cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [30/52] [partial] Revert "CLOUDSTACK-1516: Added .po files for translations"
Date Wed, 20 Mar 2013 09:55:43 GMT
http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/configure-acl.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/configure-acl.po b/docs/ko_KR/configure-acl.po
deleted file mode 100644
index 1f5c1ef..0000000
--- a/docs/ko_KR/configure-acl.po
+++ /dev/null
@@ -1,204 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:37+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring Access Control List"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Define Network Access Control List (ACL) on the VPC virtual router to "
-"control incoming (ingress) and outgoing (egress) traffic between the VPC "
-"tiers, and the tiers and Internet. By default, all incoming and outgoing "
-"traffic to the guest networks is blocked. To open the ports, you must create"
-" a new network ACL. The network ACLs can be created for the tiers only if "
-"the NetworkACL service is supported."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select Network ACLs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Network ACLs page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add Network ACLs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To add an ACL rule, fill in the following fields to specify what kind of "
-"network traffic is allowed in this tier."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">CIDR</emphasis>: The CIDR acts as the Source CIDR "
-"for the Ingress rules, and Destination CIDR for the Egress rules. To accept "
-"traffic only from or to the IP addresses within a particular address block, "
-"enter a CIDR or a comma-separated list of CIDRs. The CIDR is the base IP "
-"address of the incoming traffic. For example, 192.168.0.0/22. To allow all "
-"CIDRs, set to 0.0.0.0/0."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol</emphasis>: The networking protocol that "
-"sources use to send traffic to the tier. The TCP and UDP protocols are "
-"typically used for data exchange and end-user communications. The ICMP "
-"protocol is typically used to send error messages or network monitoring "
-"data."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start Port</emphasis>, <emphasis role=\"bold\">End "
-"Port</emphasis> (TCP, UDP only): A range of listening ports that are the "
-"destination for the incoming traffic. If you are opening a single port, use "
-"the same number in both fields."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Select Tier</emphasis>: Select the tier for which "
-"you want to add this ACL rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">ICMP Type</emphasis>, <emphasis role=\"bold\">ICMP "
-"Code</emphasis> (ICMP only): The type of message and error code that will be"
-" sent."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Traffic Type</emphasis>: Select the traffic type you"
-" want to apply."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Egress</emphasis>: To add an egress rule, select "
-"Egress from the Traffic type drop-down box and click Add. This specifies "
-"what type of traffic is allowed to be sent out of VM instances in this tier."
-" If no egress rules are specified, all traffic from the tier is allowed out "
-"at the VPC virtual router. Once egress rules are specified, only the traffic"
-" specified in egress rules and the responses to any traffic that has been "
-"allowed in through an ingress rule are allowed out. No egress rule is "
-"required for the VMs in a tier to communicate with each other."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Ingress</emphasis>: To add an ingress rule, select "
-"Ingress from the Traffic type drop-down box and click Add. This specifies "
-"what network traffic is allowed into the VM instances in this tier. If no "
-"ingress rules are specified, then no traffic will be allowed in, except for "
-"responses to any traffic that has been allowed out through an egress rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"By default, all incoming and outgoing traffic to the guest networks is "
-"blocked. To open the ports, create a new network ACL."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add. The ACL rule is added."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To view the list of ACL rules you have added, click the desired tier from "
-"the Network ACLs page, then select the Network ACL tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can edit the tags assigned to the ACL rules and delete the ACL rules you"
-" have created. Click the appropriate button in the Actions column."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/configure-usage-server.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/configure-usage-server.po b/docs/ko_KR/configure-usage-server.po
deleted file mode 100644
index ab90f70..0000000
--- a/docs/ko_KR/configure-usage-server.po
+++ /dev/null
@@ -1,276 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:01+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring the Usage Server"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the usage server:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure the Usage Server has been installed. This requires extra steps "
-"beyond just installing the &PRODUCT; software. See Installing the Usage "
-"Server (Optional) in the Advanced Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as administrator."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Global Settings."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In Search, type usage. Find the configuration parameter that controls the "
-"behavior you want to set. See the table below for a description of the "
-"available parameters."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In Actions, click the Edit icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Type the desired value and click the Save icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Restart the Management Server (as usual with any global configuration "
-"change) and also the Usage Server:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# service cloud-management restart\n"
-"# service cloud-usage restart \n"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following table shows the global configuration settings that control the"
-" behavior of the Usage Server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Parameter Name"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "enable.usage.server"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Whether the Usage Server is active."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.aggregation.timezone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Time zone of usage records. Set this if the usage records and daily job "
-"execution are in different time zones. For example, with the following "
-"settings, the usage job will run at PST 00:15 and generate usage records for"
-" the 24 hours from 00:00:00 GMT to 23:59:59 GMT:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"usage.stats.job.exec.time = 00:15\t\n"
-"usage.execution.timezone = PST\n"
-"usage.aggregation.timezone = GMT\n"
-"                        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Valid values for the time zone are specified in <xref linkend=\"time-zones\""
-" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: GMT"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.execution.timezone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time zone of usage.stats.job.exec.time. Valid values for the time zone "
-"are specified in <xref linkend=\"time-zones\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: The time zone of the management server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.sanity.check.interval"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The number of days between sanity checks. Set this in order to periodically "
-"search for records with erroneous data before issuing customer invoices. For"
-" example, this checks for VM usage records created after the VM was "
-"destroyed, and similar checks for templates, volumes, and so on. It also "
-"checks for usage times longer than the aggregation range. If any issue is "
-"found, the alert ALERT_TYPE_USAGE_SANITY_RESULT = 21 is sent."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.aggregation.range"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time period in minutes between Usage Server processing jobs. For "
-"example, if you set it to 1440, the Usage Server will run once per day. If "
-"you set it to 600, it will run every ten hours. In general, when a Usage "
