cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [31/52] [partial] Revert "CLOUDSTACK-1516: Added .po files for translations"
Date Wed, 20 Mar 2013 09:55:44 GMT
http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/basic-zone-configuration.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/basic-zone-configuration.po b/docs/ko_KR/basic-zone-configuration.po
deleted file mode 100644
index d83c570..0000000
--- a/docs/ko_KR/basic-zone-configuration.po
+++ /dev/null
@@ -1,492 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:47+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Basic Zone Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After you select Basic in the Add Zone wizard and click Next, you will be "
-"asked to enter the following details. Then click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Name.</emphasis> A name for the zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">DNS 1 and 2.</emphasis> These are DNS servers for "
-"use by guest VMs in the zone. These DNS servers will be accessed via the "
-"public network you will add later. The public IP addresses for the zone must"
-" have a route to the DNS server named here."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Internal DNS 1 and Internal DNS 2.</emphasis> These "
-"are DNS servers for use by system VMs in the zone (these are VMs used by "
-"&PRODUCT; itself, such as virtual routers, console proxies, and Secondary "
-"Storage VMs.) These DNS servers will be accessed via the management traffic "
-"network interface of the System VMs. The private IP address you provide for "
-"the pods must have a route to the internal DNS server named here."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Hypervisor.</emphasis> (Introduced in version 3.0.1)"
-" Choose the hypervisor for the first cluster in the zone. You can add "
-"clusters with different hypervisors later, after you finish adding the zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Network Offering.</emphasis> Your choice here "
-"determines what network services will be available on the network for guest "
-"VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network Offering"
-msgstr "네트워크 제공"
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "DefaultSharedNetworkOfferingWithSGService"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you want to enable security groups for guest traffic isolation, choose "
-"this. (See Using Security Groups to Control Traffic to VMs.)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "DefaultSharedNetworkOffering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "If you do not need security groups, choose this."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "DefaultSharedNetscalerEIPandELBNetworkOffering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you have installed a Citrix NetScaler appliance as part of your zone "
-"network, and you will be using its Elastic IP and Elastic Load Balancing "
-"features, choose this. With the EIP and ELB features, a basic zone with "
-"security groups enabled can offer 1:1 static NAT and load balancing."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Network Domain.</emphasis> (Optional) If you want to"
-" assign a special domain name to the guest VM network, specify the DNS "
-"suffix."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public.</emphasis> A public zone is available to all"
-" users. A zone that is not public will be assigned to a particular domain. "
-"Only users in that domain will be allowed to create guest VMs in this zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Choose which traffic types will be carried by the physical network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The traffic types are management, public, guest, and storage traffic. For "
-"more information about the types, roll over the icons to display their tool "
-"tips, or see Basic Zone Network Traffic Types. This screen starts out with "
-"some traffic types already assigned. To add more, drag and drop traffic "
-"types onto the network. You can also change the network name if desired."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"3. (Introduced in version 3.0.1) Assign a network traffic label to each "
-"traffic type on the physical network. These labels must match the labels you"
-" have already defined on the hypervisor host. To assign each label, click "
-"the Edit button under the traffic type icon. A popup dialog appears where "
-"you can type the label, then click OK."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These traffic labels will be defined only for the hypervisor selected for "
-"the first cluster. For all other hypervisors, the labels can be configured "
-"after the zone is created."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"(NetScaler only) If you chose the network offering for NetScaler, you have "
-"an additional screen to fill out. Provide the requested details to set up "
-"the NetScaler, then click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">IP address.</emphasis> The NSIP (NetScaler IP) "
-"address of the NetScaler device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Username/Password.</emphasis> The authentication "
-"credentials to access the device. &PRODUCT; uses these credentials to access"
-" the device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Type.</emphasis> NetScaler device type that is being"
-" added. It could be NetScaler VPX, NetScaler MPX, or NetScaler SDX. For a "
-"comparison of the types, see About Using a NetScaler Load Balancer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public interface.</emphasis> Interface of NetScaler "
-"that is configured to be part of the public network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Private interface.</emphasis> Interface of NetScaler"
-" that is configured to be part of the private network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Number of retries.</emphasis> Number of times to "
-"attempt a command on the device before considering the operation failed. "
-"Default is 2."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Capacity.</emphasis> Number of guest "
-"networks/accounts that will share this NetScaler device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Dedicated.</emphasis> When marked as dedicated, this"
-" device will be dedicated to a single account. When Dedicated is checked, "
-"the value in the Capacity field has no significance – implicitly, its value "
-"is 1."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"(NetScaler only) Configure the IP range for public traffic. The IPs in this "
-"range will be used for the static NAT capability which you enabled by "
-"selecting the network offering for NetScaler with EIP and ELB. Enter the "
-"following details, then click Add. If desired, you can repeat this step to "
-"add more IP ranges. When done, click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Gateway.</emphasis> The gateway in use for these IP "
-"addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Netmask.</emphasis> The netmask associated with this"
-" IP range."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">VLAN.</emphasis> The VLAN that will be used for "
-"public traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start IP/End IP.</emphasis> A range of IP addresses "
-"that are assumed to be accessible from the Internet and will be allocated "
-"for access to guest VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new zone, &PRODUCT; adds the first pod for you. You can always add more"
-" pods later. For an overview of what a pod is, see <xref linkend=\"about-"
-"pods\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first pod, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Pod Name.</emphasis> A name for the pod."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Reserved system gateway.</emphasis> The gateway for "
-"the hosts in that pod."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Reserved system netmask.</emphasis> The network "
-"prefix that defines the pod's subnet. Use CIDR notation."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start/End Reserved System IP.</emphasis> The IP "
-"range in the management network that &PRODUCT; uses to manage various system"
-" VMs, such as Secondary Storage VMs, Console Proxy VMs, and DHCP. For more "
-"information, see System Reserved IP Addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Configure the network for guest traffic. Provide the following, then click "
-"Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest gateway.</emphasis> The gateway that the "
-"guests should use."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest netmask.</emphasis> The netmask in use on the "
-"subnet the guests will use."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest start IP/End IP.</emphasis> Enter the first "
-"and last IP addresses that define a range that &PRODUCT; can assign to "
-"guests."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"We strongly recommend the use of multiple NICs. If multiple NICs are used, "
-"they may be in a different subnet."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If one NIC is used, these IPs should be in the same CIDR as the pod CIDR."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new pod, &PRODUCT; adds the first cluster for you. You can always add "
-"more clusters later. For an overview of what a cluster is, see About "
-"Clusters."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first cluster, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Hypervisor.</emphasis> (Version 3.0.0 only; in "
-"3.0.1, this field is read only) Choose the type of hypervisor software that "
-"all hosts in this cluster will run. If you choose VMware, additional fields "
-"appear so you can give information about a vSphere cluster. For vSphere "
-"servers, we recommend creating the cluster of hosts in vCenter and then "
-"adding the entire cluster to &PRODUCT;. See Add Cluster: vSphere."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Cluster name.</emphasis> Enter a name for the "
-"cluster. This can be text of your choosing and is not used by &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new cluster, &PRODUCT; adds the first host for you. You can always add "
