cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [6/9] CLOUDSTACK-1780: Fix multi-language support in UI
Date Fri, 22 Mar 2013 13:03:05 GMT
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/030d5646/client/WEB-INF/classes/resources/messages_de_DE.properties
----------------------------------------------------------------------
diff --git a/client/WEB-INF/classes/resources/messages_de_DE.properties b/client/WEB-INF/classes/resources/messages_de_DE.properties
index cf20be9..5c7fc63 100644
--- a/client/WEB-INF/classes/resources/messages_de_DE.properties
+++ b/client/WEB-INF/classes/resources/messages_de_DE.properties
@@ -15,882 +15,128 @@
 # specific language governing permissions and limitations
 # under the License.
 
-
-#new labels (begin) **********************************************************************************************
-# label.egress.rules=Egress rules
-# message.acquire.new.ip.vpc=Please confirm that you would like to acquire a new IP for this VPC.
-# label.zoneWizard.trafficType.management=Management\: Traffic between CloudStack\\'s internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs
-# label.zoneWizard.trafficType.public=Public\: Traffic between the internet and virtual machines in the cloud.
-# label.zoneWizard.trafficType.guest=Guest\: Traffic between end-user virtual machines
-# label.zoneWizard.trafficType.storage=Storage\: Traffic between primary and secondary storage servers, such as VM templates and snapshots
-# label.quickview=Quickview
-# label.migrate.to.host=Migrate to host
-# label.migrate.to.storage=Migrate to storage
-label.stop=Stopp
-label.reboot=Neustart
-label.destroy=Zerstören
-# label.restore=Restore
-# label.isolation.uri=Isolation URI
-# label.broadcast.uri=Broadcast URI
-# label.enable.s3=Enable S3-backed Secondary Storage
-# confirm.enable.s3=Please fill in the following information to enable support for S3-backed Secondary Storage
-# message.after.enable.s3=S3-backed Secondary Storage configured. Note\: When you leave this page, you will not be able to re-configure S3 again.
-# label.s3.access_key=Access Key
-label.s3.secret_key=Secret Key
-# label.s3.bucket=Bucket
-# label.s3.endpoint=Endpoint
-# label.s3.use_https=Use HTTPS
-# label.s3.connection_timeout=Connection Timeout
-# label.s3.max_error_retry=Max Error Retry
-# label.s3.socket_timeout=Socket Timeout
-#new labels (end) ************************************************************************************************
-
-
-#modified labels (begin) *****************************************************************************************
-# label.site.to.site.VPN=Site-to-site VPN
-# message.zoneWizard.enable.local.storage=WARNING\: If you enable local storage for this zone, you must do the following, depending on where you would like your system VMs to launch\:<br/><br/>1. If system VMs need to be launched in primary storage, primary storage needs to be added to the zone after creation. You must also start the zone in a disabled state.<br/><br/>2. If system VMs need to be launched in local storage, system.vm.use.local.storage needs to be set to true before you enable the zone.<br/><br/><br/>Would you like to continue?
-#modified labels (end) *******************************************************************************************
-
-# label.configure.network.ACLs=Configure Network ACLs
-# label.network.ACLs=Network ACLs
-# label.add.network.ACL=Add network ACL
-# label.private.Gateway=Private Gateway
-# label.VPC.router.details=VPC router details
-# label.VMs.in.tier=VMs in tier
-# label.local.storage.enabled=Local storage enabled
-# label.tier.details=Tier details
-# label.edit.tags=Edit tags
-# label.action.enable.physical.network=Enable physical network
-# label.action.disable.physical.network=Disable physical network
-# message.action.enable.physical.network=Please confirm that you want to enable this physical network.
-# message.action.disable.physical.network=Please confirm that you want to disable this physical network.
-
-# label.select.tier=Select Tier
-# label.add.ACL=Add ACL
-# label.remove.ACL=Remove ACL
-# label.tier=Tier
-# label.network.ACL=Network ACL
-# label.network.ACL.total=Network ACL Total
-# label.add.new.gateway=Add new gateway
-# message.add.new.gateway.to.vpc=Please specify the information to add a new gateway to this VPC.
-# label.delete.gateway=delete gateway
-# message.delete.gateway=Please confirm you want to delete the gateway
-# label.CIDR.of.destination.network=CIDR of destination network
-# label.add.route=Add route
-# label.add.static.route=Add static route
-# label.remove.static.route=Remove static route
-# label.add.VPN.gateway=Add VPN Gateway
-# message.add.VPN.gateway=Please confirm that you want to add a VPN Gateway
-# label.VPN.gateway=VPN Gateway
-# label.delete.VPN.gateway=delete VPN Gateway
-# message.delete.VPN.gateway=Please confirm that you want to delete this VPN Gateway
-# label.VPN.connection=VPN Connection
-# label.IPsec.preshared.key=IPsec Preshared-Key
-# label.IKE.policy=IKE policy
-# label.ESP.policy=ESP policy
-# label.create.VPN.connection=Create VPN Connection
-# label.VPN.customer.gateway=VPN Customer Gateway
-# label.CIDR.list=CIDR list
-# label.IKE.lifetime=IKE Lifetime (second)
-# label.ESP.lifetime=ESP Lifetime(second)
-# label.dead.peer.detection=Dead Peer Detection
-# label.reset.VPN.connection=Reset VPN connection
-# message.reset.VPN.connection=Please confirm that you want to reset VPN connection
-# label.delete.VPN.connection=delete VPN connection
-# message.delete.VPN.connection=Please confirm that you want to delete VPN connection
-# label.add.new.tier=Add new tier
-# label.add.VM.to.tier=Add VM to tier
-# label.remove.tier=Remove tier
-
-# label.local.storage.enabled=Local storage enabled
-# label.associated.network=Associated Network
-# label.add.port.forwarding.rule=Add port forwarding rule
-# label.dns=DNS
-
-# label.vpc=VPC
-# label.vpc.id=VPC ID
-# label.tier=Tier
-# label.add.vpc=Add VPC
-# label.super.cidr.for.guest.networks=Super CIDR for Guest Networks
-# label.DNS.domain.for.guest.networks=DNS domain for Guest Networks
-# label.configure.vpc=Configure VPC
-# label.edit.vpc=Edit VPC
-# label.restart.vpc=restart VPC
-# message.restart.vpc=Please confirm that you want to restart the VPC
-# label.remove.vpc=remove VPC
-# message.remove.vpc=Please confirm that you want to remove the VPC
-# label.vpn.customer.gateway=VPN Customer Gateway
-# label.add.vpn.customer.gateway=Add VPN Customer Gateway
-# label.IKE.encryption=IKE Encryption
-# label.IKE.hash=IKE Hash
-# label.IKE.DH=IKE DH
-# label.ESP.encryption=ESP Encryption
-# label.ESP.hash=ESP Hash
-# label.perfect.forward.secrecy=Perfect Forward Secrecy
-# label.IKE.lifetime=IKE Lifetime (second)
-# label.ESP.lifetime=ESP Lifetime(second)
-# label.dead.peer.detection=Dead Peer Detection
-# label.delete.VPN.customer.gateway=delete VPN Customer Gateway
-# message.delete.VPN.customer.gateway=Please confirm that you want to delete this VPN Customer Gateway
-
-# label.network.domain.text=Network domain
-label.memory.mb=Speicher (in MB)
-label.cpu.mhz=CPU (in MHz)
-
-# message.action.remove.host=Please confirm that you want to remove this host.
-
-# message.action.reboot.router=All services provided by this virtual router will be interrupted. Please confirm that you want to reboot this router.
-# message.action.stop.router=All services provided by this virtual router will be interrupted. Please confirm that you want to stop this router.
-# message.restart.network=All services provided by this network will be interrupted. Please confirm that you want to restart this network.
-
-
-label.ipaddress=IP-Adresse
-# label.vcdcname=vCenter DC name
-# label.vcipaddress=vCenter IP Address
-# label.vsmctrlvlanid=Control VLAN ID
-# label.vsmpktvlanid=Packet VLAN ID
-# label.vsmstoragevlanid=Storage VLAN ID
-# label.nexusVswitch=Nexus 1000v
-# label.action.delete.nexusVswitch=Delete Nexus 1000v
-# label.action.enable.nexusVswitch=Enable Nexus 1000v
-# label.action.disable.nexusVswitch=Disable Nexus 1000v
-# label.action.list.nexusVswitch=List Nexus 1000v
-# message.action.delete.nexusVswitch=Please confirm that you want to delete this nexus 1000v
-# message.action.enable.nexusVswitch=Please confirm that you want to enable this nexus 1000v
-# message.action.disable.nexusVswitch=Please confirm that you want to disable this nexus 1000v
-# message.specify.url=Please specify URL
-# label.select.instance.to.attach.volume.to=Select instance to attach volume to
-# label.upload=Upload
-# label.upload.volume=Upload volume
-# label.virtual.routers=Virtual Routers
-# label.primary.storage.count=Primary Storage Pools
-# label.secondary.storage.count=Secondary Storage Pools
-# label.number.of.system.vms=Number of System VMs
-# label.number.of.virtual.routers=Number of Virtual Routers
-# label.action.register.iso=Register ISO
-# label.isolation.method=Isolation method
-# label.action.register.template=Register template
-# label.checksum=MD5 checksum
-label.vpn=VPN
-label.vlan=VLAN
-
-
-# label.management.ips=Management IP Addresses
-# label.devices=Devices
-# label.rules=Rules
-# label.traffic.label=Traffic label
-# label.vm.state=VM state
-# message.setup.physical.network.during.zone.creation.basic=When adding a basic zone, you can set up one physical network, which corresponds to a NIC on the hypervisor. The network carries several types of traffic.<br/><br/>You may also <strong>drag and drop</strong> other traffic types onto the physical network.
-# label.domain.router=Domain router
-# label.console.proxy=Console proxy
-# label.secondary.storage.vm=Secondary storage VM
-# label.add.netScaler.device=Add Netscaler device
-# label.add.F5.device=Add F5 device
-# label.add.SRX.device=Add SRX device
-# label.account.and.security.group=Account, Security group
-# label.fetch.latest=Fetch latest
-# label.system.offering=System Offering
-# message.validate.instance.name=Instance name can not be longer than 63 characters. Only ASCII letters a~z, A~Z, digits 0~9, hyphen are allowed. Must start with a letter and end with a letter or a digit.
-
-
-# label.isolated.networks=Isolated networks
-# label.latest.events=Latest events
-# state.Enabled=Enabled
-# label.system.wide.capacity=System-wide capacity
-# label.network.service.providers=Network Service Providers
-# message.launch.zone=Zone is ready to launch; please proceed to the next step.
-# error.unable.to.reach.management.server=Unable to reach Management Server
-# label.internal.name=Internal name
-# message.configure.all.traffic.types=You have multiple physical networks; please configure labels for each traffic type by clicking on the Edit button.
-# message.edit.traffic.type=Please specify the traffic label you want associated with this traffic type.
-# label.edit.traffic.type=Edit traffic type
-# label.label=Label
-# label.max.networks=Max. networks
-# error.invalid.username.password=Invalid username or password
-# message.enabling.security.group.provider=Enabling Security Group provider
-# message.adding.Netscaler.provider=Adding Netscaler provider
-# message.creating.guest.network=Creating guest network
-# label.action.delete.physical.network=Delete physical network
-# message.action.delete.physical.network=Please confirm that you want to delete this physical network
-# message.installWizard.copy.whatIsAHost=A host is a single computer. Hosts provide the computing resources that run the guest virtual machines. Each host has hypervisor software installed on it to manage the guest VMs (except for bare metal hosts, which are a special case discussed in the Advanced Installation Guide). For example, a Linux KVM-enabled server, a Citrix XenServer server, and an ESXi server are hosts. In a Basic Installation, we use a single host running XenServer or KVM.<br/><br/>The host is the smallest organizational unit within a CloudStack&\#8482; deployment. Hosts are contained within clusters, clusters are contained within pods, and pods are contained within zones. 