-"Server job runs, it processes all events generated since usage was last run."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There is special handling for the case of 1440 (once per day). In this case "
-"the Usage Server does not necessarily process all records since Usage was "
-"last run. &PRODUCT; assumes that you require processing once per day for the"
-" previous, complete day’s records. For example, if the current day is "
-"October 7, then it is assumed you would like to process records for October "
-"6, from midnight to midnight. &PRODUCT; assumes this “midnight to midnight” "
-"is relative to the usage.execution.timezone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: 1440"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.exec.time"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The time when the Usage Server processing will start. It is specified in "
-"24-hour format (HH:MM) in the time zone of the server, which should be GMT. "
-"For example, to start the Usage job at 10:30 GMT, enter “10:30”."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If usage.stats.job.aggregation.range is also set, and its value is not 1440,"
-" then its value will be added to usage.stats.job.exec.time to get the time "
-"to run the Usage Server job again. This is repeated until 24 hours have "
-"elapsed, and the next day's processing begins again at "
-"usage.stats.job.exec.time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default: 00:15."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For example, suppose that your server is in GMT, your user population is "
-"predominantly in the East Coast of the United States, and you would like to "
-"process usage records every night at 2 AM local (EST) time. Choose these "
-"settings:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "enable.usage.server = true"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.execution.timezone = America/New_York"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"usage.stats.job.exec.time = 07:00. This will run the Usage job at 2:00 AM "
-"EST. Note that this will shift by an hour as the East Coast of the U.S. "
-"enters and exits Daylight Savings Time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "usage.stats.job.aggregation.range = 1440"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With this configuration, the Usage job will run every night at 2 AM EST and "
-"will process records for the previous day’s midnight-midnight as defined by "
-"the EST (America/New_York) time zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Because the special value 1440 has been used for "
-"usage.stats.job.aggregation.range, the Usage Server will ignore the data "
-"between midnight and 2 AM. That data will be included in the next day's run."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/create-vpn-connection-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/create-vpn-connection-vpc.po b/docs/ko_KR/create-vpn-connection-vpc.po
deleted file mode 100644
index f6d88b5..0000000
--- a/docs/ko_KR/create-vpn-connection-vpc.po
+++ /dev/null
@@ -1,153 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:03+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a VPN Connection"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "All the VPCs that you create for the account are listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ASLs"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select Site-to-Site VPN."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Site-to-Site VPN page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"From the Select View drop-down, ensure that VPN Connection is selected."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Create VPN Connection."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Create VPN Connection dialog is displayed:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select the desired customer gateway, then click OK to confirm."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Within a few moments, the VPN Connection is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following information on the VPN connection is displayed:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Address"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateway"
-msgstr "게이트웨이"
-
-#. Tag: para
-#, no-c-format
-msgid "State"
-msgstr "상태"
-
-#. Tag: para
-#, no-c-format
-msgid "IPSec Preshared Key"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IKE Policy"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "ESP Policy"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/create-vpn-gateway-for-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/create-vpn-gateway-for-vpc.po b/docs/ko_KR/create-vpn-gateway-for-vpc.po
deleted file mode 100644
index a5e6e13..0000000
--- a/docs/ko_KR/create-vpn-gateway-for-vpc.po
+++ /dev/null
@@ -1,127 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:03+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a VPN gateway for the VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select Site-to-Site VPN."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are creating the VPN gateway for the first time, selecting Site-to-"
-"Site VPN prompts you to create a VPN gateway."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the confirmation dialog, click Yes to confirm."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Within a few moments, the VPN gateway is created. You will be prompted to "
-"view the details of the VPN gateway you have created. Click Yes to confirm."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following details are displayed in the VPN Gateway page:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Address"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Account"
-msgstr "계정 정보"
-
-#. Tag: para
-#, no-c-format
-msgid "Domain"
-msgstr "도메인"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/creating-network-offerings.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/creating-network-offerings.po b/docs/ko_KR/creating-network-offerings.po
deleted file mode 100644
index a1d2d20..0000000
--- a/docs/ko_KR/creating-network-offerings.po
+++ /dev/null
@@ -1,348 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:03+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a New Network Offering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To create a network offering:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in with admin privileges to the &PRODUCT; UI."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation bar, click Service Offerings."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In Select Offering, choose Network Offering."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add Network Offering."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the dialog, make the following choices:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Name</emphasis>. Any desired name for the network "
-"offering."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Description</emphasis>. A short description of the "
-"offering that can be displayed to users."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Network Rate</emphasis>. Allowed data transfer rate "
-"in MB per second."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest Type</emphasis>. Choose whether the guest "
-"network is isolated or shared."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For a description of this term, see <xref linkend=\"about-virtual-networks\""
-" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For a description of this term, see the Administration Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Persistent</emphasis>. Indicate whether the guest "
-"network is persistent or not. The network that you can provision without "
-"having to deploy a VM on it is termed persistent network. For more "
-"information, see <xref linkend=\"persistent-network\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Specify VLAN</emphasis>. (Isolated guest networks "
-"only) Indicate whether a VLAN should be specified when this offering is "
-"used."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">VPC</emphasis>. This option indicate whether the "
-"guest network is Virtual Private Cloud-enabled. A Virtual Private Cloud "
-"(VPC) is a private, isolated part of &PRODUCT;. A VPC can have its own "
-"virtual network topology that resembles a traditional physical network. For "
-"more information on VPCs, see <xref linkend=\"vpc\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Supported Services</emphasis>. Select one or more of"
