"management-server-install-flow\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are using two NICs bonded together to create a public network, see "
-"<xref linkend=\"xenserver-nic-bonding\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are using a single dedicated NIC to provide public network access, "
-"follow this procedure on each new host that is added to &PRODUCT; before "
-"adding the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run xe network-list and find the public network. This is usually attached to"
-" the NIC that is public. Once you find the network make note of its UUID. "
-"Call this &lt;UUID-Public&gt;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the following command."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-param-set name-label=cloud-public uuid=&lt;UUID-Public&gt;"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring Multiple Guest Networks for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; supports the use of multiple guest networks with the XenServer "
-"hypervisor. Each network is assigned a name-label in XenServer. For example,"
-" you might have two networks with the labels \"cloud-guest\" and \"cloud-"
-"guest2\". After the management server is installed and running, you must add"
-" the networks and use these labels so that &PRODUCT; is aware of the "
-"networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Follow this procedure on each new host before adding the host to &PRODUCT;:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run xe network-list and find one of the guest networks. Once you find the "
-"network make note of its UUID. Call this &lt;UUID-Guest&gt;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run the following command, substituting your own name-label and uuid values."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-param-set name-label=&lt;cloud-guestN&gt; uuid=&lt;UUID-"
-"Guest&gt;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Repeat these steps for each additional guest network, using a different "
-"name-label and uuid each time."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Separate Storage Network for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can optionally set up a separate storage network. This should be done "
-"first on the host, before implementing the bonding steps below. This can be "
-"done using one or two available NICs. With two NICs bonding may be done as "
-"above. It is the administrator's responsibility to set up a separate storage"
-" network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Give the storage network a different name-label than what will be given for "
-"other networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For the separate storage network to work correctly, it must be the only "
-"interface that can ping the primary storage device's IP address. For "
-"example, if eth0 is the management network NIC, ping -I eth0 &lt;primary "
-"storage device IP&gt; must fail. In all deployments, secondary storage "
-"devices must be pingable from the management network NIC or bond. If a "
-"secondary storage device has been placed on the storage network, it must "
-"also be pingable via the storage network NIC or bond on the hosts as well."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can set up two separate storage networks as well. For example, if you "
-"intend to implement iSCSI multipath, dedicate two non-bonded NICs to "
-"multipath. Each of the two networks needs a unique name-label."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If no bonding is done, the administrator must set up and name-label the "
-"separate storage network on all hosts (masters and slaves)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Here is an example to set up eth5 to access a storage network on "
-"172.16.0.0/24."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"# xe pif-list host-name-label='hostname' device=eth5\n"
-"uuid(RO): ab0d3dd4-5744-8fae-9693-a022c7a3471d\n"
-"device ( RO): eth5\n"
-"#xe pif-reconfigure-ip DNS=172.16.3.3 gateway=172.16.0.1 IP=172.16.0.55 mode=static netmask=255.255.255.0 uuid=ab0d3dd4-5744-8fae-9693-a022c7a3471d"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "NIC Bonding for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"XenServer supports Source Level Balancing (SLB) NIC bonding. Two NICs can be"
-" bonded together to carry public, private, and guest traffic, or some "
-"combination of these. Separate storage networks are also possible. Here are "
-"some example supported configurations:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 2 NICs on public, 2 NICs on storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 1 NIC on public, storage uses management network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 2 NICs on public, storage uses management network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "1 NIC for private, public, and storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "All NIC bonding is optional."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"XenServer expects all nodes in a cluster will have the same network cabling "
-"and same bonds implemented. In an installation the master will be the first "
-"host that was added to the cluster and the slave hosts will be all "
-"subsequent hosts added to the cluster. The bonds present on the master set "
-"the expectation for hosts added to the cluster later. The procedure to set "
-"up bonds on the master and slaves are different, and are described below. "
-"There are several important implications of this:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You must set bonds on the first host added to a cluster. Then you must use "
-"xe commands as below to establish the same bonds in the second and "
-"subsequent hosts added to a cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Slave hosts in a cluster must be cabled exactly the same as the master. For "
-"example, if eth0 is in the private bond on the master, it must be in the "
-"management network for added slave hosts."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Management Network Bonding"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The administrator must bond the management network NICs prior to adding the "
-"host to &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a Private Bond on the First Host in the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Use the following steps to create a bond in XenServer. These steps should be"
-" run on only the first host in a cluster. This example creates the cloud-"
-"private network with two physical NICs (eth0 and eth1) bonded into it."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Find the physical NICs that you want to bond together."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe pif-list host-name-label='hostname' device=eth0\n"
-"# xe pif-list host-name-label='hostname' device=eth1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These command shows the eth0 and eth1 NICs and their UUIDs. Substitute the "
-"ethX devices of your choice. Call the UUID's returned by the above command "
-"slave1-UUID and slave2-UUID."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create a new network for the bond. For example, a new network with name "
-"\"cloud-private\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">This label is important. &PRODUCT; looks for a "
-"network by a name you configure. You must use the same name-label for all "
-"hosts in the cloud for the management network.</emphasis>"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-create name-label=cloud-private\n"
-"# xe bond-create network-uuid=[uuid of cloud-private created above]\n"
-"pif-uuids=[slave1-uuid],[slave2-uuid]"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Now you have a bonded pair that can be recognized by &PRODUCT; as the "
-"management network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Public Network Bonding"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Bonding can be implemented on a separate, public network. The administrator "
-"is responsible for creating a bond for the public network if that network "
-"will be bonded and will be separate from the management network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a Public Bond on the First Host in the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These steps should be run on only the first host in a cluster. This example "
-"creates the cloud-public network with two physical NICs (eth2 and eth3) "
-"bonded into it."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"#xe pif-list host-name-label='hostname' device=eth2\n"