-
-
-# label.add.compute.offering=Add compute offering
-# label.compute.offering=Compute offering
-# label.compute.offerings=Compute offerings
-# label.select.offering=Select offering
-# label.menu.infrastructure=Infrastructure
-# label.sticky.tablesize=Table size
-# label.sticky.expire=Expires
-# label.sticky.cookie-name=Cookie name
-# label.sticky.mode=Mode
-# label.sticky.length=Length
-# label.sticky.holdtime=Hold time
-# label.sticky.request-learn=Request learn
-# label.sticky.prefix=Prefix
-# label.sticky.nocache=No cache
-# label.sticky.indirect=Indirect
-# label.sticky.postonly=Post only
-label.sticky.domain=Domain
-# state.Allocating=Allocating
-# state.Migrating=Migrating
-# error.please.specify.physical.network.tags=Network offerings is not available until you specify tags for this physical network.
-
-
-# state.Stopping=Stopping
-# message.add.load.balancer.under.ip=The load balancer rule has been added under IP\:
-# message.select.instance=Please select an instance.
-# label.select=Select
-# label.select.vm.for.static.nat=Select VM for static NAT
-# label.select.instance=Select instance
-# label.nat.port.range=NAT Port Range
-# label.static.nat.vm.details=Static NAT VM Details
-# label.edit.lb.rule=Edit LB rule
-message.migrate.instance.to.host=Bitte bestätigen sie, dass die Instanz auf einen anderen Host migriert werden soll
-label.migrate.instance.to.host=Instanz auf einen anderen Host migrieren
-message.migrate.instance.to.ps=Bitte bestätigen sie, dass sie die Instanz auf einen anderen primären Speicher migrieren wollen. 
-label.migrate.instance.to.ps=Instanz auf einen anderen Speicher migrieren
-label.corrections.saved=Korrekturen gespeichert
-# message.installWizard.copy.whatIsSecondaryStorage=Secondary storage is associated with a zone, and it stores the following\:<ul><li>Templates - OS images that can be used to boot VMs and can include additional configuration information, such as installed applications</li><li>ISO images - OS images that can be bootable or non-bootable</li><li>Disk volume snapshots - saved copies of VM data which can be used for data recovery or to create new templates</ul>
-# message.installWizard.copy.whatIsPrimaryStorage=A CloudStack&\#8482; cloud infrastructure makes use of two types of storage\: primary storage and secondary storage. Both of these can be iSCSI or NFS servers, or localdisk.<br/><br/><strong>Primary storage</strong> is associated with a cluster, and it stores the disk volumes of each guest VM for all the VMs running on hosts in that cluster. The primary storage server is typically located close to the hosts. 
-# message.installWizard.copy.whatIsACluster=A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Virtual machine instances (VMs) can be live-migrated from one host to another within the same cluster, without interrupting service to the user. A cluster is the third-largest organizational unit within a CloudStack&\#8482; deployment. Clusters are contained within pods, and pods are contained within zones.<br/><br/>CloudStack&\#8482; allows multiple clusters in a cloud deployment, but for a Basic Installation, we only need one cluster. 
-# message.installWizard.copy.whatIsAPod=A pod often represents a single rack. Hosts in the same pod are in the same subnet.<br/><br/>A pod is the second-largest organizational unit within a CloudStack&\#8482; deployment. Pods are contained within zones. Each zone can contain one or more pods; in the Basic Installation, you will have just one pod in your zone.
-# message.installWizard.copy.whatIsAZone=A zone is the largest organizational unit within a CloudStack&\#8482; deployment. A zone typically corresponds to a single datacenter, although it is permissible to have multiple zones in a datacenter. The benefit of organizing infrastructure into zones is to provide physical isolation and redundancy. For example, each zone can have its own power supply and network uplink, and the zones can be widely separated geographically (though this is not required).
-# message.installWizard.copy.whatIsCloudStack=CloudStack&\#8482 is a software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. CloudStack&\#8482 manages the network, storage, and compute nodes that make up a cloud infrastructure. Use CloudStack&\#8482 to deploy, manage, and configure cloud computing environments.<br/><br/>Extending beyond individual virtual machine images running on commodity hardware, CloudStack&\#8482 provides a turnkey cloud infrastructure software stack for delivering virtual datacenters as a service - delivering all of the essential components to build, deploy, and manage multi-tier and multi-tenant cloud applications. Both open-source and Premium versions are available, with the open-source version offering nearly identical features. 
-message.installWizard.tooltip.addSecondaryStorage.path=Der exportierte Pfad, der auf dem o.a. Server liegt. 
-message.installWizard.tooltip.addSecondaryStorage.nfsServer=Die IP-Adresse des NFS-Servers, der den Secondary Storage bereitstellt. 
-message.installWizard.tooltip.addPrimaryStorage.path=(für NFS) Bei NFS wird hier der exportierte Pfad (Shared Mount Point) angegeben. Für KVM wird hier der Pfad angegeben, wo auf jedem Host das primary storage gemountet wurde. Z.B. "/mnt/primary"
-message.installWizard.tooltip.addPrimaryStorage.server=(für NFS, iSCSI oder PreSetup) Die IP-Adresse oder der DNS-Name des storage devices. 
-message.installWizard.tooltip.addPrimaryStorage.name=Der Name der Storage Devices
-message.installWizard.tooltip.addHost.password=Dies ist das Passwort des o.a. Users (von der XenServer Installation)
-message.installWizard.tooltip.addHost.username=überlicherweise root
-message.installWizard.tooltip.addHost.hostname=Der DNS-Name oder die IP-Adresse des hosts
-message.installWizard.tooltip.addCluster.name=Der Name des Clusters. Der Name kann frei gewählt werden und wird von Cloudstack nicht genutzt. 
-# message.installWizard.tooltip.addPod.reservedSystemEndIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
-# message.installWizard.tooltip.addPod.reservedSystemStartIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
-message.installWizard.tooltip.addPod.reservedSystemNetmask=Die Subnetzmaske des Gast-Netzwerks
-message.installWizard.tooltip.addPod.reservedSystemGateway=Das Gateways für die Hosts des pod
-message.installWizard.tooltip.addPod.name=Der Name für den pod
-# message.installWizard.tooltip.configureGuestTraffic.guestEndIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
-# message.installWizard.tooltip.configureGuestTraffic.guestStartIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
-message.installWizard.tooltip.configureGuestTraffic.guestNetmask=Die Subnetzmaske des Gast-Netzwerks
-message.installWizard.tooltip.configureGuestTraffic.guestGateway=Das gateway, welches der Gast benutzen soll. 
-message.installWizard.tooltip.configureGuestTraffic.description=Eine Beschreibung des Netzwerkes. 
-message.installWizard.tooltip.configureGuestTraffic.name=Der Name für das Netzwerk
-# message.installWizard.tooltip.addZone.internaldns2=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
-# message.installWizard.tooltip.addZone.internaldns1=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
-# message.installWizard.tooltip.addZone.dns2=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
-message.installWizard.tooltip.addZone.name=Der Name für die zone
-# message.installWizard.tooltip.addZone.dns1=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
-message.setup.successful=Cloud setup erfolgreich
-label.may.continue=Sie können jetzt fortfahren
-error.installWizard.message=Ein Fehler ist aufgetreten; Sie können zurückgehen und den Fehler korregieren
-message.installWizard.now.building=Ihre Cloud wird erstellt ...
-message.installWizard.click.retry=Bitte den Start Button für einen neuen Versuch drücken
-label.launch=Start
-label.installWizard.click.launch=Bitte den Start Button drücken
-label.congratulations=Herzlichen Glückwunsch
-label.installWizard.addSecondaryStorageIntro.subtitle=Was ist secondary storage?
-label.installWizard.addSecondaryStorageIntro.title=secondary storage
-label.installWizard.addPrimaryStorageIntro.subtitle=Was ist primay storage?
-label.installWizard.addPrimaryStorageIntro.title=primary storage hinzufügen
-label.installWizard.addHostIntro.subtitle=Was ist ein host?
-label.installWizard.addHostIntro.title=host hinzufügen
-label.installWizard.addClusterIntro.subtitle=Was ist ein Cluster?
-label.installWizard.addClusterIntro.title=cluster hinzufügen
-label.installWizard.addPodIntro.subtitle=Was ist ein pod?
-label.installWizard.addPodIntro.title=pod hinzufügen
-label.installWizard.addZone.title=zone hinzufügen
-# label.installWizard.addZoneIntro.subtitle=What is a zone?
-# label.installWizard.addZoneIntro.title=Let&rsquo;s add a zone
-# error.password.not.match=The password fields do not match
-# label.confirm.password=Confirm password
-# message.change.password=Please change your password.
-# label.save.and.continue=Save and continue
-# label.skip.guide=I have used CloudStack before, skip this guide
-# label.continue.basic.install=Continue with basic installation
-# label.introduction.to.cloudstack=Introduction to CloudStack&\#8482
-# label.what.is.cloudstack=What is CloudStack&\#8482?
-# label.hints=Hints
-# label.installWizard.subtitle=This tour will aid you in setting up your CloudStack&\#8482 installation
-# label.continue=Continue
-# label.installWizard.title=Hello and Welcome to CloudStack&\#8482
-# label.agree=Agree
-# label.manage.resources=Manage Resources
-# label.port.forwarding.policies=Port forwarding policies
-# label.load.balancing.policies=Load balancing policies
-# label.networking.and.security=Networking and security
-# label.bandwidth=Bandwidth
-# label.virtual.machines=Virtual machines
-# label.compute.and.storage=Compute and Storage
-# label.task.completed=Task completed
-# label.update.project.resources=Update project resources
-# label.remove.project.account=Remove project account
-# label.item.listing=Item listing
-# message.select.item=Please select an item.
-# label.removing=Removing
-# label.invite=Invite
-# label.add.by=Add by
-# label.max.vms=Max. user VMs
-# label.max.public.ips=Max. public IPs
-# label.max.volumes=Max. volumes
-# label.max.snapshots=Max. snapshots
-# label.max.templates=Max. templates
-# label.max.vpcs=Max. VPCs
-# label.project.dashboard=Project dashboard
-# label.remind.later=Remind me later
-# label.invited.accounts=Invited accounts
-# label.invite.to=Invite to
-# label.add.accounts.to=Add accounts to
-# label.add.accounts=Add accounts
-# label.project.name=Project name
-# label.create.project=Create project
-# label.networks=Networks
-# label.launch.vm=Launch VM
-# label.new.vm=New VM
-# label.previous=Previous
-# label.add.to.group=Add to group
-# message.vm.review.launch=Please review the following information and confirm that your virtual instance is correct before launch.
-# message.select.security.groups=Please select security group(s) for your new VM
-# label.new=New
-# message.please.select.networks=Please select networks for your virtual machine.
-# message.please.proceed=Please proceed to the next step.
-# message.zone.no.network.selection=The zone you selected does not have any choices for network selection.
-# label.no.thanks=No thanks
-# label.my.templates=My templates
-# message.select.template=Please select a template for your new virtual instance.
-# message.select.iso=Please select an ISO for your new virtual instance.
-# message.template.desc=OS image that can be used to boot VMs
-# message.iso.desc=Disc image containing data or bootable media for OS
-# label.select.iso.or.template=Select ISO or template
-# message.select.a.zone=A zone typically corresponds to a single datacenter. Multiple zones help make the cloud more reliable by providing physical isolation and redundancy.