-" the possible network services. For some services, you must also choose the "
-"service provider; for example, if you select Load Balancer, you can choose "
-"the &PRODUCT; virtual router or any other load balancers that have been "
-"configured in the cloud. Depending on which services you choose, additional "
-"fields may appear in the rest of the dialog box."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Based on the guest network type selected, you can see the following "
-"supported services:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Supported Services"
-msgstr "기술 지원되는 서비스"
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "Isolated"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Shared"
-msgstr "공유"
-
-#. Tag: para
-#, no-c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"dns-dhcp\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Supported"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "DNS"
-msgstr "DNS"
-
-#. Tag: para
-#, no-c-format
-msgid "Load Balancer"
-msgstr "네트워크 로드 공유 장치"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you select Load Balancer, you can choose the &PRODUCT; virtual router or "
-"any other load balancers that have been configured in the cloud."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Firewall"
-msgstr "방화벽(fire wall)"
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"firewall-rules\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see the Administration Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Source NAT"
-msgstr "전송원 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you select Source NAT, you can choose the &PRODUCT; virtual router or any"
-" other Source NAT providers that have been configured in the cloud."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Static NAT"
-msgstr "정적 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you select Static NAT, you can choose the &PRODUCT; virtual router or any"
-" other Static NAT providers that have been configured in the cloud."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Port Forwarding"
-msgstr "포토 전송"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you select Port Forwarding, you can choose the &PRODUCT; virtual router "
-"or any other Port Forwarding providers that have been configured in the "
-"cloud."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Not Supported"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VPN"
-msgstr "가상 사설망(VPN)"
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"vpn\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "User Data"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"user-data-and-meta-data\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACL"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"configure-acl\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Security Groups"
-msgstr "보안 그룹"
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"add-security-group\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">System Offering</emphasis>. If the service provider "
-"for any of the services selected in Supported Services is a virtual router, "
-"the System Offering field appears. Choose the system service offering that "
-"you want virtual routers to use in this network. For example, if you "
-"selected Load Balancer in Supported Services and selected a virtual router "
-"to provide load balancing, the System Offering field appears so you can "
-"choose between the &PRODUCT; default system service offering and any custom "
-"system service offerings that have been defined by the &PRODUCT; root "
-"administrator."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For more information, see <xref linkend=\"system-service-offerings\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Redundant router capability</emphasis>. Available "
-"only when Virtual Router is selected as the Source NAT provider. Select this"
-" option if you want to use two virtual routers in the network for "
-"uninterrupted connection: one operating as the master virtual router and the"
-" other as the backup. The master virtual router receives requests from and "
-"sends responses to the user’s VM. The backup virtual router is activated "
-"only when the master is down. After the failover, the backup becomes the "
-"master virtual router. &PRODUCT; deploys the routers on different hosts to "
-"ensure reliability if one host is down."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Conserve mode</emphasis>. Indicate whether to use "
-"conserve mode. In this mode, network resources are allocated only when the "
-"first virtual machine starts in the network. When conservative mode is off, "
-"the public IP can only be used for a single service. For example, a public "
-"IP used for a port forwarding rule cannot be used for defining other "
-"services, such as SaticNAT or load balancing. When the conserve mode is on, "
-"you can define more than one service on the same public IP."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If StaticNAT is enabled, irrespective of the status of the conserve mode, no"
-" port forwarding or load balancing rule can be created for the IP. However, "
-"you can add the firewall rules by using the createFirewallRule command."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Tags</emphasis>. Network tag to specify which "
-"physical network to use."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/delete-reset-vpn.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/delete-reset-vpn.po b/docs/ko_KR/delete-reset-vpn.po
deleted file mode 100644
index 606e002..0000000
--- a/docs/ko_KR/delete-reset-vpn.po
+++ /dev/null
@@ -1,134 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-12-03 06:25+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Restarting and Removing a VPN Connection"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ASLs"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select Site-to-Site VPN."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Site-to-Site VPN page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"From the Select View drop-down, ensure that VPN Connection is selected."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "All the VPN connections you created are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select the VPN connection you want to work with."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Details tab is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To remove a VPN connection, click the Delete VPN connection "
-"button<inlinemediaobject> <imageobject> <imagedata fileref=\"./images"
-"/remove-vpn.png\" /> </imageobject> <textobject> <phrase>remove-vpn.png: "
-"button to remove a VPN connection</phrase> </textobject> "
-"</inlinemediaobject>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To restart a VPN connection, click the Reset VPN connection button present "
-"in the Details tab.<inlinemediaobject> <imageobject> <imagedata "
-"fileref=\"./images/reset-vpn.png\" /> </imageobject> <textobject> <phrase"
-">reset-vpn.png: button to reset a VPN connection</phrase> </textobject> "
-"</inlinemediaobject>"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/domains.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/domains.po b/docs/ko_KR/domains.po
deleted file mode 100644
index e26f1b4..0000000
--- a/docs/ko_KR/domains.po
+++ /dev/null
@@ -1,29 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:05+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Domains"
-msgstr "도메인"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the LDAP server requires SSL, you need to enable it in the ldapConfig "
-"command by setting the parameters ssl, truststore, and truststorepass. "
-"Before enabling SSL for ldapConfig, you need to get the certificate which "
-"the LDAP server is using and add it to a trusted keystore. You will need to "
-"know the path to the keystore and the password."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/enable-disable-static-nat-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/enable-disable-static-nat-vpc.po b/docs/ko_KR/enable-disable-static-nat-vpc.po
deleted file mode 100644
index a8c0ba7..0000000
--- a/docs/ko_KR/enable-disable-static-nat-vpc.po
+++ /dev/null
@@ -1,141 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:40+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Enabling or Disabling Static NAT on a VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A static NAT rule maps a public IP address to the private IP address of a VM"
-" in a VPC to allow Internet traffic to it. This section tells how to enable "