-"more hosts later. For an overview of what a host is, see About Hosts."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you add a hypervisor host to &PRODUCT;, the host must not have any VMs "
-"already running."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Before you can configure the host, you need to install the hypervisor "
-"software on the host. You will need to know which version of the hypervisor "
-"software version is supported by &PRODUCT; and what additional configuration"
-" is required to ensure the host will work with &PRODUCT;. To find these "
-"installation details, see:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Citrix XenServer Installation and Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMware vSphere Installation and Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "KVM vSphere Installation and Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first host, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Host Name.</emphasis> The DNS name or IP address of "
-"the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Username.</emphasis> The username is root."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Password.</emphasis> This is the password for the "
-"user named above (from your XenServer or KVM install)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Host Tags.</emphasis> (Optional) Any labels that you"
-" use to categorize hosts for ease of maintenance. For example, you can set "
-"this to the cloud's HA tag (set in the ha.tag global configuration "
-"parameter) if you want this host to be used only for VMs with the \"high "
-"availability\" feature enabled. For more information, see HA-Enabled Virtual"
-" Machines as well as HA for Hosts."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new cluster, &PRODUCT; adds the first primary storage server for you. "
-"You can always add more servers later. For an overview of what primary "
-"storage is, see About Primary Storage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To configure the first primary storage server, enter the following, then "
-"click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Name.</emphasis> The name of the storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol.</emphasis> For XenServer, choose either "
-"NFS, iSCSI, or PreSetup. For KVM, choose NFS, SharedMountPoint,CLVM, or RBD."
-" For vSphere choose either VMFS (iSCSI or FiberChannel) or NFS. The "
-"remaining fields in the screen vary depending on what you choose here."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/change-to-behavior-of-list-commands.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/change-to-behavior-of-list-commands.po b/docs/ko_KR/change-to-behavior-of-list-commands.po
deleted file mode 100644
index e9f7c1c..0000000
--- a/docs/ko_KR/change-to-behavior-of-list-commands.po
+++ /dev/null
@@ -1,195 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:48+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Change to Behavior of List Commands"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There was a major change in how our List* API commands work in CloudStack "
-"3.0 compared to 2.2.x. The rules below apply only for managed resources – "
-"those that belong to an account, domain, or project. They are irrelevant for"
-" the List* commands displaying unmanaged (system) resources, such as hosts, "
-"clusters, and external network resources."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When no parameters are passed in to the call, the caller sees only resources"
-" owned by the caller (even when the caller is the administrator). "
-"Previously, the administrator saw everyone else's resources by default."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "When accountName and domainId are passed in:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The caller sees the resources dedicated to the account specified."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the call is executed by a regular user, the user is authorized to specify"
-" only the user's own account and domainId."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the caller is a domain administrator, CloudStack performs an "
-"authorization check to see whether the caller is permitted to view resources"
-" for the given account and domainId."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When projectId is passed in, only resources belonging to that project are "
-"listed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When domainId is passed in, the call returns only resources belonging to the"
-" domain specified. To see the resources of subdomains, use the parameter "
-"isRecursive=true. Again, the regular user can see only resources owned by "
-"that user, the root administrator can list anything, and a domain "
-"administrator is authorized to see only resources of the administrator's own"
-" domain and subdomains."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To see all resources the caller is authorized to see, except for Project "
-"resources, use the parameter listAll=true."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To see all Project resources the caller is authorized to see, use the "
-"parameter projectId=-1."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There is one API command that doesn't fall under the rules above completely:"
-" the listTemplates command. This command has its own flags defining the list"
-" rules:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listTemplates Flag"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "featured"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Returns templates that have been marked as featured and public."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "self"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Returns templates that have been registered or created by the calling user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "selfexecutable"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Same as self, but only returns templates that are ready to be deployed with."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "sharedexecutable"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Ready templates that have been granted to the calling user by another user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "executable"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Templates that are owned by the calling user, or public templates, that can "
-"be used to deploy a new VM."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "community"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Returns templates that have been marked as public but not featured."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "all"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Returns all templates (only usable by admins)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The &PRODUCT; UI on a general view will display all resources that the "
-"logged-in user is authorized to see, except for project resources. To see "
-"the project resources, select the project view."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/changed-apicommands-4-0.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/changed-apicommands-4-0.po b/docs/ko_KR/changed-apicommands-4-0.po
deleted file mode 100644
index bb9e63c..0000000
--- a/docs/ko_KR/changed-apicommands-4-0.po
+++ /dev/null
@@ -1,583 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-02-02 18:37+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Changed API Commands in 4.0.0-incubating"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "API Commands"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Description"
-msgstr "설명"
-
-#. Tag: para
-#, no-c-format
-msgid "copyTemplate"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "prepareTemplate"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "registerTemplate"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateTemplate"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createProject"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "activateProject"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "suspendProject"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateProject"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listProjectAccounts"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createVolume"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "migrateVolume"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "attachVolume"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "detachVolume"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "uploadVolume"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createSecurityGroup"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "registerIso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "copyIso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateIso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createIpForwardingRule"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listIpForwardingRules"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createLoadBalancerRule"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateLoadBalancerRule"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createSnapshot"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The commands in this list have a single new response parameter, and no other"
-" changes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameter: tags(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Many other commands also have the new tags(*) parameter in addition to other"
-" changes; those commands are listed separately."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "rebootVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "attachIso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "detachIso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listLoadBalancerRuleInstances"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "resetPasswordForVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "changeServiceForVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "recoverVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "startVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "migrateVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "deployVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "assignVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "restoreVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "stopVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "destroyVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The commands in this list have two new response parameters, and no other "