-"# xe pif-list host-name-label='hostname' device=eth3"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These command shows the eth2 and eth3 NICs and their UUIDs. Substitute the "
-"ethX devices of your choice. Call the UUID's returned by the above command "
-"slave1-UUID and slave2-UUID."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create a new network for the bond. For example, a new network with name "
-"\"cloud-public\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">This label is important. &PRODUCT; looks for a "
-"network by a name you configure. You must use the same name-label for all "
-"hosts in the cloud for the public network.</emphasis>"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-create name-label=cloud-public\n"
-"# xe bond-create network-uuid=[uuid of cloud-public created above]\n"
-"pif-uuids=[slave1-uuid],[slave2-uuid]"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Now you have a bonded pair that can be recognized by &PRODUCT; as the public"
-" network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Adding More Hosts to the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With the bonds (if any) established on the master, you should add "
-"additional, slave hosts. Run the following command for all additional hosts "
-"to be added to the cluster. This will cause the host to join the master in a"
-" single XenServer pool."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe pool-join master-address=[master IP] master-username=root\n"
-"master-password=[your password]"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Complete the Bonding Setup Across the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With all hosts added to the pool, run the cloud-setup-bond script. This "
-"script will complete the configuration and set up of the bonds across all "
-"hosts in the cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Copy the script from the Management Server in "
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/cloud-setup-"
-"bonding.sh to the master host and ensure it is executable."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# ./cloud-setup-bonding.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Now the bonds are set up and configured properly across the cluster."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Upgrading XenServer Versions"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This section tells how to upgrade XenServer software on &PRODUCT; hosts. The"
-" actual upgrade is described in XenServer documentation, but there are some "
-"additional steps you must perform before and after the upgrade."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure the hardware is certified compatible with the new version of "
-"XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To upgrade XenServer:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Upgrade the database. On the Management Server node:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Back up the database:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# mysqldump --user=root --databases cloud &gt; cloud.backup.sql\n"
-"# mysqldump --user=root --databases cloud_usage &gt; cloud_usage.backup.sql"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You might need to change the OS type settings for VMs running on the "
-"upgraded hosts."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 GA to XenServer 5.6 SP2, change any VMs "
-"that have the OS type CentOS 5.5 (32-bit), Oracle Enterprise Linux 5.5 "
-"(32-bit), or Red Hat Enterprise Linux 5.5 (32-bit) to Other Linux (32-bit). "
-"Change any VMs that have the 64-bit versions of these same OS types to Other"
-" Linux (64-bit)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 SP2 to XenServer 6.0.2, change any VMs "
-"that have the OS type CentOS 5.6 (32-bit), CentOS 5.7 (32-bit), Oracle "
-"Enterprise Linux 5.6 (32-bit), Oracle Enterprise Linux 5.7 (32-bit), Red Hat"
-" Enterprise Linux 5.6 (32-bit) , or Red Hat Enterprise Linux 5.7 (32-bit) to"
-" Other Linux (32-bit). Change any VMs that have the 64-bit versions of these"
-" same OS types to Other Linux (64-bit)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 to XenServer 6.0.2, do all of the above."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Restart the Management Server and Usage Server. You only need to do this "
-"once for all clusters."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# service cloud-management start\n"
-"# service cloud-usage start"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Disconnect the XenServer cluster from &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as root."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Navigate to the XenServer cluster, and click Actions – Unmanage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Watch the cluster status until it shows Unmanaged."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Log in to one of the hosts in the cluster, and run this command to clean up "
-"the VLAN:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# . /opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Still logged in to the host, run the upgrade preparation script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/cloud-prepare-upgrade.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: If you see the error \"can't eject CD,\" log in to the VM "
-"and umount the CD, then run the script again."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Upgrade the XenServer software on all hosts in the cluster. Upgrade the "
-"master first."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Live migrate all VMs on this host to other hosts. See the instructions for "
-"live migration in the Administrator's Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: You might see the following error when you migrate a VM:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"[root@xenserver-qa-2-49-4 ~]# xe vm-migrate live=true host=xenserver-qa-2-49-5 vm=i-2-8-VM\n"
-"You attempted an operation on a VM which requires PV drivers to be installed but the drivers were not detected.\n"
-"vm: b6cf79c8-02ee-050b-922f-49583d9f1a14 (i-2-8-VM)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To solve this issue, run the following:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# /opt/xensource/bin/make_migratable.sh  b6cf79c8-02ee-050b-922f-"
-"49583d9f1a14"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Reboot the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Upgrade to the newer version of XenServer. Use the steps in XenServer "
-"documentation."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After the upgrade is complete, copy the following files from the management "
-"server to this host, in the directory locations shown below:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Copy this Management Server file..."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "...to this location on the XenServer host"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/xenserver60/NFSSR.py"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/sm/NFSSR.py"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/make_migratable.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/make_migratable.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: If you see the following error message, you can safely "
-"ignore it."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "mv: cannot stat `/etc/cron.daily/logrotate': No such file or directory"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Plug in the storage repositories (physical block devices) to the XenServer "
-"host:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# for pbd in `xe pbd-list currently-attached=false| grep ^uuid | awk '{print"
-" $NF}'`; do xe pbd-plug uuid=$pbd ; done"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Note: If you add a host to this XenServer pool, you need to migrate all VMs "
-"on this host to other hosts, and eject this host from XenServer pool."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Repeat these steps to upgrade every host in the cluster to the same version "
-"of XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run the following command on one host in the XenServer cluster to clean up "
-"the host tags:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# for host in $(xe host-list | grep ^uuid | awk '{print $NF}') ; do xe host-"
-"param-clear uuid=$host param-name=tags; done;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When copying and pasting a command, be sure the command has pasted as a "
-"single line before executing. Some document viewers may introduce unwanted "
-"line breaks in copied text."