-"or disable static NAT for a particular IP address in a VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If port forwarding rules are already in effect for an IP address, you cannot"
-" enable static NAT to that IP."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If a guest VM is part of more than one network, static NAT rules will "
-"function only if they are defined on the default network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select IP Addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IP Addresses page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the IP you want to work with."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In the Details tab,click the Static NAT button.<inlinemediaobject> "
-"<imageobject> <imagedata fileref=\"./images/enable-disable.png\" /> "
-"</imageobject> <textobject> <phrase>enable-disable.png: button to enable "
-"Statid NAT.</phrase> </textobject> </inlinemediaobject>The button toggles "
-"between Enable and Disable, depending on whether static NAT is currently "
-"enabled for the IP address."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "If you are enabling static NAT, a dialog appears as follows:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select the tier and the destination VM, then click Apply."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/event-framework.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/event-framework.po b/docs/ko_KR/event-framework.po
deleted file mode 100644
index 7e6687a..0000000
--- a/docs/ko_KR/event-framework.po
+++ /dev/null
@@ -1,174 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:14+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Event Notification"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Event notification framework provides a means for the Management Server "
-"components to publish and subscribe to &PRODUCT; events. Event notification "
-"is achieved by implementing the concept of event bus abstraction in the "
-"Management Server. An event bus is introduced in the Management Server that "
-"allows the &PRODUCT;components and extension plug-ins to subscribe to the "
-"events by using the Advanced Message Queuing Protocol (AMQP) client. In "
-"&PRODUCT;, a default implementation of event bus is provided as a plug-in "
-"that uses the RabbitMQ AMQP client. The AMQP client pushes the published "
-"events to a compatible AMQP server. Therefore all the &PRODUCT; events are "
-"published to an exchange in the AMQP server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A new event for state change, resource state change, is introduced as part "
-"of Event notification framework. Every resource, such as user VM, volume, "
-"NIC, network, public IP, snapshot, and template, is associated with a state "
-"machine and generates events as part of the state change. That implies that "
-"a change in the state of a resource results in a state change event, and the"
-" event is published in the corresponding state machine on the event bus. All"
-" the &PRODUCT; events (alerts, action events, usage events) and the "
-"additional category of resource state change events, are published on to the"
-" events bus."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Use Cases"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following are some of the use cases:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Usage or Billing Engines: A third-party cloud usage solution can implement a"
-" plug-in that can connects to &PRODUCT; to subscribe to &PRODUCT; events and"
-" generate usage data. The usage data is consumed by their usage software."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"AMQP plug-in can place all the events on the a message queue, then a AMQP "
-"message broker can provide topic-based notification to the subscribers."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Publish and Subscribe notification service can be implemented as a pluggable"
-" service in &PRODUCT; that can provide rich set of APIs for event "
-"notification, such as topics-based subscription and notification. "
-"Additionally, the pluggable service can deal with multi-tenancy, "
-"authentication, and authorization issues."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuration"
-msgstr "구성"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"As a &PRODUCT; administrator, perform the following one-time configuration "
-"to enable event notification framework. At run time no changes can control "
-"the behaviour."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Open <filename>'componentContext.xml</filename>."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Define a bean named <filename>eventNotificationBus</filename> as follows:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "name : Specify a name for the bean."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "server : The name or the IP address of the RabbitMQ AMQP server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "port : The port on which RabbitMQ server is running."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"username : The username associated with the account to access the RabbitMQ "
-"server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"password : The password associated with the username of the account to "
-"access the RabbitMQ server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"exchange : The exchange name on the RabbitMQ server where &PRODUCT; events "
-"are published."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "A sample bean is given below:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"&lt;bean id=\"eventNotificationBus\" class=\"org.apache.cloudstack.mom.rabbitmq.RabbitMQEventBus\"&gt;\n"
-"    &lt;property name=\"name\" value=\"eventNotificationBus\"/&gt;\n"
-"    &lt;property name=\"server\" value=\"127.0.0.1\"/&gt;\n"
-"    &lt;property name=\"port\" value=\"5672\"/&gt;\n"
-"    &lt;property name=\"username\" value=\"guest\"/&gt;\n"
-"    &lt;property name=\"password\" value=\"guest\"/&gt;\n"
-"   &lt;property name=\"exchange\" value=\"cloudstack-events\"/&gt;\n"
-"   &lt;/bean&gt;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The <filename>eventNotificationBus</filename> bean represents the "
-"<filename>org.apache.cloudstack.mom.rabbitmq.RabbitMQEventBus</filename> "
-"class."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Restart the Management Server."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/events.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/events.po b/docs/ko_KR/events.po
deleted file mode 100644
index 4704f84..0000000
--- a/docs/ko_KR/events.po
+++ /dev/null
@@ -1,31 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:12+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Events"
-msgstr "이벤트"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"An event is essentially a significant or meaningful change in the state of "
-"both virtual and physical resources associated with a cloud environment. "
-"Events are used by monitoring systems, usage and billing systems, or any "
-"other event-driven workflow systems to discern a pattern and make the right "
-"business decision. In &PRODUCT; an event could be a state change of virtual "
-"or psychical resources, an action performed by an user (action events), or "
-"policy based events (alerts)."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/guest-traffic.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/guest-traffic.po b/docs/ko_KR/guest-traffic.po
deleted file mode 100644
index 506e799..0000000
--- a/docs/ko_KR/guest-traffic.po
+++ /dev/null
@@ -1,60 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:13+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Guest Traffic"
-msgstr "게스트 트래픽"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A network can carry guest traffic only between VMs within one zone. Virtual "
-"machines in different zones cannot communicate with each other using their "
-"IP addresses; they must communicate with each other by routing through a "
-"public IP address."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "This figure illustrates a typical guest traffic setup:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The Management Server automatically creates a virtual router for each "
-"network. A virtual router is a special virtual machine that runs on the "
-"hosts. Each virtual router has three network interfaces. Its eth0 interface "
-"serves as the gateway for the guest traffic and has the IP address of "
-"10.1.1.1. Its eth1 interface is used by the system to configure the virtual "