-"changes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: keypair, tags(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listSecurityGroups"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listFirewallRules"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listPortForwardingRules"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listSnapshots"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listIsos"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listProjects"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listTemplates"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listLoadBalancerRules"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The commands in this list have the following new parameters, and no other "
-"changes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameter: tags (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listF5LoadBalancerNetworks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listNetscalerLoadBalancerNetworks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listSrxFirewallNetworks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateNetwork"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The commands in this list have three new response parameters, and no other "
-"changes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: canusefordeploy, vpcid, tags(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createZone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateZone"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameter: localstorageenabled (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameter: localstorageenabled"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listZones"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "rebootRouter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "changeServiceForRouter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "startRouter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "destroyRouter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "stopRouter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: vpcid, nic(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateAccount"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "disableAccount"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listAccounts"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "markDefaultZoneForAccount"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "enableAccount"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: vpcavailable, vpclimit, vpctotal"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listRouters"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameters: forvpc (optional), vpcid (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listNetworkOfferings"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameters: forvpc (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: forvpc"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listVolumes"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameters: details (optional), tags (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: tags(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "addTrafficMonitor"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"New request parameters: excludezones (optional), includezones (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createNetwork"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameters: vpcid (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listPublicIpAddresses"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameters: tags (optional), vpcid (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameters: vpcid, tags(*)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listNetworks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"New request parameters: canusefordeploy (optional), forvpc (optional), tags "
-"(optional), vpcid (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "restartNetwork"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "enableStaticNat"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameter: networkid (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createDiskOffering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New request parameter: storagetype (optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "New response parameter: storagetype"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listDiskOfferings"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateDiskOffering"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "createFirewallRule"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Changed request parameters: ipaddressid (old version - optional, new version"
-" - required)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "listVirtualMachines"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"New request parameters: isoid (optional), tags (optional), templateid "
-"(optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "updateStorageNetworkIpRange"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"New response parameters: id, endip, gateway, netmask, networkid, podid, "
-"startip, vlan, zoneid"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/citrix-xenserver-installation.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/citrix-xenserver-installation.po b/docs/ko_KR/citrix-xenserver-installation.po
deleted file mode 100644
index 122ee02..0000000
--- a/docs/ko_KR/citrix-xenserver-installation.po
+++ /dev/null
@@ -1,1504 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 02:49+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Citrix XenServer Installation for &PRODUCT;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you want to use the Citrix XenServer hypervisor to run guest virtual "
-"machines, install XenServer 6.0 or XenServer 6.0.2 on the host(s) in your "
-"cloud. For an initial installation, follow the steps below. If you have "
-"previously installed XenServer and want to upgrade to another version, see "
-"<xref linkend=\"xenserver-version-upgrading\" />."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "System Requirements for XenServer Hosts"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The host must be certified as compatible with one of the following. See the "
-"Citrix Hardware Compatibility Guide: <ulink "
-"url=\"http://hcl.xensource.com\">http://hcl.xensource.com</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 SP2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You must re-install Citrix XenServer if you are going to re-use a host from "
-"a previous install."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Must support HVM (Intel-VT or AMD-V enabled)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure all the hotfixes provided by the hypervisor vendor are applied. "
-"Track the release of hypervisor patches through your hypervisor vendor’s "
-"support channel, and apply patches as soon as possible after they are "
-"released. &PRODUCT; will not track or notify you of required hypervisor "
-"patches. It is essential that your hosts are completely up to date with the "
-"provided hypervisor patches. The hypervisor vendor is likely to refuse to "
-"support any system that is not up to date with patches."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All hosts within a cluster must be homogenous. The CPUs must be of the same "
-"type, count, and feature flags."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Must support HVM (Intel-VT or AMD-V enabled in BIOS)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "64-bit x86 CPU (more cores results in better performance)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Hardware virtualization support required"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "4 GB of memory"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "36 GB of local disk"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "At least 1 NIC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Statically allocated IP Address"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you deploy &PRODUCT;, the hypervisor host must not have any VMs already"
-" running"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The lack of up-do-date hotfixes can lead to data corruption and lost VMs."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "XenServer Installation Steps"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"From <ulink "
-"url=\"https://www.citrix.com/English/ss/downloads/\">https://www.citrix.com/English/ss/downloads/</ulink>,"
-" download the appropriate version of XenServer for your &PRODUCT; version "
-"(see <xref linkend=\"system-requirements-xenserver-hosts\" />). Install it "
-"using the Citrix XenServer Installation Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After installation, perform the following configuration steps, which are "
-"described in the next few sections:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Required"
-msgstr "필수 사항"
-
-#. Tag: para
-#, no-c-format
-msgid "Optional"
-msgstr "옵션"
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"config-xenserver-dom0-memory\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-support-pkg-installation\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-username-password\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Set up SR if not using NFS, iSCSI, or local disk; see <xref linkend"
-"=\"xenserver-primary-storage-setup\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-time-sync\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-iscsi-multipath-setup\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-get-deploy-license\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<xref linkend=\"xenserver-physical-network-setup\" />"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configure XenServer dom0 Memory"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Configure the XenServer dom0 settings to allocate more memory to dom0. This "
-"can enable XenServer to handle larger numbers of virtual machines. We "
-"recommend 2940 MB of RAM for XenServer dom0. For instructions on how to do "
-"this, see <ulink "
-"url=\"http://support.citrix.com/article/CTX126531\">http://support.citrix.com/article/CTX126531</ulink>."