-# label.select.a.zone=Select a zone
-# label.review=Review
-# label.select.a.template=Select a template
-# label.setup=Setup
-state.Allocated=Zugeteilt
-# changed.item.properties=Changed item properties
-# label.apply=Apply
-# label.default=Default
-# label.viewing=Viewing
-# label.move.to.top=Move to top
-# label.move.up.row=Move up one row
-# label.move.down.row=Move down one row
-# label.move.to.bottom=Move to bottom
-# label.drag.new.position=Drag to new position
-# label.order=Order
-# label.no.data=No data to show
-# label.change.value=Change value
-# label.clear.list=Clear list
-# label.full.path=Full path
-# message.add.domain=Please specify the subdomain you want to create under this domain
-# message.delete.user=Please confirm that you would like to delete this user.
-# message.enable.user=Please confirm that you would like to enable this user.
-# message.disable.user=Please confirm that you would like to disable this user.
-# message.generate.keys=Please confirm that you would like to generate new keys for this user.
-# message.update.resource.count=Please confirm that you want to update resource counts for this account.
-# message.edit.account=Edit ("-1" indicates no limit to the amount of resources create)
-# label.total.of.vm=Total of VM
-# label.total.of.ip=Total of IP Address
-# state.enabled=Enabled
-# message.action.download.iso=Please confirm that you want to download this ISO.
-# message.action.download.template=Please confirm that you want to download this template.
-# label.destination.zone=Destination Zone
-# label.keyboard.type=Keyboard type
-# label.nic.adapter.type=NIC adapter type
-# label.root.disk.controller=Root disk controller
-# label.community=Community
-# label.remove.egress.rule=Remove egress rule
-# label.add.egress.rule=Add egress rule
-# label.egress.rule=Egress rule
-# label.remove.ingress.rule=Remove ingress rule
-# label.delete.vpn.user=Delete VPN user
-# label.add.vpn.user=Add VPN user
-# label.remove.pf=Remove port forwarding rule
-# label.remove.vm.from.lb=Remove VM from load balancer rule
-# label.add.vms.to.lb=Add VM(s) to load balancer rule
-# label.add.vm=Add VM
-# label.remove.static.nat.rule=Remove static NAT rule
-# label.remove.rule=Remove rule
-# label.add.static.nat.rule=Add static NAT rule
-# label.add.rule=Add rule
-label.configuration=Konfiguration
-# message.disable.vpn=Are you sure you want to disable VPN?
-# label.disable.vpn=Disable VPN
-# message.enable.vpn=Please confirm that you want VPN access enabled for this IP address.
-# label.enable.vpn=Enable VPN
-# message.acquire.new.ip=Please confirm that you would like to acquire a new IP for this network.
-# label.elastic=Elastic
-# label.my.network=My network
-# label.add.vms=Add VMs
-# label.configure=Configure
-# label.stickiness=Stickiness
-# label.source=Source
-# label.least.connections=Least connections
-# label.round.robin=Round-robin
-# label.restart.required=Restart required
-# label.clean.up=Clean up
-# label.restart.network=Restart network
-# label.edit.network.details=Edit network details
-# label.add.guest.network=Add guest network
-# label.guest.networks=Guest networks
-# message.ip.address.changed=Your IP addresses may have changed; would you like to refresh the listing? Note that in this case the details pane will close.
-# state.BackingUp=Backing Up
-# state.BackedUp=Backed Up
-# label.done=Done
-# label.vm.name=VM name
-# message.migrate.volume=Please confirm that you want to migrate volume to another primary storage.
-# label.migrate.volume=Migrate volume to another primary storage
-# message.create.template=Are you sure you want to create template?
-# label.create.template=Create template
-# message.download.volume.confirm=Please confirm that you want to download this volume
-# message.detach.disk=Are you sure you want to detach this disk?
-# state.ready=Ready
-# state.Ready=Ready
-# label.vm.display.name=VM display name
-# label.select-view=Select view
-# label.local.storage=Local Storage
-# label.direct.ips=Shared Network IPs
-# label.view.all=View all
-# label.zone.details=Zone details
-# message.alert.state.detected=Alert state detected
-# state.Starting=Starting
-# state.Expunging=Expunging
-# state.Creating=Creating
-# message.decline.invitation=Are you sure you want to decline this project invitation?
-# label.decline.invitation=Decline invitation
-# message.confirm.join.project=Please confirm you wish to join this project.
-# message.join.project=You have now joined a project. Please switch to Project view to see the project.
-# label.accept.project.invitation=Accept project invitation
-# label.token=Token
-# label.project.id=Project ID
-# message.enter.token=Please enter the token that you were given in your invite e-mail.
-# label.enter.token=Enter token
-# state.Accepted=Accepted
-# state.Pending=Pending
-# state.Completed=Completed
-# state.Declined=Declined
-# label.project=Project
-# label.invitations=Invitations
-# label.delete.project=Delete project
-# message.delete.project=Are you sure you want to delete this project?
-# message.activate.project=Are you sure you want to activate this project?
-# label.activate.project=Activate Project
-# label.suspend.project=Suspend Project
-# message.suspend.project=Are you sure you want to suspend this project?
-# state.Suspended=Suspended
-# label.edit.project.details=Edit project details
-# label.new.project=New Project
-# state.Active=Active
-state.Disabled=Deaktiviert
-# label.projects=Projects
-# label.make.project.owner=Make account project owner
-# label.remove.project.account=Remove project account
-# message.project.invite.sent=Invite sent to user; they will be added to the project once they accept the invitation
-# label.add.account.to.project=Add account to project
-# label.revoke.project.invite=Revoke invitation
-# label.project.invite=Invite to project
-# label.select.project=Select Project
-# message.no.projects=You do not have any projects.<br/>Please create a new one from the projects section.
-# message.no.projects.adminOnly=You do not have any projects.<br/>Please ask your administrator to create a new project.
-# message.pending.projects.1=You have pending project invitations\:
-# message.pending.projects.2=To view, please go to the projects section, then select invitations from the drop-down.
-# message.instanceWizard.noTemplates=You do not have any templates available; please add a compatible template, and re-launch the instance wizard.
-# label.view=View
-# instances.actions.reboot.label=Reboot instance
-# label.filterBy=Filter by
-# label.ok=OK
-# notification.reboot.instance=Reboot instance
-# notification.start.instance=Start instance
-# notification.stop.instance=Stop instance
-# label.display.name=Display name
-# label.zone.name=Zone name
-# ui.listView.filters.all=All
-# ui.listView.filters.mine=Mine
-# state.Running=Running
-# state.Stopped=Stopped
-# state.Destroyed=Destroyed
-state.Error=Fehler
-# message.reset.password.warning.notPasswordEnabled=The template of this instance was created without password enabled
-# message.reset.password.warning.notStopped=Your instance must be stopped before attempting to change its current password
-# label.notifications=Notifications
-# label.default.view=Default View
-# label.project.view=Project View
-
-# message.add.system.service.offering=Please fill in the following data to add a new system service offering.
-# message.action.delete.system.service.offering=Please confirm that you want to delete this system service offering.
-# label.action.delete.system.service.offering=Delete System Service Offering
-# label.hypervisor.capabilities=Hypervisor capabilities
-# label.hypervisor.version=Hypervisor version
-# label.max.guest.limit=Max guest limit
-# label.add.network.offering=Add network offering
-# label.supported.services=Supported Services
-# label.service.capabilities=Service Capabilities
-# label.guest.type=Guest Type
-# label.specify.IP.ranges=Specify IP ranges
-# label.conserve.mode=Conserve mode
-# label.created.by.system=Created by system
-# label.menu.system.service.offerings=System Offerings
-label.add.system.service.offering=System-Service-Angebot hinzufügen
-# label.redundant.router.capability=Redundant router capability
-# label.supported.source.NAT.type=Supported Source NAT type
-# label.elastic.LB=Elastic LB
-# label.LB.isolation=LB isolation
-# label.elastic.IP=Elastic IP
-# label.network.label.display.for.blank.value=Use default gateway
-# label.xen.traffic.label=XenServer traffic label
-# label.kvm.traffic.label=KVM traffic label
-# label.vmware.traffic.label=VMware traffic label
-# label.start.IP=Start IP
-# label.end.IP=End IP
-# label.remove.ip.range=Remove IP range
-# label.ip.ranges=IP Ranges
-# label.start.vlan=Start Vlan
-# label.end.vlan=End Vlan
-# label.broadcast.domain.range=Broadcast domain range
-# label.compute=Compute
-# message.add.guest.network=Please confirm that you would like to add a guest network
-# label.subdomain.access=Subdomain Access
-# label.guest.start.ip=Guest start IP
-# label.guest.end.ip=Guest end IP
-# label.virtual.router=Virtual Router
-# label.physical.network.ID=Physical network ID
-# label.destination.physical.network.id=Destination physical network ID
-# label.dhcp=DHCP
-# label.destroy.router=Destroy router
-# message.confirm.destroy.router=Please confirm that you would like to destroy this router
-# label.change.service.offering=Change service offering
-# label.view.console=View console
-# label.redundant.state=Redundant state
-# label.enable.provider=Enable provider
-# message.confirm.enable.provider=Please confirm that you would like to enable this provider
-# label.disable.provider=Disable provider
-# message.confirm.disable.provider=Please confirm that you would like to disable this provider
-# label.shutdown.provider=Shutdown provider
-# message.confirm.shutdown.provider=Please confirm that you would like to shutdown this provider
-# label.netScaler=NetScaler
-# label.add.new.NetScaler=Add new NetScaler
-# label.capacity=Capacity
-# label.dedicated=Dedicated
-# label.f5=F5
-# label.add.new.F5=Add new F5
-# label.srx=SRX
-# label.providers=Providers
-# label.add.new.SRX=Add new SRX
-# label.timeout=Timeout
-# label.public.network=Public network
-# label.private.network=Private network
-# label.enable.swift=Enable Swift
-# confirm.enable.swift=Please fill in the following information to enable support for Swift
-# message.after.enable.swift=Swift configured. Note\: When you leave this page, you will not be able to re-configure Swift again.
-# label.key=Key
-# label.delete.NetScaler=Delete NetScaler
-# message.confirm.delete.NetScaler=Please confirm that you would like to delete NetScaler
-# label.delete.F5=Delete F5
-# message.confirm.delete.F5=Please confirm that you would like to delete F5
-# label.delete.SRX=Delete SRX
-# message.confirm.delete.SRX=Please confirm that you would like to delete SRX
-# label.pods=Pods
-# label.pod.name=Pod name
-# label.reserved.system.gateway=Reserved system gateway
-# label.reserved.system.netmask=Reserved system netmask
-# label.start.reserved.system.IP=Start Reserved system IP
-# label.end.reserved.system.IP=End Reserved system IP
-# label.clusters=Clusters
-# label.cluster.name=Cluster Name
-# label.host.MAC=Host MAC
-# label.agent.username=Agent Username
-# label.agent.password=Agent Password
-# message.confirm.action.force.reconnect=Please confirm that you want to force reconnect this host.
-# label.resource.state=Resource state
-# label.LUN.number=LUN \#
-# message.confirm.remove.IP.range=Please confirm that you would like to remove this IP range.
-# message.tooltip.zone.name=A name for the zone.
-# message.tooltip.dns.1=Name of a DNS server for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
-# message.tooltip.dns.2=A second DNS server name for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
-# message.tooltip.internal.dns.1=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
-# message.tooltip.internal.dns.2=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
-# message.tooltip.network.domain=A DNS suffix that will create a custom domain name for the network that is accessed by guest VMs.
-# message.tooltip.pod.name=A name for this pod.
-# message.tooltip.reserved.system.gateway=The gateway for the hosts in the pod.