-"router. Its eth2 interface is assigned a public IP address for public "
-"traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The virtual router provides DHCP and will automatically assign an IP address"
-" for each guest VM within the IP range assigned for the network. The user "
-"can manually reconfigure guest VMs to assume different IP addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Source NAT is automatically configured in the virtual router to forward "
-"outbound traffic for all guest VMs"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/hypervisor-support-for-primarystorage.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/hypervisor-support-for-primarystorage.po b/docs/ko_KR/hypervisor-support-for-primarystorage.po
deleted file mode 100644
index 84690ad..0000000
--- a/docs/ko_KR/hypervisor-support-for-primarystorage.po
+++ /dev/null
@@ -1,172 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 05:15+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Hypervisor Support for Primary Storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following table shows storage options and parameters for different "
-"hypervisors."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMware vSphere"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Citrix XenServer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "KVM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\"><emphasis role=\"bold\">Format for Disks, Templates,"
-" and Snapshots</emphasis></emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMDK"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VHD"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "QCOW2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">iSCSI support</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMFS"
-msgstr "VMFS"
-
-#. Tag: para
-#, no-c-format
-msgid "Clustered LVM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Yes, via Shared Mountpoint"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Fiber Channel support</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Yes, via Existing SR"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">NFS support</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Y"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Local storage support</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Storage over-provisioning</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "NFS and iSCSI"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "NFS"
-msgstr "NFS"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"XenServer uses a clustered LVM system to store VM images on iSCSI and Fiber "
-"Channel volumes and does not support over-provisioning in the hypervisor. "
-"The storage server itself, however, can support thin-provisioning. As a "
-"result the &PRODUCT; can still support storage over-provisioning by running "
-"on thin-provisioned storage volumes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"KVM supports \"Shared Mountpoint\" storage. A shared mountpoint is a file "
-"system path local to each server in a given cluster. The path must be the "
-"same across all Hosts in the cluster, for example /mnt/primary1. This shared"
-" mountpoint is assumed to be a clustered filesystem such as OCFS2. In this "
-"case the &PRODUCT; does not attempt to mount or unmount the storage as is "
-"done with NFS. The &PRODUCT; requires that the administrator insure that the"
-" storage is available"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With NFS storage, &PRODUCT; manages the overprovisioning. In this case the "
-"global configuration parameter storage.overprovisioning.factor controls the "
-"degree of overprovisioning. This is independent of hypervisor type."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Local storage is an option for primary storage for vSphere, XenServer, and "
-"KVM. When the local disk option is enabled, a local disk storage pool is "
-"automatically created on each host. To use local storage for the System "
-"Virtual Machines (such as the Virtual Router), set "
-"system.vm.use.local.storage to true in global configuration."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; supports multiple primary storage pools in a Cluster. For example,"
-" you could provision 2 NFS servers in primary storage. Or you could "
-"provision 1 iSCSI LUN initially and then add a second iSCSI LUN when the "
-"first approaches capacity."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/ip-load-balancing.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/ip-load-balancing.po b/docs/ko_KR/ip-load-balancing.po
deleted file mode 100644
index 31bc845..0000000
--- a/docs/ko_KR/ip-load-balancing.po
+++ /dev/null
@@ -1,48 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 05:16+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "IP Load Balancing"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The user may choose to associate the same public IP for multiple guests. "
-"&PRODUCT; implements a TCP-level load balancer with the following policies."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Round-robin"
-msgstr "라운드 로빈"
-
-#. Tag: para
-#, no-c-format
-msgid "Least connection"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Source IP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This is similar to port forwarding but the destination may be multiple IP "
-"addresses."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/log-in.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/log-in.po b/docs/ko_KR/log-in.po
deleted file mode 100644
index e425bf1..0000000
--- a/docs/ko_KR/log-in.po
+++ /dev/null
@@ -1,97 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 18:39+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Log In to the UI"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; provides a web-based UI that can be used by both administrators "
-"and end users. The appropriate version of the UI is displayed depending on "
-"the credentials used to log in. The UI is available in popular browsers "
-"including IE7, IE8, IE9, Firefox 3.5+, Firefox 4, Safari 4, and Safari 5. "
-"The URL is: (substitute your own management server IP address)"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "http://&lt;management-server-ip-address&gt;:8080/client"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"On a fresh Management Server installation, a guided tour splash screen "
-"appears. On later visits, you’ll see a login screen where you specify the "
-"following to proceed to your Dashboard:"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Username"
-msgstr "사용자명"
-
-#. Tag: para
-#, no-c-format
-msgid "The user ID of your account. The default username is admin."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Password"
-msgstr "암호"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The password associated with the user ID. The password for the default "
-"username is password."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Domain"
-msgstr "도메인"
-
-#. Tag: para
-#, no-c-format
-msgid "If you are a root user, leave this field blank."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are a user in the sub-domains, enter the full path to the domain, "
-"excluding the root domain."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For example, suppose multiple levels are created under the root domain, such"
-" as Comp1/hr. The users in the Comp1 domain should enter Comp1 in the Domain"
-" field, whereas the users in the Comp1/sales domain should enter "
-"Comp1/sales."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For more guidance about the choices that appear when you log in to this UI, "
-"see Logging In as the Root Administrator."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/management-server-lb.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/management-server-lb.po b/docs/ko_KR/management-server-lb.po
deleted file mode 100644
index 8ca06f1..0000000
--- a/docs/ko_KR/management-server-lb.po
+++ /dev/null
@@ -1,100 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2013-02-02 18:44+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Setting Zone VLAN and Running VM Maximums"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; can use a load balancer to provide a virtual IP for multiple "
-"Management Servers. The administrator is responsible for creating the load "
-"balancer rules for the Management Servers. The application requires "
-"persistence or stickiness across multiple sessions. The following chart "
-"lists the ports that should be load balanced and whether or not persistence "