-" The article refers to XenServer 5.6, but the same information applies to "
-"XenServer 6.0."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Username and Password"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All XenServers in a cluster must have the same username and password as "
-"configured in &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Time Synchronization"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The host must be set to use NTP. All hosts in a pod must have the same time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Install NTP."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# yum install ntp"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Edit the NTP configuration file to point to your NTP server."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# vi /etc/ntp.conf"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Add one or more server lines in this file with the names of the NTP servers "
-"you want to use. For example:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"server 0.xenserver.pool.ntp.org\n"
-"server 1.xenserver.pool.ntp.org\n"
-"server 2.xenserver.pool.ntp.org\n"
-"server 3.xenserver.pool.ntp.org\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Restart the NTP client."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# service ntpd restart"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Make sure NTP will start again upon reboot."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# chkconfig ntpd on"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Licensing"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Citrix XenServer Free version provides 30 days usage without a license. "
-"Following the 30 day trial, XenServer requires a free activation and "
-"license. You can choose to install a license now or skip this step. If you "
-"skip this step, you will need to install a license when you activate and "
-"license the XenServer."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Getting and Deploying a License"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you choose to install a license now you will need to use the XenCenter to"
-" activate and get a license."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In XenCenter, click Tools &gt; License manager."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select your XenServer and select Activate Free XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Request a license."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can install the license with XenCenter or using the xe command line "
-"tool."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Install &PRODUCT; XenServer Support Package (CSP)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "(Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To enable security groups, elastic load balancing, and elastic IP on "
-"XenServer, download and install the &PRODUCT; XenServer Support Package "
-"(CSP). After installing XenServer, perform the following additional steps on"
-" each XenServer host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Download the CSP software onto the XenServer host from one of the following "
-"links:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 6.0.2:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/3.0.1/XS-6.0.2/xenserver-"
-"cloud-supp.tgz\">http://download.cloud.com/releases/3.0.1/XS-6.0.2"
-"/xenserver-cloud-supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 5.6 SP2:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/2.2.0/xenserver-cloud-"
-"supp.tgz\">http://download.cloud.com/releases/2.2.0/xenserver-cloud-"
-"supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "For XenServer 6.0:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"http://download.cloud.com/releases/3.0/xenserver-cloud-"
-"supp.tgz\">http://download.cloud.com/releases/3.0/xenserver-cloud-"
-"supp.tgz</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Extract the file:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# tar xf xenserver-cloud-supp.tgz"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the following script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# xe-install-supplemental-pack xenserver-cloud-supp.iso"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the XenServer host is part of a zone that uses basic networking, disable "
-"Open vSwitch (OVS):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# xe-switch-network-backend  bridge"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Restart the host machine when prompted."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The XenServer host is now ready to be added to &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Primary Storage Setup for XenServer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; natively supports NFS, iSCSI and local storage. If you are using "
-"one of these storage types, there is no need to create the XenServer Storage"
-" Repository (\"SR\")."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If, however, you would like to use storage connected via some other "
-"technology, such as FiberChannel, you must set up the SR yourself. To do so,"
-" perform the following steps. If you have your hosts in a XenServer pool, "
-"perform the steps on the master node. If you are working with a single "
-"XenServer which is not part of a cluster, perform the steps on that "
-"XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Connect FiberChannel cable to all hosts in the cluster and to the "
-"FiberChannel storage host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Rescan the SCSI bus. Either use the following command or use XenCenter to "
-"perform an HBA rescan."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# scsi-rescan"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Repeat step <xref linkend=\"rescan-scsi\" /> on every host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Check to be sure you see the new SCSI disk."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# ls /dev/disk/by-id/scsi-360a98000503365344e6f6177615a516b -l"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The output should look like this, although the specific file name will be "
-"different (scsi-&lt;scsiID&gt;):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"lrwxrwxrwx 1 root root 9 Mar 16 13:47\n"
-"/dev/disk/by-id/scsi-360a98000503365344e6f6177615a516b -&gt; ../../sdc\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Repeat step <xref linkend=\"verify-scsi\" /> on every host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"On the storage server, run this command to get a unique ID for the new SR."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# uuidgen"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The output should look like this, although the specific ID will be "
-"different:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "e6849e96-86c3-4f2c-8fcc-350cc711be3d"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create the FiberChannel SR. In name-label, use the unique ID you just "
-"generated."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"# xe sr-create type=lvmohba shared=true\n"
-"device-config:SCSIid=360a98000503365344e6f6177615a516b\n"
-"name-label=\"e6849e96-86c3-4f2c-8fcc-350cc711be3d\"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This command returns a unique ID for the SR, like the following example "
-"(your ID will be different):"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "7a143820-e893-6c6a-236e-472da6ee66bf"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To create a human-readable description for the SR, use the following "
-"command. In uuid, use the SR ID returned by the previous command. In name-"
-"description, set whatever friendly text you prefer."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe sr-param-set uuid=7a143820-e893-6c6a-236e-472da6ee66bf name-"
-"description=\"Fiber Channel storage repository\""
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Make note of the values you will need when you add this storage to &PRODUCT;"
-" later (see <xref linkend=\"primary-storage-add\" />). In the Add Primary "
-"Storage dialog, in Protocol, you will choose PreSetup. In SR Name-Label, you"
-" will enter the name-label you set earlier (in this example, e6849e96-86c3"
-"-4f2c-8fcc-350cc711be3d)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"(Optional) If you want to enable multipath I/O on a FiberChannel SAN, refer "
-"to the documentation provided by the SAN vendor."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "iSCSI Multipath Setup for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When setting up the storage repository on a Citrix XenServer, you can enable"
-" multipath I/O, which uses redundant physical components to provide greater "
-"reliability in the connection between the server and the SAN. To enable "
-"multipathing, use a SAN solution that is supported for Citrix servers and "
-"follow the procedures in Citrix documentation. The following links provide a"
-" starting point:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink "
-"url=\"http://support.citrix.com/article/CTX118791\">http://support.citrix.com/article/CTX118791</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink "
-"url=\"http://support.citrix.com/article/CTX125403\">http://support.citrix.com/article/CTX125403</ulink>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can also ask your SAN vendor for advice about setting up your Citrix "
-"repository for multipathing."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Make note of the values you will need when you add this storage to the "
-"&PRODUCT; later (see <xref linkend=\"primary-storage-add\" />). In the Add "
-"Primary Storage dialog, in Protocol, you will choose PreSetup. In SR Name-"
-"Label, you will enter the same name used to create the SR."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you encounter difficulty, address the support team for the SAN provided "
-"by your vendor. If they are not able to solve your issue, see Contacting "
-"Support."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Physical Networking Setup for XenServer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Once XenServer has been installed, you may need to do some additional "
-"network configuration. At this point in the installation, you should have a "
-"plan for what NICs the host will have and what traffic each NIC will carry. "
-"The NICs should be cabled as necessary to implement your plan."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you plan on using NIC bonding, the NICs on all hosts in the cluster must "
-"be cabled exactly the same. For example, if eth0 is in the private bond on "
-"one host in a cluster, then eth0 must be in the private bond on all hosts in"
-" the cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The IP address assigned for the management network interface must be static."