-# message.tooltip.reserved.system.netmask=The network prefix that defines the pod subnet. Uses CIDR notation.
-# message.creating.zone=Creating zone
-# message.creating.physical.networks=Creating physical networks
-# message.configuring.physical.networks=Configuring physical networks
-# message.adding.Netscaler.device=Adding Netscaler device
-# message.creating.pod=Creating pod
-# message.configuring.public.traffic=Configuring public traffic
-# message.configuring.storage.traffic=Configuring storage traffic
-# message.configuring.guest.traffic=Configuring guest traffic
-# message.creating.cluster=Creating cluster
-# message.adding.host=Adding host
-# message.creating.primary.storage=Creating primary storage
-# message.creating.secondary.storage=Creating secondary storage
-# message.Zone.creation.complete=Zone creation complete
-# message.enabling.zone=Enabling zone
-# error.something.went.wrong.please.correct.the.following=Something went wrong; please correct the following
-# error.could.not.enable.zone=Could not enable zone
-# message.zone.creation.complete.would.you.like.to.enable.this.zone=Zone creation complete. Would you like to enable this zone?
-# message.please.add.at.lease.one.traffic.range=Please add at least one traffic range.
-# message.you.must.have.at.least.one.physical.network=You must have at least one physical network
-# message.please.select.a.different.public.and.management.network.before.removing=Please select a different public and management network before removing
-
-# label.zone.type=Zone Type
-# label.setup.zone=Setup Zone
-# label.setup.network=Setup Network
-# label.add.resources=Add Resources
-label.launch=Start
-# label.set.up.zone.type=Set up zone type
-# message.please.select.a.configuration.for.your.zone=Please select a configuration for your zone.
-# message.desc.basic.zone=Provide a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering).
-# label.basic=Basic
-# message.desc.advanced.zone=For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support.
-label.advanced=Weitergehend
-# message.desc.zone=A zone is the largest organizational unit in CloudStack, and it typically corresponds to a single datacenter. Zones provide physical isolation and redundancy. A zone consists of one or more pods (each of which contains hosts and primary storage servers) and a secondary storage server which is shared by all pods in the zone.
-# label.physical.network=Physical Network        
-# label.public.traffic=Public traffic     
-# label.guest.traffic=Guest Traffic
-# label.storage.traffic=Storage Traffic
-# message.setup.physical.network.during.zone.creation=When adding an advanced zone, you need to set up one or more physical networks. Each network corresponds to a NIC on the hypervisor. Each physical network can carry one or more types of traffic, with certain restrictions on how they may be combined.<br/><br/><strong>Drag and drop one or more traffic types</strong> onto each physical network.
-# label.add.physical.network=Add physical network
-# label.traffic.types=Traffic Types
-# label.management=Management
-# label.guest=Guest
-# label.please.specify.netscaler.info=Please specify Netscaler info
-# message.public.traffic.in.advanced.zone=Public traffic is generated when VMs in the cloud access the internet. Publicly-accessible IPs must be allocated for this purpose. End users can use the CloudStack UI to acquire these IPs to implement NAT between their guest network and their public network.<br/><br/>Provide at least one range of IP addresses for internet traffic.
-# message.public.traffic.in.basic.zone=Public traffic is generated when VMs in the cloud access the Internet or provide services to clients over the Internet. Publicly accessible IPs must be allocated for this purpose. When a instance is created, an IP from this set of Public IPs will be allocated to the instance in addition to the guest IP address. Static 1-1 NAT will be set up automatically between the public IP and the guest IP. End users can also use the CloudStack UI to acquire additional IPs to implement static NAT between their instances and the public IP.
-# message.add.pod.during.zone.creation=Each zone must contain in one or more pods, and we will add the first pod now. A pod contains hosts and primary storage servers, which you will add in a later step. First, configure a range of reserved IP addresses for CloudStack's internal management traffic. The reserved IP range must be unique for each zone in the cloud.
-# message.guest.traffic.in.advanced.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of VLAN IDs to carry guest traffic for each physical network.
-# message.guest.traffic.in.basic.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of IP addresses that CloudStack can assign to guest VMs. Make sure this range does not overlap the reserved system IP range.
-# message.storage.traffic=Traffic between CloudStack's internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs. Please configure storage traffic here.
-# message.desc.cluster=Each pod must contain one or more clusters, and we will add the first cluster now. A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Each cluster consists of one or more hosts and one or more primary storage servers.
-# message.desc.host=Each cluster must contain at least one host (computer) for guest VMs to run on, and we will add the first host now. For a host to function in CloudStack, you must install hypervisor software on the host, assign an IP address to the host, and ensure the host is connected to the CloudStack management server.<br/><br/>Give the host's DNS or IP address, the user name (usually root) and password, and any labels you use to categorize hosts.
-# message.desc.primary.storage=Each cluster must contain one or more primary storage servers, and we will add the first one now. Primary storage contains the disk volumes for all the VMs running on hosts in the cluster. Use any standards-compliant protocol that is supported by the underlying hypervisor.
-# message.desc.secondary.storage=Each zone must have at least one NFS or secondary storage server, and we will add the first one now. Secondary storage stores VM templates, ISO images, and VM disk volume snapshots. This server must be available to all hosts in the zone.<br/><br/>Provide the IP address and exported path.
-# label.launch.zone=Launch zone 
-# message.please.wait.while.zone.is.being.created=Please wait while your zone is being created; this may take a while...
-
-# label.load.balancing=Load Balancing
-# label.static.nat.enabled=Static NAT Enabled
-# label.zones=Zones
-# label.view.more=View more
-# label.number.of.zones=Number of Zones
-# label.number.of.pods=Number of Pods
-# label.number.of.clusters=Number of Clusters
-# label.number.of.hosts=Number of Hosts
-# label.total.hosts=Total Hosts
-label.total.CPU=Gesamtanzahl CPU
-# label.total.memory=Total Memory
-# label.total.storage=Total Storage
-# label.purpose=Purpose
-
-
-
-
-# label.action.migrate.router=Migrate Router
-# label.action.migrate.router.processing=Migrating Router....
-# message.migrate.router.confirm=Please confirm the host you wish to migrate the router to\:
-# label.migrate.router.to=Migrate Router to
-
-# label.action.migrate.systemvm=Migrate System VM
-# label.action.migrate.systemvm.processing=Migrating System VM....
-# message.migrate.systemvm.confirm=Please confirm the host you wish to migrate the system VM to\:
-# label.migrate.systemvm.to=Migrate System VM to
-
-
-# mode=Mode
-# side.by.side=Side by Side
-# inline=Inline
-
-# extractable=Extractable
-
-label.ocfs2=OCFS2
-
-label.action.edit.host=Bearbeite Host
-
-network.rate=Netzwerk-Rate
-
-ICMP.type=ICMP-Typ
+#Stored by I18NEdit, may be edited!
 ICMP.code=ICMP Code
-
-image.directory=Bildverzeichnis
-
-label.action.create.template.from.vm=Erstelle Vorlage aus VM
-label.action.create.template.from.volume=Erstelle Vorlage vom Datenträger
-
-message.vm.create.template.confirm=Das Erstellen einer Vorlage führt automatisch zu einem Neustart der VM.
-
-label.action.manage.cluster=Verwalte Cluster
-message.action.manage.cluster=Bitte bestätigen Sie, dass das Cluster bearbeitet werden soll.
-label.action.manage.cluster.processing=Verwaltung des Clusters....
-
-label.action.unmanage.cluster=Vernachlässige Cluster
-message.action.unmanage.cluster=Bitte bestätigen Sie, dass Sie das Cluster vernachlässigen möchten.
-label.action.unmanage.cluster.processing=Vernachlässigung des Clusters ....
-
-label.allocation.state=Belegungszustand
-# managed.state=Managed State
-
-label.default.use=Standardeinstellung nutzen
-# label.host.tags=Host Tags 
-
-label.cidr=CIDR
-label.cidr.list=Quelle CIDR
-
-label.storage.tags=Datenspeicher-Markierung
-
-label.redundant.router=Redundanter Router
-label.is.redundant.router=Redundant
-
-force.delete=Erzwinge Löschung
-force.delete.domain.warning=Achtung\: Diese Auswahl führt zu einer Löschung aller untergeordneten Domains und aller angeschlossenen Konten sowie ihrer Quellen.
-
+ICMP.type=ICMP-Typ
+error.installWizard.message=Ein Fehler ist aufgetreten; Sie k\u00F6nnen zur\u00FCckgehen und den Fehler korregieren
+error.login=Ihr Benutzername / Passwort stimmt nicht mit uneren unseren Aufzeichnungen \u00FCberein.
+error.session.expired=Ihre Sitzung ist abgelaufen.
+force.delete=Erzwinge L\u00F6schung
+force.delete.domain.warning=Achtung\: Diese Auswahl f\u00FChrt zu einer L\u00F6schung aller untergeordneten Domains und aller angeschlossenen Konten sowie ihrer Quellen.
 force.remove=Erzwinge Entfernung
-force.remove.host.warning=Achtung\: Diese Auswahl wird CloudStack zum sofortigen Anhalten der virtuellen Maschine führen, bevor der Host vom Cluster entfernt wurde.  
-
+force.remove.host.warning=Achtung\: Diese Auswahl wird CloudStack zum sofortigen Anhalten der virtuellen Maschine f\u00FChren, bevor der Host vom Cluster entfernt wurde.  
 force.stop=Erzwinge Abbruch
-# force.stop.instance.warning=Warning\: Forcing a stop on this instance should be your last option. It can lead to data loss as well as inconsistent behavior of the virtual machine state.
-
-label.PreSetup=Voreinstellung
-# label.SR.name = SR Name-Label
-label.SharedMountPoint=Geteilter Einhängepunkt
-# label.clvm=CLVM
-# label.volgroup=Volume Group
-label.VMFS.datastore=VMFS Datenspeicher
-
-label.network.device=Netzwerkgerät
-label.add.network.device=Hinzufügen eines Netzwerkgerätes
-label.network.device.type=Netzwerkgerätetyp
+image.directory=Bildverzeichnis
+label.CPU.cap=CPU Obergrenze
 label.DHCP.server.type=DHCP Server Type
-label.Pxe.server.type=PXE Server Type
-label.PING.storage.IP=IP des externen Speichers anpingen
+label.PING.CIFS.password=PING CIFS Passwort
+label.PING.CIFS.username=PING CIFS Benutzername
 label.PING.dir=PING-Verzeichnis
+label.PING.storage.IP=IP des externen Speichers anpingen
+label.PreSetup=Voreinstellung
+label.Pxe.server.type=PXE Server Type
+label.SharedMountPoint=Geteilter Einh\u00E4ngepunkt
 label.TFTP.dir=TFTP-Verzeichnis
-label.PING.CIFS.username=PING CIFS Benutzername
-label.PING.CIFS.password=PING CIFS Passwort
-label.CPU.cap=CPU Obergrenze
-
-
-label.action.enable.zone=Aktivieren der Zone
-label.action.enable.zone.processing=Aktivierung der Zone....
-message.action.enable.zone=Bitte bestätigen Sie, dass Sie diese Zone aktivieren möchten.
-label.action.disable.zone=Deaktivieren der Zone
-label.action.disable.zone.processing=Deaktivierung der Zone....
-message.action.disable.zone=Bitte bestätigen Sie, dass Sie diese Zone deaktivieren möchten.
-
-label.action.enable.pod=Aktiviere Pod
-label.action.enable.pod.processing=Aktivierung des Pod....
-message.action.enable.pod=Bitte bestätigen Sie, dass Sie diesen Pod aktivieren möchten.
-label.action.disable.pod=Deaktiviere Pod
-label.action.disable.pod.processing=Deaktivierung des Pod....