-"is required."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Even if persistence is not required, enabling it is permitted."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Source Port"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Destination Port"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Protocol"
-msgstr "프로토콜"
-
-#. Tag: para
-#, no-c-format
-msgid "Persistence Required?"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "80 or 443"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "8080 (or 20400 with AJP)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "HTTP (or AJP)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Yes"
-msgstr "예"
-
-#. Tag: para
-#, no-c-format
-msgid "8250"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "TCP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "8096"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "HTTP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "No"
-msgstr "아니오"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/network-offerings.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/network-offerings.po b/docs/ko_KR/network-offerings.po
deleted file mode 100644
index effc98b..0000000
--- a/docs/ko_KR/network-offerings.po
+++ /dev/null
@@ -1,132 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 18:41+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Network Offerings"
-msgstr "네트워크 제공"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For the most up-to-date list of supported network services, see the "
-"&PRODUCT; UI or call listNetworkServices."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "A network offering is a named set of network services, such as:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#. Tag: para
-#, no-c-format
-msgid "DNS"
-msgstr "DNS"
-
-#. Tag: para
-#, no-c-format
-msgid "Source NAT"
-msgstr "전송원 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid "Static NAT"
-msgstr "정적 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid "Port Forwarding"
-msgstr "포토 전송"
-
-#. Tag: para
-#, no-c-format
-msgid "Load Balancing"
-msgstr "네트워크 로드 공유"
-
-#. Tag: para
-#, no-c-format
-msgid "Firewall"
-msgstr "방화벽(fire wall)"
-
-#. Tag: para
-#, no-c-format
-msgid "VPN"
-msgstr "가상 사설망(VPN)"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Optional) Name one of several available providers to use for a given "
-"service, such as Juniper for the firewall"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "(Optional) Network tag to specify which physical network to use"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When creating a new VM, the user chooses one of the available network "
-"offerings, and that determines which network services the VM can use."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The &PRODUCT; administrator can create any number of custom network "
-"offerings, in addition to the default network offerings provided by "
-"&PRODUCT;. By creating multiple custom network offerings, you can set up "
-"your cloud to offer different classes of service on a single multi-tenant "
-"physical network. For example, while the underlying physical wiring may be "
-"the same for two tenants, tenant A may only need simple firewall protection "
-"for their website, while tenant B may be running a web server farm and "
-"require a scalable firewall solution, load balancing solution, and alternate"
-" networks for accessing the database backend."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you create load balancing rules while using a network service offering "
-"that includes an external load balancer device such as NetScaler, and later "
-"change the network service offering to one that uses the &PRODUCT; virtual "
-"router, you must create a firewall rule on the virtual router for each of "
-"your existing load balancing rules so that they continue to function."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When creating a new virtual network, the &PRODUCT; administrator chooses "
-"which network offering to enable for that network. Each virtual network is "
-"associated with one network offering. A virtual network can be upgraded or "
-"downgraded by changing its associated network offering. If you do this, be "
-"sure to reprogram the physical network to match."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; also has internal network offerings for use by &PRODUCT; system "
-"VMs. These network offerings are not visible to users but can be modified by"
-" administrators."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/network-rate.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/network-rate.po b/docs/ko_KR/network-rate.po
deleted file mode 100644
index 23f899f..0000000
--- a/docs/ko_KR/network-rate.po
+++ /dev/null
@@ -1,239 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2013-02-02 18:45+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Network Throttling"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Network throttling is the process of controlling the network access and "
-"bandwidth usage based on certain rules. &PRODUCT; controls this behaviour of"
-" the guest networks in the cloud by using the network rate parameter. This "
-"parameter is defined as the default data transfer rate in Mbps (Megabits Per"
-" Second) allowed in a guest network. It defines the upper limits for network"
-" utilization. If the current utilization is below the allowed upper limits, "
-"access is granted, else revoked."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can throttle the network bandwidth either to control the usage above a "
-"certain limit for some accounts, or to control network congestion in a large"
-" cloud environment. The network rate for your cloud can be configured on the"
-" following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network Offering"
-msgstr "네트워크 제공"
-
-#. Tag: para
-#, no-c-format
-msgid "Service Offering"
-msgstr "서비스제공"
-
-#. Tag: para
-#, no-c-format
-msgid "Global parameter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If network rate is set to NULL in service offering, the value provided in "
-"the vm.network.throttling.rate global parameter is applied. If the value is "
-"set to NULL for network offering, the value provided in the "
-"network.throttling.rate global parameter is considered."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For the default public, storage, and management networks, network rate is "
-"set to 0. This implies that the public, storage, and management networks "
-"will have unlimited bandwidth by default. For default guest networks, "
-"network rate is set to NULL. In this case, network rate is defaulted to the "
-"global parameter value."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following table gives you an overview of how network rate is applied on "
-"different types of networks in &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Networks"
-msgstr "네트워크"
-
-#. Tag: para
-#, no-c-format
-msgid "Network Rate Is Taken from"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Guest network of Virtual Router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Guest Network Offering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Public network of Virtual Router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Storage network of Secondary Storage VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "System Network Offering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Management network of Secondary Storage VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Storage network of Console Proxy VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Management network of Console Proxy VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Storage network of Virtual Router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Management network of Virtual Router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Public network of Secondary Storage VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Public network of Console Proxy VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Default network of a guest VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Compute Offering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Additional networks of a guest VM"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Corresponding Network Offerings"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A guest VM must have a default network, and can also have many additional "
-"networks. Depending on various parameters, such as the host and virtual "
-"switch used, you can observe a difference in the network rate in your cloud."