-msgstr "Ao copiar e colar um comando, certifique-se que o comando tenha colado como uma única linha antes de executar. Alguns viewers documento pode introduzir quebras de linha indesejadas no texto copiado."
-
-#. Tag: para
-#, no-c-format
-msgid "Reconnect the XenServer cluster to &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Navigate to the XenServer cluster, and click Actions – Manage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Watch the status to see that all the hosts come up."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "After all hosts are up, run the following on one host in the cluster:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/cloud-infrastructure-concepts.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/cloud-infrastructure-concepts.po b/docs/pt-BR/cloud-infrastructure-concepts.po
deleted file mode 100644
index 680a948..0000000
--- a/docs/pt-BR/cloud-infrastructure-concepts.po
+++ /dev/null
@@ -1,20 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-01-11 20:04+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Cloud Infrastructure Concepts"
-msgstr "Conceitos de infraestrutura de nuvem"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/cloud-infrastructure-overview.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/cloud-infrastructure-overview.po b/docs/pt-BR/cloud-infrastructure-overview.po
deleted file mode 100644
index 63080f7..0000000
--- a/docs/pt-BR/cloud-infrastructure-overview.po
+++ /dev/null
@@ -1,80 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:37+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Cloud Infrastructure Overview"
-msgstr "Visão geral da infraestrutura de nuvem"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The Management Server manages one or more zones (typically, datacenters) "
-"containing host computers where guest virtual machines will run. The cloud "
-"infrastructure is organized as follows:"
-msgstr "O servidor de gerenciamento gerencia uma ou mais zonas (tipicamente, datacenters) contendo hosts onde máquinas virtuais hóspedes serão executadas. A infraestrutura de nuvem é organizada como se segue:"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Zone: Typically, a zone is equivalent to a single datacenter. A zone "
-"consists of one or more pods and secondary storage."
-msgstr "Zona: tipicamente, uma zona é equivalente a um único datacenter. Uma zona consiste em um ou mais pods e storage secundária."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Pod: A pod is usually one rack of hardware that includes a layer-2 switch "
-"and one or more clusters."
-msgstr "Pod: um pod é usualmente um rack de hardware que inclui uma switch layer-2 e um ou mais clusters."
-
-#. Tag: para
-#, no-c-format
-msgid "Cluster: A cluster consists of one or more hosts and primary storage."
-msgstr "Cluster: um cluster consiste em um ou mais hosts e storage primária."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Host: A single compute node within a cluster. The hosts are where the actual"
-" cloud services run in the form of guest virtual machines."
-msgstr "Host: um nó computacional em um cluster. É nos hosts onde realmente os serviços de nuvem são executados, na forma de máquinas virtuais hóspedes."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Primary storage is associated with a cluster, and it stores the disk volumes"
-" for all the VMs running on hosts in that cluster."
-msgstr "Storage primária é associada com um cluster, e armazena os volumes de disco para todas as máquinas virtuais sendo executadas em hosts neste cluster."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Secondary storage is associated with a zone, and it stores templates, ISO "
-"images, and disk volume snapshots."
-msgstr "Storage secundária é associada com uma zona, e armazena templates, imagens ISO e snapshots de volumes de disco."
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">More Information</emphasis>"
-msgstr "<emphasis role=\"bold\">Informações adicionais</emphasis>"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For more information, see documentation on cloud infrastructure concepts."
-msgstr "Para informações adicionais, veja a documentação sobre conceitos de infraestrutura de nuvem."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/cloudmonkey.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/cloudmonkey.po b/docs/pt-BR/cloudmonkey.po
deleted file mode 100644
index 466f828..0000000
--- a/docs/pt-BR/cloudmonkey.po
+++ /dev/null
@@ -1,527 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:14+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is the &PRODUCT; Command Line Interface (CLI). It is written in "
-"Python. CloudMonkey can be used both as an interactive shell and as a "
-"command line tool which simplifies &PRODUCT; configuration and management. "
-"It can be used with &PRODUCT; CloudStack 4.0-incubating and above"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is still under development and should be considered a Work In "
-"Progress (WIP), the wiki is the most up to date documentation:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"https://cwiki.apache.org/CLOUDSTACK/cloudstack-cloudmonkey-"
-"cli.html\">https://cwiki.apache.org/CLOUDSTACK/cloudstack-cloudmonkey-"
-"cli.html</ulink>"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Installing CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is dependent on <emphasis>readline, pygments, "
-"prettytable</emphasis>, when installing from source you will need to resolve"
-" those dependencies. Using the cheese shop, the dependencies will be "
-"automatically installed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There are three ways to get CloudMonkey. Via the official &PRODUCT; source "
-"releases or via a community maintained distribution at <ulink "
-"url=\"http://pypi.python.org/pypi/cloudmonkey/\">the cheese shop</ulink>. "
-"Developers can also get it directly from the git repository in "
-"<emphasis>tools/cli/</emphasis>."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Via the official Apache &PRODUCT; releases as well as the git repository."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"    \n"
-"$ git clone https://git-wip-us.apache.org/repos/asf/incubator-cloudstack.git # (optional if using a release download)\n"
-"$ mvn clean install -P developer\n"
-"$ cd tools/cli # cloudmonkey-x.x.x.tar.gz will be built in dist\n"
-"$ python setup.py build\n"
-"$ python setup.py install\n"
-"    \n"
-"                    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Via a community maintained package on Cheese Shop"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "pip install cloudmonkey"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuration"