-" It can be set on the host itself or obtained via static DHCP."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; configures network traffic of various types to use different NICs "
-"or bonds on the XenServer host. You can control this process and provide "
-"input to the Management Server through the use of XenServer network name "
-"labels. The name labels are placed on physical interfaces or bonds and "
-"configured in &PRODUCT;. In some simple cases the name labels are not "
-"required."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid ""
-"Configuring Public Network with a Dedicated NIC for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; supports the use of a second NIC (or bonded pair of NICs, "
-"described in <xref linkend=\"xenserver-nic-bonding\" />) for the public "
-"network. If bonding is not used, the public network can be on any NIC and "
-"can be on different NICs on the hosts in a cluster. For example, the public "
-"network can be on eth0 on node A and eth1 on node B. However, the XenServer "
-"name-label for the public network must be identical across all hosts. The "
-"following examples set the network label to \"cloud-public\". After the "
-"management server is installed and running you must configure it with the "
-"name of the chosen network label (e.g. \"cloud-public\"); this is discussed "
-"in <xref linkend=\"management-server-install-flow\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are using two NICs bonded together to create a public network, see "
-"<xref linkend=\"xenserver-nic-bonding\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you are using a single dedicated NIC to provide public network access, "
-"follow this procedure on each new host that is added to &PRODUCT; before "
-"adding the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run xe network-list and find the public network. This is usually attached to"
-" the NIC that is public. Once you find the network make note of its UUID. "
-"Call this &lt;UUID-Public&gt;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the following command."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-param-set name-label=cloud-public uuid=&lt;UUID-Public&gt;"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring Multiple Guest Networks for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; supports the use of multiple guest networks with the XenServer "
-"hypervisor. Each network is assigned a name-label in XenServer. For example,"
-" you might have two networks with the labels \"cloud-guest\" and \"cloud-"
-"guest2\". After the management server is installed and running, you must add"
-" the networks and use these labels so that &PRODUCT; is aware of the "
-"networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Follow this procedure on each new host before adding the host to &PRODUCT;:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run xe network-list and find one of the guest networks. Once you find the "
-"network make note of its UUID. Call this &lt;UUID-Guest&gt;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run the following command, substituting your own name-label and uuid values."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-param-set name-label=&lt;cloud-guestN&gt; uuid=&lt;UUID-"
-"Guest&gt;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Repeat these steps for each additional guest network, using a different "
-"name-label and uuid each time."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Separate Storage Network for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can optionally set up a separate storage network. This should be done "
-"first on the host, before implementing the bonding steps below. This can be "
-"done using one or two available NICs. With two NICs bonding may be done as "
-"above. It is the administrator's responsibility to set up a separate storage"
-" network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Give the storage network a different name-label than what will be given for "
-"other networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For the separate storage network to work correctly, it must be the only "
-"interface that can ping the primary storage device's IP address. For "
-"example, if eth0 is the management network NIC, ping -I eth0 &lt;primary "
-"storage device IP&gt; must fail. In all deployments, secondary storage "
-"devices must be pingable from the management network NIC or bond. If a "
-"secondary storage device has been placed on the storage network, it must "
-"also be pingable via the storage network NIC or bond on the hosts as well."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can set up two separate storage networks as well. For example, if you "
-"intend to implement iSCSI multipath, dedicate two non-bonded NICs to "
-"multipath. Each of the two networks needs a unique name-label."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If no bonding is done, the administrator must set up and name-label the "
-"separate storage network on all hosts (masters and slaves)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Here is an example to set up eth5 to access a storage network on "
-"172.16.0.0/24."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"# xe pif-list host-name-label='hostname' device=eth5\n"
-"uuid(RO): ab0d3dd4-5744-8fae-9693-a022c7a3471d\n"
-"device ( RO): eth5\n"
-"#xe pif-reconfigure-ip DNS=172.16.3.3 gateway=172.16.0.1 IP=172.16.0.55 mode=static netmask=255.255.255.0 uuid=ab0d3dd4-5744-8fae-9693-a022c7a3471d"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "NIC Bonding for XenServer (Optional)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"XenServer supports Source Level Balancing (SLB) NIC bonding. Two NICs can be"
-" bonded together to carry public, private, and guest traffic, or some "
-"combination of these. Separate storage networks are also possible. Here are "
-"some example supported configurations:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 2 NICs on public, 2 NICs on storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 1 NIC on public, storage uses management network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "2 NICs on private, 2 NICs on public, storage uses management network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "1 NIC for private, public, and storage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "All NIC bonding is optional."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"XenServer expects all nodes in a cluster will have the same network cabling "
-"and same bonds implemented. In an installation the master will be the first "
-"host that was added to the cluster and the slave hosts will be all "
-"subsequent hosts added to the cluster. The bonds present on the master set "
-"the expectation for hosts added to the cluster later. The procedure to set "
-"up bonds on the master and slaves are different, and are described below. "
-"There are several important implications of this:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You must set bonds on the first host added to a cluster. Then you must use "
-"xe commands as below to establish the same bonds in the second and "
-"subsequent hosts added to a cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Slave hosts in a cluster must be cabled exactly the same as the master. For "
-"example, if eth0 is in the private bond on the master, it must be in the "
-"management network for added slave hosts."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Management Network Bonding"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The administrator must bond the management network NICs prior to adding the "
-"host to &PRODUCT;."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a Private Bond on the First Host in the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Use the following steps to create a bond in XenServer. These steps should be"
-" run on only the first host in a cluster. This example creates the cloud-"
-"private network with two physical NICs (eth0 and eth1) bonded into it."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Find the physical NICs that you want to bond together."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe pif-list host-name-label='hostname' device=eth0\n"
-"# xe pif-list host-name-label='hostname' device=eth1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These command shows the eth0 and eth1 NICs and their UUIDs. Substitute the "
-"ethX devices of your choice. Call the UUID's returned by the above command "
-"slave1-UUID and slave2-UUID."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create a new network for the bond. For example, a new network with name "
-"\"cloud-private\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">This label is important. &PRODUCT; looks for a "
-"network by a name you configure. You must use the same name-label for all "
-"hosts in the cloud for the management network.</emphasis>"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-create name-label=cloud-private\n"
-"# xe bond-create network-uuid=[uuid of cloud-private created above]\n"