-" For example, on a VMware host the actual network rate varies based on where"
-" they are configured (compute offering, network offering, or both); the "
-"network type (shared or isolated); and traffic direction (ingress or "
-"egress)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The network rate set for a network offering used by a particular network in "
-"&PRODUCT; is used for the traffic shaping policy of a port group, for "
-"example: port group A, for that network: a particular subnet or VLAN on the "
-"actual network. The virtual routers for that network connects to the port "
-"group A, and by default instances in that network connects to this port "
-"group. However, if an instance is deployed with a compute offering with the "
-"network rate set, and if this rate is used for the traffic shaping policy of"
-" another port group for the network, for example port group B, then "
-"instances using this compute offering are connected to the port group B, "
-"instead of connecting to port group A."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The traffic shaping policy on standard port groups in VMware only applies to"
-" the egress traffic, and the net effect depends on the type of network used "
-"in &PRODUCT;. In shared networks, ingress traffic is unlimited for "
-"&PRODUCT;, and egress traffic is limited to the rate that applies to the "
-"port group used by the instance if any. If the compute offering has a "
-"network rate configured, this rate applies to the egress traffic, otherwise "
-"the network rate set for the network offering applies. For isolated "
-"networks, the network rate set for the network offering, if any, effectively"
-" applies to the ingress traffic. This is mainly because the network rate set"
-" for the network offering applies to the egress traffic from the virtual "
-"router to the instance. The egress traffic is limited by the rate that "
-"applies to the port group used by the instance if any, similar to shared "
-"networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For example:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network rate of network offering = 10 Mbps"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network rate of compute offering = 200 Mbps"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In shared networks, ingress traffic will not be limited for &PRODUCT;, while"
-" egress traffic will be limited to 200 Mbps. In an isolated network, ingress"
-" traffic will be limited to 10 Mbps and egress to 200 Mbps."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/network-service-providers.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/network-service-providers.po b/docs/ko_KR/network-service-providers.po
deleted file mode 100644
index 635c2d6..0000000
--- a/docs/ko_KR/network-service-providers.po
+++ /dev/null
@@ -1,146 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 18:41+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Network Service Providers"
-msgstr "네트워크 서비스 제공자"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For the most up-to-date list of supported network service providers, see the"
-" &PRODUCT; UI or call listNetworkServiceProviders."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A service provider (also called a network element) is hardware or virtual "
-"appliance that makes a network service possible; for example, a firewall "
-"appliance can be installed in the cloud to provide firewall service. On a "
-"single network, multiple providers can provide the same network service. For"
-" example, a firewall service may be provided by Cisco or Juniper devices in "
-"the same physical network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can have multiple instances of the same service provider in a network "
-"(say, more than one Juniper SRX device)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If different providers are set up to provide the same service on the "
-"network, the administrator can create network offerings so users can specify"
-" which network service provider they prefer (along with the other choices "
-"offered in network offerings). Otherwise, &PRODUCT; will choose which "
-"provider to use whenever the service is called for."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Supported Network Service Providers"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; ships with an internal list of the supported service providers, "
-"and you can choose from this list when creating a network offering."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Virtual Router"
-msgstr "가상 라우터"
-
-#. Tag: para
-#, no-c-format
-msgid "Citrix NetScaler"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Juniper SRX"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "F5 BigIP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Host based (KVM/Xen)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Remote Access VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Yes"
-msgstr "예"
-
-#. Tag: para
-#, no-c-format
-msgid "No"
-msgstr "아니오"
-
-#. Tag: para
-#, no-c-format
-msgid "DNS/DHCP/User Data"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Firewall"
-msgstr "방화벽(fire wall)"
-
-#. Tag: para
-#, no-c-format
-msgid "Load Balancing"
-msgstr "네트워크 로드 공유"
-
-#. Tag: para
-#, no-c-format
-msgid "Elastic IP"
-msgstr "탄력적 IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Elastic LB"
-msgstr "탄력적 네트워크 로드 공유"
-
-#. Tag: para
-#, no-c-format
-msgid "Source NAT"
-msgstr "전송원 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid "Static NAT"
-msgstr "정적 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid "Port Forwarding"
-msgstr "포토 전송"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/offerings.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/offerings.po b/docs/ko_KR/offerings.po
deleted file mode 100644
index a0d9a2f..0000000
--- a/docs/ko_KR/offerings.po
+++ /dev/null
@@ -1,27 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2013-02-02 18:45+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Service Offerings"
-msgstr "서비스제공"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In this chapter we discuss compute, disk, and system service offerings. "
-"Network offerings are discussed in the section on setting up networking for "
-"users."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/physical-network-configuration-settings.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/physical-network-configuration-settings.po b/docs/ko_KR/physical-network-configuration-settings.po
deleted file mode 100644
index 402070f..0000000
--- a/docs/ko_KR/physical-network-configuration-settings.po
+++ /dev/null
@@ -1,69 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 20:01+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configurable Characteristics of Physical Networks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; provides configuration settings you can use to set up a physical "
-"network in a zone, including:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"What type of network traffic it carries (guest, public, management, storage)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VLANs"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Unique name that the hypervisor can use to find that particular network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Enabled or disabled. When a network is first set up, it is disabled – not in"
-" use yet. The administrator sets the physical network to enabled, and it "
-"begins to be used. The administrator can later disable the network again, "
-"which prevents any new virtual networks from being created on that physical "
-"network; the existing network traffic continues even though the state is "
-"disabled."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Speed"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Tags, so network offerings can be matched to physical networks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Isolation method"
-msgstr "분리 방법"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/port-forwarding.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/port-forwarding.po b/docs/ko_KR/port-forwarding.po
deleted file mode 100644
index 232104f..0000000
--- a/docs/ko_KR/port-forwarding.po
+++ /dev/null
@@ -1,129 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2013-03-19 14:10+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Port Forwarding"
-msgstr "포토 전송"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A port forward service is a set of port forwarding rules that define a "
-"policy. A port forward service is then applied to one or more guest VMs. The"
-" guest VM then has its inbound network access managed according to the "
-"policy defined by the port forwarding service. You can optionally specify "
-"one or more CIDRs to filter the source IPs. This is useful when you want to "
-"allow only incoming requests from certain IP addresses to be forwarded."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A guest VM can be in any number of port forward services. Port forward "
-"services can be defined but have no members. If a guest VM is part of more "
-"than one network, port forwarding rules will function only if they are "
-"defined on the default network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You cannot use port forwarding to open ports for an elastic IP address. When"
-" elastic IP is used, outside access is instead controlled through the use of"