-msgstr "Configuração"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To configure CloudMonkey you can edit the ~/.cloudmonkey/config file in the "
-"user's home directory as shown below. The values can also be set "
-"interactively at the cloudmonkey prompt. Logs are kept in "
-"~/.cloudmonkey/log, and history is stored in ~/.cloudmonkey/history. "
-"Discovered apis are listed in ~/.cloudmonkey/cache. Only the log and history"
-" files can be custom paths and can be configured by setting appropriate file"
-" paths in ~/.cloudmonkey/config"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"$ cat ~/.cloudmonkey/config \n"
-"[core]\n"
-"log_file = /Users/sebastiengoasguen/.cloudmonkey/log\n"
-"asyncblock = true\n"
-"paramcompletion = false\n"
-"history_file = /Users/sebastiengoasguen/.cloudmonkey/history\n"
-"\n"
-"[ui]\n"
-"color = true\n"
-"prompt = &gt; \n"
-"tabularize = false\n"
-"\n"
-"[user]\n"
-"secretkey =VDaACYb0LV9eNjTetIOElcVQkvJck_J_QljX_FcHRj87ZKiy0z0ty0ZsYBkoXkY9b7eq1EhwJaw7FF3akA3KBQ \n"
-"apikey = plgWJfZK4gyS3mOMTVmjUVg-X-jlWlnfaUJ9GAbBbf9EdMkAYMmAiLqzzq1ElZLYq_u38zCm0bewzGUdP66mg\n"
-"\n"
-"[server]\n"
-"path = /client/api\n"
-"host = localhost\n"
-"protocol = http\n"
-"port = 8080\n"
-"timeout = 3600\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The values can also be set at the CloudMonkey prompt. The API and secret "
-"keys are obtained via the &PRODUCT; UI or via a raw api call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"$ cloudmonkey\n"
-"☁ Apache CloudStack cloudmonkey 4.1.0-snapshot. Type help or ? to list commands.\n"
-"\n"
-"&gt; set prompt myprompt&gt;\n"
-"myprompt&gt; set host localhost\n"
-"myprompt&gt; set port 8080\n"
-"myprompt&gt; set apikey &lt;your api key&gt;\n"
-"myprompt&gt; set secretkey &lt;your secret key&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can use CloudMonkey to interact with a local cloud, and even with a "
-"remote public cloud. You just need to set the host value properly and obtain"
-" the keys from the cloud administrator."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "API Discovery"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In &PRODUCT; 4.0.* releases, the list of api calls available will be pre-"
-"cached, while starting with &PRODUCT; 4.1 releases and above an API "
-"discovery service is enabled. CloudMonkey will discover automatically the "
-"api calls available on the management server. The sync command in "
-"CloudMonkey pulls a list of apis which are accessible to your user role, "
-"along with help docs etc. and stores them in ~/.cloudmonkey/cache. This "
-"allows cloudmonkey to be adaptable to changes in mgmt server, so in case the"
-" sysadmin enables a plugin such as Nicira NVP for that user role, the users "
-"can get those changes. New verbs and grammar (DSL) rules are created on the "
-"fly."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To discover the APIs available do:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-" &gt; sync\n"
-"324 APIs discovered and cached\n"
-"    "
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Tabular Output"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The number of key/value pairs returned by the api calls can be large "
-"resulting in a very long output. To enable easier viewing of the output, a "
-"tabular formatting can be setup. You may enable tabular listing and even "
-"choose set of column fields, this allows you to create your own field using "
-"the filter param which takes in comma separated argument. If argument has a "
-"space, put them under double quotes. The create table will have the same "
-"sequence of field filters provided"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To enable it, use the <emphasis>set</emphasis> function and create filters "
-"like so:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"&gt; set tabularize true\n"
-"&gt; list users filter=id,domain,account\n"
-"count = 1\n"
-"user:\n"
-"+--------------------------------------+--------+---------+\n"
-"|                  id                  | domain | account |\n"
-"+--------------------------------------+--------+---------+\n"
-"| 7ed6d5da-93b2-4545-a502-23d20b48ef2a |  ROOT  |  admin  |\n"
-"+--------------------------------------+--------+---------+\n"
-"    "
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Interactive Shell Usage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To start learning CloudMonkey, the best is to use the interactive shell. "
-"Simply type CloudMonkey at the prompt and you should get the interactive "
-"shell."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"At the CloudMonkey prompt press the tab key twice, you will see all "
-"potential verbs available. Pick on, enter a space and then press tab twice. "
-"You will see all actions available for that verb"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;\n"
-"EOF        assign     cancel     create     detach     extract    ldap       prepare    reconnect  restart    shell      update     \n"
-"activate   associate  change     delete     disable    generate   list       query      register   restore    start      upload     \n"
-"add        attach     configure  deploy     enable     get        mark       quit       remove     revoke     stop       \n"
-"api        authorize  copy       destroy    exit       help       migrate    reboot     reset      set        suspend    \n"
-"cloudmonkey&gt;create \n"
-"account                diskoffering           loadbalancerrule       portforwardingrule     snapshot               tags                   vpc\n"
-"autoscalepolicy        domain                 network                privategateway         snapshotpolicy         template               vpcoffering\n"
-"autoscalevmgroup       firewallrule           networkacl             project                sshkeypair             user                   vpnconnection\n"
-"autoscalevmprofile     instancegroup          networkoffering        remoteaccessvpn        staticroute            virtualrouterelement   vpncustomergateway\n"
-"condition              ipforwardingrule       physicalnetwork        securitygroup          storagenetworkiprange  vlaniprange            vpngateway\n"
-"counter                lbstickinesspolicy     pod                    serviceoffering        storagepool            volume                 zone\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Picking one action and entering a space plus the tab key, you will obtain "
-"the list of parameters for that specific api call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;create network \n"