-message.action.disable.pod=Bitte bestätigen Sie, dass Sie diesen Pod deaktivieren möchten.
-
-label.action.enable.cluster=Aktivieren des Clusters
-label.action.enable.cluster.processing=Aktivierung des Clusters....
-message.action.enable.cluster=Bitte bestätigen Sie, dass Sie diesen Cluster aktivieren möchten.
-label.action.disable.cluster=Deaktivieren des Clusters
-label.action.disable.cluster.processing=Deaktivierung des Clusters....
-message.action.disable.cluster=Bitte bestätigen Sie, dass Sie diesen Cluster deaktivieren möchten.
-
+label.VMFS.datastore=VMFS Datenspeicher
+label.account=Benutzerkonto
 label.account.id=Benutzerkonto-ID
 label.account.name=Benutzerkonto-Name
 label.account.specific=Besonderheiten des Benutzerkontos
-label.account=Benutzerkonto
 label.accounts=Benutzerkonten
 label.acquire.new.ip=Neue IP erwerben
-label.show.ingress.rule=Zeige Regeln, die den Zutritt steuern
-label.hide.ingress.rule=Verstecke Regeln, die den Zutritt steuern
-label.action.attach.disk.processing=Hinzufügen einer Festplatte ....
-label.action.attach.disk=Festplatte hinzufügen
-label.action.attach.iso.processing=Hinzufügen einer ISO....
-label.action.attach.iso=ISO hinzufügen
-label.action.cancel.maintenance.mode.processing=Abbruch des Wartungsmodus
+label.action.attach.disk=Festplatte hinzuf\u00FCgen
+label.action.attach.disk.processing=Hinzuf\u00FCgen einer Festplatte ....
+label.action.attach.iso=ISO hinzuf\u00FCgen
+label.action.attach.iso.processing=Hinzuf\u00FCgen einer ISO....
 label.action.cancel.maintenance.mode=Wartungsmodus abbrechen
-label.action.change.password=Passwort ändern
+label.action.cancel.maintenance.mode.processing=Abbruch des Wartungsmodus
+label.action.change.password=Passwort \u00E4ndern
+label.action.change.service=Dienst \u00E4ndern
 label.action.change.service.processing=Wechseln des Dienstes ....
-label.action.change.service=Dienst ändern
-label.action.copy.ISO.processing=Kopieren der ISO ....
 label.action.copy.ISO=ISO kopieren
-label.action.copy.template.processing=Kopieren der Vorlage ....
+label.action.copy.ISO.processing=Kopieren der ISO ....
 label.action.copy.template=Vorlage kopieren
-label.action.create.template.processing=Erstellen der Vorlage ....
+label.action.copy.template.processing=Kopieren der Vorlage ....
 label.action.create.template=Vorlage erstellen
-label.action.create.vm.processing=Erstellung der VM....
+label.action.create.template.from.vm=Erstelle Vorlage aus VM
+label.action.create.template.from.volume=Erstelle Vorlage vom Datentr\u00E4ger
+label.action.create.template.processing=Erstellen der Vorlage ....
 label.action.create.vm=Erstelle VM
-label.action.create.volume.processing=Erstellen von Volume ....
+label.action.create.vm.processing=Erstellung der VM....
 label.action.create.volume=Erstelle Volume
-label.action.delete.IP.range.processing=Löschen von IP-Bereich ....
-label.action.delete.IP.range=IP-Bereich löschen
-label.action.delete.ISO.processing=Löschen der ISO ....
-label.action.delete.ISO=ISO löschen
-label.action.delete.account.processing=Löschung des Benutzerkontos ....
-label.action.delete.account=Benutzerkonto löschen
-label.action.delete.cluster.processing=Löschung des Clusters ....
-label.action.delete.cluster=Löschen des Clusters
-label.action.delete.disk.offering.processing=Löschen des Festplatten-Angebots ....
-label.action.delete.disk.offering=Festplatten-Angebot löschen
-
-# label.action.update.resource.count=Update Resource Count
-# label.action.update.resource.count.processing=Updating Resource Count....
-
-label.action.delete.domain=Löschen der Domain
-label.action.delete.domain.processing=Löschung der Domain ....
-
-label.action.delete.firewall.processing=Löschung der Firewall ....
-# label.action.delete.firewall=Delete firewall rule
-label.action.delete.ingress.rule.processing=Löschen der Zutrittsregel ....
-label.action.delete.ingress.rule=Zutrittsregel löschen
+label.action.create.volume.processing=Erstellen von Volume ....
+label.action.delete.IP.range=IP-Bereich l\u00F6schen
+label.action.delete.IP.range.processing=L\u00F6schen von IP-Bereich ....
+label.action.delete.ISO=ISO l\u00F6schen
+label.action.delete.ISO.processing=L\u00F6schen der ISO ....
+label.action.delete.account=Benutzerkonto l\u00F6schen
+label.action.delete.account.processing=L\u00F6schung des Benutzerkontos ....
+label.action.delete.cluster=L\u00F6schen des Clusters
+label.action.delete.cluster.processing=L\u00F6schung des Clusters ....
+label.action.delete.disk.offering=Festplatten-Angebot l\u00F6schen
+label.action.delete.disk.offering.processing=L\u00F6schen des Festplatten-Angebots ....
+label.action.delete.domain=L\u00F6schen der Domain
+label.action.delete.domain.processing=L\u00F6schung der Domain ....
+label.action.delete.firewall.processing=L\u00F6schung der Firewall ....
+label.action.delete.ingress.rule=Zutrittsregel l\u00F6schen
+label.action.delete.ingress.rule.processing=L\u00F6schen der Zutrittsregel ....
 label.action.delete.load.balancer.processing=Beendigung der Serverlastverteilung....
-# label.action.delete.load.balancer=Delete load balancer rule
-label.action.edit.network.processing=Bearbeitung des Netzwerks ....
-label.action.edit.network=Bearbeiten des Netzwerks
-label.action.delete.network.processing=Löschung des Netzwerks ....
-label.action.delete.network=Löschen des Netzwerks
-label.action.delete.pod.processing=Löschen des Pod ....
-label.action.delete.pod=Pod löschen
-label.action.delete.primary.storage.processing=Löschen des Hauptspeichers ....
-label.action.delete.primary.storage=Hauptspeicher löschen
-label.action.delete.secondary.storage.processing=Löschen des Sekundärspeichers....
-label.action.delete.secondary.storage=Sekundärspeicher löschen
-label.action.delete.security.group.processing=Löschen der Sicherheitsgruppe ....
-label.action.delete.security.group=Sicherheitsgruppe löschen
-label.action.delete.service.offering.processing=Löschen des Serviceangebots ....
-label.action.delete.service.offering=Serviceangebot löschen
-label.action.delete.snapshot.processing=Löschen des Schnappschusses....
-label.action.delete.snapshot=Schnappschuss löschen
-label.action.delete.template.processing=Löschen der Vorlage ....
-label.action.delete.template=Vorlage löschen
-label.action.delete.user.processing=Löschung des Benutzers ....
-label.action.delete.user=Benutzer löschen
-label.action.delete.volume.processing=Löschen des Datenträgers....
-label.action.delete.volume=Datenträger löschen
-label.action.delete.zone.processing=Löschen der Zone ....
-label.action.delete.zone=Zone löschen
-label.action.destroy.instance.processing=Die Vernichtung der Instanz....
+label.action.delete.network=L\u00F6schen des Netzwerks
+label.action.delete.network.processing=L\u00F6schung des Netzwerks ....
+label.action.delete.pod=Pod l\u00F6schen
+label.action.delete.pod.processing=L\u00F6schen des Pod ....
+label.action.delete.primary.storage=Hauptspeicher l\u00F6schen
+label.action.delete.primary.storage.processing=L\u00F6schen des Hauptspeichers ....
+label.action.delete.secondary.storage=Sekund\u00E4rspeicher l\u00F6schen
+label.action.delete.secondary.storage.processing=L\u00F6schen des Sekund\u00E4rspeichers....
+label.action.delete.security.group=Sicherheitsgruppe l\u00F6schen
+label.action.delete.security.group.processing=L\u00F6schen der Sicherheitsgruppe ....
+label.action.delete.service.offering=Serviceangebot l\u00F6schen
+label.action.delete.service.offering.processing=L\u00F6schen des Serviceangebots ....
+label.action.delete.snapshot=Schnappschuss l\u00F6schen
+label.action.delete.snapshot.processing=L\u00F6schen des Schnappschusses....
+label.action.delete.template=Vorlage l\u00F6schen
+label.action.delete.template.processing=L\u00F6schen der Vorlage ....
+label.action.delete.user=Benutzer l\u00F6schen
+label.action.delete.user.processing=L\u00F6schung des Benutzers ....
+label.action.delete.volume=Datentr\u00E4ger l\u00F6schen
+label.action.delete.volume.processing=L\u00F6schen des Datentr\u00E4gers....
+label.action.delete.zone=Zone l\u00F6schen
+label.action.delete.zone.processing=L\u00F6schen der Zone ....
 label.action.destroy.instance=Die Instanz vernichten
-label.action.destroy.systemvm.processing=Vernichtung des System-VM ....
+label.action.destroy.instance.processing=Die Vernichtung der Instanz....
 label.action.destroy.systemvm=System-VM vernichten
-label.action.detach.disk.processing=Entfernen der Festplatte
+label.action.destroy.systemvm.processing=Vernichtung des System-VM ....
 label.action.detach.disk=Festplatte entfernen
-label.action.detach.iso.processing=Entfernen von ISO ....
+label.action.detach.disk.processing=Entfernen der Festplatte
 label.action.detach.iso=ISO entfernen
-label.action.disable.account.processing=Deaktivierung des Benutzerkontos ....
+label.action.detach.iso.processing=Entfernen von ISO ....
 label.action.disable.account=Benutzerkonto deaktivieren
-label.action.disable.static.NAT.processing=Deaktivieren der statischen NAT ....
+label.action.disable.account.processing=Deaktivierung des Benutzerkontos ....
+label.action.disable.cluster=Deaktivieren des Clusters
+label.action.disable.cluster.processing=Deaktivierung des Clusters....
+label.action.disable.pod=Deaktiviere Pod
+label.action.disable.pod.processing=Deaktivierung des Pod....
 label.action.disable.static.NAT=Statische NAT deaktivieren
-label.action.disable.user.processing=Deaktivierung des Benutzers ....
+label.action.disable.static.NAT.processing=Deaktivieren der statischen NAT ....
 label.action.disable.user=Benutzer deaktivieren
+label.action.disable.user.processing=Deaktivierung des Benutzers ....
+label.action.disable.zone=Deaktivieren der Zone
+label.action.disable.zone.processing=Deaktivierung der Zone....
 label.action.download.ISO=ISO herunterladen
 label.action.download.template=Vorlage herunterladen
-label.action.download.volume.processing=Herunterladen des Volumes ....
 label.action.download.volume=Volume herunterladen
+label.action.download.volume.processing=Herunterladen des Volumes ....
 label.action.edit.ISO=ISO bearbeiten
 label.action.edit.account=Benutzerkonto bearbeiten
 label.action.edit.disk.offering=Bearbeiten des Festplatten-Angebots
 label.action.edit.domain=Domain bearbeiten
 label.action.edit.global.setting=Globale Einstellungen bearbeiten
+label.action.edit.host=Bearbeite Host
 label.action.edit.instance=Instanz bearbeiten
+label.action.edit.network=Bearbeiten des Netzwerks
 label.action.edit.network.offering=Bearbeiten des Netzwerk-Angebots
+label.action.edit.network.processing=Bearbeitung des Netzwerks ....
 label.action.edit.pod=Bearbeiten des Pods
 label.action.edit.primary.storage=Hauptspeicher bearbeiten
 label.action.edit.resource.limits=Resourcen Grenzen bearbeiten
@@ -898,183 +144,200 @@ label.action.edit.service.offering=Service-Angebot bearbeiten
 label.action.edit.template=Vorlage bearbeiten
 label.action.edit.user=Benutzer bearbeiten
 label.action.edit.zone=Zone bearbeiten
-label.action.enable.account.processing=Aktivierung des Kontos....
 label.action.enable.account=Konto aktivieren
-label.action.enable.maintenance.mode.processing=Aktivieren des Wartungsmodus
+label.action.enable.account.processing=Aktivierung des Kontos....