-"pif-uuids=[slave1-uuid],[slave2-uuid]"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Now you have a bonded pair that can be recognized by &PRODUCT; as the "
-"management network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Public Network Bonding"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Bonding can be implemented on a separate, public network. The administrator "
-"is responsible for creating a bond for the public network if that network "
-"will be bonded and will be separate from the management network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Creating a Public Bond on the First Host in the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These steps should be run on only the first host in a cluster. This example "
-"creates the cloud-public network with two physical NICs (eth2 and eth3) "
-"bonded into it."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"#xe pif-list host-name-label='hostname' device=eth2\n"
-"# xe pif-list host-name-label='hostname' device=eth3"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These command shows the eth2 and eth3 NICs and their UUIDs. Substitute the "
-"ethX devices of your choice. Call the UUID's returned by the above command "
-"slave1-UUID and slave2-UUID."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Create a new network for the bond. For example, a new network with name "
-"\"cloud-public\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">This label is important. &PRODUCT; looks for a "
-"network by a name you configure. You must use the same name-label for all "
-"hosts in the cloud for the public network.</emphasis>"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe network-create name-label=cloud-public\n"
-"# xe bond-create network-uuid=[uuid of cloud-public created above]\n"
-"pif-uuids=[slave1-uuid],[slave2-uuid]"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Now you have a bonded pair that can be recognized by &PRODUCT; as the public"
-" network."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Adding More Hosts to the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With the bonds (if any) established on the master, you should add "
-"additional, slave hosts. Run the following command for all additional hosts "
-"to be added to the cluster. This will cause the host to join the master in a"
-" single XenServer pool."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# xe pool-join master-address=[master IP] master-username=root\n"
-"master-password=[your password]"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Complete the Bonding Setup Across the Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"With all hosts added to the pool, run the cloud-setup-bond script. This "
-"script will complete the configuration and set up of the bonds across all "
-"hosts in the cluster."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Copy the script from the Management Server in "
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/cloud-setup-"
-"bonding.sh to the master host and ensure it is executable."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Run the script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# ./cloud-setup-bonding.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Now the bonds are set up and configured properly across the cluster."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Upgrading XenServer Versions"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"This section tells how to upgrade XenServer software on &PRODUCT; hosts. The"
-" actual upgrade is described in XenServer documentation, but there are some "
-"additional steps you must perform before and after the upgrade."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Be sure the hardware is certified compatible with the new version of "
-"XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To upgrade XenServer:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Upgrade the database. On the Management Server node:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Back up the database:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# mysqldump --user=root --databases cloud &gt; cloud.backup.sql\n"
-"# mysqldump --user=root --databases cloud_usage &gt; cloud_usage.backup.sql"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You might need to change the OS type settings for VMs running on the "
-"upgraded hosts."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 GA to XenServer 5.6 SP2, change any VMs "
-"that have the OS type CentOS 5.5 (32-bit), Oracle Enterprise Linux 5.5 "
-"(32-bit), or Red Hat Enterprise Linux 5.5 (32-bit) to Other Linux (32-bit). "
-"Change any VMs that have the 64-bit versions of these same OS types to Other"
-" Linux (64-bit)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 SP2 to XenServer 6.0.2, change any VMs "
-"that have the OS type CentOS 5.6 (32-bit), CentOS 5.7 (32-bit), Oracle "
-"Enterprise Linux 5.6 (32-bit), Oracle Enterprise Linux 5.7 (32-bit), Red Hat"
-" Enterprise Linux 5.6 (32-bit) , or Red Hat Enterprise Linux 5.7 (32-bit) to"
-" Other Linux (32-bit). Change any VMs that have the 64-bit versions of these"
-" same OS types to Other Linux (64-bit)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you upgraded from XenServer 5.6 to XenServer 6.0.2, do all of the above."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Restart the Management Server and Usage Server. You only need to do this "
-"once for all clusters."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# service cloud-management start\n"
-"# service cloud-usage start"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Disconnect the XenServer cluster from &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as root."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Navigate to the XenServer cluster, and click Actions – Unmanage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Watch the cluster status until it shows Unmanaged."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Log in to one of the hosts in the cluster, and run this command to clean up "
-"the VLAN:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# . /opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Still logged in to the host, run the upgrade preparation script:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/cloud-prepare-upgrade.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: If you see the error \"can't eject CD,\" log in to the VM "
-"and umount the CD, then run the script again."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Upgrade the XenServer software on all hosts in the cluster. Upgrade the "
-"master first."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Live migrate all VMs on this host to other hosts. See the instructions for "
-"live migration in the Administrator's Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: You might see the following error when you migrate a VM:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"[root@xenserver-qa-2-49-4 ~]# xe vm-migrate live=true host=xenserver-qa-2-49-5 vm=i-2-8-VM\n"
-"You attempted an operation on a VM which requires PV drivers to be installed but the drivers were not detected.\n"
-"vm: b6cf79c8-02ee-050b-922f-49583d9f1a14 (i-2-8-VM)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To solve this issue, run the following:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# /opt/xensource/bin/make_migratable.sh  b6cf79c8-02ee-050b-922f-"
-"49583d9f1a14"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Reboot the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Upgrade to the newer version of XenServer. Use the steps in XenServer "
-"documentation."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After the upgrade is complete, copy the following files from the management "
-"server to this host, in the directory locations shown below:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Copy this Management Server file..."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "...to this location on the XenServer host"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/xenserver60/NFSSR.py"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/sm/NFSSR.py"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/make_migratable.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/make_migratable.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"/usr/lib64/cloud/common/scripts/vm/hypervisor/xenserver/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "/opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/setupxenserver.sh"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Troubleshooting: If you see the following error message, you can safely "
-"ignore it."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "mv: cannot stat `/etc/cron.daily/logrotate': No such file or directory"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Plug in the storage repositories (physical block devices) to the XenServer "
-"host:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# for pbd in `xe pbd-list currently-attached=false| grep ^uuid | awk '{print"
-" $NF}'`; do xe pbd-plug uuid=$pbd ; done"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Note: If you add a host to this XenServer pool, you need to migrate all VMs "