-" security groups. See Security Groups."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To set up port forwarding:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you have not already done so, add a public IP address range to a zone in "
-"&PRODUCT;. See Adding a Zone and Pod in the Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Add one or more VM instances to &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation bar, click Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the name of the guest network where the VMs are running."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Choose an existing IP address or acquire a new IP address. See <xref linkend"
-"=\"acquire-new-ip-address\" />. Click the name of the IP address in the "
-"list."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Configuration tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Port Forwarding node of the diagram, click View All."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Fill in the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public Port</emphasis>. The port to which public "
-"traffic will be addressed on the IP address you acquired in the previous "
-"step."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Private Port</emphasis>. The port on which the "
-"instance is listening for forwarded public traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol</emphasis>. The communication protocol in "
-"use between the two ports"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/primary-storage-add.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/primary-storage-add.po b/docs/ko_KR/primary-storage-add.po
deleted file mode 100644
index c8f3edd..0000000
--- a/docs/ko_KR/primary-storage-add.po
+++ /dev/null
@@ -1,228 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 20:01+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Add Primary Storage"
-msgstr "기본 스토리지 추가"
-
-#. Tag: title
-#, no-c-format
-msgid "System Requirements for Primary Storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Hardware requirements:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Any standards-compliant iSCSI or NFS server that is supported by the "
-"underlying hypervisor."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The storage server should be a machine with a large number of disks. The "
-"disks should ideally be managed by a hardware RAID controller."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Minimum required capacity depends on your needs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "When setting up primary storage, follow these restrictions:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Primary storage cannot be added until a host has been added to the cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you do not provision shared primary storage, you must set the global "
-"configuration parameter system.vm.local.storage.required to true, or else "
-"you will not be able to start VMs."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Adding Primary Stroage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you create a new zone, the first primary storage is added as part of "
-"that procedure. You can add primary storage servers at any time, such as "
-"when adding a new cluster or adding more servers to an existing cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure there is nothing stored on the server. Adding the server to "
-"&PRODUCT; will destroy any existing data."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI (see <xref linkend=\"log-in\" />)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In the left navigation, choose Infrastructure. In Zones, click View More, "
-"then click the zone in which you want to add the primary storage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Compute tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Primary Storage node of the diagram, click View All."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add Primary Storage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Provide the following information in the dialog. The information required "
-"varies depending on your choice in Protocol."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Pod.</emphasis> The pod for the storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Cluster.</emphasis> The cluster for the storage "
-"device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Name.</emphasis> The name of the storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol.</emphasis> For XenServer, choose either "
-"NFS, iSCSI, or PreSetup. For KVM, choose NFS or SharedMountPoint. For "
-"vSphere choose either VMFS (iSCSI or FiberChannel) or NFS."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Server (for NFS, iSCSI, or PreSetup).</emphasis> The"
-" IP address or DNS name of the storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Server (for VMFS).</emphasis> The IP address or DNS "
-"name of the vCenter server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path (for NFS).</emphasis> In NFS this is the "
-"exported path from the server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path (for VMFS).</emphasis> In vSphere this is a "
-"combination of the datacenter name and the datastore name. The format is "
-"\"/\" datacenter name \"/\" datastore name. For example, "
-"\"/cloud.dc.VM/cluster1datastore\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path (for SharedMountPoint).</emphasis> With KVM "
-"this is the path on each host that is where this primary storage is mounted."
-" For example, \"/mnt/primary\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">SR Name-Label (for PreSetup).</emphasis> Enter the "
-"name-label of the SR that has been set up outside &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Target IQN (for iSCSI).</emphasis> In iSCSI this is "
-"the IQN of the target. For example, "
-"iqn.1986-03.com.sun:02:01ec9bb549-1271378984."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Lun # (for iSCSI).</emphasis> In iSCSI this is the "
-"LUN number. For example, 3."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Tags (optional).</emphasis> The comma-separated list"
-" of tags for this storage device. It should be an equivalent set or superset"
-" of the tags on your disk offerings.."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The tag sets on primary storage across clusters in a Zone must be identical."
-" For example, if cluster A provides primary storage that has tags T1 and T2,"
-" all other clusters in the Zone must also provide primary storage that has "
-"tags T1 and T2."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click OK."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/primary-storage.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/primary-storage.po b/docs/ko_KR/primary-storage.po
deleted file mode 100644
index 933d935..0000000
--- a/docs/ko_KR/primary-storage.po
+++ /dev/null
@@ -1,32 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 20:02+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Primary Storage"
-msgstr "기본 스토리지"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This section gives concepts and technical details about &PRODUCT; primary "
-"storage. For information about how to install and configure primary storage "
-"through the &PRODUCT; UI, see the Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"about-primary-storage\" />"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/query-filter.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/query-filter.po b/docs/ko_KR/query-filter.po
deleted file mode 100644
index 0fd67e0..0000000
--- a/docs/ko_KR/query-filter.po
+++ /dev/null
@@ -1,110 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:04\n"
-"PO-Revision-Date: 2012-09-24 20:02+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Query Filter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The query filter is used to find a mapped user in the external LDAP server. "
-"The query filter should uniquely map the &PRODUCT; user to LDAP user for a "
-"meaningful authentication. For more information about query filter syntax, "
-"consult the documentation for your LDAP server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The &PRODUCT; query filter wildcards are:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Query Filter Wildcard"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "%u"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "User name"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "%e"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Email address"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "%n"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "First and last name"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following examples assume you are using Active Directory, and refer to "
-"user attributes from the Active Directory schema."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "If the &PRODUCT; user name is the same as the LDAP user ID:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "(uid=%u)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "If the &PRODUCT; user name is the LDAP display name:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "(displayName=%u)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To find a user by email address:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "(mail=%e)"
-msgstr ""


Mime
View raw message