+label.action.enable.cluster=Aktivieren des Clusters
+label.action.enable.cluster.processing=Aktivierung des Clusters....
 label.action.enable.maintenance.mode=Wartungsmodus aktivieren
-label.action.enable.static.NAT.processing=Aktivieren der statischen NAT ....
+label.action.enable.maintenance.mode.processing=Aktivieren des Wartungsmodus
+label.action.enable.pod=Aktiviere Pod
+label.action.enable.pod.processing=Aktivierung des Pod....
 label.action.enable.static.NAT=Statische NAT aktivieren
-label.action.enable.user.processing=Aktivierung des Nutzers...
+label.action.enable.static.NAT.processing=Aktivieren der statischen NAT ....
 label.action.enable.user=Nutzer aktivieren
-label.action.force.reconnect.processing=Wieder verbinden....
+label.action.enable.user.processing=Aktivierung des Nutzers...
+label.action.enable.zone=Aktivieren der Zone
+label.action.enable.zone.processing=Aktivierung der Zone....
 label.action.force.reconnect=Erzwinge wieder verbinden
-label.action.generate.keys.processing=Genieren der Schlüssel
-label.action.generate.keys=Schlüssel generieren
-label.action.lock.account.processing=Kontosperrung ....
+label.action.force.reconnect.processing=Wieder verbinden....
+label.action.generate.keys=Schl\u00FCssel generieren
+label.action.generate.keys.processing=Genieren der Schl\u00FCssel
 label.action.lock.account=Konto sperren
+label.action.lock.account.processing=Kontosperrung ....
+label.action.manage.cluster=Verwalte Cluster
+label.action.manage.cluster.processing=Verwaltung des Clusters....
 label.action.migrate.instance=Mit einer Instanz umziehen
 label.action.migrate.instance.processing=Umziehen einer Instanz
-label.action.reboot.instance.processing=Neustarten der Instanz...
 label.action.reboot.instance=Instanz neustarten
-label.action.reboot.router.processing=Neustart vom Router ....
+label.action.reboot.instance.processing=Neustarten der Instanz...
 label.action.reboot.router=Router neu starten 
-label.action.reboot.systemvm.processing=Neustart-System VM ....
+label.action.reboot.router.processing=Neustart vom Router ....
 label.action.reboot.systemvm=System VM neu starten
-# label.action.recurring.snapshot=Recurring Snapshots
-label.action.release.ip.processing=Veröffentlichung der IP....
-label.action.release.ip=IP veröffentlichen
-label.action.remove.host.processing=Entfernen des Hosts....
+label.action.reboot.systemvm.processing=Neustart-System VM ....
+label.action.release.ip=IP ver\u00F6ffentlichen
+label.action.release.ip.processing=Ver\u00F6ffentlichung der IP....
 label.action.remove.host=Host entfernen
-label.action.reset.password.processing=Zurücksetzen des Passworts ....
-label.action.reset.password=Passwort zurücksetzen
+label.action.remove.host.processing=Entfernen des Hosts....
+label.action.reset.password=Passwort zur\u00FCcksetzen
+label.action.reset.password.processing=Zur\u00FCcksetzen des Passworts ....
 label.action.resource.limits=Grenzen der Ressourcen
-label.action.restore.instance.processing=Wiederherstellen der Instanz....
 label.action.restore.instance=Instanz wiederherstellen
-label.action.start.instance.processing=Beginnen mit der Instanz....
+label.action.restore.instance.processing=Wiederherstellen der Instanz....
 label.action.start.instance=Instanz beginnen
-label.action.start.router.processing=Starten des Routers ....
+label.action.start.instance.processing=Beginnen mit der Instanz....
 label.action.start.router=Router starten
-label.action.start.systemvm.processing=Starten von System VM ....
+label.action.start.router.processing=Starten des Routers ....
 label.action.start.systemvm=System VM starten
-label.action.stop.instance.processing=Stoppen der Instanz....
+label.action.start.systemvm.processing=Starten von System VM ....
 label.action.stop.instance=Instanz stoppen
-label.action.stop.router.processing=Stoppen des Routers ....
+label.action.stop.instance.processing=Stoppen der Instanz....
 label.action.stop.router=Router stoppen
-label.action.stop.systemvm.processing=Stoppen vom System VM ....
+label.action.stop.router.processing=Stoppen des Routers ....
 label.action.stop.systemvm=System VM stoppen
-label.action.take.snapshot.processing=Schnappschuss erstellen...
+label.action.stop.systemvm.processing=Stoppen vom System VM ....
 label.action.take.snapshot=Schnappschuss erstellen
-label.action.update.OS.preference.processing=Aktualisierung der Betriebssystem Präverenz....
-label.action.update.OS.preference=Betriebssystem Präverenz aktualisieren
+label.action.take.snapshot.processing=Schnappschuss erstellen...
+label.action.unmanage.cluster=Vernachl\u00E4ssige Cluster
+label.action.unmanage.cluster.processing=Vernachl\u00E4ssigung des Clusters ....
+label.action.update.OS.preference=Betriebssystem Pr\u00E4verenz aktualisieren
+label.action.update.OS.preference.processing=Aktualisierung der Betriebssystem Pr\u00E4verenz....
 label.actions=Aktionen
 label.active.sessions=Aktive Sitzungen
-label.add.account=Konto hinzufügen
-label.add.by.cidr=Hinzufügen durch CIDR
-label.add.by.group=Hinzufügen durch Gruppe
-label.add.cluster=Cluster hinzufügen
-label.add.direct.iprange=Direkten Ip-Bereich hinzufügen
-label.add.disk.offering=Festplatten-Angebot hinzufügen
-label.add.domain=Domain hinzufügen
-# label.add.firewall=Add firewall rule
-label.add.host=Host hinzufügen
-label.add.ingress.rule=Zutrittsregel hinzufügen
-label.add.ip.range=IP Bereich hinzufügen
-label.add.load.balancer=Serverlastverteilung hinzufügen
-label.add.more=Mehr hinzufügen
-label.add.network=Netzwerk hinzufügen
-label.add.pod=Pod hinzufügen
-label.add.primary.storage=Hauptspeicher hinzufügen
-label.add.secondary.storage=Sekundärspeicher hinzufügen
-label.add.security.group=Sicherheitsgruppe hinzufügen
-label.add.service.offering=Service-Angebot hinzufügen
-label.add.template=Vorlage hinzufügen
-label.add.user=Benutzer hinzufügen
-label.add.vlan=VLAN hinzufügen
-label.add.volume=Volume hinzufügen
-label.add.zone=Zone hinzufügen
-label.add=Hinzufügen
-label.adding.cluster=Cluster hinzufügen
-label.adding.failed=Hinzufügen fehlgeschlagen
-label.adding.pod=Hinzufügen des Pods
-label.adding.processing=Hinzufügen....
-label.adding.succeeded=Erfolgreich hinzugefügt
-label.adding.user=Nutzer hinzufügen
-label.adding.zone=Hinzufügen der Zone
-label.adding=Hinzufügen
-label.additional.networks=Zusätzliche Networks
-label.admin.accounts=Administrator-Konten
+label.add=Hinzuf\u00FCgen
+label.add.account=Konto hinzuf\u00FCgen
+label.add.by.cidr=Hinzuf\u00FCgen durch CIDR
+label.add.by.group=Hinzuf\u00FCgen durch Gruppe
+label.add.cluster=Cluster hinzuf\u00FCgen
+label.add.direct.iprange=Direkten Ip-Bereich hinzuf\u00FCgen
+label.add.disk.offering=Festplatten-Angebot hinzuf\u00FCgen
+label.add.domain=Domain hinzuf\u00FCgen
+label.add.host=Host hinzuf\u00FCgen
+label.add.ingress.rule=Zutrittsregel hinzuf\u00FCgen
+label.add.ip.range=IP Bereich hinzuf\u00FCgen
+label.add.load.balancer=Serverlastverteilung hinzuf\u00FCgen
+label.add.more=Mehr hinzuf\u00FCgen
+label.add.network=Netzwerk hinzuf\u00FCgen
+label.add.network.device=Hinzuf\u00FCgen eines Netzwerkger\u00E4tes
+label.add.pod=Pod hinzuf\u00FCgen
+label.add.primary.storage=Hauptspeicher hinzuf\u00FCgen
+label.add.secondary.storage=Sekund\u00E4rspeicher hinzuf\u00FCgen
+label.add.security.group=Sicherheitsgruppe hinzuf\u00FCgen
+label.add.service.offering=Service-Angebot hinzuf\u00FCgen
+label.add.system.service.offering=System-Service-Angebot hinzuf\u00FCgen
+label.add.template=Vorlage hinzuf\u00FCgen
+label.add.user=Benutzer hinzuf\u00FCgen
+label.add.vlan=VLAN hinzuf\u00FCgen
+label.add.volume=Volume hinzuf\u00FCgen
+label.add.zone=Zone hinzuf\u00FCgen
+label.adding=Hinzuf\u00FCgen
+label.adding.cluster=Cluster hinzuf\u00FCgen
+label.adding.failed=Hinzuf\u00FCgen fehlgeschlagen
+label.adding.pod=Hinzuf\u00FCgen des Pods
+label.adding.processing=Hinzuf\u00FCgen....