-"on this host to other hosts, and eject this host from XenServer pool."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Repeat these steps to upgrade every host in the cluster to the same version "
-"of XenServer."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Run the following command on one host in the XenServer cluster to clean up "
-"the host tags:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"# for host in $(xe host-list | grep ^uuid | awk '{print $NF}') ; do xe host-"
-"param-clear uuid=$host param-name=tags; done;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When copying and pasting a command, be sure the command has pasted as a "
-"single line before executing. Some document viewers may introduce unwanted "
-"line breaks in copied text."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Reconnect the XenServer cluster to &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Navigate to the XenServer cluster, and click Actions – Manage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Watch the status to see that all the hosts come up."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "After all hosts are up, run the following on one host in the cluster:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "# /opt/xensource/bin/cloud-clean-vlan.sh"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/cloudmonkey.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/cloudmonkey.po b/docs/ko_KR/cloudmonkey.po
deleted file mode 100644
index b366175..0000000
--- a/docs/ko_KR/cloudmonkey.po
+++ /dev/null
@@ -1,527 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2013-03-19 14:14+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is the &PRODUCT; Command Line Interface (CLI). It is written in "
-"Python. CloudMonkey can be used both as an interactive shell and as a "
-"command line tool which simplifies &PRODUCT; configuration and management. "
-"It can be used with &PRODUCT; CloudStack 4.0-incubating and above"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is still under development and should be considered a Work In "
-"Progress (WIP), the wiki is the most up to date documentation:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<ulink url=\"https://cwiki.apache.org/CLOUDSTACK/cloudstack-cloudmonkey-"
-"cli.html\">https://cwiki.apache.org/CLOUDSTACK/cloudstack-cloudmonkey-"
-"cli.html</ulink>"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Installing CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudMonkey is dependent on <emphasis>readline, pygments, "
-"prettytable</emphasis>, when installing from source you will need to resolve"
-" those dependencies. Using the cheese shop, the dependencies will be "
-"automatically installed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"There are three ways to get CloudMonkey. Via the official &PRODUCT; source "
-"releases or via a community maintained distribution at <ulink "
-"url=\"http://pypi.python.org/pypi/cloudmonkey/\">the cheese shop</ulink>. "
-"Developers can also get it directly from the git repository in "
-"<emphasis>tools/cli/</emphasis>."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Via the official Apache &PRODUCT; releases as well as the git repository."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"    \n"
-"$ git clone https://git-wip-us.apache.org/repos/asf/incubator-cloudstack.git # (optional if using a release download)\n"
-"$ mvn clean install -P developer\n"
-"$ cd tools/cli # cloudmonkey-x.x.x.tar.gz will be built in dist\n"
-"$ python setup.py build\n"
-"$ python setup.py install\n"
-"    \n"
-"                    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Via a community maintained package on Cheese Shop"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "pip install cloudmonkey"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuration"
-msgstr "구성"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To configure CloudMonkey you can edit the ~/.cloudmonkey/config file in the "
-"user's home directory as shown below. The values can also be set "
-"interactively at the cloudmonkey prompt. Logs are kept in "
-"~/.cloudmonkey/log, and history is stored in ~/.cloudmonkey/history. "
-"Discovered apis are listed in ~/.cloudmonkey/cache. Only the log and history"
-" files can be custom paths and can be configured by setting appropriate file"
-" paths in ~/.cloudmonkey/config"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"$ cat ~/.cloudmonkey/config \n"
-"[core]\n"
-"log_file = /Users/sebastiengoasguen/.cloudmonkey/log\n"
-"asyncblock = true\n"
-"paramcompletion = false\n"
-"history_file = /Users/sebastiengoasguen/.cloudmonkey/history\n"
-"\n"
-"[ui]\n"
-"color = true\n"
-"prompt = &gt; \n"
-"tabularize = false\n"
-"\n"
-"[user]\n"
-"secretkey =VDaACYb0LV9eNjTetIOElcVQkvJck_J_QljX_FcHRj87ZKiy0z0ty0ZsYBkoXkY9b7eq1EhwJaw7FF3akA3KBQ \n"
-"apikey = plgWJfZK4gyS3mOMTVmjUVg-X-jlWlnfaUJ9GAbBbf9EdMkAYMmAiLqzzq1ElZLYq_u38zCm0bewzGUdP66mg\n"
-"\n"
-"[server]\n"
-"path = /client/api\n"
-"host = localhost\n"
-"protocol = http\n"
-"port = 8080\n"
-"timeout = 3600\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The values can also be set at the CloudMonkey prompt. The API and secret "
-"keys are obtained via the &PRODUCT; UI or via a raw api call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"$ cloudmonkey\n"
-"☁ Apache CloudStack cloudmonkey 4.1.0-snapshot. Type help or ? to list commands.\n"
-"\n"
-"&gt; set prompt myprompt&gt;\n"
-"myprompt&gt; set host localhost\n"
-"myprompt&gt; set port 8080\n"
-"myprompt&gt; set apikey &lt;your api key&gt;\n"
-"myprompt&gt; set secretkey &lt;your secret key&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can use CloudMonkey to interact with a local cloud, and even with a "
-"remote public cloud. You just need to set the host value properly and obtain"
-" the keys from the cloud administrator."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "API Discovery"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In &PRODUCT; 4.0.* releases, the list of api calls available will be pre-"
-"cached, while starting with &PRODUCT; 4.1 releases and above an API "
-"discovery service is enabled. CloudMonkey will discover automatically the "
-"api calls available on the management server. The sync command in "
-"CloudMonkey pulls a list of apis which are accessible to your user role, "
-"along with help docs etc. and stores them in ~/.cloudmonkey/cache. This "
-"allows cloudmonkey to be adaptable to changes in mgmt server, so in case the"
-" sysadmin enables a plugin such as Nicira NVP for that user role, the users "
-"can get those changes. New verbs and grammar (DSL) rules are created on the "
-"fly."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To discover the APIs available do:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-" &gt; sync\n"
-"324 APIs discovered and cached\n"
-"    "
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Tabular Output"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The number of key/value pairs returned by the api calls can be large "
-"resulting in a very long output. To enable easier viewing of the output, a "
-"tabular formatting can be setup. You may enable tabular listing and even "
-"choose set of column fields, this allows you to create your own field using "
-"the filter param which takes in comma separated argument. If argument has a "
-"space, put them under double quotes. The create table will have the same "
-"sequence of field filters provided"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To enable it, use the <emphasis>set</emphasis> function and create filters "
-"like so:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"&gt; set tabularize true\n"
-"&gt; list users filter=id,domain,account\n"
-"count = 1\n"
-"user:\n"
-"+--------------------------------------+--------+---------+\n"
-"|                  id                  | domain | account |\n"
-"+--------------------------------------+--------+---------+\n"
-"| 7ed6d5da-93b2-4545-a502-23d20b48ef2a |  ROOT  |  admin  |\n"
-"+--------------------------------------+--------+---------+\n"
-"    "
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Interactive Shell Usage"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To start learning CloudMonkey, the best is to use the interactive shell. "
-"Simply type CloudMonkey at the prompt and you should get the interactive "
-"shell."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"At the CloudMonkey prompt press the tab key twice, you will see all "
-"potential verbs available. Pick on, enter a space and then press tab twice. "
-"You will see all actions available for that verb"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;\n"
-"EOF        assign     cancel     create     detach     extract    ldap       prepare    reconnect  restart    shell      update     \n"
-"activate   associate  change     delete     disable    generate   list       query      register   restore    start      upload     \n"
-"add        attach     configure  deploy     enable     get        mark       quit       remove     revoke     stop       \n"