-"account=            domainid=           isAsync=            networkdomain=      projectid=          vlan=               \n"
-"acltype=            endip=              name=               networkofferingid=  startip=            vpcid=              \n"
-"displaytext=        gateway=            netmask=            physicalnetworkid=  subdomainaccess=    zoneid=             \n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To get additional help on that specific api call you can use the following:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;create network -h\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"\n"
-"cloudmonkey&gt;create network -help\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"\n"
-"cloudmonkey&gt;create network --help\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"cloudmonkey&gt;    \n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Note the required arguments necessary for the calls."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To find out the required parameters value, using a debugger console on the "
-"&PRODUCT; UI might be very useful. For instance using Firebug on Firefox, "
-"you can navigate the UI and check the parameters values for each call you "
-"are making as you navigate the UI."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Starting a Virtual Machine instance with CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To start a virtual machine instance we will use the <emphasis>deploy "
-"virtualmachine</emphasis> call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;deploy virtualmachine -h\n"
-"Creates and automatically starts a virtual machine based on a service offering, disk offering, and template.\n"
-"Required args: serviceofferingid templateid zoneid\n"
-"Args: account diskofferingid displayname domainid group hostid hypervisor ipaddress iptonetworklist isAsync keyboard keypair name networkids projectid securitygroupids securitygroupnames serviceofferingid size startvm templateid userdata zoneid\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The required arguments are <emphasis>serviceofferingid, templateid and "
-"zoneid</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In order to specify the template that we want to use, we can list all "
-"available templates with the following call:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;list templates templatefilter=all\n"
-"count = 2\n"
-"template:\n"
-"========\n"
-"domain = ROOT\n"
-"domainid = 8a111e58-e155-4482-93ce-84efff3c7c77\n"
-"zoneid = e1bfdfaf-3d9b-43d4-9aea-2c9f173a1ae7\n"
-"displaytext = SystemVM Template (XenServer)\n"
-"ostypeid = 849d7d0a-9fbe-452a-85aa-70e0a0cbc688\n"
-"passwordenabled = False\n"
-"id = 6d360f79-4de9-468c-82f8-a348135d298e\n"
-"size = 2101252608\n"
-"isready = True\n"
-"templatetype = SYSTEM\n"
-"zonename = devcloud\n"
-"...&lt;snipped&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In this snippet, I used DevCloud and only showed the beginning output of the"
-" first template, the SystemVM template"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Similarly to get the <emphasis>serviceofferingid</emphasis> you would do:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;list serviceofferings | grep id\n"
-"id = ef2537ad-c70f-11e1-821b-0800277e749c\n"
-"id = c66c2557-12a7-4b32-94f4-48837da3fa84\n"
-"id = 3d8b82e5-d8e7-48d5-a554-cf853111bc50\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Note that we can use the linux pipe as well as standard linux commands "
-"within the interactive shell. Finally we would start an instance with the "
-"following call:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;deploy virtualmachine templateid=13ccff62-132b-4caf-b456-e8ef20cbff0e zoneid=e1bfdfaf-3d9b-43d4-9aea-2c9f173a1ae7 serviceofferingid=ef2537ad-c70f-11e1-821b-0800277e749c\n"
-"jobprocstatus = 0\n"
-"created = 2013-03-05T13:04:51-0800\n"
-"cmd = com.cloud.api.commands.DeployVMCmd\n"
-"userid = 7ed6d5da-93b2-4545-a502-23d20b48ef2a\n"
-"jobstatus = 1\n"
-"jobid = c441d894-e116-402d-aa36-fdb45adb16b7\n"
-"jobresultcode = 0\n"
-"jobresulttype = object\n"
-"jobresult:\n"
-"=========\n"
-"virtualmachine:\n"
-"==============\n"
-"domain = ROOT\n"
-"domainid = 8a111e58-e155-4482-93ce-84efff3c7c77\n"
-"haenable = False\n"
-"templatename = tiny Linux\n"
-"...&lt;snipped&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The instance would be stopped with:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"cloudmonkey&gt;stop virtualmachine id=7efe0377-4102-4193-bff8-c706909cc2d2\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The <emphasis>ids</emphasis> that you will use will differ from this "
-"example. Make sure you use the ones that corresponds to your &PRODUCT; "
-"cloud."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Scripting with CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All previous examples use CloudMonkey via the interactive shell, however it "
-"can be used as a straightfoward CLI, passing the commands to the "
-"<emphasis>cloudmonkey</emphasis> command like shown below."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "$cloudmonkey list users"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"As such it can be used in shell scripts, it can received commands via stdin "
-"and its output can be parsed like any other unix commands as mentioned "
-"before."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/cloudstack.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/cloudstack.po b/docs/pt-BR/cloudstack.po
deleted file mode 100644
index 52b8e76..0000000
--- a/docs/pt-BR/cloudstack.po
+++ /dev/null
@@ -1,30 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-01-14 18:00+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "&PRODUCT; Complete Documentation"
-msgstr "Documentação completa do &PRODUCT; "
-
-#. Tag: productname
-#, no-c-format
-msgid "Apache CloudStack"
-msgstr "Apache CloudStack"
-
-#. Tag: para
-#, no-c-format
-msgid "Complete documentation for &PRODUCT;."
-msgstr "Documentação completa do &PRODUCT;."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/cluster-add.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/cluster-add.po b/docs/pt-BR/cluster-add.po
deleted file mode 100644
index 7c03643..0000000
--- a/docs/pt-BR/cluster-add.po
+++ /dev/null
@@ -1,29 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-03 15:31+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Adding a Cluster"
-msgstr "Adicionando um cluster"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You need to tell &PRODUCT; about the hosts that it will manage. Hosts exist "
-"inside clusters, so before you begin adding hosts to the cloud, you must add"
-" at least one cluster."