+label.adding.succeeded=Erfolgreich hinzugef\u00FCgt
+label.adding.user=Nutzer hinzuf\u00FCgen
+label.adding.zone=Hinzuf\u00FCgen der Zone
+label.additional.networks=Zus\u00E4tzliche Networks
 label.admin=Administrator
+label.admin.accounts=Administrator-Konten
+label.advanced=Weitergehend
 label.advanced.mode=Erweiterter Modus
 label.advanced.search=Erweiterte Suche
-label.advanced=Weitergehend
 label.alert=Warnung
 label.algorithm=Algorithmus
 label.allocated=Zugeteilt
-label.api.key=API Schlüssel
-label.assign.to.load.balancer=Instanz zum Lastverteiler hinzufügen
+label.allocation.state=Belegungszustand
+label.api.key=API Schl\u00FCssel
 label.assign=Zuweisen
+label.assign.to.load.balancer=Instanz zum Lastverteiler hinzuf\u00FCgen
 label.associated.network.id=Assozierte Netzwerk ID
-label.attached.iso=Angehängte ISO
-label.availability.zone=Verfügbare Zone
-label.availability=Verfügbarkeit
-label.available.public.ips=Verfügbaren öffentlichen IP-Adressen
-label.available=Verfügbar
-label.back=Zurück
+label.attached.iso=Angeh\u00E4ngte ISO
+label.availability=Verf\u00FCgbarkeit
+label.availability.zone=Verf\u00FCgbare Zone
+label.available=Verf\u00FCgbar
+label.available.public.ips=Verf\u00FCgbaren \u00F6ffentlichen IP-Adressen
+label.back=Zur\u00FCck
 label.basic.mode=Grundmodus
 label.bootable=Bootbar
-label.broadcast.domain.type=Benachrichtigung an alle Nutzer über Domain Typ
+label.broadcast.domain.type=Benachrichtigung an alle Nutzer \u00FCber Domain Typ
 label.by.account=Nach Benutzerkonto
-label.by.availability=Nach Verfügbarkeit
+label.by.availability=Nach Verf\u00FCgbarkeit
 label.by.domain=Nach Domain
 label.by.end.date=Nach Endedatum
 label.by.level=Nach Level
 label.by.pod=Nach Pod
 label.by.role=Nach Rolle
 label.by.start.date=Nach Beginndatum
-label.by.state=über den Zustand
+label.by.state=\u00FCber den Zustand
 label.by.traffic.type=Nach Traffic-Typ
-label.by.type.id=Nach Typ ID
 label.by.type=Nach Typ
+label.by.type.id=Nach Typ ID
 label.by.zone=Nach Zone
 label.bytes.received=Empfangene Bytes
 label.bytes.sent=Gesendete Bytes
 label.cancel=Abbrechen
 label.certificate=Zertifikat
-# label.privatekey=PKCS\#8 Private Key
-label.domain.suffix=DNS Domainsuffix (z.B. xzy.com)
 label.character=Buchstabe
+label.cidr=CIDR
 label.cidr.account=CIDR oder Benutzerkonto/Sicherheitsgruppe
+label.cidr.list=Quelle CIDR
 label.close=Schliessen
 label.cloud.console=Cloud Management Konsole
 label.cloud.managed=Geleitet von cloud.com 
-label.cluster.type=Cluster-Typ
 label.cluster=Cluster
+label.cluster.type=Cluster-Typ
 label.code=Code
-label.confirmation=Bestätigung
-# label.cpu.allocated.for.VMs=CPU Allocated for VMs
+label.configuration=Konfiguration
+label.confirmation=Best\u00E4tigung
+label.congratulations=Herzlichen Gl\u00FCckwunsch
+label.corrections.saved=Korrekturen gespeichert
+label.cpu=CPU
 label.cpu.allocated=Zugeteilte CPU 
+label.cpu.mhz=CPU (in MHz)
 label.cpu.utilized=genutzte CPU
-label.cpu=CPU
 label.created=Erstellt
-label.cross.zones=überschneidende Zonen
-label.custom.disk.size=Benutzerdefinierte Festplattengrösse
-label.daily=Täglich
+label.cross.zones=\u00FCberschneidende Zonen
+label.custom.disk.size=Benutzerdefinierte Festplattengr\u00F6sse
+label.daily=T\u00E4glich
 label.data.disk.offering=Daten-Speicherplatz-Angebot
 label.date=Datum
 label.day.of.month=Tag des Monats
 label.day.of.week=Tag der Woche
-label.delete=Löschen
-label.deleting.failed=Löschen fehlgeschlagen
-label.deleting.processing=Löschen ....
+label.default.use=Standardeinstellung nutzen
+label.delete=L\u00F6schen
+label.deleting.failed=L\u00F6schen fehlgeschlagen
+label.deleting.processing=L\u00F6schen ....
 label.description=Beschreibung
+label.destroy=Zerst\u00F6ren
 label.detaching.disk=Entfernen der Festplatte
 label.details=Details
-label.device.id=Geräte-ID
+label.device.id=Ger\u00E4te-ID
 label.disabled=Deaktiviert
 label.disabling.vpn.access=Deaktivierung des VPN Zugangs
 label.disk.allocated=Zugeordnete Festplatte
 label.disk.offering=Festplatten-Angebot
-label.disk.size.gb=Festplattengröße (in GB)
-label.disk.size=Festplattengröße
+label.disk.size=Festplattengr\u00F6\u00DFe
+label.disk.size.gb=Festplattengr\u00F6\u00DFe (in GB)
 label.disk.total=Gesamtzahl der Festplatten
 label.disk.volume=Festplatten Volume
 label.display.text=Anzeigetext
 label.dns.1=DNS 1
 label.dns.2=DNS 2
+label.domain=Domain
 label.domain.admin=Domain Administrator
 label.domain.id=Domain ID
 label.domain.name=Domain Name
-label.domain=Domain
-label.double.quotes.are.not.allowed=Anführungszeichen sind nicht erlaubt
+label.domain.suffix=DNS Domainsuffix (z.B. xzy.com)
+label.double.quotes.are.not.allowed=Anf\u00FChrungszeichen sind nicht erlaubt
 label.download.progress=Download-Fortschritt
 label.edit=Bearbeiten
 label.email=E-Mail
-label.enabling.vpn.access=Aktivieren des VPN-Zugriffs
 label.enabling.vpn=VPN aktivieren
+label.enabling.vpn.access=Aktivieren des VPN-Zugriffs
 label.end.port=Beende Port
 label.endpoint.or.operation=Endpunkt oder Bedienung
-label.error.code=Fehlercode
 label.error=Fehler
+label.error.code=Fehlercode
 label.esx.host=ESX / ESXi-Host
 label.example=Beispiel
 label.failed=Fehlgeschlagen
@@ -1091,74 +354,83 @@ label.go.step.2=Gehe zu Schritt 2
 label.go.step.3=Weiter zu Schritt 3
 label.go.step.4=Weiter mit Schritt 4
 label.go.step.5=Weiter mit Schritt 5
-label.group.optional=Gruppe (optional)
 label.group=Gruppe
+label.group.optional=Gruppe (optional)
 label.guest.cidr=Gast CIDR
 label.guest.gateway=Gast-Schnittstelle
-label.guest.ip.range=Gast IP Berecih
 label.guest.ip=Gast IP-Adresse
+label.guest.ip.range=Gast IP Berecih
 label.guest.netmask=Gast Netzmaske
 label.ha.enabled=HA aktiviert
 label.help=Hilfe
+label.hide.ingress.rule=Verstecke Regeln, die den Zutritt steuern
+label.host=Host
 label.host.alerts=Host Warnungen
 label.host.name=Host Name
-label.host=Host
 label.hosts=Hosts
-label.hourly=Stündlich
-label.hypervisor.type=Hypervisor Typ
+label.hourly=St\u00FCndlich
 label.hypervisor=Hypervisor
+label.hypervisor.type=Hypervisor Typ
 label.id=Identifikation
 label.info=Info
 label.ingress.rule=Zutrittsregel
 label.initiated.by=Initiiert durch
+label.installWizard.addClusterIntro.subtitle=Was ist ein Cluster?
+label.installWizard.addClusterIntro.title=cluster hinzuf\u00FCgen
+label.installWizard.addHostIntro.subtitle=Was ist ein host?
+label.installWizard.addHostIntro.title=host hinzuf\u00FCgen
+label.installWizard.addPodIntro.subtitle=Was ist ein pod?
+label.installWizard.addPodIntro.title=pod hinzuf\u00FCgen
+label.installWizard.addPrimaryStorageIntro.subtitle=Was ist primay storage?
+label.installWizard.addPrimaryStorageIntro.title=primary storage hinzuf\u00FCgen
+label.installWizard.addSecondaryStorageIntro.subtitle=Was ist secondary storage?
+label.installWizard.addSecondaryStorageIntro.title=secondary storage
+label.installWizard.addZone.title=zone hinzuf\u00FCgen
+label.installWizard.click.launch=Bitte den Start Button dr\u00FCcken
+label.instance=Instanz
 label.instance.limits=Instanz Grenzen
 label.instance.name=Name der Instanz
-label.instance=Instanz
 label.instances=Instanzen
 label.internal.dns.1=Interne DNS 1
 label.internal.dns.2=Interne DNS 2
 label.interval.type=Interval Typ
-label.invalid.integer=Ungültige Ganzzahl
-label.invalid.number=Ungültige Anzahl
+label.invalid.integer=Ung\u00FCltige Ganzzahl
+label.invalid.number=Ung\u00FCltige Anzahl
+label.ip=IP
 label.ip.address=IP-Adresse
-# label.ip.allocations=IP Allocations
-# label.ip.limits=Public IP Limits
 label.ip.or.fqdn=IP oder FQDN
 label.ip.range=IP-Bereich
-label.ip=IP
+label.ipaddress=IP-Adresse
 label.ips=IPs
 label.is.default=Ist vorgegeben
+label.is.redundant.router=Redundant
 label.is.shared=Gemeinsam
-# label.is.system=Is System
 label.iscsi=iSCSI
-label.iso.boot=ISO-Boot
 label.iso=ISO
-# label.isolation.mode=Isolation Mode
+label.iso.boot=ISO-Boot
 label.keep=Behalten
 label.lang.chinese=chinesisch (vereinfacht)
 label.lang.english=englisch
 label.lang.japanese=japanisch
 label.lang.spanish=spanisch
-# label.lang.russian=Russian
-# label.lang.french=French
-# label.lang.brportugese=Brazilian Portugese
 label.last.disconnected=Zuletzt getrennt
 label.last.name=Nachname
+label.launch=Start
 label.level=Ebene
-# label.linklocal.ip=Link Local IP Adddress
 label.load.balancer=Serverlastverteilung
 label.loading=Laden
 label.local=Lokal
-# label.local.storage.enabled=Local storage enabled
 label.login=Login
 label.logout=Abmelden
 label.lun=LUN
 label.manage=Verwalten
 label.maximum=Maximum
+label.may.continue=Sie k\u00F6nnen jetzt fortfahren
+label.memory=Speicher (in MB)
 label.memory.allocated=zugeordneter Speicher
+label.memory.mb=Speicher (in MB)
 label.memory.total=Speicher insgesamt
 label.memory.used=Genutzter Speicher
-label.memory=Speicher (in MB)
 label.menu.accounts=Benutzerkonten
 label.menu.alerts=Warnungen
 label.menu.all.accounts=Alle Konten
@@ -1167,204 +439,173 @@ label.menu.community.isos=Gemeinschaft ISOs
 label.menu.community.templates=Gemeinschaft Vorlagen
 label.menu.configuration=Konfiguration
 label.menu.dashboard=Dashboard
-label.menu.destroyed.instances=Zerstörte Instanzen
+label.menu.destroyed.instances=Zerst\u00F6rte Instanzen
 label.menu.disk.offerings=Festplatten-Angebote
 label.menu.domains=Domains
 label.menu.events=Events
 label.menu.featured.isos=Besondere ISOs
-# label.menu.featured.templates=Featured Templates
 label.menu.global.settings=Allgemeine Einstellungen
 label.menu.instances=Instanzen
 label.menu.ipaddresses=IP-Adressen
 label.menu.isos=ISOs
 label.menu.my.accounts=Meine Konten
-label.menu.my.instances=Meine Fälle
+label.menu.my.instances=Meine F\u00E4lle
 label.menu.my.isos=Meine ISOs
 label.menu.my.templates=Meine Vorlagen
-label.menu.network.offerings=Netzwerk-Angebote
 label.menu.network=Netzwerk
+label.menu.network.offerings=Netzwerk-Angebote
 label.menu.physical.resources=Technische Ressourcen
 label.menu.running.instances=Laufende Instanzen
 label.menu.security.groups=Sicherheitsgruppen
 label.menu.service.offerings=Service-Angebote