-"api        authorize  copy       destroy    exit       help       migrate    reboot     reset      set        suspend    \n"
-"cloudmonkey&gt;create \n"
-"account                diskoffering           loadbalancerrule       portforwardingrule     snapshot               tags                   vpc\n"
-"autoscalepolicy        domain                 network                privategateway         snapshotpolicy         template               vpcoffering\n"
-"autoscalevmgroup       firewallrule           networkacl             project                sshkeypair             user                   vpnconnection\n"
-"autoscalevmprofile     instancegroup          networkoffering        remoteaccessvpn        staticroute            virtualrouterelement   vpncustomergateway\n"
-"condition              ipforwardingrule       physicalnetwork        securitygroup          storagenetworkiprange  vlaniprange            vpngateway\n"
-"counter                lbstickinesspolicy     pod                    serviceoffering        storagepool            volume                 zone\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Picking one action and entering a space plus the tab key, you will obtain "
-"the list of parameters for that specific api call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;create network \n"
-"account=            domainid=           isAsync=            networkdomain=      projectid=          vlan=               \n"
-"acltype=            endip=              name=               networkofferingid=  startip=            vpcid=              \n"
-"displaytext=        gateway=            netmask=            physicalnetworkid=  subdomainaccess=    zoneid=             \n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To get additional help on that specific api call you can use the following:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;create network -h\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"\n"
-"cloudmonkey&gt;create network -help\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"\n"
-"cloudmonkey&gt;create network --help\n"
-"Creates a network\n"
-"Required args: displaytext name networkofferingid zoneid\n"
-"Args: account acltype displaytext domainid endip gateway isAsync name netmask networkdomain networkofferingid physicalnetworkid projectid startip subdomainaccess vlan vpcid zoneid\n"
-"cloudmonkey&gt;    \n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Note the required arguments necessary for the calls."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To find out the required parameters value, using a debugger console on the "
-"&PRODUCT; UI might be very useful. For instance using Firebug on Firefox, "
-"you can navigate the UI and check the parameters values for each call you "
-"are making as you navigate the UI."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Starting a Virtual Machine instance with CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To start a virtual machine instance we will use the <emphasis>deploy "
-"virtualmachine</emphasis> call."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;deploy virtualmachine -h\n"
-"Creates and automatically starts a virtual machine based on a service offering, disk offering, and template.\n"
-"Required args: serviceofferingid templateid zoneid\n"
-"Args: account diskofferingid displayname domainid group hostid hypervisor ipaddress iptonetworklist isAsync keyboard keypair name networkids projectid securitygroupids securitygroupnames serviceofferingid size startvm templateid userdata zoneid\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The required arguments are <emphasis>serviceofferingid, templateid and "
-"zoneid</emphasis>"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In order to specify the template that we want to use, we can list all "
-"available templates with the following call:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;list templates templatefilter=all\n"
-"count = 2\n"
-"template:\n"
-"========\n"
-"domain = ROOT\n"
-"domainid = 8a111e58-e155-4482-93ce-84efff3c7c77\n"
-"zoneid = e1bfdfaf-3d9b-43d4-9aea-2c9f173a1ae7\n"
-"displaytext = SystemVM Template (XenServer)\n"
-"ostypeid = 849d7d0a-9fbe-452a-85aa-70e0a0cbc688\n"
-"passwordenabled = False\n"
-"id = 6d360f79-4de9-468c-82f8-a348135d298e\n"
-"size = 2101252608\n"
-"isready = True\n"
-"templatetype = SYSTEM\n"
-"zonename = devcloud\n"
-"...&lt;snipped&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In this snippet, I used DevCloud and only showed the beginning output of the"
-" first template, the SystemVM template"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Similarly to get the <emphasis>serviceofferingid</emphasis> you would do:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;list serviceofferings | grep id\n"
-"id = ef2537ad-c70f-11e1-821b-0800277e749c\n"
-"id = c66c2557-12a7-4b32-94f4-48837da3fa84\n"
-"id = 3d8b82e5-d8e7-48d5-a554-cf853111bc50\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Note that we can use the linux pipe as well as standard linux commands "
-"within the interactive shell. Finally we would start an instance with the "
-"following call:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"\n"
-"cloudmonkey&gt;deploy virtualmachine templateid=13ccff62-132b-4caf-b456-e8ef20cbff0e zoneid=e1bfdfaf-3d9b-43d4-9aea-2c9f173a1ae7 serviceofferingid=ef2537ad-c70f-11e1-821b-0800277e749c\n"
-"jobprocstatus = 0\n"
-"created = 2013-03-05T13:04:51-0800\n"
-"cmd = com.cloud.api.commands.DeployVMCmd\n"
-"userid = 7ed6d5da-93b2-4545-a502-23d20b48ef2a\n"
-"jobstatus = 1\n"
-"jobid = c441d894-e116-402d-aa36-fdb45adb16b7\n"
-"jobresultcode = 0\n"
-"jobresulttype = object\n"
-"jobresult:\n"
-"=========\n"
-"virtualmachine:\n"
-"==============\n"
-"domain = ROOT\n"
-"domainid = 8a111e58-e155-4482-93ce-84efff3c7c77\n"
-"haenable = False\n"
-"templatename = tiny Linux\n"
-"...&lt;snipped&gt;\n"
-"\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The instance would be stopped with:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"cloudmonkey&gt;stop virtualmachine id=7efe0377-4102-4193-bff8-c706909cc2d2\n"
-"    "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The <emphasis>ids</emphasis> that you will use will differ from this "
-"example. Make sure you use the ones that corresponds to your &PRODUCT; "
-"cloud."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Scripting with CloudMonkey"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All previous examples use CloudMonkey via the interactive shell, however it "
-"can be used as a straightfoward CLI, passing the commands to the "
-"<emphasis>cloudmonkey</emphasis> command like shown below."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "$cloudmonkey list users"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"As such it can be used in shell scripts, it can received commands via stdin "
-"and its output can be parsed like any other unix commands as mentioned "
-"before."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/cluster-add.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/cluster-add.po b/docs/ko_KR/cluster-add.po
deleted file mode 100644
index 73298d9..0000000
--- a/docs/ko_KR/cluster-add.po
+++ /dev/null
@@ -1,27 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 04:57+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Adding a Cluster"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You need to tell &PRODUCT; about the hosts that it will manage. Hosts exist "
-"inside clusters, so before you begin adding hosts to the cloud, you must add"
-" at least one cluster."
-msgstr "Host들이 관리될 것이라는 것을 &PRODUCT; 에 알려줘야 한다. 따라서 host들을 cloud에 추가하기 전에 최소 한개 이상의 cluster에 속하게끔 해주어야 한다. "

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/compatibility-matrix.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/compatibility-matrix.po b/docs/ko_KR/compatibility-matrix.po
deleted file mode 100644
index 3312d38..0000000
--- a/docs/ko_KR/compatibility-matrix.po
+++ /dev/null
@@ -1,104 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:03\n"
-"PO-Revision-Date: 2012-09-24 05:01+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Compatibility Matrix"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Hypervisor"
-msgstr "하이퍼 바이저"
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 2.1.x"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 2.2.x"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.0"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "CloudStack 3.0.3"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Yes"
-msgstr "예"
-
-#. Tag: para
-#, no-c-format
-msgid "No"
-msgstr "아니오"
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 FP1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 5.6 SP2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.0"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.0.2"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "XenServer 6.1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "KVM (RHEL 6.0 or 6.1)"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMware (vSphere and vCenter, both version 4.1)"
-msgstr ""


Mime
View raw message