-msgstr "Você precisa informar ao &PRODUCT; sobre os hosts que ele irá gerenciar. Hosts existem em clusters, portanto antes de você começar a adicionar hosts à nuvem, você deve adicionar pelo menos um cluster."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/compatibility-matrix.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/compatibility-matrix.po b/docs/pt-BR/compatibility-matrix.po
deleted file mode 100644
index c0f7243..0000000
--- a/docs/pt-BR/compatibility-matrix.po
+++ /dev/null
@@ -1,106 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-01 20:18+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Compatibility Matrix"
-msgstr "Matriz de compatibilidade"
-
-#. Tag: para
-#, no-c-format
-msgid "Hypervisor"
-msgstr "Hipervisor"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 2.1.x"
-msgstr "CloudStack 2.1.x"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 2.2.x"
-msgstr "CloudStack 2.2.x"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.0"
-msgstr "CloudStack 3.0.0"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.1"
-msgstr "CloudStack 3.0.1"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.2"
-msgstr "CloudStack 3.0.2"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.3"
-msgstr "CloudStack 3.0.3"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6"
-msgstr "XenServer 5.6"
-
-#. Tag: para
-#, no-c-format
-msgid "Yes"
-msgstr "Sim"
-
-#. Tag: para
-#, no-c-format
-msgid "No"
-msgstr "Não"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 FP1"
-msgstr "XenServer 5.6 FP1"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 SP2"
-msgstr "XenServer 5.6 SP2"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.0"
-msgstr "XenServer 6.0.0"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.2"
-msgstr "XenServer 6.0.2"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.1"
-msgstr "XenServer 6.1"
-
-#. Tag: para
-#, no-c-format
-msgid "KVM (RHEL 6.0 or 6.1)"
-msgstr "KVM (RHEL 6.0 ou 6.1)"
-
-#. Tag: para
-#, no-c-format
-msgid "VMware (vSphere and vCenter, both version 4.1)"
-msgstr "VMware (vSphere and vCenter, ambos na versão 4.1)"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/concepts.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/concepts.po b/docs/pt-BR/concepts.po
deleted file mode 100644
index b7090e8..0000000
--- a/docs/pt-BR/concepts.po
+++ /dev/null
@@ -1,20 +0,0 @@
-# 
-# Translators:
-#   <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-01-11 17:58+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Concepts"
-msgstr "Conceitos"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/configure-acl.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/configure-acl.po b/docs/pt-BR/configure-acl.po
deleted file mode 100644
index 3890290..0000000
--- a/docs/pt-BR/configure-acl.po
+++ /dev/null
@@ -1,204 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:37+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring Access Control List"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Define Network Access Control List (ACL) on the VPC virtual router to "
-"control incoming (ingress) and outgoing (egress) traffic between the VPC "
-"tiers, and the tiers and Internet. By default, all incoming and outgoing "
-"traffic to the guest networks is blocked. To open the ports, you must create"
-" a new network ACL. The network ACLs can be created for the tiers only if "
-"the NetworkACL service is supported."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr "Faça login na interface de usuário do &PRODUCT; como administrador ou usuário final."
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr "Na barra de navegação à esquerda, selecione Network."
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr "Na view Select, selecione VPC."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr "Todas as VPCs que você criou para a conta são listadas na página."
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr "Clique no ícone Settings."
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr "As seguintes opções são apresentadas."
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "Endereços IP"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr "Gateways"
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr "Site-to-Site VPN"
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "Network ACLs"
-
-#. Tag: para
-#, no-c-format
-msgid "Select Network ACLs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Network ACLs page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add Network ACLs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To add an ACL rule, fill in the following fields to specify what kind of "
-"network traffic is allowed in this tier."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">CIDR</emphasis>: The CIDR acts as the Source CIDR "
-"for the Ingress rules, and Destination CIDR for the Egress rules. To accept "
-"traffic only from or to the IP addresses within a particular address block, "
-"enter a CIDR or a comma-separated list of CIDRs. The CIDR is the base IP "
-"address of the incoming traffic. For example, 192.168.0.0/22. To allow all "
-"CIDRs, set to 0.0.0.0/0."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol</emphasis>: The networking protocol that "
-"sources use to send traffic to the tier. The TCP and UDP protocols are "
-"typically used for data exchange and end-user communications. The ICMP "
-"protocol is typically used to send error messages or network monitoring "
-"data."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start Port</emphasis>, <emphasis role=\"bold\">End "
-"Port</emphasis> (TCP, UDP only): A range of listening ports that are the "
-"destination for the incoming traffic. If you are opening a single port, use "
-"the same number in both fields."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Select Tier</emphasis>: Select the tier for which "
-"you want to add this ACL rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">ICMP Type</emphasis>, <emphasis role=\"bold\">ICMP "
-"Code</emphasis> (ICMP only): The type of message and error code that will be"
-" sent."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Traffic Type</emphasis>: Select the traffic type you"
-" want to apply."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Egress</emphasis>: To add an egress rule, select "
-"Egress from the Traffic type drop-down box and click Add. This specifies "
-"what type of traffic is allowed to be sent out of VM instances in this tier."