-label.menu.snapshots=Schnappschüsse
+label.menu.snapshots=Schnappsch\u00FCsse
 label.menu.stopped.instances=Beendete Instanzen
 label.menu.storage=Speicherung
-label.menu.system.vms=System VMs
 label.menu.system=System
+label.menu.system.vms=System VMs
 label.menu.templates=Vorlagen
-# label.menu.virtual.appliances=Virtual Appliances
 label.menu.virtual.resources=Virtuelle Ressourcen
 label.menu.volumes=Volumes
-# label.migrate.instance.to=Migrate instance to
+label.migrate.instance.to.host=Instanz auf einen anderen Host migrieren
+label.migrate.instance.to.ps=Instanz auf einen anderen Speicher migrieren
 label.minimum=Minimum
-# label.minute.past.hour=minute(s) Past the Hour
 label.monday=Montag
 label.monthly=Monatlich
 label.more.templates=Mehr Vorlagen
 label.my.account=Ihr Benutzerkonto
-label.name.optional=Name (Optional)
 label.name=Name
+label.name.optional=Name (Optional)
 label.netmask=Netzmaske
-# label.network.desc=Network Desc
+label.network=Netzwerk
+label.network.device=Netzwerkger\u00E4t
+label.network.device.type=Netzwerkger\u00E4tetyp
 label.network.domain=Netzwerk-Domain
 label.network.id=Netzwerk-ID
 label.network.name=Netzwerk Name
-# label.network.offering.display.text=Network Offering Display Text
-# label.network.offering.id=Network Offering ID
-# label.network.offering.name=Network Offering Name
 label.network.offering=Netzwerk-Angebot
 label.network.rate=Netzwerk-Rate
-# label.network.rate.megabytes=Network Rate (Mb/s)
-# label.network.read=Network Read
 label.network.type=Netzwerk-Typ
-# label.network.write=Network Write
-label.network=Netzwerk
 label.new.password=Neues Passwort
 label.next=Weiter
+label.nfs=NFS
 label.nfs.server=NFS Server
 label.nfs.storage=NFS-Speicher
-label.nfs=NFS
 label.nics=NICs
-label.no.actions=Nicht verfügbare Aktionen
+label.no=Nein
+label.no.actions=Nicht verf\u00FCgbare Aktionen
 label.no.alerts=Keine neuen Warnungen
 label.no.errors=Keine neuen Fehler
-label.no.isos=Kein verfügbaren ISOs
-label.no.items=Keine verfügbaren Einträge
-label.no.security.groups=Keine verfügbare Sicherheitsgruppe
-# label.no.thanks=No thanks
-label.no=Nein
+label.no.isos=Kein verf\u00FCgbaren ISOs
+label.no.items=Keine verf\u00FCgbaren Eintr\u00E4ge
+label.no.security.groups=Keine verf\u00FCgbare Sicherheitsgruppe
 label.none=Kein
 label.not.found=Nicht gefunden
-# label.num.cpu.cores=\# of CPU Cores
 label.numretries=Anzahl von Wiederholungen
+label.ocfs2=OCFS2
 label.offer.ha=HA anbieten
 label.optional=optional
-label.os.preference=OS Präferenz
+label.os.preference=OS Pr\u00E4ferenz
 label.os.type=OS Typ
-# label.owned.public.ips=Owned Public IP Addresses
-# label.owner.account=Owner Account
-# label.owner.domain=Owner Domain  
-# label.parent.domain=Parent Domain
-label.password.enabled=Passwort aktiviert
 label.password=Passwort
-# label.path=Path
+label.password.enabled=Passwort aktiviert
 label.please.wait=Bitte warten
 label.pod=Pod
-# label.port.forwarding=Port Forwarding
-# label.port.range=Port Range
-# label.prev=Prev
 label.primary.allocated=Zugewiesener Hauptspeicher
 label.primary.network=Hauptnetzwerk
 label.primary.storage=Hauptspeicher
 label.primary.used=Genutzter Hauptspeicher
 label.private.interface=Privates Interface
-# label.private.ip.range=Private IP Range
 label.private.ip=Private IP-Adresse
 label.private.ips=Private IP-Adressen
 label.private.port=Privater Port
 label.private.zone=Private Zone
 label.protocol=Protokoll
-label.public.interface=Öffentliches Interface
-label.public.ip=Öffentliche IP-Adresse
-label.public.ips=Öffentliche IP-Adressen
-label.public.port=Öffentlicher Port
-label.public.zone=Öffentliche Zone
-label.public=Öffentlich
+label.public=\u00D6ffentlich
+label.public.interface=\u00D6ffentliches Interface
+label.public.ip=\u00D6ffentliche IP-Adresse
+label.public.ips=\u00D6ffentliche IP-Adressen
+label.public.port=\u00D6ffentlicher Port
+label.public.zone=\u00D6ffentliche Zone
+label.reboot=Neustart
 label.recent.errors=Aktuelle Fehler
+label.redundant.router=Redundanter Router
 label.refresh=Aktualisieren
 label.related=Verwandt
-# label.remove.from.load.balancer=Removing instance from load balancer
 label.removing.user=Entfernen von Benutzern
 label.required=Erforderlich
-# label.reserved.system.ip=Reserved System IP
-# label.resource.limits=Resource Limits
 label.resource=Ressource
 label.resources=Ressourcen
 label.role=Rolle
-# label.root.disk.offering=Root Disk Offering
 label.running.vms=Laufende VMs
+label.s3.secret_key=Secret Key
 label.saturday=Samstag
 label.save=Sichern
 label.saving.processing=Sichern ....
-# label.scope=Scope
 label.search=Suche
-label.secondary.storage=Sekundärspeicher
-label.secondary.used=Genutzter Sekundärspeicher
+label.secondary.storage=Sekund\u00E4rspeicher
+label.secondary.used=Genutzter Sekund\u00E4rspeicher
 label.secret.key=Secret Key
-label.security.group.name=Sicherheitsgruppen-Name
 label.security.group=Sicherheitsgruppe
-label.security.groups.enabled=Sicherheitsgruppe aktiviert
+label.security.group.name=Sicherheitsgruppen-Name
 label.security.groups=Sicherheitsgruppen
+label.security.groups.enabled=Sicherheitsgruppe aktiviert
 label.sent=Versendet
 label.server=Server
 label.service.offering=Service-Angebot
-label.system.service.offering=System-Service-Angebot
 label.session.expired=Sitzung abgelaufen
 label.shared=Gemeinsame
-label.size=Größe
+label.show.ingress.rule=Zeige Regeln, die den Zutritt steuern
+label.size=Gr\u00F6\u00DFe
+label.snapshot=Schnappschuss
 label.snapshot.limits=Schnappschuss Grenzen
 label.snapshot.name=Schnappschuss Name
-label.snapshot.s=Schnappschuss (Schnappschüsse)
-# label.snapshot.schedule=Setup Recurring Snapshot
-label.snapshot=Schnappschuss
-label.snapshots=Schnappschüsse
-# label.source.nat=Source NAT
-# label.specify.vlan=Specify VLAN
-# label.start.port=Start Port
-# label.state=State
-# label.static.nat.to=Static NAT to
+label.snapshot.s=Schnappschuss (Schnappsch\u00FCsse)
+label.snapshots=Schnappsch\u00FCsse
 label.static.nat=Statische NAT
 label.statistics=Statistiken
 label.status=Status
-# label.step.1.title=Step 1\: <strong>Select a Template</strong>
 label.step.1=Schritt 1
-# label.step.2.title=Step 2\: <strong>Service Offering</strong>
 label.step.2=Schritt 2
-# label.step.3.title=Step 3\: <strong id\="step3_label">Select a Disk Offering</strong>
 label.step.3=Schritt 3
-# label.step.4.title=Step 4\: <strong>Network</strong>
 label.step.4=Schritt 4
-# label.step.5.title=Step 5\: <strong>Review</strong>
 label.step.5=Schritt 5
+label.sticky.domain=Domain
+label.stop=Stopp
 label.stopped.vms=Gestoppte VMs
-label.storage.type=Speichertyp
 label.storage=Speicherung
-label.submit=Überreichen
-# label.submitted.by=[Submitted by\: <span id\="submitted_by"></span>]
+label.storage.tags=Datenspeicher-Markierung
+label.storage.type=Speichertyp
+label.submit=\u00DCberreichen
 label.succeeded=Erfolgreich
 label.sunday=Sonntag
-# label.system.capacity=System Capacity
-label.system.vm.type=System VM Typ
+label.system.service.offering=System-Service-Angebot
 label.system.vm=System-VM
+label.system.vm.type=System VM Typ
 label.system.vms=System VMs
 label.tagged=Markiert
 label.tags=Markierungen
 label.target.iqn=Ziel IQN
-label.template.limits=Vorlagen Grenzen
 label.template=Vorlage
+label.template.limits=Vorlagen Grenzen
 label.theme.default=Motiv-Standardeinstellung
 label.theme.grey=personalisiertes - grau
 label.theme.lightblue=personalisiertes - hellblau
 label.thursday=Donnerstag
-label.time.zone=Zeitzone
 label.time=Zeit
-# label.timeout.in.second = Timeout(seconds)
+label.time.zone=Zeitzone
 label.timezone=Zeitzone
+label.total.CPU=Gesamtanzahl CPU
 label.total.cpu=Gesamtanzahl CPU
 label.total.vms=Insgesamte VMs
 label.traffic.type=Traffic Typ
 label.tuesday=Dienstag
-label.type.id=Typ ID
 label.type=Typ
-label.unavailable=nichtverfügbar
-label.unlimited=uneingeschränkt
+label.type.id=Typ ID
+label.unavailable=nichtverf\u00FCgbar
+label.unlimited=uneingeschr\u00E4nkt
 label.untagged=Unmarkiert
-# label.update.ssl.cert= SSL Certificate
-# label.update.ssl= SSL Certificate
 label.updating=Aktualisierung
 label.url=URL
-# label.usage.interface=Usage Interface
 label.used=Gebraucht
 label.user=Benutzer
 label.username=Benutzername
@@ -1377,171 +618,123 @@ label.vcenter.host=vCenter Host
 label.vcenter.password=vCenter Passwort
 label.vcenter.username=vCenter Benutzername
 label.version=Version
-# label.virtual.appliance=Virtual Appliance
-# label.virtual.appliances=Virtual Appliances
 label.virtual.network=Virtuelles Netzwerk
+label.vlan=VLAN
 label.vlan.id=VLAN ID
 label.vlan.range=VLAN Reichweite
-label.vm.add=Instanz hinzufügen
-label.vm.destroy=Zerstören
+label.vm.add=Instanz hinzuf\u00FCgen
+label.vm.destroy=Zerst\u00F6ren
 label.vm.reboot=Neustart
 label.vm.start=Start
 label.vm.stop=Stopp
 label.vmfs=VMFS
 label.vms=VMs
+label.volume=Volume
 label.volume.limits=Volume Grenzen
 label.volume.name=Volume Name
-label.volume=Volume
 label.volumes=Volumes
-# label.vsphere.managed=vSphere Managed
+label.vpn=VPN
 label.waiting=Warten
 label.warn=Warnen
 label.wednesday=Mittwoch
-label.weekly=Wöchentlich
-# label.welcome.cloud.console=Welcome to Management Console
+label.weekly=W\u00F6chentlich
 label.welcome=Willkommen
 label.yes=Ja
-label.zone.id=Zone ID
-# label.zone.step.1.title=Step 1\: <strong>Select a Network</strong>
-# label.zone.step.2.title=Step 2\: <strong>Add a Zone</strong>
-# label.zone.step.3.title=Step 3\: <strong>Add a Pod</strong>
-# label.zone.step.4.title=Step 4\: <strong>Add an IP range</strong>
-# label.zone.wide=Zone-Wide
 label.zone=Zone
-
-#Messages
-message.acquire.public.ip=Bitte wählen Sie eine Zone, von der Sie Ihre neue IP erlangen möchten.
-message.action.cancel.maintenance.mode=Bitte bestätigen Sie, dass Sie die Wartung abbrechen möchten.
-message.action.cancel.maintenance=Ihr Host ist erfolgreich für die Wartung abgebrochen. Dieser Prozess kann ein paar Minuten dauern.
-message.action.delete.ISO.for.all.zones=Die ISO gilt für alle Zonen. Bitt

<TRUNCATED>

Mime
View raw message