-" If no egress rules are specified, all traffic from the tier is allowed out "
-"at the VPC virtual router. Once egress rules are specified, only the traffic"
-" specified in egress rules and the responses to any traffic that has been "
-"allowed in through an ingress rule are allowed out. No egress rule is "
-"required for the VMs in a tier to communicate with each other."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Ingress</emphasis>: To add an ingress rule, select "
-"Ingress from the Traffic type drop-down box and click Add. This specifies "
-"what network traffic is allowed into the VM instances in this tier. If no "
-"ingress rules are specified, then no traffic will be allowed in, except for "
-"responses to any traffic that has been allowed out through an egress rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"By default, all incoming and outgoing traffic to the guest networks is "
-"blocked. To open the ports, create a new network ACL."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add. The ACL rule is added."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To view the list of ACL rules you have added, click the desired tier from "
-"the Network ACLs page, then select the Network ACL tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can edit the tags assigned to the ACL rules and delete the ACL rules you"
-" have created. Click the appropriate button in the Actions column."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/configure-guest-traffic-in-advanced-zone.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/configure-guest-traffic-in-advanced-zone.po b/docs/pt-BR/configure-guest-traffic-in-advanced-zone.po
deleted file mode 100644
index 7a8f67f..0000000
--- a/docs/pt-BR/configure-guest-traffic-in-advanced-zone.po
+++ /dev/null
@@ -1,102 +0,0 @@
-# 
-# Translators:
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:38+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configure Guest Traffic in an Advanced Zone"
-msgstr "Configure o tráfego hóspede na zona avançada"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These steps assume you have already logged in to the &PRODUCT; UI. To "
-"configure the base guest network:"
-msgstr "Nestes passos se supõe que você já está logado na interface de usuário do &PRODUCT;. Para configurar a base da rede hóspede:"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In the left navigation, choose Infrastructure. On Zones, click View More, "
-"then click the zone to which you want to add a network."
-msgstr "No painel de navegação à esquerda, selecione Infrastructure. Em Zones, clique View More, então clique a zona à qual você deseja adicionar uma rede."
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Network tab."
-msgstr "Clique na aba Network."
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add guest network."
-msgstr "Clique em Add guest network."
-
-#. Tag: para
-#, no-c-format
-msgid "The Add guest network window is displayed:"
-msgstr "A janela Add guest network é apresentada:"
-
-#. Tag: para
-#, no-c-format
-msgid "Provide the following information:"
-msgstr "Forneça as seguintes informações:"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Name</emphasis>. The name of the network. This will "
-"be user-visible"
-msgstr "<emphasis role=\"bold\">Name</emphasis>. O nome da rede. Isto será visível pelo usuário"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Display Text</emphasis>: The description of the "
-"network. This will be user-visible"
-msgstr "<emphasis role=\"bold\">Display Text</emphasis>: A descrição da rede. Isto será visível pelo usuário"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Zone</emphasis>: The zone in which you are "
-"configuring the guest network."
-msgstr "<emphasis role=\"bold\">Zone</emphasis>: A zona na qual você está configurando a rede hóspede."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Network offering</emphasis>: If the administrator "
-"has configured multiple network offerings, select the one you want to use "
-"for this network"
-msgstr "<emphasis role=\"bold\">Network offering</emphasis>: Se o administrador configurou múltiplas ofertas de rede, selecione a que você deseja usar para esta rede"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest Gateway</emphasis>: The gateway that the "
-"guests should use"
-msgstr "<emphasis role=\"bold\">Guest Gateway</emphasis>: O gateway que os hóspedes devem usar"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest Netmask</emphasis>: The netmask in use on the "
-"subnet the guests will use"
-msgstr "<emphasis role=\"bold\">Guest Netmask</emphasis>: A máscara de rede em uso na subnet que os hóspedes utilizarão"
-
-#. Tag: para
-#, no-c-format
-msgid "Click OK."
-msgstr "Clique em OK."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/configure-public-traffic-in-an-advanced-zone.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/configure-public-traffic-in-an-advanced-zone.po b/docs/pt-BR/configure-public-traffic-in-an-advanced-zone.po
deleted file mode 100644
index 9e81eb2..0000000
--- a/docs/pt-BR/configure-public-traffic-in-an-advanced-zone.po
+++ /dev/null
@@ -1,27 +0,0 @@
-# 
-# Translators:
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-01-30 17:49+0000\n"
-"Last-Translator: ebalter <ebalter@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configure Public Traffic in an Advanced Zone"
-msgstr "Configure o tráfego público na zona avançada"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a zone that uses advanced networking, you need to configure at least one "
-"range of IP addresses for Internet traffic."
-msgstr "Em uma zona que usa rede avançada, você precisa configurar pelo menos um intervalo de endereços IP para tráfego de Internet."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/configure-usage-server.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/configure-usage-server.po b/docs/pt-BR/configure-usage-server.po
deleted file mode 100644
index 8c537ed..0000000
--- a/docs/pt-BR/configure-usage-server.po
+++ /dev/null
@@ -1,276 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:06+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring the Usage Server"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the usage server:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure the Usage Server has been installed. This requires extra steps "
-"beyond just installing the &PRODUCT; software. See Installing the Usage "
-"Server (Optional) in the Advanced Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as administrator."
-msgstr "Faça login na interface de usuário do &PRODUCT; como administrador."
-
-#. Tag: para
-#, no-c-format
-msgid "Click Global Settings."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In Search, type usage. Find the configuration parameter that controls the "
-"behavior you want to set. See the table below for a description of the "
-"available parameters."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In Actions, click the Edit icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Type the desired value and click the Save icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Restart the Management Server (as usual with any global configuration "
-"change) and also the Usage Server:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# service cloud-management restart\n"
-"# service cloud-usage restart \n"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following table shows the global configuration settings that control the"
-" behavior of the Usage Server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Parameter Name"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "Descrição"
-
-#. Tag: para
-#, no-c-format
-msgid "enable.usage.server"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Whether the Usage Server is active."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.aggregation.timezone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Time zone of usage records. Set this if the usage records and daily job "
-"execution are in different time zones. For example, with the following "
-"settings, the usage job will run at PST 00:15 and generate usage records for"
-" the 24 hours from 00:00:00 GMT to 23:59:59 GMT:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"usage.stats.job.exec.time = 00:15\t\n"
-"usage.execution.timezone = PST\n"
-"usage.aggregation.timezone = GMT\n"
-"                        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Valid values for the time zone are specified in <xref linkend=\"time-zones\""
-" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: GMT"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.execution.timezone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time zone of usage.stats.job.exec.time. Valid values for the time zone "
-"are specified in <xref linkend=\"time-zones\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: The time zone of the management server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.sanity.check.interval"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The number of days between sanity checks. Set this in order to periodically "
-"search for records with erroneous data before issuing customer invoices. For"
-" example, this checks for VM usage records created after the VM was "
-"destroyed, and similar checks for templates, volumes, and so on. It also "
-"checks for usage times longer than the aggregation range. If any issue is "
-"found, the alert ALERT_TYPE_USAGE_SANITY_RESULT = 21 is sent."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.aggregation.range"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time period in minutes between Usage Server processing jobs. For "
-"example, if you set it to 1440, the Usage Server will run once per day. If "
-"you set it to 600, it will run every ten hours. In general, when a Usage "
-"Server job runs, it processes all events generated since usage was last run."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There is special handling for the case of 1440 (once per day). In this case "
-"the Usage Server does not necessarily process all records since Usage was "
-"last run. &PRODUCT; assumes that you require processing once per day for the"
-" previous, complete day’s records. For example, if the current day is "
-"October 7, then it is assumed you would like to process records for October "
-"6, from midnight to midnight. &PRODUCT; assumes this “midnight to midnight” "
-"is relative to the usage.execution.timezone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: 1440"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.exec.time"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time when the Usage Server processing will start. It is specified in "
-"24-hour format (HH:MM) in the time zone of the server, which should be GMT. "
-"For example, to start the Usage job at 10:30 GMT, enter “10:30”."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If usage.stats.job.aggregation.range is also set, and its value is not 1440,"
-" then its value will be added to usage.stats.job.exec.time to get the time "
-"to run the Usage Server job again. This is repeated until 24 hours have "
-"elapsed, and the next day's processing begins again at "
-"usage.stats.job.exec.time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: 00:15."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For example, suppose that your server is in GMT, your user population is "
-"predominantly in the East Coast of the United States, and you would like to "
-"process usage records every night at 2 AM local (EST) time. Choose these "
-"settings:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "enable.usage.server = true"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.execution.timezone = America/New_York"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"usage.stats.job.exec.time = 07:00. This will run the Usage job at 2:00 AM "
-"EST. Note that this will shift by an hour as the East Coast of the U.S. "
-"enters and exits Daylight Savings Time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.aggregation.range = 1440"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With this configuration, the Usage job will run every night at 2 AM EST and "
-"will process records for the previous day’s midnight-midnight as defined by "
-"the EST (America/New_York) time zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Because the special value 1440 has been used for "
-"usage.stats.job.aggregation.range, the Usage Server will ignore the data "
-"between midnight and 2 AM. That data will be included in the next day's run."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/pt-BR/configure-vpn.po
----------------------------------------------------------------------
diff --git a/docs/pt-BR/configure-vpn.po b/docs/pt-BR/configure-vpn.po
deleted file mode 100644
index 85e5f9f..0000000
--- a/docs/pt-BR/configure-vpn.po
+++ /dev/null
@@ -1,103 +0,0 @@
-# 
-# Translators:
-# Edgard Balter Jr. <ebalter@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:06+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring VPN"
-msgstr "Configurando VPN"
-
-#. Tag: para
-#, no-c-format
-msgid "To set up VPN for the cloud:"
-msgstr "Para configurar VPN para a nuvem:"
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr "Faça login na interface de usuário do &PRODUCT; como administrador ou usuário final."
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, click Global Settings."
-msgstr "Na barra de navegação à esquerda, clique em Global Settings."
-
-#. Tag: para
-#, no-c-format
-msgid "Set the following global configuration parameters."
-msgstr "Configure os seguintes parâmetros de configuração global."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"remote.access.vpn.client.ip.range – The range of IP addressess to be "
-"allocated to remote access VPN clients. The first IP in the range is used by"
-" the VPN server."
-msgstr "remote.access.vpn.client.ip.range – O intervalo de endereços IP a ser alocados para clientes de acesso remoto VPN. O primeiro IP no intervalo é utilizado pelo servidor VPN."
-
-#. Tag: para
-#, no-c-format
-msgid "remote.access.vpn.psk.length – Length of the IPSec key."
-msgstr "remote.access.vpn.psk.length – Tamanho da chave IPSec."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"remote.access.vpn.user.limit – Maximum number of VPN users per account."
-msgstr "remote.access.vpn.user.limit – Número máximo de usuários VPN por conta."
-
-#. Tag: para
-#, no-c-format
-msgid "To enable VPN for a particular network:"
-msgstr "Para habilitar VPN para uma rede em particular:"
-
-#. Tag: para
-#, no-c-format
-msgid "Log in as a user or administrator to the &PRODUCT; UI."
-msgstr "Faça login na interface de usuário do &PRODUCT; como administrador ou usuário final."
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, click Network."
-msgstr "Na barra de navegação à esquerda, clique em Network."
-
-#. Tag: para
-#, no-c-format
-msgid "Click the name of the network you want to work with."
-msgstr "Clique no nome da rede com a qual você quer trabalhar."
-
-#. Tag: para
-#, no-c-format
-msgid "Click View IP Addresses."
-msgstr "Clique em View IP Addresses."
-
-#. Tag: para
-#, no-c-format
-msgid "Click one of the displayed IP address names."
-msgstr "Clique em um dos endereços IP apresentados."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Enable VPN button. <inlinemediaobject> <imageobject> <imagedata "
-"fileref=\"./images/vpn-icon.png\" /> </imageobject> <textobject> "
-"<phrase>AttachDiskButton.png: button to attach a volume</phrase> "
-"</textobject> </inlinemediaobject>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IPsec key is displayed in a popup window."
-msgstr "A chave IPsec é apresentada em uma janela popup."


Mime
View raw message